Related
I searched and didn't find this topic.
My HTC Pure occasionally will not respond to touch. This usually happens after taking a call while it's been hooked up to the sync & mymobiler via USB.
Normally doing a soft reset or two, and playing with it in mymobiler would get the screen responding correctly but today it has stayed untouchable.
The bottom buttons, for picking up and hanging up calls, work fine, but unless I go into mymobiler, the screen is unresponsive to any touch.
I haven't dropped it nor gotten water all over it and all the programs seem to work as they should.
Any suggestions or has the display crapped out?
On a side note I did get an gwes.exe error this evening too.
It's possbile that your digitizer is going out but I would perform a hard reset first and see if that clears up the issue.
I am not sure whether it is my mind playing trick with me or not, but I feel like my phone is less sensitive after I did the hard reset (power+volume down). Sometimes I need to press 2-3 times because the first light tap was not detected.
So is there anyway to increase the sensitivity?
I have the same problem, but no idea that is the hardware or only software problem.....
Fresh owner of this Optimus 2X in France, in our community, frandroid.com, we encounter the same problem , I think this is a software issue.
Did someone already contact LG??
Maybe they should include this into the bug list thread.
May I know were you guys having this problem since it is out of the box? or after reset?
I have the same problem started from day 1 till now
I have the same issue and already thought I'd be the only one having this problem.
I would not say it's a problem with sensitivity, but it feels like the touchscreen goes into some kind of sleepmode where then you need to press a second time, to wake it up.
Continuous touching is no problem. (like when typing rapidly on the keyboard)
This video is not from me, but it shows the problem.
Have a look at 13:28 and 13:37. The reviewer tries to hit the "Ackermann" entry, but the touchscreen does not recognize the touch. At 13:37 the guy has to press another time to get the entry selected.
http://www.youtube.com/watch?v=VRid-Yhu7Gg&feature=player_embedded
Yes! The touchscreen is definitely less sensitive than my old HTC Hero, and gets quite frustrating sometimes when a scroll misses the first part of the movement or a click is missed.
Sent from my LG-P990 using XDA App
just in case, are you guys using 20110218 baseband too?
The same problem here. If I unlock the screen and then tap on any on screen apps, I need to touch again for it to open. Only the first time though, after that it function ok. I think this is a bug and needs to be fixed... I have my pc for double-click.
Yep, count me in. Same problem here. Sometimes screen taps aren't registered. Will do some research later on, but I think it's a software problem. (maybe you have to tap 2x as fast )
Hi,
same problem here!
Potentially a driver issue. A Nexus S user had a similar issue in this thread: http://forum.cyanogenmod.com/topic/18431-tuning-driver-to-deal-with-unresponsive-touchscreen/
He managed to tweak the driver and it works fine now. Need to know C++ (I think?) to understand though.
9mmBullet said:
Potentially a driver issue. A Nexus S user had a similar issue in this thread: http://forum.cyanogenmod.com/topic/18431-tuning-driver-to-deal-with-unresponsive-touchscreen/
He managed to tweak the driver and it works fine now. Need to know C++ (I think?) to understand though.
Click to expand...
Click to collapse
I see, then probably they will fix it on the next update/gingerbread?
Same issue here.
Correct me if I'm wrong, but the problem seems to be that the screen has zero tolerance when it comes to tapping and swiping together. If you tap and slide your finger a bit directly after the tap, the tap is ignored. In other words your tap has to be a steady tap when you click on a button or an app. Right on the spot and with no swiping or sliding afterwards. I can't reproduce this on any of my other devices.
Ergo, it seems that the natural tapping I'm used to isn't working on the x2. It seems like I have to adjust my tap. I think that this could in principle be solved with a setting somewhere, because clearly the x2 is capable of registering this in for example a web page.
The great thing of this is that you can safely tap and swipe in the app drawer to scroll up and down or left and right. The downside is that a tap with a little swipe isn't registered at all. I would say that LG has choosen here for a wrong setting.
My personal experience about screen sensivity.. can you confirm if it's the same for your device?
I noticed a strange touch response.. and after some tests, I can say that the touch screen and icons are influenced by the surface where the phone was put!
with the phone in my hands, it's all ok (only sometimes - rare - I need to tap more than once).
If I put the phone over a glass surface (like a glass table) without touching it with both hands, the touch and the icons not respond!! NEVER!
If I put the phone on my scanner the touch screen works ok, but the icons not (or only few and rare taps was detected).!
If I put the phone over my big Onkyo amplifier.. It works like in my hands.. or better!! even without touching with hands.. only with a finger!
Put it back on my glass table.. and all stop working again. If I put a aluminium foil under the phone (between phone and table).. the touch and the icons works again !!
