Database Develop

[Share][ROM] [EOL] [6.0.1] MIUI 8 stable for galaxy S3 GT-i9300

For all those who want to install a stable miui 8. here it is . this rom is from an chinese website, at the start it had a lot of bloatware so i had modified the rom and removed all of the bloatware and tried to englishize it. this rom boots up without any problem and does not consume a lot of ram, so feel free to install this rom ! .
Installation Instructions-
! TWRP recovery is recommended !
! Your phone should be charged to 100% !
Download and copy the rom file to SD Card.
Boot into the recovery and take a thorough backup of your current rom incase if anything goes wrong.
After its completed, Wipe cache, dalvik,system and data.
After that, Flash the ROM file which is located in your SD Card .
After its completed, reboot to system.
The first boot may take time so be patient.
Gapps installation [optional but recommended]
The rom contains google installer app so no need of gapps package.
Open google installer app and press the green button and it will check for all the not installed google apps and it will download all of the gapps required and it shows a screen of installation of apps where you have to press on install and wait for some time and repeat this step for installation of other google apps.
After this , it will show some force closes of google play services, so to solve this, go to settings>installed apps>downloaded apps>click on google play services and scroll down until you find Permissions manager and click on it and allow all of the permissions required for it, repeat this step for all of the other google apps until you notice any google apps is not force closing.
After all of these are done, Voila! you can use this rom !
Change logs-
Working RIL (Calls and data)
Removed some chinese apps for better performance.
Added google installer for simple installation of the gapps.
Tried to englishize the rom.
Downloads- ALL MIUI8 BUILDS HERE
If you like my works, then Buy Me A Coffee: http://buymeacoff.ee/IHR197v
sorry for my english if you didn't understood it properly
XDA:DevDB Information
MIUI 8 for galaxy S3, ROM for the Samsung Galaxy S III I9300
Contributors
sonic_sakthivel123
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Rooted, custom recovery installed like TWRP
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 7.3.17
Stable Release Date: 2018-05-13
Created 2018-05-16
Last Updated 2019-05-21

Hello guys! i have updated the rom to V3 and added some tweaks
sonic_sakthivel123 said:
For all those who want to install a stable miui 8. here it is . this rom is from an chinese website, at the start it had a lot of bloatware so i had modified the rom and removed all of the bloatware and tried to englishize it. this rom boots up without any problem and does not consume a lot of ram, so feel free to install this rom ! .
Installation Instructions-
! TWRP recovery is recommended !
! Your phone should be charged to 100% !
Download and copy the rom file to SD Card.
Boot into the recovery and take a thorough backup of your current rom incase if anything goes wrong.
After its completed, Wipe cache, dalvik,system and data.
After that, Flash the ROM file which is located in your SD Card .
After its completed, reboot to system.
The first boot may take time so be patient.
Gapps installation [optional but recommended]
The rom contains google installer app so no need of gapps package.
Open google installer app and press the green button and it will check for all the not installed google apps and it will download all of the gapps required and it shows a screen of installation of apps where you have to press on install and wait for some time and repeat this step for installation of other google apps.
After this , it will show some force closes of google play services, so to solve this, go to settings>installed apps>downloaded apps>click on google play services and scroll down until you find Permissions manager and click on it and allow all of the permissions required for it, repeat this step for all of the other google apps until you notice any google apps is not force closing.
After all of these are done, Voila! you can use this rom !
Change logs-
Working RIL (Calls and data)
Removed some chinese apps for better performance.
Added google installer for simple installation of the gapps.
Tried to englishize the rom.
Downloads- https://drive.google.com/open?id=1s2JGE8xZ3qOFVtFlmV9DlpqcVL6Q1Ce6
copy and paste this link in your browser and download the rom.
sorry for my english if you didn't understood it properly
XDA:DevDB Information
MIUI 8 for galaxy S3, ROM for the Samsung Galaxy S III I9300
Contributors
sonic_sakthivel123
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Rooted, custom recovery installed like TWRP
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 7.3.17
Stable Release Date: 2018-05-13
Created 2018-05-16
Last Updated 2018-05-16
Click to expand...
Click to collapse
Hello guys! i have updated the rom to V3 and added some tweaks!
Change log V3-
added some tweaks
fixed mi music player not able to read music contents off the sd card or internal storage.
added htc keyboard and music player (you can uninstall htc music player if not needed).
Bugs and workarounds-
Mi camera force closes when switching to front camera.
when going to settings>about phone>system update, the settings force closes.
flashing procedure-
same as the earlier version of this rom.
Uploading the rom link soon! so please wait

Here you go guys the link for V3
Here you go guys the link for V3-
download- GT-I9300_MIUI 8_CLEAN_V3
Enjoy guys:good:

How about battery or SOT brother...Screenshoot if you have..

