Database Develop

[Q] SD card not recognized

Hi,
My phone doesn't recognize any SD card. I tried everything in the forums, even "fastboot oem enableqxdm 0", that returns "... OKAY".
If I execute "fastboot oem sdtest" an error message is returned:
... INFO[SD_TRACE] sdcc_init enter.
INFOsdc_ns_reg value=0xFFF60B59
INFO[SD_TRACE] sdcc_open enter.
INFO[SD_TRACE] sdcc_find_card enter.
INFOsdc_ns_reg value=0xFF9E0B58
INFOCmd5 CMD_TIMEOUT
INFOsdcc_poll_status(): status=4 i=2901
INFOCmd5 polling status timed out
etc......
INFOsdcc_poll_status(): status=4 i=2862
INFOCmd1 polling status timed out
INFOSD: CMD1 fail, rc=2 ..
INFO[SD_TRACE] sdcc_find_card leave.
INFO[SD_HW_ERR] SD: No device attached
INFOSD Init eror
INFOSD Read/Write Test fail..
OKAY
Thanks for help. Regards

Have you verified your memory card works in another phone and/or computer? Have you tried another memory card in your phone to see if that is the problem?

bassmadrigal said:
Have you verified your memory card works in another phone and/or computer? Have you tried another memory card in your phone to see if that is the problem?
Click to expand...
Click to collapse
Yes, I tried with different cards that works perfectly en other phones and computers.

Sounds like a hardware problem then. It might just be dirty contacts on the card reader, or it could be something more major. Most likely it will require sending the phone in for repair (unless you are really technical and are willing to take apart the phone yourself).

[Q] No recovery, no OS, "not allow"

Straight to the business.
When I start the phone normally it shows G1 and T-mobile logos and that's it. It's stuck there which means that it doesn't have OS to load.
I wanted to enter recovery by pressing Home + Power buttons but it loads the G1 and T-mobile logos screen.
Next thing. I tried to load DREAIMG.nbh both RC29 and RC7(USA and UK versions). After holding Camera + Power buttons it showed "0002802 not allowed" error and loaded back into bootloader.
Only thing working(if I was doing things the right way) is bootloader(Back + Power buttons).
Info from bootloader:
DREA110 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.23.02
Sep 2 2008
Serial0
Also I tried entering some commands by fastboot.exe but the phone isn't showing up on my computer. I installed both HTC Sync drivers and drivers from SDK Manager.
Question is: How do I install Android on this phone?

Never seen that error message before but I can tell you there aren't fastboot commands available to you with current bootloader so a DREAIMG.nbh is the only thing short of JTAG to bring the phone back
Redownload the nbh
Double check md5sum for match
Be sure its on root of SD card
Be sure card is formatted to fat32
Be sure you don't have too new of SD card or too large (can't remember the limit off hand)
Be sure file is named appropriate
Best of luck!

I tried both 1GB and 2GB memory cards which came with the phones from the network provider. Both double-checked to be formatted to FAT32 files system. Since You demkantor said there are no fastboot commands avaible I will have to ask people about their memory cards and try to install the .nbh file then. I will edit this post after I tried it.
Edit: Tried 2 more cards. No luck.

am i hannah or rhannah?

so if I go to the options > about my phone > and to baseband version it says: m8917_21.24.05.68R
HANNAH_EMEADSDS_CUST
AND WHEN I GO TO FAST BOOT MODE IT SAYs Product/Variant: Hannah XT1924-1 32GB P3
but the thing is when I go to recovery mode (stock btw) it says this: Motorola/rhannah_retail/Hannah
so am I a Hannah or a rhannah?

Aguywithnoskill said:
so if I go to the options > about my phone > and to baseband version it says: m8917_21.24.05.68R
HANNAH_EMEADSDS_CUST
AND WHEN I GO TO FAST BOOT MODE IT SAYs Product/Variant: Hannah XT1924-1 32GB P3
but the thing is when I go to recovery mode (stock btw) it says this: Motorola/rhannah_retail/Hannah
so am I a Hannah or a rhannah?
Click to expand...
Click to collapse
Do you have 2gb ram and 16gb storage? If yes, then it is rhanna.
3gb ram 16/32 GB storage hanna

Rhannah.

CID wrong XROM (0x1) My phone not taking any firmware please help me

Hi there
Guys suddenly my phone restarted, And won't start again the software is missed up I think I tried everything RAW and stock FW ADB and Fastboot QPST and EDL won't fix the problem as I think it's my internal storage is encrypted I use pin lock -_- in TWRP can't read and write on the internal storage it shows internal storage (0) MB can't do anything even external USB not working every format process and erase all fail please advise
do I do the flash steps wrong?
is this a hardware issue?
is the internal storage can be decrypted?
is it because of the lock screen?
what is the reason cause this?

Moto x4. Is it possible to Increase Usable Storage? (has 19/32gb)

I have the moto x4 (payton) with:
STORAGE: 32GB
RAM: 3GB
OS: Linageos 16.0-20200322-NIGHTLY-payton
(android 9)
Bootloader-state: unlocked
Rooted: yes
IP ADDRESS: (Haha just kidding!)
...
ISSUE: It only has 19GB of usable storage;
I Know that I dont get to use the whole 32gb of it because some of it is used by the system and other partitions.
When i checked Settings>Storage info, it shwos that System is using 12GB... 12GB!!
Thats a lot!
I have also the galaxy tab 10.1(16GB) ; also rooted and also on custom rom (lineage 14.1).
it's System uses 4gb.
I love the x4 and just need more space.
QUESTIONS:
1) Is there a way to increase storage space?
2.1) why system using so much space.?
2.2) and is there a 'safe' way to decrease this?