If I put it on the bed.. it don't work.
LG support say that they have tested the phone about this issue after my report.. but no strange response was detected by them. I don't know if they really tested it..
Try it and let me know what you think about!
tested on glass surface, I can press and swipe through pages with a finger without problem.
it is true that my device is not so responsive, but aint reaching that level yet
i read about a similar behaviour on other devices because some devices need a proper grounding for the capacitive screen to work correctly. You can find this problem via google.
Some devices have problem in a car-mounting, for example.
But i think thats not the problem the thread-opener talked about?
Guys I'm looking to get this phone and after reading Engadgets review of the X2 where they mention that the screen is not as sensitive to the touch as other phones I got a bit worried and started googling which lead me here!
Is this true? The screen isn't very sensitive and you have to apply more pressure than other capacitive phones?
I know that the OP is talking about a different issue but I reckon LG will get that sorted out via software update, or at least hope so!
Please do post your experience about the screen sensitivity of the X2 as this is putting me off. I currently have the Motorola Milestone 2 which is very sensitive to the touch even with a screen protector on it.
Cheers
Hey guys.
I've got a pretty annoying problem. The screen of my z1 is too sensitive to the touch. Sometimes when I use the device it starts to open random apps and it's because of the oils of the fingers. When I wipe the screen it's working perfectly fine but if even a little liquid touches the screen it starts acting all weird. I've noticed that this is happening after I removed the Anti Shatter Film. I tried to edit the clearpad.idc which is supposed to decrease the sensitivity levels but I haven't noticed any difference at all. I have read about other people having similar problems like screen not recognizing the touch every now and then. It works perfectly fine for me when on flat surface and everything. The touch input in diagnostics app never fails as long as the screen is clean so I don't think the hardware is faulty(at least not in my case.) I would appreciate any help! Thanks
EDIT: Actually fixed this by editing the clearpad.idc. I set the screen touch filter to 6 and then set the chmod 644 permissions which I didn't do before and this might've caused it to not work before. Been testing for 10 minutes and everything working perfectly. )
idoluvizsick said:
Hey guys.
I've got a pretty annoying problem. The screen of my z1 is too sensitive to the touch. Sometimes when I use the device it starts to open random apps and it's because of the oils of the fingers. When I wipe the screen it's working perfectly fine but if even a little liquid touches the screen it starts acting all weird. I've noticed that this is happening after I removed the Anti Shatter Film. I tried to edit the clearpad.idc which is supposed to decrease the sensitivity levels but I haven't noticed any difference at all. I have read about other people having similar problems like screen not recognizing the touch every now and then. It works perfectly fine for me when on flat surface and everything. The touch input in diagnostics app never fails as long as the screen is clean so I don't think the hardware is faulty(at least not in my case.) I would appreciate any help! Thanks
Click to expand...
Click to collapse
Isn't it supposed to be that sensitive so it can work with a pencil as a stylus? At least I think this was the phone Sony said can do that.
Hi everyone, I was hoping I could get some help with my LG P990 (Optimus 2x), I recently changed the screen and digitizer (it was broken so I replaced it myself with a new original one).
The thing is that since then sometimes the digitizer just stops working. The screen works, the buttons (screen lock and volume up and down) works, but the touch screen is dead. Obviously I can't reboot the phone so I take off the battery and put it back, the phone shuts down, reiniciates and there it goes, everything is good again, working perfectly... until it stops and the whole thing goes like this over and over...
Any clues of what might be causing this? I think it should be something software related since the digitizer works PERFECTLY until it kinda freezes... but I'm not sure, really not a smartphone guy so...
Thanks a lot!
P.S.: Tried to use the developer tools > locate pointer function and touched everything everywhere accross the screen and it's fully working, no dead zones, so the problem is "random" i mean it just stops working randomly, and I also didn't notice any patterns like "it freezes when i'm doing something specifically" it's totally random, happened when receiving a call, when making a call, while playing a game, while just browsing through the menu, while trying to unlock the screen... at least APPARENTLY random, maybe something i didn't notice if I do, i'll add later...
gutavu said:
Hi everyone, I was hoping I could get some help with my LG P990 (Optimus 2x), I recently changed the screen and digitizer (it was broken so I replaced it myself with a new original one).
The thing is that since then sometimes the digitizer just stops working. The screen works, the buttons (screen lock and volume up and down) works, but the touch screen is dead. Obviously I can't reboot the phone so I take off the battery and put it back, the phone shuts down, reiniciates and there it goes, everything is good again, working perfectly... until it stops and the whole thing goes like this over and over...
Any clues of what might be causing this? I think it should be something software related since the digitizer works PERFECTLY until it kinda freezes... but I'm not sure, really not a smartphone guy so...
