Does anybody know the difference between the two XWJS5 firmwares?
Difference...
Yes. The previous one is for Heimdall and the new one is for Odin.
As I saw.
I have heard that the new one contains a bootloader update.
I don't know if its true tho.
/qsec
temilla said:
Does anybody know the difference between the two XWJS5 firmwares?
Click to expand...
Click to collapse
Previous JS5 was an update flash (1 file), this one is a FULL Rom (3 file, 242mb). The same difference between JS3 and XEN JS3.
Anyway it shouldn't be 803 .pit. To recover from experimental partitioning I use JS3-full (which is tagged as 803) with 512.pit since 803 doesn't work for me.
matticala said:
Anyway it shouldn't be 803 .pit. To recover from experimental partitioning I use JS3-full (which is tagged as 803) with 512.pit since 803 doesn't work for me.
Click to expand...
Click to collapse
Thanks for that ! I'm trying to install these JS5 since yesterday with .pit 803 without success : mount problem at reboot after odin success, formating in recovery doesn't work and updating couldn't been done by new rom (vibrate loop reboot).
Changing to 512 .pit seems to solve this problem : my phone just restarts on JS5 now !
matticala said:
Anyway it shouldn't be 803 .pit. To recover from experimental partitioning I use JS3-full (which is tagged as 803) with 512.pit since 803 doesn't work for me.
Click to expand...
Click to collapse
OT- that's interesting as I flashed js3 with 803 unsuccessfully but it works with 512.
Sent from my GT-I9000 using XDA App
Content of I9000 XEN I9000XWJS5.rar:
Code:
GT-I9000-CSC-XENJS3.tar.md5
I9000XWJS5-REV03-ALL-low-CL869633.tar.md5
MODEM_I9000XXJPY.tar.md5
Confirmed there are a bootloader and a Sbl file, even though those are likely the same of those included in the previous XEN JS3. I'll make a checksum to verify
UPDATE: there is no update in this new XEN JS5, md5sum for boot.bin is identical to the one bundled within XEN JS3
MarkyG82 said:
OT- that's interesting as I flashed js3 with 803 unsuccessfully but it works with 512.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
guys please let me understand.... so why you are speaking about .512 and .803 .pit?
Using odin with last rom js5 from samsungfirmware I have to select just one file in pda tab, whitout .pit file.
what's wrong in my flashing way?
Be careful on updating. Double check the bootloader and Sbl.bin. We don't want the sgs to be locked, like the galaxy tab.
Sent from my GT-I9000 using XDA App
userinit said:
guys please let me understand.... so why you are speaking about .512 and .803 .pit?
Using odin with last rom js5 from samsungfirmware I have to select just one file in pda tab, whitout .pit file.
what's wrong in my flashing way?
Click to expand...
Click to collapse
.pit file is used to flash the full rom (phone + modem + csc) with re-partition flagged, basically the pit file tells odin where to write the filesystems.
Whenever you have just one file (phone), you don't need either pit or re-partition flag. This last XEN JS5 is a FULL rom.
g00ndu said:
Be careful on updating. Double check the bootloader and Sbl.bin. We don't want the sgs to be locked, like the galaxy tab.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
doublechecked boot.bin (where identical), not sbl.bin though
g00ndu said:
Be careful on updating. Double check the bootloader and Sbl.bin. We don't want the sgs to be locked, like the galaxy tab.
Click to expand...
Click to collapse
You're right !
I still have my DL mode after flashing these files ...
Wendigogo said:
You're right !
I still have my DL mode after flashing these files ...
Click to expand...
Click to collapse
Was Auto Reboot selected? Does Odin show a green success after completition?
Official thread
matticala said:
Was Auto Reboot selected? Does Odin show a green success after completition?
Click to expand...
Click to collapse
Yes for the two questions !
Wendigogo said:
You're right !
I still have my DL mode after flashing these files ...
Click to expand...
Click to collapse
Just for clarify it, Samsung's 'locked' bootloader on Galaxy Tab is not the problem about download mode... The signed bootloader also allow flashing the device later... The problem is just about the files what you can use... With Samsung's signed bootloader you can flash in the future just also signed kernels, you basically you willl not able to flash custom ROM-s in the future... You can flash firmwares with Odin, you can flash Samsung beta firmwares also, just simply could not flash custom ROM-s... This could be big problem or verly small also based on your usage habit. While I use 2.2.1 I simply not use custom ROM-s, but of course before I used... Nowadays 'signed' situations could not break my life with i9000, but with Galaxy Tab it could ... at least in the near future, as it's ROM not as good as the current i9000 versions...