Nurrafik1973 said:
How about battery or SOT brother...Screenshoot if you have..
Click to expand...
Click to collapse
i have not not calculated it, but its decent. my phone's battery is bloated so the SOT might differ.

Nurrafik1973 said:
How about battery or SOT brother...Screenshoot if you have..
Click to expand...
Click to collapse
screenshots are in screenshot tab

Its good to see a Stable Miui, launcher use to crash in all the earlier miui rom..Can u please confirm if Whatsapp video call is working??

whatsapp video call is not working.
avishek83 said:
Its good to see a Stable Miui, launcher use to crash in all the earlier miui rom..Can u please confirm if Whatsapp video call is working??
Click to expand...
Click to collapse
No the whatsapp video call is not working for now but i'm trying to fix it but I'm consistently failing in it .

sonic_sakthivel123 said:
No the whatsapp video call is not working for now but i'm trying to fix it but I'm consistently failing in it .
Click to expand...
Click to collapse
Expected so...cos cyanogen based all 6.0 MM roms has broken hwc ...which was fixed in recent versions of lineage os N roms...if only u can make a miui build on lineage 15.1..it will work

do you mean lineage 14.1 ?
avishek83 said:
Expected so...cos cyanogen based all 6.0 MM roms has broken hwc ...which was fixed in recent versions of lineage os N roms...if only u can make a miui build on lineage 15.1..it will work
Click to expand...
Click to collapse
do you mean lineage 14.1 ?, because lineage 15.1 is not developed currently for our galaxy s3:crying:
So if anyone can help me building miui 9 for our device which is based on lineage 14.1 could be helpful and i have made an test build of miui 9 based on marshmallow but unfortunately the launcher force closes and because of that the whole ui becomes unresponsive:crying:. so if anyone is there to help me out to build miui 9 for our beloved device would be grateful.

avishek83 said:
Expected so...cos cyanogen based all 6.0 MM roms has broken hwc ...which was fixed in recent versions of lineage os N roms...if only u can make a miui build on lineage 15.1..it will work
Click to expand...
Click to collapse
hwc has nothing to do with WhatsApp calling. WhatsApp calling has been fixed on both CM13 and LOS14/14.1

Launcher crashes all the time, i can go into settings, but there is no "google services" to chose from.
Been rebooting, wiping cache, dalvik, etc, tried a lot of different stuff. I selected Swedish language, could that **** stuff up?
Edit: i was not 100% charged, but would that really make a difference?

erik1984 said:
Launcher crashes all the time, i can go into settings, but there is no "google services" to chose from.
Been rebooting, wiping cache, dalvik, etc, tried a lot of different stuff. I selected Swedish language, could that **** stuff up?
Edit: i was not 100% charged, but would that really make a difference?
Click to expand...
Click to collapse
maybe, did you performed a full wipe before installing the rom ?
because if you dirty flash the rom it could get unstable and you have to install the google apps manually using the google installer app present in the rom, procedures are given in the op

sonic_sakthivel123 said:
do you mean lineage 14.1 ?, because lineage 15.1 is not developed currently for our galaxy s3:crying:
So if anyone can help me building miui 9 for our device which is based on lineage 14.1 could be helpful and i have made an test build of miui 9 based on marshmallow but unfortunately the launcher force closes and because of that the whole ui becomes unresponsive:crying:. so if anyone is there to help me out to build miui 9 for our beloved device would be grateful.
Click to expand...
Click to collapse
It was. Lineage 15 has already in development . but dev gone

unknown said:
It was. Lineage 15 has already in development . but dev gone
Click to expand...
Click to collapse
can you provide me the link for that development page ? please

sonic_sakthivel123 said:
can you provide me the link for that development page ? please
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...14-1-i9300-t3544531/post76226256#post76226256

unknown said:
https://forum.xda-developers.com/ga...14-1-i9300-t3544531/post76226256#post76226256
Click to expand...
Click to collapse
there is no download link for it :crying: ?

sonic_sakthivel123 said:
there is no download link for it :crying: ?
Click to expand...
Click to collapse
Of course . Just tested lol :cyclops::cyclops:

sonic_sakthivel123 said:
maybe, did you performed a full wipe before installing the rom ?
because if you dirty flash the rom it could get unstable and you have to install the google apps manually using the google installer app present in the rom, procedures are given in the op
Click to expand...
Click to collapse
Hmm, yeah i did! Seems to be a language issue, try changing to Swedish and it starts crashing, other languages seems to work ok.

hi guys, anyone needs miui 9 theme for this rom?
hi guys, anyone needs miui 9 theme for this rom?
here it is - MIUI 9 theme
installation procedure-
see the video- https://www.youtube.com/watch?v=vG96PDUReus
for detailed installation procedure

[Guide] Install Android Pie 9.0 (via Semi-GSI Version)

