Related
First of all I just bought Global Moto G 2014 (XT1063) from US Amazon and that was KXH21.85-23 (not updatable to Lollipop via shared OTA.)
So I did manage to unlocked the bootloader and flashed KXH21.85-17 and tried to flash the "Blur_Version.21.11.17.titan_retuglb.retuglb.en.US" which supposed to flash the Lollipop.
Unfortunately at first it failed to update me because "Printspooler.apk" mismatch the hash check. After attempt to flash (yes, I ignore the abort message and redo the process, It passed.... I don't know why) and stuck at some "xxx.apk" mismatch the hash again. After redo the process and bypass (for unknown reason that redo bypass the mismatch) I stuck at "velvet.apk" mismatch and this time It won't let me bypass and keep going on update to lollipop.
In my theory, Is it possible that I flash KXH21.85-17 from other country? Yes, any XT1063 (latin american, whereever on earth) supposed to flashable, but maybe the different country has slightly different apk. So that's why I failed the hash check.
Can anyone give me a URL or mirror to USA XT1063 for KXH21.85-17 that confirmed updatable to Lollipop? Since SBF-Dev and MotoFirmware is now down I couldn't find any.
I know what I'm saying is sound ridiculous, but I have no other theory that support my conspiracy anymore.
Hi @bankkung, I was facing similar problems. First you'd want to get back to stock kitkat which is up-gradable to Lollipop, so I would suggest downloading this file, http://180upload.com/bzl3ah1wov5g, which is 21.85-17, you can flash this file with fastboot by following this guide http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340. Next you'd want to download both Lollipop files, the first and second one. (The second one is the newest update that fixes memory management). First file: https://mega.co.nz/#!UoQ02KLQ!22OUNBctGLoAUOMd_frTRT9jgbB3tRPUa4pPqfesGho.. Second file: https://mega.co.nz/#!s8ZSVJDA!SqUWPZODvM4-GYuXo6MC2JWTmpE9_jdyqlH-ycWi78I. Download both of those files and put them somewhere accessible (like your SD card) so you can flash these in stock recovery, so after you downgrade to kitkat you can flash the first one, then boot up and then go back into stock recovery and flash the second file. I'd recommend factory resetting your phone after this to smoothen everything out.
If all else fails you can flash TWRP recovery using this guide http://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165, and then download this TWRP backup of the latest Lollipop, and place it in /data/media/0/TWRP/backups/(your device name here). All of that can be done right in TWRP recovery using the file manager (no need to root your phone). https://mega.co.nz/#!59AAiQaR!cPUsNpI5j-ZaIMX10uiS93EJqpLxua-iwKHj30InX1U
I would really recommend the first option tho, just in case any other updates come you can easily upgrade your phone.
Hope I helped!
Lamech242 said:
Hi @bankkungFirst you'd want to get back to stock kitkat which is up-gradable to Lollipop, so I would suggest downloading this file, http://180upload.com/bzl3ah1wov5g, which is 21.85-17, you can flash this file with fastboot by following this guide http://forum.xda-developers.com/moto-g-2014/general/index-guide-update-to-lollipop-android-t2941340. Next you'd want to download both Lollipop files, the first and second one. (The second one is the newest update that fixes memory management). First file: https://mega.co.nz/#!UoQ02KLQ!22OUNBctGLoAUOMd_frTRT9jgbB3tRPUa4pPqfesGho.. Second file: https://mega.co.nz/#!s8ZSVJDA!SqUWPZODvM4-GYuXo6MC2JWTmpE9_jdyqlH-ycWi78I. Download both of those files and put them somewhere accessible (like your SD card) so you can flash these in stock recovery, so after you downgrade to kitkat you can flash the first one, then boot up and then go back into stock recovery and flash the second file. I'd recommend factory resetting your phone after this to smoothen everything out.
Click to expand...
Click to collapse
Hi Thanks for your help
I've done that several time and still having the same problem (yes, mine is unlocked bootloader and flashed-reflashed that 21.85-17 over twenty time right now)
Lamech242 said:
If all else fails you can flash TWRP recovery using this guide http://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165, and then download this TWRP backup of the latest Lollipop, and place it in /data/media/0/TWRP/backups/(your device name here). All of that can be done right in TWRP recovery using the file manager (no need to root your phone). https://mega.co.nz/#!59AAiQaR!cPUsNpI5j-ZaIMX10uiS93EJqpLxua-iwKHj30InX1U
I would really recommend the first option tho, just in case any other updates come you can easily upgrade your phone.