Hi,
eboIa said:
Just for clarify it, Samsung's 'locked' bootloader on Galaxy Tab is not the problem about download mode... The signed bootloader also allow flashing the device later... The problem is just about the files what you can use... With Samsung's signed bootloader you can flash in the future just also signed kernels, you basically you willl not able to flash custom ROM-s in the future... You can flash firmwares with Odin, you can flash Samsung beta firmwares also, just simply could not flash custom ROM-s...
Click to expand...
Click to collapse
Thanks for explaining this ! But I couldn't understand why you couldn't donwgrade to a non-locked bootloader with Odin ? Don't have access to it ? But without access to it it couldn't be modified with latest Samsung FW via Odin ?
Hi
Still not patched to fixed.
for me it is interesting too why it is so messy about downgrade, could someone just wipe bootloader and force flash older back?
when i flash this i cant get the swedish keyboard in my phone
any ideas on this ist this the european ver i reverted back to I9000XWJM5 i kies tells me there is no update
Sorry one is not hiedemell both are odin one is full 3 file package which requires 803 pit file and other is single pda file flashable without pit or repartition from any previous stock rom
Sent from my GT-I9000 using XDA App
Related
Seems there are some asking in the XXJM6 thread but usually it gets buried with posts specifically for flashing the FW.
I tried downgrading using different PIT files and FWs but it would fail via ODIN.
Is there a way to downgrade XXJM6 and how?
Thanks.
Sent from my GT-P1000 using Tapatalk
Are you on the first or second versions of JM6?
2nd version but came from the 1st XXJM6 leak
Sent from my GT-P1000 using Tapatalk
try flashing LHA with repartition on and then another firmware..
xIllu said:
try flashing LHA with repartition on and then another firmware..
Click to expand...
Click to collapse
I think he meant JHA, and i agree.
Try to flash JHA with its PIT file and repartition and to upgrade to JJ4 from that.
Let us know if that worked.
xIllu said:
try flashing LHA with repartition on and then another firmware..
Click to expand...
Click to collapse
JHA you mean? Yup tried that with 816 PIT but it will immediately fail.
Sent from my GT-P1000 using Tapatalk
clubtech said:
I think he meant JHA, and i agree.
Try to flash JHA with its PIT file and repartition and to upgrade to JJ4 from that.
Let us know if that worked.
Click to expand...
Click to collapse
Never tried JJ4, will give it a try then post the result.
EDIT: tried JJ4 - FAIL. Same goes with almost all the fw posted in samfirmware website. So i guess to those who flashed to JM6, we are stuck!! Good thing JM6 is a good fw. Still hoping a workaround though.
Sent from my GT-P1000 using Tapatalk
have you tried the following?
1) Factory reset via HOME + VOL UP + POWER
2) Flash PIT only first (use the P1 from SAMFIRMWARE)
3) Flash JJ4 (make sure have dbdata file inside)
bdigitalstudio said:
have you tried the following?
1) Factory reset via HOME + VOL UP + POWER
2) Flash PIT only first (use the P1 from SAMFIRMWARE)
3) Flash JJ4 (make sure have dbdata file inside)
Click to expand...
Click to collapse
I have tried this too, still would fail. Anyone who successfully downgraded from JM6?
What do you mean, make sure you have dbdata file inside?
Sent from my GT-P1000 using Tapatalk
antz88c said:
I have tried this too, still would fail. Anyone who successfully downgraded from JM6?
What do you mean, make sure you have dbdata file inside?
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Open the TAR file using WINRAR or something and see for a file called DBDATA. This file is a must after PIT programming.
bdigitalstudio said:
Open the TAR file using WINRAR or something and see for a file called DBDATA. This file is a must after PIT programming.
Click to expand...
Click to collapse
Meaning after flashing PIT, flash dbdata then JJ4?
Sent from my GT-P1000 using Tapatalk
antz88c said:
Meaning after flashing PIT, flash dbdata then JJ4?
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
open the JJ4.TAR with WinRAR and you should see the DBDATA file inside. if it is not, find the firmware which has it..
bdigitalstudio said:
open the JJ4.TAR with WinRAR and you should see the DBDATA file inside. if it is not, find the firmware which has it..
Click to expand...
Click to collapse
Thanks but didn't work.