Thanks a lot!
P.S.: Tried to use the developer tools > locate pointer function and touched everything everywhere accross the screen and it's fully working, no dead zones, so the problem is "random" i mean it just stops working randomly, and I also didn't notice any patterns like "it freezes when i'm doing something specifically" it's totally random, happened when receiving a call, when making a call, while playing a game, while just browsing through the menu, while trying to unlock the screen... at least APPARENTLY random, maybe something i didn't notice if I do, i'll add later...
Click to expand...
Click to collapse
I have EXACTLY the same problem. Did you fixed it?
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
I would say it's a warranty job, just tried turning my brightness to zero and you can still see the screen.
I did have a similar problem on an old note that had root and custom rom though but I had somehow set the volume rocker to control brightness and it had lowered itself to minimum in my pocket
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
Try pressing and holding Volume down and power button for 5 to 7 seconds to force power off, then try to boot to download mode Volume Down + Bixby + Power button and see if the download mode screen shows......if not then probably a bad screen.
Sent from my God Mode 8
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
KEVIN88GT said:
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
Click to expand...
Click to collapse
Yeah that sucks, i can imagine..... i too hate the idea of refurbished units being swapped for warranty....bs, should be brand new unit!
Sent from my God Mode 8
so I had it replaced under warranty through T mobile. Refurb phone will come in today. One quesion. Should I let the Tmobile techs do the data/settings transfer from old phone to new one or just do everything myself from scratch (which will obviously take longer).
This happened to my phone twice for the past month or so. (both in Nougat and Oreo - Non rooted) Black screen but phone seems to be responding -- I can receive calls and notifications etc -- And force reboot doesn't fix it. I've also tried drainging the phone when it first happened to me but doesn't work. HOWEVER, it gets okay so randomly. Like I just left it for couple of hours and it just worked when I hit the power button.
I did tried bringing the device to Samsung but what they did is to just manually upgrade/reset the software in their end which I could have done in my part but I just let them do it. They told me to come back if it happens again which is kinda BS.
I can conveniently say this is a Hardware issue. I will wait for it to happen again on my phone and request for a replacement. Phone is 4 months old when it first happened.
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Reprocrastinator said:
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Click to expand...
Click to collapse
If you're under warranty it will likely be a free repair, unless they find other damage. Like moisture damage.
As far as fixing it yourself, it's just about as cheap to have Samsung do it than it is to buy the parts yourself. It's $229 for Samsung to do it, and you'll maintain the water resistance rating.
same has happened to me
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
This has just happened to my note 8 too. I was about to update it and had started it. set my phone down and picked it up and phone screen is black but can hear the haptic feedback.
I can only see the lock screen and the notifications. Everytime I try to unlock my phone I only get to see a glimpse of the notescreen and then the screen turns black. Even when I try to go to camera through the lock screen the screen goes black too. When I charge my phone it heats up so I haven't really charged it as well. Has this also happened to anyone? It seems as if the phone's sensitivity still works in all places but when I unlock it the screen just goes black.
I also have problem of freezings and always rebooting. Tried soft and hard resets/factory reset. Still same problem. This phone has hardware issue. Do not buy.
I realize this thread is quite old but I have this exact same issue now. I have managed to discover some other information by playing around with various settings which are noted below. To begin with, I was able to used the AOD hack posted above for a while but it no longer works. The only way I can get my screen to come back is with a soft reset - but as soon as the screen times out or i turn it off, it goes black, with or without AOD enable. All the on screen buttons still work as well as the haptic feedback - I just can't see anything.
Now on to what I have found:
One thing I have found is if I turn off adaptive screen brightness and crank the brightness slider to the right, when it goes black I can faintly see some of the buttons - enough that I can turn the phone off or restart it from the power menu (If I switch the default setting to night that also helps to see the buttons a bit better). Also, if I enable night mode I can also see the brightness slider faintly but when I slide it left, it just makes the screen completely black and when I slide it right, it only returns it to the very faint brightness level.
So at this point I am stuck. To summarize the issue:
1. When the screen either times out or turns off, it is still "alive" but goes black. It will not return to normal brightness.
2. Turning off adaptive brightness and cranking brightness slider to right allows you to see faint buttons after screen times out but won't return to normal brightness.
3. Enabling night mode helps to see the faint buttons, in particular the brightness slider a bit better. However the screen still cannot return to normal brightness.
4. The only way to get the screen back to full brightness (albeit temporarily until the next timeout) is to turn off the phone or reset from the power menu; or soft reset holding volume down + power simultaneously.
Hopefully someone else has figured out a way to recover this. I am on Android 9 with Samsung UI 1.0
Phone is completely stock, never rooted and completely out of warranty.