my moto x4 started shutting down by itself after i installed the android 10 treble project, however i already got back to my old rom and it keeps shutting down by itself. what can I do?:crying:
Did you create a TWRP backup?
What steps did you take to install the android 10 GSI? And to get back to your previous rom?
Flashing stock should fix almost any issue.
How to Flash Official/Factory Firmware (Moto X4)
blueberry.sky said:
Did you create a TWRP backup?
What steps did you take to install the android 10 GSI? And to get back to your previous rom?
Flashing stock should fix almost any issue.
How to Flash Official/Factory Firmware (Moto X4)
Click to expand...
Click to collapse
I didn't backup twrp
https://youtu.be/M2qqM46JXnM (I used this tutorial to install Android 10)
https://youtu.be/eCGB-yxC09w (and I used this one to go back to stock rom)
Related
Hey guys, i just got a Moto X Sprint XT1056, i got it from someone, it has been rooted, running on android 4.4.2
My moto x has an front facing camera issue, which the button to switch between the camera disappeared. So, i just try to take the OTA. After finishing download the OTA, i installed it anyway, then it got bootloop, power off every 10 seconds
Then i go to TWRP to factory reset the phone, but ACCIDENTIALLY, i also wipe the system. Then when i want to reboot the phone, it said "NO ROM installed"
I download Nexus Experience rom for moto X, then, i pushed it into internal storage using adb. But when i flashed it, it said failed! NO MD5 file found
What should i do?
Is the bootloader unlocked?
Flash the stock firmware again. Same Android version that was on it or higher. NOT a lower version. If the Ota did flash, then you need to flash that version. Best to anyway really, to be safe.
See the complete moto X guide in the general section, the returning to stock portion of the guide.
?
Hello All,
I am having an issue with restoring to OOS 4.0.1
I am currently running Lineage OS 14.1 OnePlus 3T Dedicated Build and I want to restore to my backup of OOS 4.0.1 (Android 7.0.0). After I wipe and restore to my OOS backup, it gets to the OOS boot screen (the white dot with red dots circling it) but it will never get past that screen and I am not sure what to do to get it to fully boot. Any help is very appreciated. Thank you
I guess you have to flash the 4.0.1 firmware to be able to boot. I had a similar issue while restoring a 4.0.2 based ROM.
Primokorn said:
I guess you have to flash the 4.0.1 firmware to be able to boot. I had a similar issue while restoring a 4.0.2 based ROM.
Click to expand...
Click to collapse
I suppose that would make sense huh? Thank you for the obvious answer. Can't believe I didn't think of that. I guess I just assumed that lineage wouldn't update my firmware but that was an incorrect assumption!
Hey,
I recently rebranded my VTR-L29C185 to VTR-L29C432. After that, I installed the latest Project Treble Resurrection Remix ROM from phh. The device is rooted, bootloader and frp unlocked, and has TWRP 3.2.1 FromFuture (the one for Treble roms) installed.
I made a full backup with TWRP 3.2.1-0 for stock EMUI 8.0 before the rebrand process.
My question is how do I go back to stock but keep the rebranding ? Do I just need to restore the backup without its OEMInfo via TWRP ? Search a VTR-L29C432 ROM and flash it through fastboot ?
The reason I want to go back to stock is mainly because of the many camera functions you cannot use on these roms even after installing the Huawei Camera (or the Google Camera for Kirin, which I recommend for users of these roms) and because of a few freezes and graphical glitches. Apart from that it's a very smooth and stable experience and I didn't face any big issue (gapps and root are working).
I would really appreciate your help. Thank you !
Anyone ?
should be fine to restore just the system image, because treble roms are just system partitions.
DallasCZ said:
should be fine to restore just the system image, because treble roms are just system partitions.
Click to expand...
Click to collapse
So you mean when I restore the backup I only chose System ? And I will keep the rebranding ?
edited because of double post
yes
DallasCZ said:
yes
Click to expand...
Click to collapse
I did it, I'm on stock again now, but strangely it shows me there's an update with the same version as installed. If I try to run the update it reboots to try to install the update (logically) but with the fact I have TWRP installed it doesn't do so.
I also noticed the designs I download (which worked before on stock) do not apply. What does this mean ?
Thanks
Chrisgia said:
I did it, I'm on stock again now, but strangely it shows me there's an update with the same version as installed. If I try to run the update it reboots to try to install the update (logically) but with the fact I have TWRP installed it doesn't do so.
I also noticed the designs I download (which worked before on stock) do not apply. What does this mean ?
Thanks
Click to expand...
Click to collapse
flash stock recovery and let the update to be installed.
DallasCZ said:
flash stock recovery and let the update to be installed.
Click to expand...
Click to collapse
Done. Everything normal again now, thanks !
Hi.
I have a Moto X 2014 and I usually download the ROMs from here without a problem. I was able to install all Android 9.0 Pie ROMs, but no Android 10 ROM for Moto X 2014 worked.