Sent from my GT-P1000 using Tapatalk
Well i was able to downgrade from JM6 to ANY firmware, but i never used the 2nd version of JM6 nor the full flash of JJ4, i was only flashing the pda part so far.
Note that my firmware was BUJI4 when i got the tablet.
sedde said:
Well i was able to downgrade from JM6 to ANY firmware, but i never used the 2nd version of JM6 nor the full flash of JJ4, i was only flashing the pda part so far.
Note that my firmware was BUJI4 when i got the tablet.
Click to expand...
Click to collapse
Really strange, tried also flashing only the pda but odin will immediately fail. I have flashed again with the first JM6.
Sent from my GT-P1000 using Tapatalk
antz88c said:
Really strange, tried also flashing only the pda but odin will immediately fail. I have flashed again with the first JM6.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I have never flashed no modem or csc or repartitioned my flash , so i guess thats why i can downgrade.
Seems like u can downgrade if you don't use repartition however it is not clear why Odin fails if we try to repartition ...
Sent from my GT-P1000 using XDA App
Euro Galaxy Tab can´t downgrade...
I installed the JM6 taken from the first post of this thread: http://forum.xda-developers.com/showthread.php?t=854300
V1.7 ODIN3 flashing with files that included his pit (to repartition marked), PDA, CSC, and PHONE ...
When I tried to other ROMs have been impossible before. Consistent with ODIN errors that interrupt the process and let the tablet dead. Resusitaste flashing is only possible from the outset JM6 ...
It is an excellent ROM (fixed the Swype extrallendo and installing a ROM that came before).
Anyway, to be calmer, we expect a possible solution. Thanks.
Did you guys try one of the full newer than JJ4 firmwares from gsmpl.com ?
Those are full Odin separated pit/pda/csc/modem JJ6, JJ7 and JK2.
Look for P1000->... http://gsmpl.com/index.php?id=Do_Pobrania
No idea if it will downgrade. Just trying to help.
Yes, and NO, that doesn't work either...
FredBE said:
Did you guys try one of the full newer than JJ4 firmwares from gsmpl.com ?
Those are full Odin separated pit/pda/csc/modem JJ6, JJ7 and JK2.
Look for P1000->... http://gsmpl.com/index.php?id=Do_Pobrania
No idea if it will downgrade. Just trying to help.
Click to expand...
Click to collapse
I have I9000DTJG4, some forums said there is froyo upgrade via kies, but my one still doesn't have. Tried to upgrade more than 4 different ROMs which I downloaded from samfirmware.com, but none of them is working. I have tried I9000XWJPA, I9000DTJP5, I9000DXJPA, I9000ZSJP3, I9000XFJP7, I9000XWJM8. Most of them get "Pass" in ODIN, but couldn't pass boot screen. Not sure why.
Found one customer ROM from www.Hiapk.com which is based on I9000XWJP6. It's working, but some of the feature I don't like. For example, there is no vibration on-off under messaging setting, only has on-off for the whole handset. I even tried stock I9000XWJP6, but still same result as other stock ROMs.
Could someone help me? Which froyo can i flash to my I9000DTJG4?
Look at DocRom in the development section.. If u want official froyo then, DTJP5 is the official one from kies
Sent from my GT-I9000 using XDA App
elhpianist said:
Look at DocRom in the development section.. If u want official froyo then, DTJP5 is the official one from kies
Click to expand...
Click to collapse
BTW ... which Doc's ROM BUJP8, JPA or JPO ?
I9000DTJP5 is the one you need. I did the following First flashed I9000XWJM8 with RE-Partition and 512.pit. Than I9000DTJP5 without RE-Partion no pit. I did a factory reset before and after flashing.
tragusman said:
I9000DTJP5 is the one you need. I did the following First flashed I9000XWJM8 with RE-Partition and 512.pit. Than I9000DTJP5 without RE-Partion no pit. I did a factory reset before and after flashing.
Click to expand...
Click to collapse
Thank you very much for these info. I did tried to flash to I9000XWJM8, but it won't pass the boot screen after flash rebooting. It comes up the animation with the sound, then it just stays there.
Also I have tried to flash DTJP5 directly, the result was same as flashing I9000XWJM8.
Not sure what's the problem.
tragusman said:
I9000DTJP5 is the one you need. I did the following First flashed I9000XWJM8 with RE-Partition and 512.pit. Than I9000DTJP5 without RE-Partion no pit. I did a factory reset before and after flashing.