This guide will show you how to install Android 9.0 Pie using the (semi) Generic System Image built using the official release.
What is project treble?
I would suggest checking out Android Authority's Gary explains video which goes quite well into depth.
How is it incorporated into this guide?
Well as you read from the title, we will be using a Semi-GSI, meaning we are using a ROM made for the OP5 (in this case the Mokee ROM) underneath and the GSI as the "frontend".
Download Section
Latest OxyenOS version [Required]
Latest Mokee Rom Nightly [Required]
NoVerity (Encryption Disabler) [Required]
PR1 - Semi-GSI [Required]
Post GSI - 1 [Required]
Post GSI - 2 [Required]
Post GSI - 3 [Required]
Working Google Play Services apk [Required for stability]
Working Google Camera apk [Assuming you need a camera]
Camera Fix zip [Assuming you need a working camera ?]
Lag Fix(Inside this folder, called DP5 lag fix)
Redflare Kernel (Latest "Treble" build) [Highly recommended for stability]
Click to expand...
Click to collapse
[0]Download everything above.
[1]MAKE SURE YOU ARE NOT ENCRYPTED
- If you are: Wipe Data
- If you aren't: Well, it's always better to start clean, Wipe Data
[2] Flash the latest OOS firmware
[3]Flash the Latest Mokee Nightly ROM
[4]Flash the good old NoVerity.
[4]Boot up the System
[5]Vaguely setup the phone, I'd suggest skipping the network connection process, just let the phone think you're called John Smith, it's not that important I swear ?
[6]Reboot back to Recovery
[7]Now the fun part, in TWRP > Install > Install Image (I too wondered when I would ever use it again) > Install the extracted image from P-PR1-sGSI-Aonly.zip
[8] MOUNT VENDOR, don't forget!
Goto Mount > Check "Vendor"
[9] Install all the Post files you downloaded (1, 2 and 3)
[10] Reboot to system
[11]Now the ROM is booted, however it is not yet ready for daily use. I invite you to reboot back to recovery.
[12]Using the Advanced > File Manager, move the Google Play Services apk you downloaded from above to system/priv-app, find the old one and replace it with the new one
[13]Again using the file manager, move the Google Camera APK to /system/priv-app
[14]Flash the Camera Zip fix
[15]Flash the Lag Fix
[16](Optional but highly recommended)) Flash latest Redflare Kernel
Facing any Issues? Ask me here or here
Disclaimer:
I am not responsible for anything that could happen to your device. I would also like to add that I am not at all taking credit for any work by developers who's source I mention. I am merely trying to spread the word about their development!
Click to expand...
Click to collapse

A lot of people have already been doing this for a while tbh, since the developer previews with the DP/PR roms here. There's even guides on YouTube for it.

