Database Develop

Cyanogenmod to Stock

Guys
I installed CM 7 successfully on my SGS using instructions here
http://www.galaxyroot.com/rom-cyanogenmod-7-for-galaxy-s-non-official/
It installed perfectly but i m not having signal. So i flashed back original JPY using ODin but phone is stuck on galaxy logo. Please advice on how to revert to original ROM?
Thanks

did you use PIT and check REPARTITION when you flashed back to JPY ??

azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
No as i have one file only JPY_JPY_JPY.tar

azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
As per Odin tutorial i select Pit and repartition only when i have 3 files. Can you please advice where can i get 3 files as i have one file only from samfirmware?
My I9000 is international and factory unlocked....

right well were gunna need a 3 file firmware in order to use PIT. bear with me whilst i have a look for one.

probably samfirmare.com ?

yeah just been looking on there they all seem to be 1 file

Yes samfirmware.com has 1 files only.
Are you sure if i flash with 3 files and select repartition then it will solve my problem?

install another firmware like jpjpa with 3 files and then flash xxjpy on it

Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?

Will kies be of any help if i put phone in download mode and attach it with kies?

well im looking at a site that says do re partition with 1 file but its not recommended. http://androidadvices.com/update-samsung-galaxy-s-gt-i9000-to-froyo-xxjpy-2-2-1/
re partition should fix the problem,

zeeshee said:
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Click to expand...
Click to collapse
WOOHOO !!!! you found it lol been searching for that with no luck. if XDA says it will work.... it will work lol i have faith in XDA

How to get three files as it is only 1 exe file?

exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??

azzledazzle said:
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
Click to expand...
Click to collapse
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????

zeeshee said:
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
Click to expand...
Click to collapse
i dont know try renaming it. im downloading it myself now so i can see whats going on

ok its self ecxtrating file..
it gave me following 2 files only
CODE_I9000XXJPU.tar.md5
MODEM_I9000XXJPU.tar.md5
Are these phone and CSC for oDin? What about PDA?

http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit

azzledazzle said:
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
Click to expand...
Click to collapse
Thanks. Odin is updating now.. Hope it works once done.

Another XWJS5 (new) in Samfirmware

Does anybody know the difference between the two XWJS5 firmwares?

Difference...
Yes. The previous one is for Heimdall and the new one is for Odin.
As I saw.

I have heard that the new one contains a bootloader update.
I don't know if its true tho.
/qsec

temilla said:
Does anybody know the difference between the two XWJS5 firmwares?
Click to expand...
Click to collapse
Previous JS5 was an update flash (1 file), this one is a FULL Rom (3 file, 242mb). The same difference between JS3 and XEN JS3.
Anyway it shouldn't be 803 .pit. To recover from experimental partitioning I use JS3-full (which is tagged as 803) with 512.pit since 803 doesn't work for me.

matticala said:
Anyway it shouldn't be 803 .pit. To recover from experimental partitioning I use JS3-full (which is tagged as 803) with 512.pit since 803 doesn't work for me.
Click to expand...
Click to collapse
Thanks for that ! I'm trying to install these JS5 since yesterday with .pit 803 without success : mount problem at reboot after odin success, formating in recovery doesn't work and updating couldn't been done by new rom (vibrate loop reboot).
Changing to 512 .pit seems to solve this problem : my phone just restarts on JS5 now !

matticala said:
Anyway it shouldn't be 803 .pit. To recover from experimental partitioning I use JS3-full (which is tagged as 803) with 512.pit since 803 doesn't work for me.
Click to expand...
Click to collapse
OT- that's interesting as I flashed js3 with 803 unsuccessfully but it works with 512.
Sent from my GT-I9000 using XDA App

Content of I9000 XEN I9000XWJS5.rar:
Code:
GT-I9000-CSC-XENJS3.tar.md5
I9000XWJS5-REV03-ALL-low-CL869633.tar.md5
MODEM_I9000XXJPY.tar.md5
Confirmed there are a bootloader and a Sbl file, even though those are likely the same of those included in the previous XEN JS3. I'll make a checksum to verify
UPDATE: there is no update in this new XEN JS5, md5sum for boot.bin is identical to the one bundled within XEN JS3

MarkyG82 said:
OT- that's interesting as I flashed js3 with 803 unsuccessfully but it works with 512.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
guys please let me understand.... so why you are speaking about .512 and .803 .pit?
Using odin with last rom js5 from samsungfirmware I have to select just one file in pda tab, whitout .pit file.
what's wrong in my flashing way?