Hope I helped!
Click to expand...
Click to collapse
I'm thinking about getting some Nandroid backup (never used TWRP before but I think this methond you gave is the same thing as I think) to get straight from Custom Recovery to Lollipop.
So what I need to do in the 2nd method is
a
flash TWRP
Place TWRP Backup of XT1063 Lollipop
restore
reflash Stock Recovery + Locked recovery
Is this sound corrected?
bankkung said:
Hi Thanks for your help
I've done that several time and still having the same problem (yes, mine is unlocked bootloader and flashed-reflashed that 21.85-17 over twenty time right now)
I'm thinking about getting some Nandroid backup (never used TWRP before but I think this methond you gave is the same thing as I think) to get straight from Custom Recovery to Lollipop.
So what I need to do in the 2nd method is
a
flash TWRP
Place TWRP Backup of XT1063 Lollipop
restore
reflash Stock Recovery + Locked recovery
Is this sound corrected?
Click to expand...
Click to collapse
Yes once you place the backup on your SD card, flash TWRP, reboot into recovery and go to advanced then go to file manager, then finish following the instructions above. Once you place it in the right place then you restore it. As of the stock recovery issue, it wouldn't make much sense to do that unless you followed the first option, where the stock recovery would actually be needed. But if you find a recovery image then yeah. If you do the second method you won't be able to receive updates nor update it manually unless doing the first method.. But the TWRP backup is the latest lollipop so enjoy!
If you still need help you can just flash TWRP recovery, and download this and flash it. http://forum.xda-developers.com/mot...-stock-rom-t2970427/post57438355#post57438355
Hello!
I rooted my phone early on in it's lifetime, but lost the DRM keys right away (didn't check that TA-Backup actually backed the keys before I rooted).
Then, at some point, I flashed a stock ROM (5.0 or something) and have been using that for a year or so now.
Now I decided I wanted Marshmallow, so I followed this guide since I've already lost my DRM key.
First question: Am I wrong to assume that I can follow this less complicated guide if I've lost the key, instead of flashing the older ROM and using the exploit as this guide suggests?
So I flashed the .291 FW on my Z3 Compact (D5803 as I'm from Sweden), locked the bootloader, started it up (the guide says to update to the latest, but since this is the latest FW there are only app-updates, correct?), put the "SuperSU 2.76" and "THSxEXR DRM Fix" in the internal storage, unlocked bootloader.
(I also put the xposed-v86 zip there too, but I'm unsure what that one actually does and if I need it so I probably won't install it)
So far so good, correct?
Now, I downloaded the latest TWRP, 3.0.2 for z3c, and renamed it to recovery.img.
And I've tried every combination here:
fastboot flash recovery recovery.img
fastboot boot recovery.img
and also
fastboot flash boot recovery.img
The top two does not work, it seems. When I boot into recovery, I simply get a black screen (with backlight, as if the screen was on) and nothing else.
But, if I flash "boot" with recovery.img, I am able to access TWRP. Ofcourse, I'm not able to boot normally at this point but it seems weird to me.
Any help here?
Fooughhy said:
Any help here?
Click to expand...
Click to collapse
Have you tried Flashfire. It can flash roms and zips without recovery
No, but since I can't get into recovery, I can't flash SuperSU and get root. And from what I can tell, Flashfire requires root access.
Try flashing it to FOTAKernel using fastboot
No, I haven't. The website seems a bit confusing to me and I can't seem to figure out what to download...
But all files seem to be recovery.img, so am I supposed to simply flash recovery with that image?
I downloaded from the hammerhead folder, as from a quick glance that seemed to newest recovery release of twrp on that site. But "sirius" seems to be the actual newest. Do you know what I should download?
In this thread, the OP expects you to know how to do things, but gives a basic example of the ADB commands. Can I use those commands?
As you can see, I'm quite inexperienced with this bit I'd like to learn!
Hello,
i'm having a similar issue. I upgraded to MM, flashed Kernel 575, installed TWRP, installed SuperSU and Xposed, flashed back kernel 291 and everything works fine (still have my DRM keys). Only it is impossible to boot to recovery. Only once right after the installation it went to TWRP.
Since I haven't found any other information on this and this is the only case where someone has the same problem AND installed xposed-v86... could it be related to xposed?
Fooughhy said:
No, I haven't. The website seems a bit confusing to me and I can't seem to figure out what to download...