It's not AOSP Pie, it's S-GSI rom ported from Google Pixel DP/PR releases. And like said djsubstrain a lot of guides has been posted in the original topic [ROM][P][PORTED][semi-GSI] Android P Developer Preview
I purpose my tutorial from the DP4/DP5/PR1 release :
\01/ Back up your personal data, sms (with SMS Backup & Restore), etc on your computer
.
.
\02/ For "cooking" lol you have need of all that :
a_ The latest nightly MoKee Rom (MK81.0) : MoKee support Treble from the 04102018 rom, so all MoKee are Treble friendly
Link : https://download.mokeedev.com/?device=cheeseburger
b_ A recovery TWRP Treble compatible, i advise the latest blu_spark "twrp-3.2.3-x_blu_spark_v8.83_treble-op5_op5t.img"
Link : https://forum.xda-developers.com/devdb/project/dl/?id=30102
c_ The no-verity v3 treble (by xXx) for keep your device decrypted
Link : https://forum.xda-developers.com/showpost.php?p=77023097&postcount=65
d_ The latest OOS 8.1.0 Beta Modem/Firmware (now OOS OB15), by shadowstep
Link : https://forum.xda-developers.com/showpost.php?p=76943628&postcount=8
e_ The latest Android P-PR1 (A Only for OP5/5T) : P-PR1-sGSI-Aonly.zip
Link : https://androidfilehost.com/?fid=5862345805528067641
/!\ When you have complete "P-PR1-sGSI-Aonly.zip" download, you must extract file for get "P_PR1_A_only.img" /!\
f_ The POST-sGSI files (for complete the Android P-PR1 installation) POST-sGSI_1_v0.14.zip, POST-sGSI_2_v0.17.zip & POST-sGSI_3_v0.5.zip
Link : https://androidfilehost.com/?w=files&flid=280192
g_ The FBE Disabler (for fix first boot after Android P installation in some devices) : FBE_Disabler.zip
Link : https://androidfilehost.com/?w=files&flid=279429
h_ Latest Google Apps (for fix/finish first Setup Wizard boot)
* Google Play services 13.2.72 (100400-206980955) : (arm-v7a + arm64-v8a / nodpi / Android 9+)
https://www.apkmirror.com/apk/googl...3-2-72-100400-206980955-android-apk-download/
* Google Play Store 11.2.14
https://www.apkmirror.com/apk/googl...2-14-all-0-pr-207207134-android-apk-download/
.
.
\03/ Go in TWRP Recovery, update TWRP with the \02/b_ version, reboot > recovery
.
.
\04/ In TWRP > Wipe > everything, all partitions and format Data (erase all your data, be sure you have backup your data BEFORE), reboot > recovery
.
.
\05/ In TWRP > Flash the \02/d_ OOS 8.1.0 Beta Modem/Firmware (OOS OB15), Flash the \02/a_ latest MoKee, and finally Flash the \02/c_ no-verity v3 treble
.
.
\06/ Don't Reboot, not needed!
.
.
\07/ Always in TWRP > Wipe "ONLY" partitions > Dalvik/Cache - Cache - System - Data
.
.
\08/ Now we will install the latest PR1 Android P (Yes!) : for more details, follow the topic
Link : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
For A-Only Treble Devices :
TWRP > Install > Image > Flash the \02/e_ "P_PR1_A_only.img" (extracted from P-PR1-sGSI-Aonly.zip)
TWRP > Mount > Select "Vendor" partition
TWRP > Flash the \02/f_ POST-sGSI zips from 1 to 3 in the order
TWRP > Reboot > System
If the boot stuck at the O+ logo, back in recovery, mount Vendor/System partitions : TWRP > Install > Flash the \02/g_ FBE_Disabler
.
\09/ Normally, system boot fine, but you will encounter a Setup Wizard problem (can't be finished/data restored) because some Google apps are not updated
Use the File manager and install the \02/h_ Google Play Services & Google Play Store APK
Reboot system
.
.
\10/ Now for Custom your P, you can read my post :
Link : https://forum.xda-developers.com/showpost.php?p=77188280&postcount=222
Enjoy
Click to expand...
Click to collapse
When you purpose a Guide, think to post also all the rom link/credits/sources, so thank you @erfanoabdi

I don't understand the hate lack of love for this guide. I have already done this process and been running S-GSI for a bit. I find this guide to be more straightforward, with better layout, and best of all it's located in the OP5 specific forum, instead of getting buried in a generic Treble thread. It also provided some really helpful resources for fixing some bugs I've been living with. Thanks to the OP for this, and I look forward to future developments of AOSP/GSI/Treble! (Maybe soon my phone won't need to think it's a Pixel XL!)
PS - to anyone reading, I'm looking for some help with the hw keys. End goal is to have BACK as the right hw key, and APP_SWITCH as the left. Remapping BACK and APP_SWITCH keys in /system/usr/keylayout/Generic.kl results in both my hw keys acting as APP_SWICH even though I have them seemingly set to BACK.
I can post my file as well as the original if it's helpful.

tsuttie99 said:
I don't understand the hate for this guide. I have already done this process and been running S-GSI for a bit. I find this guide to be more straightforward, with better layout, and best of all it's located in the OP5 specific forum, instead of getting buried in a generic Treble thread. It also provided some really helpful resources for fixing some bugs I've been living with. Thanks to the OP for this, and I look forward to future developments of AOSP/GSI/Treble! (Maybe soon my phone won't need to think it's a Pixel XL!)
PS - to anyone reading, I'm looking for some help with the hw keys. End goal is to have BACK as the right hw key, and APP_SWITCH as the left. Remapping BACK and APP_SWITCH keys in /system/usr/keylayout/Generic.kl results in both my hw keys acting as APP_SWICH even though I have them seemingly set to BACK.
I can post my file as well as the original if it's helpful.
Click to expand...
Click to collapse
I don't know where you have seen some "hating" in our words lol
Just explain that there from a long time tutorial, just explain that is not a AOSP rom but a S-GSI ported from Pixel II and advise the OP to always link/credits original thead....

Pho3nX said:
I don't know where you have seen some "hating" in our words lol
Just explain that there from a long time tutorial, just explain that is not a AOSP rom but a S-GSI ported from Pixel II and advise the OP to always link/credits original thead....
Click to expand...
Click to collapse
Fair enough. edited my post to reflect. But as far as I can tell, this seems like an original piece of work. Nothing to me flags as "stolen from someone else" or anything like that.

tsuttie99 said:
I don't understand the hate lack of love for this guide. I have already done this process and been running S-GSI for a bit. I find this guide to be more straightforward, with better layout, and best of all it's located in the OP5 specific forum, instead of getting buried in a generic Treble thread. It also provided some really helpful resources for fixing some bugs I've been living with. Thanks to the OP for this, and I look forward to future developments of AOSP/GSI/Treble! (Maybe soon my phone won't need to think it's a Pixel XL!)
PS - to anyone reading, I'm looking for some help with the hw keys. End goal is to have BACK as the right hw key, and APP_SWITCH as the left. Remapping BACK and APP_SWITCH keys in /system/usr/keylayout/Generic.kl results in both my hw keys acting as APP_SWICH even though I have them seemingly set to BACK.
I can post my file as well as the original if it's helpful.
Click to expand...
Click to collapse
This thread explains how to solve some problems like changing the buttons. It is in Spanish but nothing that Google can not solve.
https://www.htcmania.com/showthread.php?t=1431954

Can I do this using Pixel Experience ROM 9.0 instead of Mokee ROM?

