After my phone tried to auto update, it wasn't able to finish to update.
so i tried to fabric reset it and now i am stuck in the set up process with the just a second screen in an infinite set up loop.
the phone is stock and debug usb and bootloader are locked what can i do??
Vehx35 said:
After my phone tried to auto update, it wasn't able to finish to update.
so i tried to fabric reset it and now i am stuck in the set up process with the just a second screen in an infinite set up loop.
the phone is stock and debug usb and bootloader are locked what can i do??
Click to expand...
Click to collapse
Did you try going into recovery and factory resetting from there?
Related
I have been flashing roms to my rhodium with no problem. However, recently i reseted my phone and when it turned back on it was in bootloader moder(the tricolor screen) It stays in this screen no matter what I do. I have tried: removing the battery and putting it back on, flashing other roms, flashing stuck rom, and nothing it alway goes back to the bootloader screen. I flash using the sd card method and it goes thru the process of flashing(with the percent bar) It completes the process then i soft reset and back to bootloader!. same thing via usb, it completes the process but then it goes back to bootloader. I am desperate, Please HELP!
My out of the box Nexus 6 is now stuck looping on and off at the Google boot screen after it tried to install the system update.
I've used the toolkit 1.9.8 to go back to stock. It goes thru the steps appearing to show OKAY and finished at each step. It never reboots the phone at the end. I try to force reboot after waiting for several minutes and it still boot loops. I try again the process again and sometimes it loops and a few times it actually starts up to the welcome screen. However, if I try to root or update recovery (using the toolkit), I get the boot looping again.
Did google bork my phone during a failed update? Is there anything else I can do to completely restore the phone? I've also downloaded the images on google and flashed---same boot loop.
Ultimately, my phone is now booting up to the welcome screen as expected and shows LRX21O. BUT, if I try to do anything (root or recovery), boot loop results again.
(I was able to unlock the phone and know about the usb debug and OEM unlock settings in dev menu, fyi).
I got my moto x today, updated it right away to lollipop, then went to work unlocking the bootloader, rooting, and installing TWRP.
All worked great, and then i went into TWRP to do a factory reset so that I could have the setup wizard when i turned my phone back on to set it up.
well after I did a factory wipe in TWRP (now i am thinking maybe i also checked to wipe system as well, but im not positive).
after the factory reset my device boots to the boot screen, and stops on the blue m logo at the end.
So i flashed the stock kitkat images using mfastboot, and it boots to the boot screen and then shuts off, doesnt even hang at the end anymore.
What are my options/ what the hell did i do?
Hi
I have an AT&T XT1058 with locked bootloader, on 4.4.4
I tried to rest it to factory, but it got stuck on 'Erasing...' (with the little droid) for more than an hour, so I reset it.
Since then it won't boot, only keep stuck on 'Erasing...'. I've tried reflashing it with ATT_XT1058_4.4.4-KXA21.12-L1.26_CFC_1FF both using RSD lite and manually using mfastboot, but no luck - the phone still boots to 'Erasing...' and sometimes after that to the recovery.
I didn't find anything in relevant threads. Does anyone have an idea?
Selecting 'Factory' in the bootloader seemed to fix it.
It is more comlicated than that
The phone does boot after selecting 'factory' in bootloader, but only once - turning the phone off and on again brings it back to its 'erasing...' state. Besides that the phone seems to not be able to charge the battery
mokagi said:
It is more comlicated than that
The phone does boot after selecting 'factory' in bootloader, but only once - turning the phone off and on again brings it back to its 'erasing...' state. Besides that the phone seems to not be able to charge the battery
Click to expand...
Click to collapse
Were you able to get this resolved? I have a xt1095 doing the same thing when I flash a stock recovery. Just shows the android guy and just stuck at erasing... When I flash TWRP it doesn't get stuck at the "erasing..." anymore but just boots straight into TWRP.
Sorry for the late response, I missed the notification on your message.
I wasn't able to fix it, returned it to motorola.
Hi,
Some how I turned the FRP lock on and when I restarted my phone on the logo screen it said FRP lock is on and then nothing happened after that.
I googled around and people suggested to update the firmware using Smart Switch. Smart Switch completed its work 100%, but the my phone got stuck on logo screen and nothing happens. After more googling I found this solution: http://forum.xda-developers.com/galaxy-s6/help/sm-g920f-stuck-samsung-logo-5-1-1-update-t3150727
When I try flashing the phone using Odin with the instructions above, it says "Custom Binary(BOOT) Blocked By FRP Lock".
People please help me to resolve my issues:
1. FRP lock is on. How can I disable it?
2. Phone is stuck on logo screen.
Thank you!
Try the smart switch thing again and let it keep loading. can take up to 10 minutes the first time it loading.
tyrone1 said:
Try the smart switch thing again and let it keep loading. can take up to 10 minutes the first time it loading.
Click to expand...
Click to collapse
Before I tried with Odin I had tried multiple times. Still the same issue.
Odin latest firmware and let it boot over 10 min.
Hey! I had the same problem recently but I was be able to recover my phone by, downloading kies 3 (not smart switch) So once that's down open it up and click the "tools tab' and you want to do a "firmware upgrade & installation" now enter your device info, you can get your SN and IMEI numbers by pressing and holding "volume down + home + power" then hit the home button. So use that information and put in kies. Then it will prompt you to boot to recovery but instead boot to download mode and start the process in kies so then just be patient, really patient and might take up to an hour. and good luck! Hope it helps!
I'm in the same situation. I've installed stock firmware with both odin/kies everything was successful, but on boot, it's just stuck on logo. FRP lock is on, but I know the user and pass.. it's a friends phone. How can I enter the account if the device doesn't even boot up... !? I've tried everything I could find on the internet.. nothing worked.. any new ideas? anyone..? thanks.
If a full restore was successful via kies then it should boot up as if it were brand new outta the box.