But all files seem to be recovery.img, so am I supposed to simply flash recovery with that image?
I downloaded from the hammerhead folder, as from a quick glance that seemed to newest recovery release of twrp on that site. But "sirius" seems to be the actual newest. Do you know what I should download?
In this thread, the OP expects you to know how to do things, but gives a basic example of the ADB commands. Can I use those commands?
As you can see, I'm quite inexperienced with this bit I'd like to learn!
Click to expand...
Click to collapse
Hammerhead? Isn't that the codename for the Nexus 5?
As well the codename for the Z3c is Aries
AFAIK "hammerhead" is the codename for Nexus 5X not for Z3C which is Aries. It seems you may have downloaded a wrong version of TWRP which might be the reason for you to get a black screen when you boot into TWRP. After you download the correct version of the TWRP and renaming it to "recovery.img", try doing this through ADB:
fastboot flash recovery recovery.img
fastboot reboot recovery
It should boot into TWRP.
EDIT: Also you have followed the procedure for the "CONCEPT ROM", not the Stock one. .291 is Stock Marshmallow, while the link you provided directs us to the Concept unlocking etc.
marshalpear said:
AFAIK "hammerhead" is the codename for Nexus 5X not for Z3C which is Aries. It seems you may have downloaded a wrong version of TWRP which might be the reason for you to get a black screen when you boot into TWRP. After you download the correct version of the TWRP and renaming it to "recovery.img", try doing this through ADB:
fastboot flash recovery recovery.img
fastboot reboot recovery
It should boot into TWRP.
EDIT: Also you have followed the procedure for the "CONCEPT ROM", not the Stock one. .291 is Stock Marshmallow, while the link you provided directs us to the Concept unlocking etc.
Click to expand...
Click to collapse
Hammerhead is actually Nexus 5, but nevertheless that doesn't change the fact that he downloaded wrong one Or did he? In OP he wrote he downloaded TWRP for z3c so I assume that it was the correct one. But I'm just not sure that it's as simple as that to flash TWRP and root device with LB without any extra step before or in between.
Seeing that he already lost TA partition, it would be much easier to go with UBL and loading TWRP/rooting. I don't understand the re-locking part But then again, he indeed followed the wrong thread
THIS APPLIES ONLY TO THE A2017U VARIANT, DO NOT USE THIS FILE ON OTHER VERSIONS
Disclaimer - don't blame me if something goes wrong
As title says, this is a full stock unmodified B20 TWRP system image. It kan be used in addition to stock boot and recovery images to restore the US A7 to conditions which will be like stock and allow to flash upcoming OTA. This was tested by @jkuczera here http://forum.xda-developers.com/showthread.php?t=3459107
Link to system image
https://cloud.swehes.com/index.php/s/31V7GgihohBCdfy
If you are BL unlocked, you will need to lock it before flashing old recovery and boot (this may not be necessary to get MR2 to flash, depending on what it checks, but the phone might not boot, unknown). This will make your phone verify boot, recovery and /system again, so flash TWRP from tenfar's thread to be able boot after relocking since his is signed
To restore, unzip the file above to TWRP folder on the SD Card, then in TWRP under mount points unmount /system and put check mark on mount system as read-only. The read-only part is important so that TWRP does not modify the /system apon exit. You can then restore boot, recovery and system image.
Another partition, fastboot, was altered if you applied B20_boot, but so far no OTA has check it so it should be fine as is. Chance is it will be just overwritten by next OTA, but in case that changes, info will be added. This step is more risky since it involves using dd command and has to be applied carefully.
EDIT: looks like @Unjustified Dev posted new build that will flash fastboot image http://forum.xda-developers.com/showpost.php?p=68677272&postcount=133
You should then boot to stock recovery and factory wipe
In case you did not dump your boot and recovery, they can be found in @rczrider's post here
http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818
Thanks to @swehes for providing the space on his cloud for this file, @rczrider for rest of the files and @jkuczera for trying this all out
So you need TWRP for this, but will this overwrite the TWRP recovery and make it truly stock?
imp3r10 said:
So you need TWRP for this, but will this overwrite the TWRP recovery and make it truly stock?
Click to expand...
Click to collapse
Indeed and before rebooting , you MUST Wipe Data + Internal Storage, cuz you are flashing new boot and system and will get in conflicts if there no wipe.
Just for clarity sake these are the steps I need to take to get back to B20 from B20_Boot?
1. fastboot oem lock
2. put system image from OP's post AND stock_boot_backup.img AND stock_recovery_backup.img from rczrider's post into TWRP folder.
