I just installed Global Stable after testing Xiaomi.EU rom, but after install the sensors gyroscope accelerometer, magnetic etc are not working.
I used MiFlash to flash global stable.
Any way to fix it? :crying:
Tks!
Hello, it's a common issue, you have to flash the persist.img file that is included in the fastboot ROM
You need to flash it via TWRP because the file is write protected via ADB
_Nexus8_ said:
Hello, it's a common issue, you have to flash the persist.img file that is included in the fastboot ROM
Click to expand...
Click to collapse
Yes I tryied to flash it unsuccesfully
I using the last TWRP by mauronofrio but I can not mount persist even I select from mount menu, no way to flash it
rocalino said:
Yes I tryied to flash it unsuccesfully
I using the last TWRP by mauronofrio but I can not mount persist even I select from mount menu, no way to flash it
Click to expand...
Click to collapse
Via ADB?
I had the same problem, I had to unlock back the phone, flash a Chinese TWRP and flash the persist.img as an image into the persist partition
Edit : I'm gonna send the right TWRP for that
Edit 2 : here you go, you can flash the persist partition with this one
_Nexus8_ said:
Via ADB?
I had the same problem, I had to unlock back the phone, flash a Chinese TWRP and flash the persist.img as an image into the persist partition
Edit : I'm gonna send the right TWRP for that
Edit 2 : here you go, you can flash the persist partition with this one
Click to expand...
Click to collapse
I want to restore my phone as a factory Global stable, after do that can I flash the original recovery again or entire global stable using xiaomiflash?
Tks for the help
rocalino said:
I want to restore my phone as a factory Global stable, after do that can I flash the original recovery again or entire global stable using xiaomiflash?
Tks for the help
Click to expand...
Click to collapse
Yes you can, and you can relock the bootloader using MiFlash as you said It will be completly stock
But I have to warn you that doing that broke my Widevine L1 certification, and I haven't find a way to get them back yet
_Nexus8_ said:
Yes you can, and you can relock the bootloader using MiFlash as you said It will be completly stock
But I have to warn you that doing that broke my Widevine L1 certification, and I haven't find a way to get them back yet
Click to expand...
Click to collapse
Even when the original system is installed?
I think sensors don't work it's worse than if they're not certified.
rocalino said:
Even when the original system is installed?
I think sensors don't work it's worse than if they're not certified.
Click to expand...
Click to collapse
Even if the original system is installed yeah, but it doesn't seem to be the case for everyone, some people still get the Widevine L1 even after flashing the persist.img
That's what I tought too
Well, I flashed and now phone works Perfect!!
Thank you _Nexus8_
rocalino said:
Well, I flashed and now phone works Perfect!!
Thank you _Nexus8_
Click to expand...
Click to collapse
You're welcome!
_Nexus8_ said:
You're welcome!
Click to expand...
Click to collapse
As you say, Widevine L1 is broken.
I wish in the coming updates could be repaired.
rocalino said:
As you say, Widevine L1 is broken.
I wish in the coming updates could be repaired.
Click to expand...
Click to collapse
As Widevine L1 is a key to unlock advanced features in commercial video streaming it might just not be that simple to restore the protected key when it has been corrupted or deleted. The whole point with it is to protect from use of the advanced video on hardware where the makers do not pay for it.
So, restoring might have to be done at a service point.
Your best bet is to keep in touch with _Nexus8_ here because he is looking very deep into this problem!
_Nexus8_ said:
Yes you can, and you can relock the bootloader using MiFlash as you said It will be completly stock
But I have to warn you that doing that broke my Widevine L1 certification, and I haven't find a way to get them back yet
Click to expand...
Click to collapse
hey i am using redmi 9t and flashed pixel experience after that i decided to go back to stock but after flashing lastest stable miui through miflash i get error "find device storage corrupted your device is unsafe now" i lost my backup as well so if i flash persist.img from fastboot rom will i lose my widewine L1
_Nexus8_ said:
Via ADB?
I had the same problem, I had to unlock back the phone, flash a Chinese TWRP and flash the persist.img as an image into the persist partition
Edit : I'm gonna send the right TWRP for that
Edit 2 : here you go, you can flash the persist partition with this one
Click to expand...