Zakelinho said:
Can I do this using Pixel Experience ROM 9.0 instead of Mokee ROM?
Click to expand...
Click to collapse
Fairly sure answer is no. The rom you mentioned is just that, a rom, not treble based system image like described in this thread. Hope that helps!

Zakelinho said:
Can I do this using Pixel Experience ROM 9.0 instead of Mokee ROM?
Click to expand...
Click to collapse
No sorry you can't as PE doesn't support Treble. Don't worry it doesn't change anything to the UI or anything dw ?

tsuttie99 said:
Fairly sure answer is no. The rom you mentioned is just that, a rom, not treble based system image like described in this thread. Hope that helps!
Click to expand...
Click to collapse
Thank you for a quick reply. Don't quite understand Treble yet, just want to try Android Pie Will go for a OOS based 9.0 when released.

@Im_Mattgame
what about Q gsi ?
what vendor for running Q gsi on op5 ?

[ROM][GUIDE][UNOFFICIAL] ResurrectionRemix, LineageOS 15.1 + MORE! - Project Treble

Hello fellow Redmi S2 community
We finally have some custom rom/ Project Treble roms available to use
Please NOTE: Most are unstable as daily drivers as we still don't have developer support for our little device
Disclaimer
You know the drill, I'm not responsible for what happens to your device
good luck!
Let's begin!
I have been testing different project treble roms AND the Miui base roms (ranging from stable Miui9 - 10 and beta's) to find the most 'stable' daily driver
The best combination to date is using the Sep 11th MIUI 10 global stable with Resurrection Remix.
However if you do want to experiment, I highly recommend doing so as the Project Treble roms are updating constantly.
I will leave links to recommended ARM - A roms below and the recommended MIUI 10 base roms to flash over.
What you need:
Miui Base rom both Fastboot & Recovery (I recommend MIUI 10 stable)
Project Treble GSI (gemeric system.img)
Fastboot installed on your PC - there are plenty of tutorials, use google
GAPPS (please note I have had a lot of difficulties installing gapps and HIGHLY recommend you download a rom with gapps go pre-installed. You can use apps like LINK2SD to delete the Go-version and install the fulll version later)
A little bit of patience and time - first boots can take 5-10minutes
MIUI 10 Roms
https://www.theandroidsoul.com/xiaomi-redmi-s2-update/
[ARM - A] Project Treble Forums
https://forum.xda-developers.com/pr...-device-development/index-one-thread-t3812343
Fastboot for; Windows - Mac - Linux
https://www.lifehacker.com.au/2014/...ll-androids-adb-and-fastboot-tools-on-any-os/
Download links to Roms: Check the forum link above for more ROMS
9
https://sourceforge.net/projects/havoc-os/files/
8.1.0
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
https://androidfilehost.com/?w=files&flid=271118
https://androidfilehost.com/?w=files&flid=278902
https://androidfilehost.com/?fid=746163614322269351
Open GAPPS - I RECOMMEND USING MICRO-NANO-PICO. There are plenty of installation issues
https://opengapps.org/
Known Issues
There are many, let me know and I will compile a list
Brightness scaling
Auto-brightness
Instructions
Backup ALL data & partitions
Boot into TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Flash MiUi stock rom VIA fastboot
When rom flash is complete DO NOT BOOT THE ROM
Reboot into Fastboot
Make sure your GSI or system.img is in your Fastboot folder
Run this command: fastboot flash system the-name-of-your-rom.img
For example: fastboot flash system-180818-arm-aonly-vanilla-nosu.img
Now the ROM has been flashed, you can install TWRP, Magisk and GAPPS or just reboot into your new rom
If I helped you please thank me, it helps a lot enjoy your new project treble roms!​