Click to expand...
Click to collapse
Thanks alot, it's working as following your steps.
Hi, I got the JPY ROM from the thread in the general discussion, and any time i have tried to flash it onto my phone, the phone refuses to start properly. It just vibrates a couple of times and black screens.
I am using Odin 1.3 and PIT 512 for this as it says on SamFirmware.com.
Is this the ROM not working properly, or me doing something wrong?
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
tackygr said:
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
Click to expand...
Click to collapse
haha, thanks mate, i forgot to try that, i'll give it a go later.
topcat888 said:
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
Click to expand...
Click to collapse
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
hi there same thing happened to me i updated this thru samsung kies im stock at black screen would factory reset make my phone work again? i need help please please please
dopeee said:
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
Click to expand...
Click to collapse
I am already rooted so should I un-root before flashing or just leave it rooted..???
And also have SGS Battery Icon Mod installed, again does this have to be un-installed before flash or not..??
Can someone post a link to the right ROM that I can use to update using ODIN that will not result in existing data lost ? The one that I downloaded is a single tar file (Size - 298,890KB) that contains these files. If this is the right file, do i just specify the tar file in the PDA and uncheck repartition ?
modem.bin
param.lfs
zimage
cache.rfs
factoryfs.rfs
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!
I have a rom that is just 1 file:
FROYO:
NEE.tar (PDA)
and another rom is 4 files:
Gingerbread:
CSC-XXJV1.tar
PDA-XWJVB.tar
PHONE-XXJVK.tar
pit512.pit
I want to mix this 2 ROM and the result is something like this:
CSC-XXJV1.tar
NEE.tar <-- It's from FROYO
PHONE-XXJVK.tar
pit512.pit
IS THAT WORK ?!
I risked and try that.
result => It's worked HoHaa
Vogie said:
I risked and try that.
result => It's worked HoHaa
Click to expand...
Click to collapse
It worked because CSC files, Modems (Phone) and .pit settings are totally firmware agnostic. All three work with both Froyo and Gingerbread interchangeably.
The pit file simply tells Odin how to set up the partitions. The CSC is the localization info and the Modem is the radio. Both the CSC and the Modem can be flashed via Recovery after install, so there was no real need to flash them at the same time, but it didn't appear to hurt. Likely what happened is they just flashed over the modem and CSC installed by the PDA file.
However, you may want to check in About to confirm the JVK modem is what you ended up with.
Thanks for info @rschenck
I went to downgrade boot loader to FroYo (from Gingerbread). and after that I understood that boot.bin and slb.bin is in PDA file.
I have this files:
boot.bin, slb.bin from JPU ROM
PDA_XWJS8_NEE
CSC_EZbase-XXJV1
PHONE_EZbase-XXJVK
I flashed by ODIN 1.7 and heimdall but it's failed (softbreak)
after that i backed to XWJS8 and i couldn't downgrade boot loader
What's wrong here ?! Do boot.bin and sld.bin is different in different ROMS ? what i need to repartition?
I'm confused sorry
Vogie said:
Thanks for info @rschenck
I went to downgrade boot loader to FroYo (from Gingerbread). and after that I understood that boot.bin and slb.bin is in PDA file.
I have this files:
boot.bin, slb.bin from JPU ROM
PDA_XWJS8_NEE
CSC_EZbase-XXJV1
PHONE_EZbase-XXJVK
I flashed by ODIN 1.7 and heimdall but it's failed (softbreak)
after that i backed to XWJS8 and i couldn't downgrade boot loader
What's wrong here ?! Do boot.bin and sld.bin is different in different ROMS ? what i need to repartition?
I'm confused sorry
Click to expand...
Click to collapse
You are over complicating your life to an amazing degree...if all you need are the froyo bootloaders there are much easier ways.
Just search in Google for ezbase and android soul...on that website are excellent instructions for flashing ezbase via odin. From there you can flash anything you want.
Don't try to invent the wheel messing with bin files.
Sent from my GT-I9000 using XDA Premium App
COME ON!!!!
There is a lot of FROYO ROMs and I know that! but I want to try everythings!
and if you not in mood to help, please Don't disapointed me :\
1. anyway, I just want to know is different between boot.bin and slb.bin in all FroYo ROMs?
2.for repartition What's need in put in ODIN ? (just pda, or pda,csc,phone) ?
3.is boot.bin and sld.bin dangerous ?
Thanks again for respond.