Related
Hi,
I found it on web and i don't really remember from where i got it but its not my work so all credits to whom so ever it may be concerned.
##Please proceed at your own risk, i am note responsible for any damage to your device or any data loss.
Below is a zip file that will root nearly any version of MIUI on Redmi Note 4g.
Tried and tested on miui 7 & 8.
##Need Someone to test on MIUI 6##
Its a superuser flashable zip rooting file for Redmi Note 4g only.
https://drive.google.com/file/d/0B8CWcCKLg4hraUZXMDVLc050TWM/view?usp=drivesdk
**To Root**
Please make a backup of your data before starting to root your device.
Recommended: Do not connect to any internet network such as wifi,gprs,3G/4G...
to avoid update searching issue till the process is over.
1)Download the above rooting .zip file from the above URL and save it into your internal/external SD Card(Recommend in your internal SD Card).
2) Now open Updater App of MIUI and open options.(3 dots in the right at the top)
3) Now choose the option "Choose Update Package". Now the file manager will get open.
4)Locate the .zip file that you downloaded in the file manager and click on it(For MIUI 8: After clicking on the file it gets selected and then click on ok).
5)Wait for the process to get over. Phone will restart and you will see the superuser app installed now.
6)Now open the app and a pop up will come to update su.Click on Ok and in that select Normal/CWM or TWRP as per the recovery you have installed on your device.
7) That's it now your device is successful rooted.
##Note: Its not a native root.
**To UNROOT**
1)Just Open The SuperSU App
2)Click on Settings. Then, click On Full Unroot option.
3)Then Click Continue, and the unrooting will begin.
4)After a reboot, your phone should be clean of the root.
I used KINGRoot. Just download the APK and run. So far no any issue seen
Schuan said:
I used KINGRoot. Just download the APK and run. So far no any issue seen
Click to expand...
Click to collapse
Ya its an alternative method to it but using kingroot my experience is not good.
It couldn't not help to fully unroot my device also if i needed to use super su it gave me problem.
If it's working for u then its well and good but if u like super su more then u can use the above method.
I m using note 4g used king root. it did not root. I m using latest firmware. what shoud i do please help
Vivek Kantesaria said:
I m using note 4g used king root. it did not root. I m using latest firmware. what shoud i do please help
Click to expand...
Click to collapse
Give a try to the method that i have mentioned...
Sry for late reply
nrathod3 said:
Give a try to the method that i have mentioned...
Sry for late reply
Click to expand...
Click to collapse
Okay brother not an issue
Vivek Kantesaria said:
Okay brother not an issue
Click to expand...
Click to collapse
Did it work for you?
nrathod3 said:
Did it work for you?
Click to expand...
Click to collapse
Yes then i flashed twrp and RR :angel:
Vivek Kantesaria said:
Yes then i flashed twrp and RR :angel:
Click to expand...
Click to collapse
Cool
iT may cause your phone no reaction while connecting to The Pc if you use The latest supersu version on supersu official website. I prefer phh's superuser . I rooted my mido perfectly With it.
I tried the above method but I accidentally selected twrp method when su asked to update.
Now the phone stuck at MI boot loop screen I can only access to fast boot mode but can't enter recovery mode.
So any help ?
Is the file size 2.81 MB only?
Phone stuck/ Damaged
Im also having same problem.
After flashing Su, it asked for reboot. When i reboot, it is stuck in MI logo and not restarting. i observed this for more than 10 hrs. When i tried to start with recovery, again it is stuck is FASTBOOT screen and not progressing. My phone is not usable now. Please help
aadison said:
I tried the above method but I accidentally selected twrp method when su asked to update.
Now the phone stuck at MI boot loop screen I can only access to fast boot mode but can't enter recovery mode.
So any help ?
Click to expand...
Click to collapse
How can i root my Xiaomi Redmi Note 4G with PC. Only fastboot mode is showing in my phone, no other option is coming.
only TA-1003！！！
if you are using TA-1000，you have to flash this before.
https://forum.xda-developers.com/nokia-6/development/problem-firmware-nokia-6-ta-1000-t3640667/page1
Nokia6 Qitu twrp 3.1.1 recovery Toolkit (9008 ports, miflash brush into), is the world's first bar, recovery function is normal, with root function
download link: https://1drv.ms/u/s!AhvzBzjU0o8filtloJ6szD51cGtT
Recovery automatically decrypt data, without formatting, function properly
This mobile phone is special, unable to unlock, need to enter the 9008 port recovery flash method, similar to coolpad1, you can use the new version of the miflash
Recovery advanced, there are supersu root function, be sure to flash this root, or restart directly, 99% may not boot, do not use other link to download the supersu.