Click to collapse
Hey! Can I use this recovery on Redmi Note 7 Pro as well or not.???
sanket_sy said:
Hey! Can I use this recovery on Redmi Note 7 Pro as well or not.???
Click to expand...
Click to collapse
Obviuously not, different device = different recovery
hi, i flashed the persist.img now sensors are working fine but front camera isn't working(not hardware problem as it is working fine if i control manually).. please help me i am using indian variant of k20 pro..
one more thing i want to know if i flash miui chinese rom using fastboot & again come back to indian rom will that break anything if i flash custom roms after that??
---------- Post added at 08:24 AM ---------- Previous post was at 08:22 AM ----------
_Nexus8_ said:
Hello, it's a common issue, you have to flash the persist.img file that is included in the fastboot ROM
You need to flash it via TWRP because the file is write protected via ADB
Click to expand...
Click to collapse
if you can help regarding this problem!
Related
Currently am on latest may update V10.0.9.0PDIMIFJ, i want to flash V10.0.2.0.PDIMIFJ but confusion about anti-rollback system. will i have any problem?
Bro, you need to delete de update.zip inside the flashing file. If you did this u are good to go without ARB4
*U need to erase this file update.zip on every att file
afranioneto said:
Bro, you need to delete de update.zip inside the flashing file. If you did this u are good to go without ARB4
*U need to erase this file update.zip on every att file
Click to expand...
Click to collapse
Isn't this only for miui?
mariosenta said:
Isn't this only for miui?
Click to expand...
Click to collapse
Oh yes yes. I had been confused, i was talking about MIUI. For Android One i think wasn't have ARB
mrwangdu said:
Currently am on latest may update V10.0.9.0PDIMIFJ, i want to flash V10.0.2.0.PDIMIFJ but confusion about anti-rollback system. will i have any problem?
Click to expand...
Click to collapse
At android one if you have unlocked bootloader arb not working, Google rules. I have downgrade from pie to oreo with no problem at all
vagsvag said:
At android one if you have unlocked bootloader arb not working, Google rules. I have downgrade from pie to oreo with no problem at all
Click to expand...
Click to collapse
so can i flash previous version of pie?
thanks everyone successfully flashed without any problem.
thanks for your information brother. It's now clear about the ARB in MI A2
Central project page
https://forum.xda-developers.com/xperia-xz2/development/recovery-twrp-3-3-1-0-t4074305
11.06.2020
Switch to TWRP 3.4.0
sodp twrp 2020-06 security patch level
stock twrp 2020-05 security patch level for firmware 52.1.A.2.1
Now both twrp should work without a ROM being installed (empty system/vendor/oem partitions) and still be able to decrypt your userdata.
Also the stock twrp touch should now always work instead of playing russian roulette.
Click to expand...
Click to collapse
13.06.2020
Thanks to the fixes in 3.4.0 we got now a TWRP with the following enhancements for STOCK and SODP:
- This TWRP will work with future 10.0 ROMs, you don't need a new build matching the security patch level of your ROM.
- You can install this TWRP again with the buildin ramdisk patcher. Please follow the installation instructions.
Click to expand...
Click to collapse
Please test and report back if you got any touch / decryption problems.
14.06.2020
Reuploaded the stock TWRP with a later touch kernel modules initialization.
Hopefully fixing the randomly happening not working touch.
Click to expand...
Click to collapse
did it work on sov39?
02.03.2021
Reuploaded the SODP TWRP with a workaround for Android 11 compatibility.
Click to expand...
Click to collapse
afandi.s said:
did it work on sov39?
Click to expand...
Click to collapse
Official only international models are unlockable.
MartinX3 said:
Official only international models are unlockable.
Click to expand...
Click to collapse
I have a japanese xz3 and the bl is unlocked
Alex5699 said:
I have a japanese xz3 and the bl is unlocked
Click to expand...
Click to collapse
Does the twrp work?
i never get one to fully work , i have fastboot boot one before to try and install a rom but i get bootloop. im stock rooted and remove bloatware thats it
Alex5699 said:
i never get one to fullow work , i have fastboot boot one before to try and install a rom but i get bootloop. im stock rooted and remove bloatware thats it
Click to expand...