3. in TWRP unmount /system and check mark on mount system as read only.
4. Flash boot, recovery, and system image.
5. Wipe Data and Internal Storage.
6. Profit?
runderekrun said:
Just for clarity sake these are the steps I need to take to get back to B20 from B20_Boot?
1. fastboot oem lock
2. put system image from OP's post AND stock_boot_backup.img AND stock_recovery_backup.img from rczrider's post into TWRP folder.
3. in TWRP unmount /system and check mark on mount system as read only.
4. Flash boot, recovery, and system image.
5. Wipe Data and Internal Storage.
6. Profit?
Click to expand...
Click to collapse
Pretty much. I would reboot to stock recovery after and factory wipe from there. you might wan't to flash fastboot from B20 OTA for extra profit but seems like it's a moot point so far if you have seen the Unjustified Devs trick for BL unlock via TWRP
peramikic said:
Pretty much. I would reboot to stock recovery after and factory wipe from there. you might wan't to flash fastboot from B20 OTA for extra profit but seems like it's a moot point so far if you have seen the Unjustified Devs trick for BL unlock via TWRP
Click to expand...
Click to collapse
Thanks.
I'm having to do a warranty replacement on my device so i'll probably want to do the fastboot flash. Any idea where to get a fastboot image?
runderekrun said:
I'm having to do a warranty replacement on my device so i'll probably want to do the fastboot flash. Any idea where to get a fastboot image?
Click to expand...
Click to collapse
Step 6 to pull your own: http://forum.xda-developers.com/axon-7/how-to/guide-how-to-unlock-bootloader-stay-t3461165
Or you can download the one I pulled from my device (it can be found in the Mega folder linked in the OP): http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818
And as option 3 it's inside the B18toB20 OTA file floating somewhere around here
Alright I tried this and something went wrong.
First thing I did was copy all the files where they needed to be. Then I booted into fastboot and did a "fastboot oem lock".
Then my device would do nothing. I would boot up to the ZTE logo then go black a second later. I tried to force into recovery by selecting recovery in fastboot but same thing, ZTE logo then blackness.
I got it back by getting into fastboot and performing a "fastboot oem unlock" again. All it did was wipe data.
What did I do wrong? I thought I am supposed to lock bootloader first before I restore system and flash recover and boot????
runderekrun said:
Alright I tried this and something went wrong.
First thing I did was copy all the files where they needed to be. Then I booted into fastboot and did a "fastboot oem lock".
Then my device would do nothing. I would boot up to the ZTE logo then go black a second later. I tried to force into recovery by selecting recovery in fastboot but same thing, ZTE logo then blackness.
I got it back by getting into fastboot and performing a "fastboot oem unlock" again. All it did was wipe data.
What did I do wrong? I thought I am supposed to lock bootloader first before I restore system and flash recover and boot????
Click to expand...
Click to collapse
Ok so if you modified boot, system or recovery in anyway then after BL lock it will not boot since it will fail secure boot, so you need to load the signed TWRP from tenfar's thread via EDL after locking. That will let you run TWRP with locked BL. Although ig you just want stock for upcoming OTA, then you might be good staying unlocked. If for return, then you should lock it
peramikic said:
Ok so if you modified boot, system or recovery in anyway then after BL lock it will not boot since it will fail secure boot, so you need to load the signed TWRP from tenfar's thread via EDL after locking. That will let you run TWRP with locked BL. Although ig you just want stock for upcoming OTA, then you might be good staying unlocked. If for return, then you should lock it
Click to expand...
Click to collapse
I apologize if I am fundamentaly not understanding this but wouldn't it be easier to flash system, boot, recovery, and fastboot back to stock via my current twrp THEN relock bootloader?
runderekrun said:
I apologize if I am fundamentaly not understanding this but wouldn't it be easier to flash system, boot, recovery, and fastboot back to stock via my current twrp THEN relock bootloader?
Click to expand...
