Database Develop

[Q] Cant flash I9001JPKG1 PDA&CSC with odin 4.43

hi, i have i9001 s+ and i cant flash stock rom I9001JPKG1 PDA&CSC with odin 4.43, it gets stuck on ext4.img. but when i flash with pda only it accepts and boots ok. but problem when i check *#1234# it says CSC -unknown. pls help i googled and found no answer.....thanks to all.. files are from samfirmware.com

mbba67 said:
hi, i have i9001 s+ and i cant flash stock rom I9001JPKG1 PDA&CSC with odin 4.43, it gets stuck on ext4.img. but when i flash with pda only it accepts and boots ok. but problem when i check *#1234# it says CSC -unknown. pls help i googled and found no answer.....thanks to all.. files are from samfirmware.com
Click to expand...
Click to collapse
ANYONE HAS ANSWERS? Where are the experts and dev?

Anyone know how to download the ODIN Multi_Downloader 4.33 and ops file.
Cannot access to samfirmware.com now

mynewuser said:
Anyone know how to download the ODIN Multi_Downloader 4.33 and ops file.
Cannot access to samfirmware.com now
Click to expand...
Click to collapse
you have to register then only you can download

odin 4.43
http://www.megaupload.com/?d=UQUMXYDG
OPS I9001
http://www.megaupload.com/?d=0V7D2HQG .ops ---> OPS
I9001XXKPG pw sampro.pl
http://hotfile.com/dl/132873531/40c9f94/GT-I9001_XEN_I9001XXKPG_I9001XENKP1_I9001XXKPF.rar.html .md5 ---> One Package
Start!

does this work on my dutch samsung gs plus?????????????

what is the password of this rom??
can't unrar it without a password...

Sh0rty007 said:
what is the password of this rom??
can't unrar it without a password...
Click to expand...
Click to collapse
SamFirmware.com

@mbba67
Try using another USB port. Make sure the Odin drivers are installed properly. Also make sure your internet connection is stable.

mikeeo019 said:
@mbba67
Try using another USB port. Make sure the Odin drivers are installed properly. Also make sure your internet connection is stable.
Click to expand...
Click to collapse
Nop, the CSC file has problems cant flash it.. try and see if u can

hi,Me too facing the same problem can't flash with csc file.tried to flash only csc but same result stuck on ext4 image.tried JPKG1,JPKF7.does any anyone have the one packeg file for arabic I9001.

majeed said:
hi,Me too facing the same problem can't flash with csc file.tried to flash only csc but same result stuck on ext4 image.tried JPKG1,JPKF7.does any anyone have the one packeg file for arabic I9001.
Click to expand...
Click to collapse
It seems that the CSC file is not valid and it's an error from "samfirmware" and you should not flash the CSC file. you can only flash the PDA file. and unfortunately there is no "one package arabic rom" available yet.
the best choice for Iranians is to update to "I9001XXKPS 2.3.6" ROM and modify it to have Farsi language and keyboard... Here you can find the guide in your own language.

use google for i9001 multi csc i9001 jpkf3 .and flashed only csc

[Q] Re-Partition operation failed!!

I am trying to downgrade my sgsa from jb to gb and my mobile is from hongkong
i use the three combo files phone csc and pit files
but whenever i start to flash odin gives me error re-partition operaion failed
and in download mode i see "Custom pit binary!!" in red lines
I have searched a lot but no solution
i have tried many odin versions as well but all were same
i even used heimdall but it didnt flashed too
right now i can just use jellybean i can flash any jb roms stock or custom but cannot downgrade to gb
anyone has the solution for this

ManzzaShahi said:
I am trying to downgrade my sgsa from jb to gb and my mobile is from hongkong
i use the three combo files phone csc and pit files
but whenever i start to flash odin gives me error re-partition operaion failed
and in download mode i see "Custom pit binary!!" in red lines
I have searched a lot but no solution
i have tried many odin versions as well but all were same
i even used heimdall but it didnt flashed too
right now i can just use jellybean i can flash any jb roms stock or custom but cannot downgrade to gb
anyone has the solution for this
Click to expand...
Click to collapse
maybe u chose the wrong pit file... i would advise you to use 1 single md5 file instead of using parts file.