As for how to enter 9008 cmd：ADB reboot EDL can not, short access
As for how to enter the recovery, l do not know how to enter, ADB reboot recovery can enter or terminal：reboot recovery
bug:i don't know
this is Chinese twrp ，If you are speaking English, please try the English twrp theme.
Can you please add some more detail to the post? Like something for a noob user?
singhnsk said:
Can you please add some more detail to the post? Like something for a noob user?
Click to expand...
Click to collapse
maybe you should this
https://forum.xda-developers.com/nokia-6/development/problem-firmware-nokia-6-ta-1000-t3640667
after flash this firmware
1.install miflash
2.download recovery.zip
3.unpack recovery.zip（you can get a folder named recover）
4.lunch miflash in start menu
5.Click “drive” above miflash and click “reinstall”
6.Restart the computer, disable the driver mandatory signature
7.lunch miflash，click ”select“ and select recovery floder
8.enter your phone into com9008 mode
9.Connect the computer and mobile phone by using cable
10.click “load device(
As the bootloader isn't unlockable yet, any flashing of the recovery, kernel or rom will most likely end in a brick. This may not be recoverable...
ultramag69 said:
As the bootloader isn't unlockable yet, any flashing of the recovery, kernel or rom will most likely end in a brick. This may not be recoverable...
Click to expand...
Click to collapse
you can recovery your device at here https://forum.xda-developers.com/nokia-6/development/problem-firmware-nokia-6-ta-1000-t3640667
Mate, have you already flashed this recovery via edl?
Denver163 said:
Mate, have you already flashed this recovery via edl?
Click to expand...
Click to collapse
yes，i flashed this recovery by 9008mode，it is working
can anyone here with the original TA-1000 ROM do a backup of the ROM and post it here? many of us having the phone but with a custom ROM, need the actual ROM. thanks!
iammrwesley said:
can anyone here with the original TA-1000 ROM do a backup of the ROM and post it here? many of us having the phone but with a custom ROM, need the actual ROM. thanks!
Click to expand...
Click to collapse
So far, there are no custom ROM
Do you have root access after installation from this recovery?
18227077056 said:
So far, there are no custom ROM
Click to expand...
Click to collapse
U sure?
https://forum.xda-developers.com/nokia-6/development/problem-firmware-nokia-6-ta-1000-t3640667
This is the TA-1003 ROM, it is counted as custom ROM when install on TA-1000 phone, it won't get any OTA update.
binarnh said:
Do you have root access after installation from this recovery?
Click to expand...
Click to collapse
my Nokia 6 have already rooted.
iammrwesley said:
U sure?
https://forum.xda-developers.com/nokia-6/development/problem-firmware-nokia-6-ta-1000-t3640667
This is the TA-1003 ROM, it is counted as custom ROM when install on TA-1000 phone, it won't get any OTA update.
Click to expand...
Click to collapse
this is an official ROM，The official said: any changes to the phone firmware will result in no updates, even if you flashed an official firmware by personal.
18227077056 said:
this is an official ROM，The official said: any changes to the phone firmware will result in no updates, even if you flashed an official firmware by personal.
Click to expand...
Click to collapse
But that modyfied rom too much power consuming! Guys, if you got stock ta1000, dont even think of that damn ta1003rom.. it got native 6 cores active all the time while stock got 2 cores active in stanby.. and no ota update is sad. I think i will try stock ta1025 from nokia 5 instead.. or wait a bit for some new mods
Denver163 said:
But that modyfied rom too much power consuming! Guys, if you got stock ta1000, dont even think of that damn ta1003rom.. it got native 6 cores active all the time while stock got 2 cores active in stanby.. and no ota update is sad. I think i will try stock ta1025 from nokia 5 instead.. or wait a bit for some new mods
Click to expand...
Click to collapse
Nokia 5？what do you want to do？
Something outstanding to make everybody gone crazy
Root undetected after flash to TA-1003 Rom and recovery files later...
edit. my fail.... I lunch twrp and I don't understand chinese language... help
edit. 2. Works!! Thanks people
I confirmed this works.....