Be careful on updating. Double check the bootloader and Sbl.bin. We don't want the sgs to be locked, like the galaxy tab.
Sent from my GT-I9000 using XDA App

userinit said:
guys please let me understand.... so why you are speaking about .512 and .803 .pit?
Using odin with last rom js5 from samsungfirmware I have to select just one file in pda tab, whitout .pit file.
what's wrong in my flashing way?
Click to expand...
Click to collapse
.pit file is used to flash the full rom (phone + modem + csc) with re-partition flagged, basically the pit file tells odin where to write the filesystems.
Whenever you have just one file (phone), you don't need either pit or re-partition flag. This last XEN JS5 is a FULL rom.
g00ndu said:
Be careful on updating. Double check the bootloader and Sbl.bin. We don't want the sgs to be locked, like the galaxy tab.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
doublechecked boot.bin (where identical), not sbl.bin though

g00ndu said:
Be careful on updating. Double check the bootloader and Sbl.bin. We don't want the sgs to be locked, like the galaxy tab.
Click to expand...
Click to collapse
You're right !
I still have my DL mode after flashing these files ...

Wendigogo said:
You're right !
I still have my DL mode after flashing these files ...
Click to expand...
Click to collapse
Was Auto Reboot selected? Does Odin show a green success after completition?
Official thread

matticala said:
Was Auto Reboot selected? Does Odin show a green success after completition?
Click to expand...
Click to collapse
Yes for the two questions !

Wendigogo said:
You're right !
I still have my DL mode after flashing these files ...
Click to expand...
Click to collapse
Just for clarify it, Samsung's 'locked' bootloader on Galaxy Tab is not the problem about download mode... The signed bootloader also allow flashing the device later... The problem is just about the files what you can use... With Samsung's signed bootloader you can flash in the future just also signed kernels, you basically you willl not able to flash custom ROM-s in the future... You can flash firmwares with Odin, you can flash Samsung beta firmwares also, just simply could not flash custom ROM-s... This could be big problem or verly small also based on your usage habit. While I use 2.2.1 I simply not use custom ROM-s, but of course before I used... Nowadays 'signed' situations could not break my life with i9000, but with Galaxy Tab it could ... at least in the near future, as it's ROM not as good as the current i9000 versions...
Hi,

eboIa said:
Just for clarify it, Samsung's 'locked' bootloader on Galaxy Tab is not the problem about download mode... The signed bootloader also allow flashing the device later... The problem is just about the files what you can use... With Samsung's signed bootloader you can flash in the future just also signed kernels, you basically you willl not able to flash custom ROM-s in the future... You can flash firmwares with Odin, you can flash Samsung beta firmwares also, just simply could not flash custom ROM-s...
Click to expand...
Click to collapse
Thanks for explaining this ! But I couldn't understand why you couldn't donwgrade to a non-locked bootloader with Odin ? Don't have access to it ? But without access to it it couldn't be modified with latest Samsung FW via Odin ?