Click to collapse
I made the same experience
Removing system apps -> bootloop
Maybe deactivating vbmeta will fix it.
Maybe in the misc partition is a good bootloop reason or in the ADB logcat.
I never researched it and just deactivated bloat apps.
MartinX3 said:
I made the same experience
Removing system apps -> bootloop
Maybe deactivating vbmeta will fix it.
Maybe in the misc partition is a good bootloop reason or in the ADB logcat.
I never researched it and just deactivated bloat apps.
Click to expand...
Click to collapse
you get bootloop if you use a system app remover app, you will have to use a root explore to remove those apps by deleting the folder or the apk thats inside it
have you tried it?, It work in sov39?, I have sov39 ubl yes like u..
FeLaks said:
have you tried it?, It work in sov39?, I have sov39 ubl yes like u..
Click to expand...
Click to collapse
Mine working on so-01l docomo but cant flash any custom rom because it always report error 1
FeLaks said:
have you tried it?, It work in sov39?, I have sov39 ubl yes like u..
Click to expand...
Click to collapse
How did you unlock your bootloader?
SaqibxNaeem said:
How did you unlock your bootloader?
Click to expand...
Click to collapse
I bought it already got something like that, sorry if it doesn't help
SaqibxNaeem said:
How did you unlock your bootloader?
Click to expand...
Click to collapse
Im using qunlocktool n credits from nugsm
Sir i did unlock my bootloader of sony xz3(sov39) and i have unlock Bl from sony website too
I have global rom install in it (H8416) 52.1.A.3.92
My android version is 10. Now i want to flash twrp but no idea which i have to flash or is there any TWRP which have no errors?
Kindly help
What errors?
MartinX3 said:
What errors?
Click to expand...
Click to collapse
When i flash twrp it says no folder found
Anybody find any solution on this matter? I loaded persist image. I tried every way. I could not return to the L1 certificate. with the latest Android 10 FASTBOOT file. I installed fastboot with MIFLASH. Still l3
Nagodnagod said:
Anybody find any solution on this matter? I loaded persist image. I tried every way. I could not return to the L1 certificate. with the latest Android 10 FASTBOOT file. I installed fastboot with MIFLASH. Still l3
Click to expand...
Click to collapse
Global/EEA firmware : L1
Chinese firmware : L3
Check your firmware version first !
which version i could not understand
Nagodnagod said:
which version i could not understand
Click to expand...
Click to collapse
Ok, i see. You have a global firmware and it looks like the Netflix issue found in the previous android version is still present in Q.
I'm not using android 10 yet. Wait for a fix from MIUI or try a custom rom !
If you want to use Android 10 with Widevine L1 working. I suggest using a custom rom, I am using a crDroid official rom on my Mi 9 Lite. It works perfectly, SafetyNet is passed and I have Widevine L1. As you can see here with Netflix.
If you have not flash to the PERSIST section, there is no problem. If the installation is done, there is no ROM use l1
Did you relocked bootloader again? I think it is mandatory on Global/EEA rom to have L1.
yes i locked again but l3
Nagodnagod said:
yes i locked again but l3
Click to expand...
Click to collapse
Weird.
Success is disgusted by some people, and will not share any files for free in the future.
That's all good but 2 questions
1. How to unlock BL
2. And is it possible to cross china to global and vise versa
ilia1985 said:
That's all good but 2 questions
1. How to unlock BL
2. And is it possible to cross china to global and vise versa
Click to expand...
Click to collapse
I know how to unlock the bootloader, but I am not going to release it.
johnny886 said:
I know how to unlock the bootloader, but I am not going to release it.
Click to expand...
Click to collapse
Ok, it's your choice but what the point of the firmwares? You would rather share something that's is useless to most without BL unlock and keep it to your self. I personally wouldn't mind paying for BL unlock if that is your game here.
ilia1985 said:
Ok, it's your choice but what the point of the firmwares? You would rather share something that's is useless to most without BL unlock and keep it to your self. I personally wouldn't mind paying for BL unlock if that is your game here.
Click to expand...