Patlcs said:
maybe u chose the wrong pit file... i would advise you to use 1 single md5 file instead of using parts file.
Click to expand...
Click to collapse
i have tested and downloaded 2 times and same problem
and i am not the only 1 there are other ppl also who are facing this issue
there is no any solution i find until now

Hi dowload this
http:/ /d-h. st/sA3 (delete spaces)
And then flash in odin v3 1.85 only
PIT*: GT-I9070_EUR_XX_8G.pitPDA*: CODE_GT-I9070_I9070DXLD1_CL1068093_REV00_user_SEC_KEY_LD1_ 8G.tar.md5CSC*: CSC_GT-I9070-MULTI-CSC-OLBLD1_SEC_KEY_8G.tar.md5
Congratulations
I recomend that whipe all
Sent from my GT-I9070 using xda premium

Gabboxxx said:
Hi dowload this
http:/ /d-h. st/sA3 (delete spaces)
And then flash in odin v3 1.85 only
PIT*: GT-I9070_EUR_XX_8G.pitPDA*: CODE_GT-I9070_I9070DXLD1_CL1068093_REV00_user_SEC_KEY_LD1_ 8G.tar.md5CSC*: CSC_GT-I9070-MULTI-CSC-OLBLD1_SEC_KEY_8G.tar.md5
Congratulations
I recomend that whipe all
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
i am using those files bro but not working
maybe problem because of a hongkong variant

Broswe in samfirmaware a ROM of honkong
Sent from my GT-I9070 using xda premium

me too only can hongkong rom flash but i want persian language
cannot flash any rom
pit repartition error
jvbmd1 have mor file as other stock md5 file
---------- Post added at 08:55 PM ---------- Previous post was at 08:54 PM ----------
me too only can hongkong rom flash but i want persian language
cannot flash any rom
pit repartition error
hongkong have mor file as other stock md5 file

can you fix re partition error when flash ?
ManzzaShahi said:
i am using those files bro but not working
maybe problem because of a hongkong variant
Click to expand...
Click to collapse
hello
can you fix your phone ?
re partition error when flash ?
only hon Kong ROM worked and flashed for me

zakaria9 said:
hello
can you fix your phone ?
re partition error when flash ?
only hon Kong ROM worked and flashed for me
Click to expand...
Click to collapse
ya can be fixed bro :laugh::laugh::laugh:
you first root and install root explorer then copy "tee" folder to your sdcard
now download firmware of other region and flash it any jellybean
then root again and replace the "tee" folder with the one you saved before
if you want to downgrade to gb download files and just flash pda file and after success boot and then flash hongkong region firmware

[need help] galaxy note brick,custom binary count

hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:

mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...

mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app

NoteboyTech said:
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i have try GB firmware that contains all files the result still same.. i don't know what to do

hazwan708 said:
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
Click to expand...
Click to collapse
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:

mohd syafik said:
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
Click to expand...
Click to collapse
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.

ThaiDai said:
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
Click to expand...
Click to collapse
still same.. i flash pit file from hg42 thread stuck on set partition..
here i attaches the image

How will it move ahead? You have not selected any PDA files to flash.
And why did you flash that PIT file? Have you done any scans using the scanners found in that thread to determine the bad blocks?

ENter all the 3 files without PIT! and tell again!

Nand Erase In ODIN ( *** SOLVED *** )

Guys,
I need an urgent help. Here is my Story..
Using 9208 Note 5 model. After trying different custom roms i tried to flash stock firmware using Odin. Did everything correctly. Unfortunately i checked Nand Erase all option too. The result is my Note 5 stuck at Samsung DimDim logo. For almost 1 hour. Tried reflash several times but no luck..
So i flashed twrp and wipe data and factory reset and reboot. Its works. But problem with voLTE. No voLTE working. I know flashing JIO voLTE fix will solve this but i need a solution for this Odin. I dont want to flash voLTE fix.
Can someone help me pls.. How to bypass that Samsung logo without flashing Twrp.. ?

Rajeev said:
Guys,
I need an urgent help. Here is my Story..
Using 9208 Note 5 model. After trying different custom roms i tried to flash stock firmware using Odin. Did everything correctly. Unfortunately i checked Nand Erase all option too. The result is my Note 5 stuck at Samsung DimDim logo. For almost 1 hour. Tried reflash several times but no luck..
So i flashed twrp and wipe data and factory reset and reboot. Its works. But problem with voLTE. No voLTE working. I know flashing JIO voLTE fix will solve this but i need a solution for this Odin. I dont want to flash voLTE fix.
Can someone help me pls.. How to bypass that Samsung logo without flashing Twrp.. ?
Click to expand...
Click to collapse
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.

MrMike2182 said:
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
Click to expand...
Click to collapse
Thanks bro. I found mine. So there is option to choose PIT in Odin ?
@MrMike2182
Thanks alot for saving me. Now everything works perfect. Thanks again..

Rajeev said:
Thanks bro. I found mine. So there is option to choose PIT in Odin ?
@MrMike2182
Thanks alot for saving me. Now everything works perfect. Thanks again..
Click to expand...
Click to collapse
It should be in the options tab.