Click to collapse
Yeah, now that we know fastboot will work even on stock boot that will work as well. The only thing you won't be able to do is flash back the B20 fastboot image that way, but enough to pass OTA most likely. The long way you can revert the fastboot image as well. I only wanted to post the image to begin with, but then wrote out instruction as they rolled around in my head. This will change soon anyways so a proper write-up will happen, just not by me, Documentation was never my forte
My BL is unlocked from ZTE right now, If I want to get CM for future but also want upcoming update from ZTE? What are the exact steps that I need to follow to get future OTA but also keep the BL unlocked for future CM? Please help as I'm confused with all these instructions.
peramikic said:
THIS APPLIES ONLY TO THE A2017U VARIANT, DO NOT USE THIS FILE ON OTHER VERSIONS
Disclaimer - don't blame me if something goes wrong
As title says, this is a full stock unmodified B20 TWRP system image. It kan be used in addition to stock boot and recovery images to restore the US A7 to conditions which will be like stock and allow to flash upcoming OTA. This was tested by @jkuczera here http://forum.xda-developers.com/showthread.php?t=3459107
Link to system image
https://cloud.swehes.com/index.php/s/31V7GgihohBCdfy
If you are BL unlocked, you will need to lock it before flashing old recovery and boot (this may not be necessary to get MR2 to flash, depending on what it checks, but the phone might not boot, unknown). This will make your phone verify boot, recovery and /system again, so flash TWRP from tenfar's thread to be able boot after relocking since his is signed
To restore, unzip the file above to TWRP folder on the SD Card, then in TWRP under mount points unmount /system and put check mark on mount system as read-only. The read-only part is important so that TWRP does not modify the /system apon exit. You can then restore boot, recovery and system image.
Another partition, fastboot, was altered if you applied B20_boot, but so far no OTA has check it so it should be fine as is. Chance is it will be just overwritten by next OTA, but in case that changes, info will be added. This step is more risky since it involves using dd command and has to be applied carefully.
EDIT: looks like @Unjustified Dev posted new build that will flash fastboot image http://forum.xda-developers.com/showpost.php?p=68677272&postcount=133
You should then boot to stock recovery and factory wipe
In case you did not dump your boot and recovery, they can be found in @rczrider's post here
http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818
Thanks to @swehes for providing the space on his cloud for this file, @rczrider for rest of the files and @jkuczera for trying this all out
Click to expand...
Click to collapse
Can someone please explain exactly how to do this. I have an unofficial twrp on my phone and the bootloader is unlocked but after i tried to flash super su it got stuck on bootloop so I wiped every thing and I also accidentally wiped my os too. So now I don't have an os and I want to go back to stock. Can someone please explain step by step on how to fix this? I just got the phone.
seby1234 said:
Can someone please explain exactly how to do this. I have an unofficial twrp on my phone and the bootloader is unlocked but after i tried to flash super su it got stuck on bootloop so I wiped every thing and I also accidentally wiped my os too. So now I don't have an os and I want to go back to stock. Can someone please explain step by step on how to fix this? I just got the phone.
Click to expand...
Click to collapse
All right I'm no expert either but I'll try to make this as straightforward as possible.
1) Format your SD card as exFAT. This is important as otherwise you will not be able to transfer the system image to your SD card since it is 6GB. To do this you can just plug it in to your PC, right click, Format and then select exFAT from the dropdown.
2) Download tenfar's tool for B20, rczrider's boot and recovery backup, and the system image backup from the link in the OP.
3) Create a new folder in /external_sd/TWRP/BACKUPS/serial_number/.Move the stock_boot_backup and stock_recovery backup into the folder.
4) Using a program such as 7zip, extract the 6GB system image file and move it to the same folder.
6) Go to into fastboot mode. Before you do anything you have to relock the bootloader otherwise the system will be modified and you want to be 100? stock. Execute 'fastboot oem lock'. You should then boot to a black screen.
7) Unzip tenfar's tool. Go to the unzipped folder, then hold down shift+right click and select 'Open command window here'. Execute 'axon7root.exe -p [COMPORT #] -r. To figure out your com port #, go to Device Manager, then go to down to where it says "Qualcomm Loader..." and your com port number is the number at the end. So for example if your com port number is 5, you should execute axon7root.exe -p 5 -r. Allow the program to do its thing.
5) Boot into TWRP. Do not swipe to allow modifications. Once in TWRP, go to "Install", "Install Image" at the bottom right hand corner, and then navigate to the stock_recovery_backup in the folder that you moved it to to. Select it and then choose the Recovery partition to flash it to. Do the same thing for stock_boot_backup.
6) Once you have flashed boot and recovery, go to the main menu, then "Restore" and then Restore the system image backup.
7) Go to wipe and then slide to factory reset. Finally, reboot system.