Click to collapse
https://forum.xda-developers.com/bl...ckshark-3-3-pro-3s-unlock-bootloader-t4141537
thank you
Do you have china joy ui 12 update zip ?
I need global rom ota for update bs3
http://cdn-test-ota.blackshark.com/KLE-A0/20201113095044-klein-ota-signed_by_xiaomi_50fbd88a4e23e10d3f4cbb7e2d11add1.zip
http://cdn-test-ota.blackshark.com/KLE-A0/20201113095044-klein-ota-signed_by_xiaomi_50fbd88a4e23e10d3f4cbb7e2d11add1.zip
hello XDA team
I need help with this Xiaomi Black Shark 3
Model: SHARK KLE-A0
it only stays in Fastboot, I have the bootloader unlocked
any solution to fix my problem please
I try to flash twrp but it always fails, it doesn't go into recovery mode, it only shows fastboot mode
tomelich said:
hello XDA team
I need help with this Xiaomi Black Shark 3
Model: SHARK KLE-A0
it only stays in Fastboot, I have the bootloader unlocked
any solution to fix my problem please
I try to flash twrp but it always fails, it doesn't go into recovery mode, it only shows fastboot mode
Click to expand...
Click to collapse
I recently had this issue and fixed it after a lot of trial and error. Try flashing twrp through a different usb port l. Let me know what error you are getting when you flash recovery in adb cmd. You can pm me.
how to flash this?
aerial4ce said:
I recently had this issue and fixed it after a lot of trial and error. Try flashing twrp through a different usb port l. Let me know what error you are getting when you flash recovery in adb cmd. You can pm me.
Click to expand...
Click to collapse
thank you very much for answering bro
the problem is that it already passed several versions of twrp it shows that it flashed successfully
but it does not enter recovery, it returns to fastboot mode
I searched many sides for firmware for EDL mode and only came across this software, but I can't download it
http : //www. viprom. cn/list/9451. html
unbrick
tomelich said:
hello XDA team
I need help with this Xiaomi Black Shark 3
Model: SHARK KLE-A0
it only stays in Fastboot, I have the bootloader unlocked
any solution to fix my problem please
I try to flash twrp but it always fails, it doesn't go into recovery mode, it only shows fastboot mode
Click to expand...
Click to collapse
Better you flash factory rom. Flash by Qfil application on pc. On me for further information
Can anyone provide
CN-ROM - KLEN2107141CN00MR0
I Can pay thx
is cn ota rom KLEN2105310CN00DRX joyUI 12.5
KLEN2106230CN00MR0.zip
drive.google.com
-https://drive.google.com/file/d/1iWN1TvUEP9AdWL1CxIyK7Oi-bf_lkscg/view?usp=sharing-
here is joyui12.5 MR0 rom
kevin mitnick said:
-https://drive.google.com/file/d/1iWN1TvUEP9AdWL1CxIyK7Oi-bf_lkscg/view?usp=sharing-
here is joyui12.5 MR0 rom
Click to expand...
Click to collapse
Im converted to global. How to flash bro?
Jbazt_katuforzs said:
Im converted to global. How to flash bro?
Click to expand...
Click to collapse
just flash firmware by Qfil application
kevin mitnick said:
-https://drive.google.com/file/d/1iWN1TvUEP9AdWL1CxIyK7Oi-bf_lkscg/view?usp=sharing-
here is joyui12.5 MR0 rom
Click to expand...
Click to collapse
Hey man thx for the share, i tried to flash it with TWRP but is says that the zip is corrupted.
Just wondering if the stock zips can be flashed with twrp?
I tried numerous stock zips and the ROM flashes successfully with no errors, xiaomiflashtool V2 is also successful, however when the phone boots no matter which stock ROM succeeds, Xiaomi.eu is the ROM that boots.
I don't want to use mi-flash, my phone is eea(Vodafone) and I'm trying to flash eea global, when switching with mi flash it activates ARB and bricks the phone. I know it does because I have already done so and got a replacement from Vodafone.
Any help to flash a stock ROM would be appreciated, I'm stuck with xiaomi.eu as it stands.
Cheers.
at moment . there still no recovery rom for Xiaomi Mi 11 . there's people trying to flash stock rom in TWRP but keep failed .
kmzway000 said:
at moment . there still no recovery rom for Xiaomi Mi 11 . there's people trying to flash stock rom in TWRP but keep failed .