Just force enter EDL (not using the flash cable method but the chocolate bar method....lol)
Flash the Qitu TWRP recovery...sorry all in chinese
https://drive.google.com/open?id=0B-xwlXVEN2U2UTUtUVU5MmtfdWs
https://drive.google.com/open?id=0B-xwlXVEN2U2UVZ3eEFSVDF3TFU
https://drive.google.com/open?id=0B-xwlXVEN2U2UXg0NS1ndExzRG8
https://drive.google.com/open?id=0B-xwlXVEN2U2eUFJX01mbUtTcE0
Installed Adway, Lukcy patcher and busybox!
https://drive.google.com/open?id=0B-xwlXVEN2U2Smh4UVBDMV9yZmc
https://drive.google.com/open?id=0B-xwlXVEN2U2VUdBU1FNUFNsLVE
https://drive.google.com/open?id=0B-xwlXVEN2U2dzNOMUNtSkluT2s
Backup system in TWRP.
https://drive.google.com/open?id=0B-xwlXVEN2U2bVc4TS1XbHk2NXM
18227077056 said:
my Nokia 6 have already rooted.
Click to expand...
Click to collapse
Is substratum works without any other modification on this rom?
binarnh said:
Is substratum works without any other modification on this rom?
Click to expand...
Click to collapse
maybe yes
??
chandypandy said:
??
Click to expand...
Click to collapse
TWRP
https://forum.xda-developers.com/moto-x4/development/root-moto-x4-t3696180
icarolessa said:
TWRP
https://forum.xda-developers.com/moto-x4/development/root-moto-x4-t3696180
Click to expand...
Click to collapse
Tried, doesn't work for the google fi variant
chandypandy said:
Tried, doesn't work for the google fi variant
Click to expand...
Click to collapse
TWRP Official
https://dl.twrp.me/payton/twrp-3.2.1-0-payton.img.html
It doesn't work
Works for my Android One X4
I think it is probably better to start with
https://twrp.me/motorola/motorolamotox4.html
chandypandy said:
It doesn't work
Click to expand...
Click to collapse
What problem are you having? Did you enable usb debugging?
The hardware is the same.
Twski said:
The hardware is the same.
Click to expand...
Click to collapse
https://dl.xda-developers.com/4/4/6....png?key=TLP9_o5Ecn2Dys5ZhIE3tw&ts=1522291461
This is the error
icarolessa said:
What problem are you having? Did you enable usb debugging?
Click to expand...
Click to collapse
https://dl.xda-developers.com/4/4/6....png?key=wua4zgqvFDcsrdLnpuLl_w&ts=1522291710
Our devices don't have a recovery partition to flash to.
Read the install instructions correctly:
https://twrp.me/motorola/motorolamotox4.html
You should use "fastboot boot twrp-3.2.1-0-payton.img" instead.
Then, follow along:
This will temporarily boot TWRP on your device. If you are using a lockscreen pin/pattern/password and do not get prompted to enter your password, reboot to the bootloader and try again. Go to install and browse to the zip and install the zip. The zip will install TWRP to both boot slots. Installing TWRP at this time will remove root if you are currently rooted.
Click to expand...
Click to collapse
chandypandy said:
https://dl.xda-developers.com/4/4/6....png?key=TLP9_o5Ecn2Dys5ZhIE3tw&ts=1522291461
This is the error
Click to expand...
Click to collapse
I think the right command is this:
fastboot flash boot [file name].img
No,
If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest firmware for your device and reflash the boot image.
Click to expand...
Click to collapse
chandypandy said:
https://dl.xda-developers.com/4/4/6....png?key=TLP9_o5Ecn2Dys5ZhIE3tw&ts=1522291461
This is the error
Click to expand...
Click to collapse
I could be wrong but it seems like you are trying to flash TWRP to the recovery partition and there's no such thing on this phone. You have to temporarily boot TWRP and the keep following the instructions.
Is anybody able to backup / restore the phone with android one on encrypted file system??, im using the official twrp, but restoring backups just cause bootloops
is it necessary to unlock the bootloader before?
If you're asking if the bootloader needs to be unlocked to install magisk, absolutely!
Sorry for the dumb question but how do you unlock the bootloader on the Fi Android one Version?
Potential fix
chandypandy said:
https://dl.xda-developers.com/4/4/6....png?key=TLP9_o5Ecn2Dys5ZhIE3tw&ts=1522291461
This is the error
Click to expand...
Click to collapse
If you are still haven't fixed this yet the issue is you need to fastboot boot the boot twrp image and then flash the flash image inside twrp. The guide on TWRP official will give you a guide on how to do this, the files required are also there.
Hi All, I have a N950F/DS currently running Stock N950FXXU3CRE5 FW and every time I install twrp and do the "Data mount fix" my phone refuses to boot unless I root it with Magisk or SuperSU. I dont want root but I do want twrp, can someone help with this problem thanks in advance.