Hi
Still not patched to fixed.

for me it is interesting too why it is so messy about downgrade, could someone just wipe bootloader and force flash older back?

when i flash this i cant get the swedish keyboard in my phone
any ideas on this ist this the european ver i reverted back to I9000XWJM5 i kies tells me there is no update

Sorry one is not hiedemell both are odin one is full 3 file package which requires 803 pit file and other is single pda file flashable without pit or repartition from any previous stock rom
Sent from my GT-I9000 using XDA App

[Q] Cant flash I9001JPKG1 PDA&CSC with odin 4.43

hi, i have i9001 s+ and i cant flash stock rom I9001JPKG1 PDA&CSC with odin 4.43, it gets stuck on ext4.img. but when i flash with pda only it accepts and boots ok. but problem when i check *#1234# it says CSC -unknown. pls help i googled and found no answer.....thanks to all.. files are from samfirmware.com

mbba67 said:
hi, i have i9001 s+ and i cant flash stock rom I9001JPKG1 PDA&CSC with odin 4.43, it gets stuck on ext4.img. but when i flash with pda only it accepts and boots ok. but problem when i check *#1234# it says CSC -unknown. pls help i googled and found no answer.....thanks to all.. files are from samfirmware.com
Click to expand...
Click to collapse
ANYONE HAS ANSWERS? Where are the experts and dev?

Anyone know how to download the ODIN Multi_Downloader 4.33 and ops file.
Cannot access to samfirmware.com now

mynewuser said:
Anyone know how to download the ODIN Multi_Downloader 4.33 and ops file.
Cannot access to samfirmware.com now
Click to expand...
Click to collapse
you have to register then only you can download

odin 4.43
http://www.megaupload.com/?d=UQUMXYDG
OPS I9001
http://www.megaupload.com/?d=0V7D2HQG .ops ---> OPS
I9001XXKPG pw sampro.pl
http://hotfile.com/dl/132873531/40c9f94/GT-I9001_XEN_I9001XXKPG_I9001XENKP1_I9001XXKPF.rar.html .md5 ---> One Package
Start!

does this work on my dutch samsung gs plus?????????????

what is the password of this rom??
can't unrar it without a password...

Sh0rty007 said:
what is the password of this rom??
can't unrar it without a password...
Click to expand...
Click to collapse
SamFirmware.com

@mbba67
Try using another USB port. Make sure the Odin drivers are installed properly. Also make sure your internet connection is stable.

mikeeo019 said:
@mbba67
Try using another USB port. Make sure the Odin drivers are installed properly. Also make sure your internet connection is stable.
Click to expand...
Click to collapse
Nop, the CSC file has problems cant flash it.. try and see if u can

hi,Me too facing the same problem can't flash with csc file.tried to flash only csc but same result stuck on ext4 image.tried JPKG1,JPKF7.does any anyone have the one packeg file for arabic I9001.

majeed said:
hi,Me too facing the same problem can't flash with csc file.tried to flash only csc but same result stuck on ext4 image.tried JPKG1,JPKF7.does any anyone have the one packeg file for arabic I9001.
Click to expand...
Click to collapse
It seems that the CSC file is not valid and it's an error from "samfirmware" and you should not flash the CSC file. you can only flash the PDA file. and unfortunately there is no "one package arabic rom" available yet.
the best choice for Iranians is to update to "I9001XXKPS 2.3.6" ROM and modify it to have Farsi language and keyboard... Here you can find the guide in your own language.

use google for i9001 multi csc i9001 jpkf3 .and flashed only csc

Cant flash S5830i with Odin

Hi please help me to flash S5830i with Odin 1.85.
I get error on the start,i try to flash this firmware:
S5830iZCLA4_S5830iCHNLA4_S5830iZCLA4_HOME.tar.md5
tnx br Roni

It's a one package file
Please use the normal ODIN to flash that
Herpderp Defy.

EmoBoiix3 said:
Please use the normal ODIN to flash that
.
Click to expand...
Click to collapse
What version you mean normal Odin

Odin
This Version (It´s Atached)

SnowPluralism said:
This Version (It´s Atached)
Click to expand...
Click to collapse
Tnx but this odin not working on S5830i

Roni1976 said:
Tnx but this odin not working on S5830i
Click to expand...
Click to collapse
Have you tried ?
Herpderp Defy.