Click to expand...
Click to collapse
Mine doesn't fail though, it succeeds. Well shows it succeeds but boots to xiaomi.eu each time.
Xiaomiflashtool V2 also succeeds with the stock ROM , but same outcome is present, xiaomi.eu boots each time.
kmzway000 said:
at moment . there still no recovery rom for Xiaomi Mi 11 . there's people trying to flash stock rom in TWRP but keep failed .
Click to expand...
Click to collapse
MiuiMix is coming soon.
ralovesoc said:
MiuiMix is coming soon.
Click to expand...
Click to collapse
I dont really want any custom roms really, ideally looking to flash stock again but its proving difficult.
hello me i think wait for a stable recovery.
At the moment the "TWRP" that is out is A10 based therefore you can only do normal stuff like wipe, flash magisk etc. It does not support flashing A11 roms yet
Disyraq said:
At the moment the "TWRP" that is out is A10 based therefore you can only do normal stuff like wipe, flash magisk etc. It does not support flashing A11 roms yet
Click to expand...
Click to collapse
you're wrong , lol.
the only reason you can't flash xiaomi.eu is because ingbrzy doesn't want you to
ralovesoc said:
you're wrong , lol.
the only reason you can't flash xiaomi.eu is because ingbrzy doesn't want you to
Click to expand...
Click to collapse
Cant flash any stock too, including xiaomi stable beta
gaztom78 said:
I dont really want any custom roms really, ideally looking to flash stock again but its proving difficult.
Click to expand...
Click to collapse
I just ordered Chinease version I just want to flash stock rom and it gets OTA in the future not bothered about custom
Reading about it
Can I not just flash Xiaomi Mi 11 Latest EEA Stable Version Fastboot with MiFlash and that be it ? or im I missing something ?
Thanks
uscool said:
I just ordered Chinease version I just want to flash stock rom and it gets OTA in the future not bothered about custom
Reading about it
Can I not just flash Xiaomi Mi 11 Latest EEA Stable Version Fastboot with MiFlash and that be it ? or im I missing something ?
Thanks
Click to expand...
Click to collapse
You can flash with mi flash no problem, but since youre changing to a different region rom your bootloader must be unlocked
Disyraq said:
You can flash with mi flash no problem, but since youre changing to a different region rom your bootloader must be unlocked
Click to expand...
Click to collapse
any reason you dont want the bootloader unlocked ? I been told the banking apps still work ? and the phone can be updated by OTA after
Thanks
uscool said:
I just ordered Chinease version I just want to flash stock rom and it gets OTA in the future not bothered about custom
Reading about it
Can I not just flash Xiaomi Mi 11 Latest EEA Stable Version Fastboot with MiFlash and that be it ? or im I missing something ?
Thanks
Click to expand...
Click to collapse
Hi you can, but you need the bl unlocked, also with china phones you might need root for gpay, banking fp etc.... with the bootloader unlocked these things may or not work, however on Chinese phones the bl must remain always open on a custom rom, otherwise the phone will brick.
gaztom78 said:
Hi you can, but you need the bl unlocked, also with china phones you might need root for gpay, banking fp etc.... with the bootloader unlocked these things may or not work, however on Chinese phones the bl must remain always open on a custom rom, otherwise the phone will brick.
Click to expand...
Click to collapse
Reading here Bootloader unlocked doesnt effect banking apps etc ? I plan to flash stock EU rom it wont have root enabled ? Or have I got it wrong ?
Thanks
uscool said:
Reading here Bootloader unlocked doesnt effect banking apps etc ? I plan to flash stock EU rom it wont have root enabled ? Or have I got it wrong ?
Thanks
Click to expand...
Click to collapse
generally thats the case, but for some reason some people its fine and others not, depends on your bank if it detects the bl is unlocked then you cant use it for this without magisk.
gaztom78 said:
generally thats the case, but for some reason some people its fine and others not, depends on your bank if it detects the bl is unlocked then you cant use it for this without magisk.
Click to expand...
Click to collapse
Thanks I guess I'll find out soon enough