DrDrag0n said:
Hi guys
First of all I am NOT A DEVELOPER!
There are plenty of issues with every AOSP treble build but they can function OKish for daily use.
You can install almost any Project Treble GSI that has support fo devicesr: ARM - A
I recommend using ResurrectionRemix - it has been the most stable for daily use I have experienced so far
https ://sourceforge. net/projects/resurrectionremix-oreo/files/armaonly/
^ ^
-remove the spaces-
You need the system.img (Generic System Image - these are used for project treble roms) to proceed further.
THIS WILL DELETE ALL OF YOUR DATA. MAKE A BACKUP OR SAVE YOUR FILES ELSEWHERE.
and of course I am not responsible for anything that happens to your phone, do this at your own risk and be prepared to face bugs! and use google to find out how to overcome them.
good luck my friends!
Known issues:
You tell me
Instructions :
Download the latest .img build and GApps
Download the latest Miui 10 Beta recovery rom current - MIUI 10 8.8.30
Reboot to TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Advanced wipe- system cache dalvik data
Flash latest stock rom - MIUI 10 8.8.30 beta
Reboot to fastboot
Plug your phone into your computer
copy your downloaded GSI.img to your adb&fastboot folder
Flash via fastboot: fastboot flash system the-name-of-your-rom.img
Reboot into TWRP & install Magisk
- PLEASE NOTE I HAVE HAD PROBLEMS WITH INSTALLING Gapps, PLEASE TRY AND FIND A ROM THAT COMES WITH Gapps. YOU CAN USE L2SD TO DELETE THE GO VERSION AND INSTALL THE FULL VERSIONS FROM PLAY STORE LATER-
Reboot
I am not a developer, this is not my main device but I am here to help solve any problems or try and help find solutions!
If any developer would like to give us support please let me know!
Click to expand...
Click to collapse
have you tried it

Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes tried and succeeded! ResurrectionRemix seems to be most stable to date but they update all the time so experiment yourself

DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
did u try the 64 bit one?

Is it 64bit or not?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
Is it 64bit? Is it stable to use as a daily driver?

DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
our system only support 32 bit only... dont try the 64bit... it might bring harm to your device

What about jio volte is it working on it and if yes then how because in minbe it is working

Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes, ResurrectionRemix works nicely

wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Yes I have tried the 64 bit ROMs,
They do not boot

Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
It's kind of stable, it gets better after every GSI update. ResurrectionRemix is the most stable that I have tried

Zaid Sheikh said:
What about jio volte is it working on it and if yes then how because in minbe it is working
Click to expand...
Click to collapse
Use MagiskModule VoEnabler to enable volte

If you try arm64aonly it will stuck at mi logo.

DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
I wanna use resurrection remix. Please give me link

M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
search on google you will get it

M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
Hey man, link is in OP, there are 2 spaces that need to be removed

M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/

can any1 confirm if volte works or not plz ?

xoloera2x said:
can any1 confirm if volte works or not plz ?
Click to expand...
Click to collapse
It depends what GSI you choose to work, but VOLTE is working on resurrection remix

Updated list of roms
New guide - better experience
Direct download links
Looking forward to seeing more Project Treble roms out there!

Please support rom
Some applications are not supported because they support 64-bit architecture, which refmi s2 cpu can run 64-bit version. However, the developer has only 32-bit in operating system, which causes a lot of problems. One of the major problems is that you can not install a 64 bit application. Please help make this a ROM.
Users of Redmi s2 have asked the developers of Xiaomi's way to make a new ROM that supports 64-bit architecture, but has ignored it and has never talked about it.

[ROM][UNOFFICIAL][pioneer][H3113][11] AOSP android 11

Hi, this is an AOSP 11 build using official Sony guide
It is a straightforward build, no customizations, no specific code, just standard AOSP with Sony kernel.
Contents
Android 11 AOSP, branch android-11.0.0, kernel 4.14, release build (not userdebug)
Stock AOSP apps: phone, contacts, calendar, camera, gallery, files, clock
There are no google services on AOSP, you're on your own if you want to install them. I personnaly use Aurora and F-droid to install more apps
Download
Build: android-11.0.0_r17
New build: android-11.0.0-r27
SHA256: 35a03ad0858313d03cdce18b2ba681c4cab085d4c67b0a61aac26489316e03ce android-11.0.0_r17.zip
SHA256: ddc4f8a28d6054387db9a2d6a27c514cf38f3f08001c8be3c9abfdd928e8a950 android-11.0.0_r27.zip
Please always check SHA256 after download
Installation
This will erase your data.
Follow official Sony guide from step 6.
Here is a summary:
Enter fastboot (switch off your phone, plug usb while pressing volume up, keep volume up until led comes blue)
Download Sony vendor image
Unzip it
Code:
unzip SW_binaries_for_Xperia_Android_11_4.14_v3a_nile.zip
Flash it
Code:
fastboot flash oem SW_binaries_for_Xperia_Android_11_4.14_v3a_nile.img
Download the build from link above
Unzip it
Flash images:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash userdata userdata.img (may be skipped for updating, backup your data anyway)
Disclaimer & support
This will erase your data.
You may brick your device.
This is an AOSP ROM, I am not a developper and do not provide support.
Feel free to discuss bugs here, and/or report them to either Google (AOSP bugs) or Sony (specific hardware bugs)
Status / what works
The build is quite stable and useable for everyday.
Works:
* calls
* SMS/MMS
* wifi
* bluetooth
* lte
* gps
* front/rear camera
* flash/torch
* rotation
* fingerprint
Bugs
* Editing pictures with the stock app does not work
* The phone won't boot if USB charger plugged in
XDA:DevDB Information
AOSP, ROM for the Sony Xperia XA2
Contributors
sam2oufguedin
Source Code: https://developer.sony.com/develop/...nstructions/build-aosp-android-android-11-0-0
ROM OS Version: 11
ROM Kernel: Linux 4.14
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2020-11-05
Created 2020-11-18
Last Updated 2021-01-12