EmoBoiix3 said:
Have you tried ?
Herpderp Defy.
Click to expand...
Click to collapse
Of course I tried to flash,I'm not a baby, seriously I can flash them.
I found four files firmware:
1.BOOT_S5830iXXKK5_REV00.tar.md5
2.GT-S5830i-MULTI-CSC-OXEKK4_RST.tar.md5
3.MODEM_S5830iXXKK5_REV00.tar.md5
4.PDA_S5830iXXKL1_REV00.tar.md5
And it`s working perfect with odin 1.85,but one image of md5 file not flashing.
who have Chinese with four files or backup

Roni1976 said:
Of course I tried to flash,I'm not a baby, seriously I can flash them.
I found four files firmware:
1.BOOT_S5830iXXKK5_REV00.tar.md5
2.GT-S5830i-MULTI-CSC-OXEKK4_RST.tar.md5
3.MODEM_S5830iXXKK5_REV00.tar.md5
4.PDA_S5830iXXKL1_REV00.tar.md5
And it`s working perfect with odin 1.85,but one image of md5 file not flashing.
who have Chinese with four files or backup
Click to expand...
Click to collapse
Boot to bootloader
Csc to csc
Modem to phone
Pda to pda
Herpderp Defy.

EmoBoiix3 said:
Boot to bootloader
Csc to csc
Modem to phone
Pda to pda
Herpderp Defy.
Click to expand...
Click to collapse
You are funny
Read my post carefully

One of those file might be corrupted. Try other firmware first, if it succeed then it might be corrupted
Sent from my GT-S5830 using Tapatalk

Even i m getting the same problem.. I used Odin 1.7 It Loaded up to System.img..50%... and then suddenly failed.. I dont know what happend...
Samsung guys slowly screwing the box.. :-(

Odin for GT-S5830 no need a *.pit but an *.ops file. Not sure about GT-S5830i.

So another thread about s5830i...You need Odin 1.85 and a version of Firmware for YOUR country...or just find PDA.tar in google and flash it

Roni1976 said:
Of course I tried to flash,I'm not a baby, seriously I can flash them.
I found four files firmware:
1.BOOT_S5830iXXKK5_REV00.tar.md5
2.GT-S5830i-MULTI-CSC-OXEKK4_RST.tar.md5
3.MODEM_S5830iXXKK5_REV00.tar.md5
4.PDA_S5830iXXKL1_REV00.tar.md5
And it`s working perfect with odin 1.85,but one image of md5 file not flashing.
who have Chinese with four files or backup
Click to expand...
Click to collapse
i got a rom in chinese and can work with odin 1.85
i cant post link here, It's stock rom for HongKong S5830iZSLA3
kindly reach me via email [email protected]

Use odin 1.85. the official s5830i odin may not even detect the phone in download mode. open odin 1.85
select pda
modem and csc and ignore boot
phone will flash ok. use jig to enter download mode if combination not work.

gsmxpert said:
Use odin 1.85. the official s5830i odin may not even detect the phone in download mode. open odin 1.85
select pda
modem and csc and ignore boot
phone will flash ok. use jig to enter download mode if combination not work.
Click to expand...
Click to collapse
wonder if this works on non original firmware of that particular phone?

have you solve your problem sir im still facing this problem can you share the link that you use and the chinese file ineed to sir.. tia

I think u should try Odin 1.84 with pit file

yes sir i have try with pit file but same.. i need to change it to chines language sir... hope can anyone help me...

the problem with this phone is that odin can't flash it with onepackage file
you have to split the rom to 3 files flashabl with odin
follow this for the procedure
i use it with many roms with succeed
http://forum.xda-developers.com/showthread.php?t=1611225&page=19

Restore Galaxy S I9000 as stock.

Hello everyone,yesterday i got my new galaxy S i9000 and i did install latest CM9.
I was wondering,how do i get back the STOCK firmware with its original kernel(obiviously locked bootloader) and without root? Thanks to everyone who will help me!

Hi there,
you just have to install the galaxy S divers on your computer and use odin to reinstall the stock ROM. Go on samfirmware to choose the Stock ROM you prefer...
I can't find the official thread here on XDA, but you should be alright with samfirmware (look it up on google).
(tick repartition!!!)