What are you trying to achieve with Data mount fix?
try RMM-State_Bypass_Mesa_v2 so oem unlock would not turn off after reboot here
bluecub1st said:
What are you trying to achieve with Data mount fix?
try RMM-State_Bypass_Mesa_v2 so oem unlock would not turn off after reboot here
Click to expand...
Click to collapse
For some reason this didn't work for me. I kept losing OEM unlock anyway. I ended up having to not reboot my phone for a week.
I found a solution. I downloaded two boot imgs without the "dm verity" and my phone booted with twrp. Also it doesn't remove twrp after rebooting
help
Vell123 said:
I found a solution. I downloaded two boot imgs without the "dm verity" and my phone booted with twrp. Also it doesn't remove twrp after rebooting
Click to expand...
Click to collapse
can you help me like you did I have the same problem and I do not know what to do
deyher2007 said:
can you help me like you did I have the same problem and I do not know what to do
Click to expand...
Click to collapse
Sure what binary are you currently using?
U4
Vell123 said:
Sure what binary are you currently using?
Click to expand...
Click to collapse
U4
i dont have any dm verity for u4 besides that sounds like snapdragon or the american model so this method wont work for you friend
How to root any version of the OnePlus 7T Pro!
1. Make sure your bootloader is unlocked!
2. Once you're unlocked enter the following ADB commands to extract your current boot image (Your phone needs to be on)
adb shell dd if=/dev/block/bootdevice/by-name/boot_a of=/boot_a.img
adb pull /boot_a.img pathinyourpc
Click to expand...
Click to collapse
3. Download & install Magisk Manager on your phone
4. Put the boot_a.img file on your phone
5. Open the magisk manager app and click the "Advanced Settings" button, then enable "Prserve AVB 2.0/dm-verity & Preserve force encryption", then select the top "Install" button and select "Patch to boot image" and select the boot_a.img
6. Now magisk will create a magisk patched boot image file, put that on your computer
7. Now enter the following ADB command
adb reboot fastboot
fastboot --set-active=a
fastboot boot pathtomagiskpatched.img
Click to expand...
Click to collapse
8. Now you'll boot into the system, reopen the magisk app and click the top install button again and select "Direct install", then reboot
Congratulations you've now successfully rooted your phone!
EDIT: This guide is wrong.
Check these references for the proper guide to root. OP refuses to acknowledge it's wrong even when I pointed it out to him with proof.
https://forum.xda-developers.com/showpost.php?p=81023631&postcount=144
^^^
Mainly this one.
https://forum.xda-developers.com/showpost.php?p=81105485&postcount=171
https://forum.xda-developers.com/showpost.php?p=81106827&postcount=173
-----
Now I have something so do for the weekend, thanks
Just a question, have you tried Viper4Android (if your use it)?: Use 2.7.1.6 stable version.
hi,
tryed it out.. When i boot your patched image.. there is no install button in magisk. It tolds me that i am already on the newest version.
Second.. WLAN isnt working any more. Cant enable wlan. When i reboot with stock img. everything is fine.
Dukynuky said:
hi,
tryed it out.. When i boot your patched image.. there is no install button in magisk. It tolds me that i am already on the newest version.
Second.. WLAN isnt working any more. Cant enable wlan. When i reboot with stock img. everything is fine.
Click to expand...
Click to collapse
Yes it says its installed thats correct but you need to install it again in the magisk app so it stays after restarting the phone. I don't know about WLAN tho
Can you turn on Wifi ?
When i turn it on. It is disabled at the end.
There are similar problems in the 7t forums. Seems a problem with the used magisk version for the boot image.. did you use the canary magisk files ?
and yes.. I know why i need to install. But the linked version of magisk says only.. uninstall..
Edit: i have a european version of the oneplus 7t pro .. and can you provide the original boot image.
I can confirm I have successfully rooted using this method, and WIFI is working fine. Thank you very much, OP and everyone involved, no wits time to set up my device
Ah! Will do this immediately when I get home.
I tried magisk and now it loops to fastboot, does anyone know to recover from this? Does the msm tool for OP7T Pro?
edit: flashed the original boot img and boots fine, whever i try to boot magisk patched it bootlops because faulty drivers
to clear up, i tried installing viper4android driver directly from the app, so i guess theres residue left
Lossyx said:
I tried magisk and now it loops to fastboot, does anyone know to recover from this? Does the msm tool for OP7T Pro?
Click to expand...
Click to collapse
did you install modules ? try booting the patched boot image from here and then, uninstall the modules again...
Works like a charm!