sam2oufguedin said:
Hi, this is an AOSP 11 build using official Sony guide
It is a straightforward build, no customizations, no specific code, just standard AOSP with Sony kernel.
Contents
Android 11 AOSP, branch android-11.0.0_r17, kernel 4.14, release build (not userdebug)
Stock AOSP apps: phone, contacts, calendar, camera, gallery, files, clock
There are no google services on AOSP, you're on your own if you want to install them. I personnaly use Aurora and F-droid to install more apps
Download
Build: Use this link
SHA256: 35a03ad0858313d03cdce18b2ba681c4cab085d4c67b0a61aac26489316e03ce android-11.0.0_r17.zip
Please always check SHA256 after download
Installation
This will erase your data.
Follow official Sony guide from step 6.
Here is a summary:
Enter fastboot (switch off your phone, plug usb while pressing volume up, keep volume up until led comes blue)
Download Sony vendor image
Unzip it
Code:
unzip SW_binaries_for_Xperia_Android_11_4.14_v3a_nile.zip
Flash it
Code:
fastboot flash oem SW_binaries_for_Xperia_Android_11_4.14_v3a_nile.img
Download the build from link above
Unzip it
Flash images:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash userdata userdata.img
Disclaimer & support
This will erase your data.
You may brick your device.
This is an AOSP ROM, I am not a developper and do not provide support.
Feel free to discuss bugs here, and/or report them to either Google (AOSP bugs) or Sony (specific hardware bugs)
Status / what works
The build is quite stable and useable for everyday.
Works:
* calls
* SMS/MMS
* wifi
* bluetooth
* lte
* gps
* front/rear camera
* flash/torch
* rotation
* fingerprint
Bugs
* Editing pictures with the stock app does not work
XDA:DevDB Information
AOSP, ROM for the Sony Xperia XA2
Contributors
sam2oufguedin
Source Code: https://developer.sony.com/develop/open-devices/guides/aosp-build-instructions/build-aosp-android-android-11-0-0
ROM OS Version: 2.3.x Gingerbread
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2020-11-05
Created 2020-11-18
Last Updated 2020-11-18
Click to expand...
Click to collapse
Bro sodp has camera problem on nile platform
Is camera fixed in this?
Asking because it's mentioned in working column

Arbaazhussain said:
Bro sodp has camera problem on nile platform
Is camera fixed in this?
Asking because it's mentioned in working column
Click to expand...
Click to collapse
Yes, camera works.
This build includes this workaround described by sony to make camera works.
There are some random issues, but it is quite rare, and you just have to restart camera app to get rid of them.

sam2oufguedin said:
Yes, camera works.
This build includes this workaround described by sony to make camera works.
There are some random issues, but it is quite rare, and you just have to restart camera app to get rid of them.
Click to expand...
Click to collapse
Ok then I am gonna try and say the results here

Arbaazhussain said:
Ok then I am gonna try and say the results here
Click to expand...
Click to collapse
Did you succeed with the rom?

sam2oufguedin said:
Did you succeed with the rom?
Click to expand...
Click to collapse
Yes and sorry the post was unavailable due to some error in xda bacause they are migrating
Sir did u try gcam on it
I tried gcam but without gapps but didn't succeed in opening
So I want to know as I am not on it.
Nice work camera works very perfectly
Had problems in mtp don't know binary or build tried on v3
I even wanted to know whether gsis work in top of it
Very nice work

Please change from gingerbread to android 11 or android R

Arbaazhussain said:
Yes and sorry the post was unavailable due to some error in xda bacause they are migrating
Sir did u try gcam on it
I tried gcam but without gapps but didn't succeed in opening
So I want to know as I am not on it.
Nice work camera works very perfectly
Had problems in mtp don't know binary or build tried on v3
I even wanted to know whether gsis work in top of it
Very nice work
Click to expand...
Click to collapse
I'm using "open camera".
Indeed gcam requires play services. You may have luck with this but i didn't personally tried it

sam2oufguedin said:
I'm using "open camera".
Indeed gcam requires play services. You may have luck with this but i didn't personally tried it
Click to expand...
Click to collapse
Hmm
I have seen the post earlier it's just a gcam provider which requires microg right?