Hope that helps! If you have any questions, feel free to ask me.
rczrider's stock boot and recovery thread
http://forum.xda-developers.com/axon-7/development/untouched-b20-boot-recovery-files-t3443818/page7
tenfar's tool thread: http://forum.xda-developers.com/axo...xon-7-root-bootloader-unlokced-t3441204/page1
Has anyone who requested the bootloader unlock from ZTE (and mistakenly installed it) returned to stock and been able to get OTA's? I followed this guide and seemed to have returned to stock fine but the only OTA I can get now is the bootloader unlock OTA. I've downloaded and discarded it several times but that is the only one I can get. Anyone know of a way to bypass this OTA and get the new MR2 that was just released? I want to get OTA's until the custom roms start flowing.
Thanks!
shifuharris said:
Has anyone who requested the bootloader unlock from ZTE (and mistakenly installed it) returned to stock and been able to get OTA's? I followed this guide and seemed to have returned to stock fine but the only OTA I can get now is the bootloader unlock OTA. I've downloaded and discarded it several times but that is the only one I can get. Anyone know of a way to bypass this OTA and get the new MR2 that was just released? I want to get OTA's until the custom roms start flowing.
Thanks!
Click to expand...
Click to collapse
From what I can tell, once you apply for official bootloader unlock, your IMEI is placed on a list that will not get any future OTA updates set to it.
However, the OTA for B20 to B27 has been uploaded here: https://mega.nz/#F!kYtRAJjJ!5tD1zPpo0nw2tJwhANA9pQ
Try flashing that via stock recovery.
Quick question for anyone who might know.
The Link to system image which is : https://cloud.swehes.com/index.php/s/31V7GgihohBCdfy has the following;
1. system_image.emmc.win
2. system_image.emmc.win.md5
Am I suppose to rename system_image.emmc.win to system_image.emmc.img and load?
it's not as clear that's why I ask but I ended up downloading rczrider system.img and reflashed via TWRP since I was a bit confused.
Thanks!
***************
I simply just went into TWRP backed up by boot so it would create a directory that contains the info I needed copied the system_image.emmc.win and system_image.emmc.win.md5 and restored.
xtermmin said:
From what I can tell, once you apply for official bootloader unlock, your IMEI is placed on a list that will not get any future OTA updates set to it.
However, the OTA for B20 to B27 has been uploaded here: https://mega.nz/#F!kYtRAJjJ!5tD1zPpo0nw2tJwhANA9pQ
Try flashing that via stock recovery.
Click to expand...
Click to collapse
I suspected as much. I downloaded the update and tried to flash it via the stock recovery using the update for ADB option but it fails saying that the package is not a ks package. Booooo. I really wanted this MR becasue they addressed the weak cell signal which I think contributes significantly to my battery drain. Not sure if there are any alternatives to get the update installed. Not very a happy about the ceased OTA's due to the bootloader unlock. Thinking the new Nexus (or whatever they are going to call them) is looking pretty good at the moment.
shifuharris said:
I suspected as much. I downloaded the update and tried to flash it via the stock recovery using the update for ADB option but it fails saying that the package is not a ks package. Booooo. I really wanted this MR becasue they addressed the weak cell signal which I think contributes significantly to my battery drain. Not sure if there are any alternatives to get the update installed. Not very a happy about the ceased OTA's due to the bootloader unlock. Thinking the new Nexus (or whatever they are going to call them) is looking pretty good at the moment.
Click to expand...
Click to collapse
Try the microSD card method instead.
First, make sure OEM Unlocking is checked in developer settings, rename the OTA to "update.zip", put on microSD, boot into stock recovery, and choose update from microSD.
TLDR: It's here and it may eat your data, and you will lose SuperSU root if currently installed. READ the install instructions carefully!
Pixel XL
Pixel
DO NOT RESTORE DATA FROM alpha builds of TWRP using RC1. You will probably lose all data including internal storage. If you need to restore a data backup from an alpha build, reinstall the alpha and restore using the alpha and make a new backup using RC1.
Note: Do not use if you have multiple users (including a guest user)
File Based Encryption (FBE) can be a bit tricky. If a restore doesn't work correctly, it can trigger an automatic wipe of your data. Sometimes TWRP will fail to prompt you to enter your password or otherwise fail to set up decrypt properly. If this happens, reboot TWRP. It seems to be some kind of timing issue and I haven't had time to track it down yet.