Minor thing you may want to clarify (I know you know, but to prevent confusion for readers), you give a warning that this will wipe all data, but that is not exactly true. Unlocking the bootloader wipes all data, but that step is not part of your instructions. Just following your steps on an already unlocked phone does not wipe the phone.
Thanks to everyone who made this possible so soon!
Dukynuky said:
did you install modules ? try booting the patched boot image from here and then, uninstall the modules again...
Click to expand...
Click to collapse
please see my edited reply, i installed directry through viper4android app, no the module
Dukynuky said:
Can you turn on Wifi ?
When i turn it on. It is disabled at the end.
There are similar problems in the 7t forums. Seems a problem with the used magisk version for the boot image.. did you use the canary magisk files ?
and yes.. I know why i need to install. But the linked version of magisk says only.. uninstall..
Edit: i have a european version of the oneplus 7t pro .. and can you provide the original boot image.
Click to expand...
Click to collapse
got ist working.. layer 8 error.. didnt had the ota update installed.
Updated oxygen os.. then wifi is working. also used canary magisk files.. works perfekt.. thanks
Dukynuky said:
Can you turn on Wifi ?
When i turn it on. It is disabled at the end.
There are similar problems in the 7t forums. Seems a problem with the used magisk version for the boot image.. did you use the canary magisk files ?
and yes.. I know why i need to install. But the linked version of magisk says only.. uninstall..
Edit: i have a european version of the oneplus 7t pro .. and can you provide the original boot image.
Click to expand...
Click to collapse
my wifi works perfectly fine, I have the EU version too.
I attached screenshots of what to do with the installed, please select the direct install option and then reboot!
droidvark said:
Works like a charm!
Minor thing you may want to clarify (I know you know, but to prevent confusion for readers), you give a warning that this will wipe all data, but that is not exactly true. Unlocking the bootloader wipes all data, but that step is not part of your instructions. Just following your steps on an already unlocked phone does not wipe the phone.
Thanks to everyone who made this possible so soon!
Click to expand...
Click to collapse
I have a warning above the instructions already, I think you might have missed it
Lossyx said:
I tried magisk and now it loops to fastboot, does anyone know to recover from this? Does the msm tool for OP7T Pro?
edit: flashed the original boot img and boots fine, whever i try to boot magisk patched it bootlops because faulty drivers
to clear up, i tried installing viper4android driver directly from the app, so i guess theres residue left
Click to expand...
Click to collapse
I also bootlooped as well, I tried to install liveboot and i guess that didnt work lol
anyways, I fixed my bootloop by booting the unpatched boot img and then doing a factory reset in the settings, after that you can just boot to the magisk boot img again!
Lossyx said:
please see my edited reply, i installed directry through viper4android app, no the module
Click to expand...
Click to collapse
Use the module next time!
HolyChickenGuy said:
I have a warning above the instructions already, I think you might have missed it
Click to expand...
Click to collapse
I'm not sure where the misunderstanding is coming from, I know that you give that warning. What I mean is that strictly speaking following your steps does not wipe the phone, unlocking the bootloader wipes the phone. But you don't have that step in your instructions. See what I mean? .
When I read your steps, I was like "wipes my phone how?" Maybe booting your image would wipe my phone or something? I'm glad it didn't .
I just thought for clarity's sake it would be good to make that clear in the steps that's all!
droidvark said:
I'm not sure where the misunderstanding is coming from, I know that you give that warning. What I mean is that strictly speaking following your steps does not wipe the phone, unlocking the bootloader wipes the phone. But you don't have that step in your instructions. See what I mean? .
When I read your steps, I was like "wipes my phone how?" Maybe booting your image would wipe my phone or something? I'm glad it didn't .
I just thought for clarity's sake it would be good to make that clear in the steps that's all!
Click to expand...
Click to collapse
Oh sorry, yeah I rewrote it to make it clearer. Unlocking the bootloader will wipe your data
Sent from my HD1913 using Tapatalk
HolyChickenGuy said:
I also bootlooped as well, I tried to install liveboot and i guess that didnt work lol
anyways, I fixed my bootloop by booting the unpatched boot img and then doing a factory reset in the settings, after that you can just boot to the magisk boot img again!
Click to expand...
Click to collapse
Damn, you are my hero. Did a factory reset and followed the OP again, now everything is fine and I'm rooted. Thank you again.
edit: also, for safety precaution, disable automatic updates in Developer options
https://topjohnwu.github.io/Magisk/tutorials.html#ota-installation
Great, I'll check back in on this tomorrow and see how everyone is getting on before I try. Had a skim through here this morning before mine arrived and didn't see anything so set up as is.