MrMike2182 said:
It should be in the options tab.
Click to expand...
Click to collapse
Yea i fixed it bro. Thanks bro

How did you get your partitions back?

dallen5 said:
How did you get your partitions back?
Click to expand...
Click to collapse
That's what the PIT file does.

dallen5 said:
How did you get your partitions back?
Click to expand...
Click to collapse
Download PIT file for ur exact model number from Samsung website and flash it via ODI with Firmware.

MrMike2182 said:
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
Click to expand...
Click to collapse
My S7 edge stuck in bootloop sometimes No Command and Fail to open recovery_cause (No such file or directory) after Android 8.0 update, i do the every solution provided on the internet but its not done. After watch your thread i understand what is happening with my phone and i want to do the Nand Erase & Re-Partition for the same.
please help me to find the .pit file for erase nand and re partition.
Your support will save my phone.
Millions of thanks.

Amolxp said:
My S7 edge stuck in bootloop sometimes No Command and Fail to open recovery_cause (No such file or directory) after Android 8.0 update, i do the every solution provided on the internet but its not done. After watch your thread i understand what is happening with my phone and i want to do the Nand Erase & Re-Partition for the same.
please help me to find the .pit file for erase nand and re partition.
Your support will save my phone.
Millions of thanks.
Click to expand...
Click to collapse
I need to know the firmware version that you were on before this problem started.. The PIT file is always inside of the firmware you download all you need to is unzip it from within the .zip..

MrMike2182 said:
I need to know the firmware version that you were on before this problem started.. The PIT file is always inside of the firmware you download all you need to is unzip it from within the .zip..
Click to expand...
Click to collapse
Thanks for your kind response, after update of the firmware current version is G935FXXS4ESC6 and before update G935FXXS3ERJ2 and i forgot the previous version of Android 7.0. Can downgrade of Android version will fix the same, if yes please let me know how to downgrade the android version.
Thanks you so much

Amolxp said:
Thanks for your kind response, after update of the firmware current version is G935FXXS4ESC6 and before update G935FXXS3ERJ2 and i forgot the previous version of Android 7.0. Can downgrade of Android version will fix the same, if yes please let me know how to downgrade the android version.
Thanks you so much
Click to expand...
Click to collapse
You can only downgrade if you have firmware that's bootloader version 4 because you're currently on bootloader version 4 and you cannot go back down to bootloader version 3 or earlier because that's been blocked by Sammy.. If you need the PIT file it's inside of the firmware that you downloaded you just need to extract it from the file. If you have the firmware G935FXXS4ESC6 then unzip it and then unzip them again and you'll find the PIT file in there.. It's usually inside of the CSC .tar file.

MrMike2182 said:
You can only downgrade if you have firmware that's bootloader version 4 because you're currently on bootloader version 4 and you cannot go back down to bootloader version 3 or earlier because that's been blocked by Sammy.. If you need the PIT file it's inside of the firmware that you downloaded you just need to extract it from the file. If you have the firmware G935FXXS4ESC6 then unzip it and then unzip them again and you'll find the PIT file in there.. It's usually inside of the CSC .tar file.
Click to expand...
Click to collapse
Thanks for your kind support, as per your suggestion after unzip the csc file i found the pit file . Now should i select Nand Erase & Re-Partition options after inserting the pit file. Is it safe to select these options?
I have flash so many time with same firmware, flashing was ok but still i'm facing same problem.
Millions of Thanks

Amolxp said:
Thanks for your kind support, as per your suggestion after unzip the csc file i found the pit file . Now should i select Nand Erase & Re-Partition options after inserting the pit file. Is it safe to select these options?
I have flash so many time with same firmware, flashing was ok but still i'm facing same problem.
Millions of Thanks
Click to expand...
Click to collapse
You can do that yes and if that doesn't fix your problem then there must be something wrong with the phone itself. For your information though you're asking for help in the Galaxy Note 5 thread but you're on a Galaxy S7 Edge.. I do think a moderator might end up moving this to the correct place.

Samsung Galaxy Note 5 - Stock firmware, Odin failing and more.. (Help NEEDED!!!)

Hi, I would like to ask someone to please help me to fix my note 5... I can't flash the stock firmware in Odin because everytime I try to, it stops and fails at "hidden.img"

[email protected] said:
Hi, I would like to ask someone to please help me to fix my note 5... I can't flash the stock firmware in Odin because everytime I try to, it stops and fails at "hidden.img"
Click to expand...
Click to collapse
Flash using pit file with repartition ticked or remove hidden.img from firmware and will be fine