Pixel devices have 2 "slots" for ROMs / firmware. TWRP will detect whichever slot is currently active and use that slot for backup AND restore. There are buttons on the reboot page and under backup -> options to change slots. Changing the active slot will cause TWRP to switch which slot that TWRP is backing up or restoring. You can make a backup of slot A, switch to B, then restore the backup which will restore the backup of A to slot B. Changing the slot in TWRP also tells the bootloader to boot that slot.
The zip install method installs TWRP to both slots.
Installation:
If you already have TWRP installed: Download the latest zip and install the zip using TWRP.
If you do not already have TWRP installed: Download both the img and the zip. Copy the zip to your device. You will need to have fastboot binaries and the correct drivers installed. Power off your device completely. Hold volume down and turn on the device. Your device should now be in the bootloader. Connect the device to your PC. Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. If you are using a lockscreen pin/pattern/password and do not get prompted to enter your passord, reboot to the bootloader and try again. Go to install and browse to the zip and install the zip. If you are currently rooted with SuperSU, you will need to reflash the stock boot image before installing TWRP. After installing the stock boot image, follow the instructions for installing TWRP. Once TWRP is installed, grab the very latest SuperSU released on 2015-11-15 or later and install SuperSU.
If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest factory image for your device and reflash the boot image.
NOTE about 3.2.1-0: This version will decrypt Android 8.1, however the new image is built in Android 8.1 and may not be compatible with SuperSU and/or Magisk until they update their stuff. I have not tested. Good luck.
3.2.1-1 has working decrypt with the February security patch!
3.2.1-2 fixes some zip install errors
3.2.3-1 supports decrypting Android 9.0 Pie even with a pin / pattern / password set
How to install SuperSU SR5 on TWRP RC1: In TWRP tap on Advanced -> File Manager and scroll to and select the fstab.marlin or fstab.sailfish file and then delete it.
Amazing work sir! I think this is what we've all been waiting for! I mean I know I've been checking here frequently, hoping for this
Wow and so it begins, great work thanks!
Thanks
Sent from my Pixel using XDA-Developers mobile app
has anyone got the zip installed? when i boot into twrp.img everything is encrypted? im 100% stock as well
Dees_Troy said:
Note: I am going to be very busy the next couple of weeks. I probably won't be able to answer your questions or fix things immediately.
Click to expand...
Click to collapse
the pixel installer.zip is corrupt. :crying:
Really looking forward to having this and SuperSU working together. After that, I just need things to flash. Been going crazy not being able to appeasey crack flashing addiction.
GeekMcLeod said:
Really looking forward to having this and SuperSU working together. After that, I just need things to flash. Been going crazy not being able to appeasey crack flashing addiction.
Click to expand...
Click to collapse
Do you happen to have a copy of the .zip? All the ones I download are corrupt...
zaksimmermon said:
Do you happen to have a copy of the .zip? All the ones I download are corrupt...
Click to expand...
Click to collapse
No I haven't downloaded anything yet. Not going to until I can have supersu alongside twrp.
Why does installation of this remove SuperSU?
Aren't they supposed to be used side-by-side?
And it also warns not to install if expecting important calls.
Does it prevent the phone apps from operating or what?
I understand everything else.
Snowby123 said:
Why does installation of this remove SuperSU?
Aren't they supposed to be used side-by-side?
And it also warns not to install if expecting important calls.
Does it prevent the phone apps from operating or what?
I understand everything else.
Click to expand...
Click to collapse
"In other words, Chainfire's systemless root method modifies the same binary that TWRP needs to modify in order to get data decryption working. Therefore, when you flash TWRP you are overwriting the changes made to the init binary by Chainfire's systemless root method. While this is a minor setback, thanks to the dual partition nature of the Pixel (and future devices shipping with Nougat), TWRP has some nifty new capabilities."
I'm pretty sure he's just saying dont chance something going wrong like it bootlooping or wiping data if you need your phone for something important like a phone call. Tough to answer said phonecall in a boot loop.
zaksimmermon said:
has anyone got the zip installed? when i boot into twrp.img everything is encrypted? im 100% stock as well
Click to expand...
Click to collapse
I get exactly the same. Even after several attempts at booting the img, i don't get prompted to enter the PIN / passphrase as stated in instructions hence why the data is encrypted i presume.
rtthane said:
I get exactly the same. Even after several attempts at booting the img, i don't get prompted to enter the PIN / passphrase as stated in instructions hence why the data is encrypted i presume.
Click to expand...