It even goes through TWRP without giving an error, but when it goes to install it gets stuck in the ROM logo and does not come out of it. Stay in the eternal loop. If anyone can help me, please.
* Text written with the help of Google Translate.
MaryLBrasil said:
Hi.
I have a Moto X 2014 and I usually download the ROMs from here without a problem. I was able to install all Android 9.0 Pie ROMs, but no Android 10 ROM for Moto X 2014 worked.
It even goes through TWRP without giving an error, but when it goes to install it gets stuck in the ROM logo and does not come out of it. Stay in the eternal loop. If anyone can help me, please.
* Text written with the help of Google Translate.
Click to expand...
Click to collapse
I had some similar problems ...
do a clean install and preferably for the BitGapps package!
follow the developers' instructions ...
Unfortunately it does not install even following the instructions. See what I've tried:
- Erase the memory
- File system change
- Restart recovery
I'm getting sad to think that I won't be able to install a ROM with Android 10 on my Moto X 2014. If you have any suggestions I'm willing to listen to you, Punk77.
Hello
which ROM are you trying to install?
I got CrDroid, Havoc, AOSP here and I'm currently using Arrow !!!
only Arrow works with Open gapps the others only with bitgapps ...
what file system is used and what version of TWRP?
Hi, again punk-77.
I've tried to install all Android 10 ROMs. I've been instructed to use the ext4 file system but it didn't work. I use the most current version of TWRP which is 3.3.1-0 Victara. I returned in ROM Stock but still not installing the ROMs Android 10 is in loop.
MaryLBrasil said:
Hi, again punk-77.
I've tried to install all Android 10 ROMs. I've been instructed to use the ext4 file system but it didn't work. I use the most current version of TWRP which is 3.3.1-0 Victara. I returned in ROM Stock but still not installing the ROMs Android 10 is in loop.
Click to expand...
Click to collapse
use f2fs for /data, ext4 for system...
I am currently using the Arrow ROM, I did a clean flash and the zips in the following sequence:
1 - ROM
2 - Open Gapps (pico)
3 - Magisk
CrDroid ROM
1 - ROM
2 - Magisk
3 - BitGapps
AOSP ROM
1 - ROM
2 - Magisk
3 - BitGapps
HAVOC ROM
1 - ROM
2 - BitGapps
3 - Magisk
“Data”???
There is no partition with that name.
Could you please let me know which file system would be ideal for each partition please.
For example, from what you told me the system is ext4.
wipe - advanced wipe - click on data
changes in the same way as with the system ...
https://youtu.be/nlkVeYhKEIU
Yes! Sorry. I got confused in the translation.
I changed Data to f2fs and System to ext4 and it still doesn't work.
Unfortunately. I don't know what to do anymore except to be sad. :crying:
MaryLBrasil said:
Yes! Sorry. I got confused in the translation.
I changed Data to f2fs and System to ext4 and it still doesn't work.
Unfortunately. I don't know what to do anymore except to be sad. :crying:
Click to expand...
Click to collapse
of all available ROMs the only one that I managed to install without fail on the first attempt was Arrow !!!
something I noticed here, was that if I leave the phone connected to the PC, it gets stuck on the startup screen.
try this way with the Arrow ROM:
1- clear all data, system, chache ...
2- pass the ROM, Gapps ... to the cell phone
3 - disconnect the phone from the PC ...
4 - install ROM -Gapps - Magisk (optional) ...
Edit: Bitgapps also works with the Arrow ROM ...
however, you are unable to restore backups saved to Google Drive.
I did as directed. Only ROMs with Android Pie and below complete the installation.
It's sad because maybe only one developer knows why this happens... :crying:
Thank you so much for trying to help me!
MaryLBrasil said:
I did as directed. Only ROMs with Android Pie and below complete the installation.
It's sad because maybe only one developer knows why this happens... :crying:
Thank you so much for trying to help me!
Click to expand...
Click to collapse
unfortunately I don't know how to help anymore ...
now we can only try the support of the developers for a solution !!!
Edit: Foi lançada atualizações das ROMs...
I just tested it and it still doesn't work.
It remains in an infinite loop...
Frustrated. Very, very, very frustrated!
For me it was also stayed bootlogo on aosp 10.0, came from stock rom. then with flash drive via otg cable installed aosp 8.0 (i was bootloped). Phone survived, but 2 times i have no success in install Android 10, tried clean flash and all etc necessary
Hi, gioyocho how are you?
Did you manage to install any Android 10 ROM on your Moto X 2014? Sorry is that for me it was not clear in the translation.
(My original language is Portuguese BR).
MaryLBrasil said:
Hi, gioyocho how are you?
Did you manage to install any Android 10 ROM on your Moto X 2014? Sorry is that for me it was not clear in the translation.
(My original language is Portuguese BR).
Click to expand...
Click to collapse
only tried 10.0 aosp, but 8.0 aosp is stable for me
I understand. Thanks for commenting.