Wolf80 said:
Hello everyone,yesterday i got my new galaxy S i9000 and i did install latest CM9.
I was wondering,how do i get back the STOCK firmware with its original kernel(obiviously locked bootloader) and without root? Thanks to everyone who will help me!
Click to expand...
Click to collapse
you need to download 3 file odin from here http://hotfile.com/dl/146501544/03b0f87/I9000XXJVU_I9000OXAJVU_OXA.zip.html
and flash via odin
and post in q&a forum

Will flashing a Stock ROM lock the bootloader again?

512 pit file n reparation tick... right?
Sent from my GT-I9000

Wolf80 said:
Hello everyone,yesterday i got my new galaxy S i9000 and i did install latest CM9.
I was wondering,how do i get back the STOCK firmware with its original kernel(obiviously locked bootloader) and without root? Thanks to everyone who will help me!
Click to expand...
Click to collapse
just wanted to know that which method you used to root your phone and switched to cm9..?

When you are flashing a 3-file ROM (with PIT, yes, 512), TICK Re-Partition, when you are flashing a 1-file ROM (e.g. from samfirmware) do NOT tick Re-Partition

Ajoslaf said:
When you are flashing a 3-file ROM (with PIT, yes, 512), TICK Re-Partition, when you are flashing a 1-file ROM (e.g. from samfirmware) do NOT tick Re-Partition
Click to expand...
Click to collapse
Thank you very much bro... and what about boot loader ?? Tick or untick..??. sorry for noob questions
Sent from my GT-I9000 using xda premium

u.bindal said:
just wanted to know that which method you used to root your phone and switched to cm9..?
Click to expand...
Click to collapse
I flashed Semaphore 2.5.0 kernel with Odin,then i downloaded CM7,installed,configured,and installed CM9

Downloaded now the firmware from samfirmware! I have to tick repartion or not?? And,where should i insert the zip in odin??

I am using Android 2.3.3 on my Galaxy S i9000.... can i root it using 'Super-one-click'.....??

Guys,got a little problem...i flashed the STOCK firmware,but all i get is bootloop! I flashed latest version (2.3.6)

Will you root best cf-root kernel version of your firmware .. otherwise superoneclick must be on the GB.
---------- Post added at 07:37 PM ---------- Previous post was at 07:36 PM ----------
Wolf80 said:
Guys,got a little problem...i flashed the STOCK firmware,but all i get is bootloop! I flashed latest version (2.3.6)
Click to expand...
Click to collapse
It fw.pro samsung galaxy, you have a signature in a different model?

Now that i remember,before installing CM9,I had Gingerbread 2.3.6 and when the phone was booting up i had vodafone logo..

Wolf80 said:
Now that i remember,before installing CM9,I had Gingerbread 2.3.6 and when the phone was booting up i had vodafone logo..
Click to expand...
Click to collapse
After this, I recommend flash stock 3 fw.s pit.512 file and re-partition.

Flashing with 3 files now,i'll let you know!

misacek said:
After this, I recommend flash stock 3 fw.s pit.512 file and re-partition.
Click to expand...
Click to collapse
Maybe XXJVP 2.3.4, pda, modem, csc, and re-pit512 partition.Je version of it that helped me ..

Wolf80 said:
Flashing with 3 files now,i'll let you know!
Click to expand...
Click to collapse
3-files (PDA, Phone, CSC) & re-partition (w/ 512.pit) is mandatory when coming from CM7/9/10, since those are using different flash layout (MTD vs. BML). So just grab some stock rom (JW4 for example) and flash it.
Only tick re-partition (leave other settings as they were) (SGS bootloaders aint locked so no need to worry about those..)
You should be fine with these instructions..I have flashed my phone several times like this (back from CM9 etc..)
Edit: btw, this topic should be in Q&A..

Why is everyone is replying ?Wrong section ..This is not a Q/A Section ..Please don't reply

Before i also mention that you posted in the wrong section:
You need to flash a PIT file and not only tick repartition, how should the partition layout gets changed if you don't choose one to change to??
Now that you know it:
WRONG SECTION!