Click to collapse
I finally got passed that issue. I had to flash factory images and erase everything to the point of being at setup screen. I didn't set anything up, no network or wifi, skipped Google sign in, no password and also no Google functions activated. This led to an unencrypted setup, so after turning on dev settings and Android debugging I booted up the image. Now my issue is the zip to install twrp for sailfish is corrupt and if you try to unzip it there are no files in it....I downloaded the marline zip and there are files when unzipped....
Maybe I'm an asshole but I cNt for the life of me flash this I download the .IMG I even changed name to TWRP.img but it won't flash boot at all just an error hmmmmm maybe I'm just dumb?
ne0ns4l4m4nder said:
Maybe I'm an asshole but I cNt for the life of me flash this I download the .IMG I even changed name to TWRP.img but it won't flash boot at all just an error hmmmmm maybe I'm just dumb?
Click to expand...
Click to collapse
Are you trying to fastboot flash or fastboot boot?
Sent from my Pixel using Tapatalk
Guys, check out super su and root in xl thread. New Super su posted by chain fire to work with twrp.
fracman said:
Guys, check out super su and root in xl thread. New Super su posted by chain fire to work with twrp.
Click to expand...
Click to collapse
Posted on standard pixel SU thread as well. Now if only I could make sense on the steps I need to take. This dual partition issue is throwing me off
ej_424 said:
Posted on standard pixel SU thread as well. Now if only I could make sense on the steps I need to take. This dual partition issue is throwing me off
Click to expand...
Click to collapse
My phone won't be here till tomorrow but as I understand it you need to use these steps (someone correct me if I'm wrong)
Reboot bootloader
Fastboot boot (twrp).img
Reboot recovery
In recovery, flash the twrp flashable .zip file
Reboot recovery
Flash the SuperSU sr4.zip
Reboot
Profit????
BakedTator said:
My phone won't be here till tomorrow but as I understand it you need to use these steps (someone correct me if I'm wrong)
Reboot bootloader
Fastboot boot (twrp).img
Reboot recovery
In recovery, flash the twrp flashable .zip file
Reboot recovery
Flash the SuperSU sr4.zip
Reboot
Profit????
Click to expand...
Click to collapse
OK thanks, wondering if root will work with November update or of I need to roll back first. Prior to SU update today Nov update didn't work with the auto cf root
Hey guys,
I was trying to unlock my phone and install a custom ROM so I installed TWRP and everything was going smooth until I tried installing a custom ROM. In TWRP I hit "Install" and click the zip file for the ROM I want (PureNexus) and it says "Invalid zip file format! Error installing zip file '/sdcard/PureNexus.zip"
Does anyone know what the problem is? I can't figure this out. This is the first time I'm doing anything from the bootloader so I'm a bit of a newb. I would be fine going back to stock everything if it means my phone will turn on. I tried installing the official image from google (7.1.1) and I get the same zip error.
So where I'm at is I do not have an OS installed on but I do have access to TWRP. In the command prompt on my desktop it recognizes my phone when I type 'adb devices' but it doesn't do anything when I type 'fastboot devices'.
Any help is greatly appreciated. I'm scared.
Okay, so I figured out what fastboot was and I was able to install Google's 7.1.1 stock image using the command prompt. I was freaking out for a few hours and even though I didn't get the custom ROM I wanted I'm really happy I didn't brick my phone. I've never done anything like this on my phone so it was a fun learning experience
I'm still curious what I did wrong and why TWRP couldn't unzip any of the zip files (PureNexus, Google Stock, etc). If anyone knows I'm still interested in learning what I did wrong.
Unheard7 said:
... why TWRP couldn't unzip any of the zip files (PureNexus, Google Stock, etc).....
Click to expand...
Click to collapse
TWRP: wrong version or damaged;
ZIP: damaged or incomplete download.
Latest version TWRP is 3.2.1.0.
NLBeev said:
TWRP: wrong version or damaged;
ZIP: damaged or incomplete download.
Latest version TWRP is 3.2.1.0.
Click to expand...
Click to collapse
Yes, and the Google factory image isn't meant to be flashed that way. I guess the Google OTA image might be flashed from TWRP, but I haven't tried it.
TWRP will flash an image (. img) file if you set it to by tapping the img button. If you don't have that set and try to flash an image it will error. If you have it set to img and try to flash a zip it will also error.
1. Unlock the bootloader.
2. Install the latest TWRP recovery.
3. Wipe.
4. Install the required ROM.
To go back to stock firmware, just download the relevant factory firmware zip, extract it and run the script. I think a readme file is provided in the zip explaining how to go about it.
Cheers! Happy New Year!