I think I tested all the Android 10 ROMs that were posted on the XDA for the Moto X 2014. None worked on my device even following all the instructions that were given to me.
Arrow
just now, successfuly installed Arrow 10.0.0 Vanilla rom. but it has battery problems as i guess, as all custom roms. only 6.0 stock works good without battery issues
Will this work with TWRP 3.2.1 or do I need to update?
jwhite5840 said:
Will this work with TWRP 3.2.1 or do I need to update?
Click to expand...
Click to collapse
Hi, how are you?
The latest official version of TWRP for Moto X 2014 is 2017 correct?
I have the latest version downloaded from the official website.
https://twrp.me/motorola/motorolamotox2014.html
I have been using my Moto x4 since 2017 running stock ROM. Now, Moto has stopped android updates to x4. So, I decided to try android 10 based pixel experience ROM from XDA. But, I have some doubts.
Previously, I have used a Xiaomi device and I had experience with installing custom rom. But, for moto I am confused. Please correct me if I doing something wrong.
Steps to follow:
1.Unlock bootloader.
2. Install twrp.
3. Install copyparitions zip file. ( Id this file suitable to my device? Because, android one variant has 3gb, 32 gb storage, am using 4gb, 64gb variant. Does it causes any trouble?
4. Install firmware. ( My device running on android 9, with latest security patch of sep 2019..ppw.29.69.40.4. so, do I need to install firmware.
5. Backup EFS etc.
6. Install pixel experience zip.(pixel plus)
7. Reboot to bootloader.
8. Install twrp
9. Install gapps. ( I wished to install gapps from open gapps, which contains nearly stock Google apps. Can I use aroma variant).
10. Reboot to system.
After installation: (without rooting)
a. Can I use google pay, and banking apps. Is it safe.?
b. Which camera is got installed? Gcam 7.0+ or Moto camera.
How was the bugs, battery performance?
Thanks in advance.
rahulg09 said:
I have been using my Moto x4 since 2017 running stock ROM. Now, Moto has stopped android updates to x4. So, I decided to try android 10 based pixel experience ROM from XDA. But, I have some doubts.
Previously, I have used a Xiaomi device and I had experience with installing custom rom. But, for moto I am confused. Please correct me if I doing something wrong.
Steps to follow:
1.Unlock bootloader.
2. Install twrp.
3. Install copyparitions zip file. ( Id this file suitable to my device? Because, android one variant has 3gb, 32 gb storage, am using 4gb, 64gb variant. Does it causes any trouble?
4. Install firmware. ( My device running on android 9, with latest security patch of sep 2019..ppw.29.69.40.4. so, do I need to install firmware.
5. Backup EFS etc.
6. Install pixel experience zip.(pixel plus)
7. Reboot to bootloader.
8. Install twrp
9. Install gapps. ( I wished to install gapps from open gapps, which contains nearly stock Google apps. Can I use aroma variant).
10. Reboot to system.
After installation: (without rooting)
a. Can I use google pay, and banking apps. Is it safe.?
b. Which camera is got installed? Gcam 7.0+ or Moto camera.
How was the bugs, battery performance?
Thanks in advance.
Click to expand...
Click to collapse
Bootloader unlock
Then twrp flash
Then backup Efs and perssit files (backup everything)
Then go with clean flashing rom
First flash partition zip
Then flash the rom
And you are good to go
Right now only big I've faced is do not disturb is not working but developer is active....we may expect fix soon
As for now... latest build everything is working super great
Yes you can use banking apps ..it is totally safe
It comes with moto camera
Uditchamlingrai said:
Bootloader unlock
Then twrp flash
Then backup Efs and perssit files (backup everything)
Then go with clean flashing rom
First flash partition zip
Then flash the rom
And you are good to go
Right now only big I've faced is do not disturb is not working but developer is active....we may expect fix soon
As for now... latest build everything is working super great
Yes you can use banking apps ..it is totally safe
It comes with moto camera
Click to expand...
Click to collapse
Very much thanks bro. As I have said, I'll be running unrooted. Does it require root permission for running banking apps like gpay?
rahulg09 said:
Very much thanks bro. As I have said, I'll be running unrooted. Does it require root permission for running banking apps like gpay?
Click to expand...
Click to collapse
No root required ....im also running non rooted and still using gpay and Paytm
firmware flashing
Uditchamlingrai said:
Bootloader unlock
Then twrp flash
Then backup Efs and perssit files (backup everything)
Then go with clean flashing rom
First flash partition zip
Then flash the rom
And you are good to go
Right now only big I've faced is do not disturb is not working but developer is active....we may expect fix soon
As for now... latest build everything is working super great
Yes you can use banking apps ..it is totally safe
It comes with moto camera
Click to expand...
Click to collapse
So, is it not required to flash firmware before flashing pixel experience rom? Kindly reply.
Is there anyone who have qcn or efs backup , if you have then can you provide that for Moto X4 or say (XT1900-2)