Arbaazhussain said:
Hmm
I have seen the post earlier it's just a gcam provider which requires microg right?
Click to expand...
Click to collapse
Just read doc from the link: "This app "simulates" the Google Play Services that the Google Camera app (Gcam) requires, allowing the camera app to be used on devices without Google Play Services."

sam2oufguedin said:
Just read doc from the link: "This app "simulates" the Google Play Services that the Google Camera app (Gcam) requires, allowing the camera app to be used on devices without Google Play Services."
Click to expand...
Click to collapse
Cannot flash gapps
I tried nikgapps android 11 macro
The system gets corrupted and doesn't boot goes in bootloop
Gcam is working fine

Cannot load any gsis on top of it please help me because i want to use gsi upon this

Only one build release?
Or more?

Arbaazhussain said:
Only one build release?
Or more?
Click to expand...
Click to collapse
I tried a build with latest december patches, but wifi was not working anymore

sam2oufguedin said:
I tried a build with latest december patches, but wifi was not working anymore
Click to expand...
Click to collapse
Oh even pe maintainer who maintains all devices facing issue in wifi maybe sodp problem
Bro can u decrease brightness values it too high at 0
Please do if u can please
And bro can u say me why gsis doesn't work please
I want gsis as I want customisation and also doesn't offer only aosp works even phh aosp works
It's like it's tagged to work only aosp

Arbaazhussain said:
Bro can u decrease brightness values it too high at 0
Click to expand...
Click to collapse
I agree about brightness.
Please file a bug report on Sony's bug tracker

sam2oufguedin said:
I agree about brightness.
Please file a bug report on Sony's bug tracker
Click to expand...
Click to collapse
Done bro

How to use gcc instead of clang?
U used gcc right?

Arbaazhussain said:
How to use gcc instead of clang?
U used gcc right?
Click to expand...
Click to collapse
Yes, only for rebuilding the kernel.
It is really painful to setup, I used this guide and some advises from this, but it is far from straightaway guide.
You'll have to checkout old versions of android prebuilt gcc to get gcc because it was removed on master...

sam2oufguedin said:
Yes, only for rebuilding the kernel.
It is really painful to setup, I used this guide and some advises from this, but it is far from straightaway guide.
You'll have to checkout old versions of android prebuilt gcc to get gcc because it was removed on master...
Click to expand...
Click to collapse
Thank you sir
Did u come across MTP problem in this build?
I got so I am asking

Hi, I published a new build with latest android security patch (2021-01-05).

[ROM][12][UNOFFICIAL]LineageOS 19.1[WIP]

Code:
*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Introduction
This is the LineageOS for OnePlus 6t
Click to expand...
Click to collapse
This rom is different from offical lineage by the means it build vendor from source and proprietary blobs instead of reusing oxygenos vendor image.
Monet included.
Installation instructions
1. Install R Stock Rom onto your phone , follow some tutorial you can find in this forum
2. Flash boot.img and dtbo.img by typing fastboot flash boot boot.img and fastboot flash dtbo_a dtbo.img and fastboot flash dtbo_b dtbo.img
3. Wipe your userdata by typing fastboot erase userdata
4. Reboot the phone and immeditly do the recovery key combination
5. In Lineageos recovery select install and then sideload from adb
6. On your computer type adb sideload pathtotheromzip and press enter
7. The rom should now be flashed , flash gapps and other mods like magisk the same way
Click to expand...
Click to collapse
Download
ROM
RECOVERY
Click to expand...
Click to collapse
Changelog
Code:
Current changelog:22.03.2022
[note] 1st Release of LineageOS 19.1
[new] Lineage 19.1 based on Android 12.1
[changed] idk anymore
[fixed] fod now works as intended thanks to the lineageos guys
Older changelogs:
Click to expand...
Click to collapse
Code:
Current changelog:23.11.2021
[note] 2nd Release of LineageOS 19.0
[new] mobile data works again
[changed] fixed mobile data
[fixed] mobile data
Code:
Current changelog:02.11.2021
[note] 1st Release of LineageOS 19.0
[new] sensors work now gapps work now
[changed] included monet theme engine
[fixed] sensors
[/HIDE]
FAQ
What doesnt work ?
you tell me
This rom is for fajita only
For Gapps i recommend NikGapps
Click to expand...
Click to collapse
Thanks To/Credits
Code:
@SGCMarkus
@LuK1337
Sources
Code:
[URL="https://github.com/J0SH1X/android_kernel_oneplus_sdm845"]Kernel[/URL]
[URL="https://github.com/J0SH1X/android_device_oneplus_sdm845-common"]Common[/URL]
[URL="https://github.com/J0SH1X/android_device_oneplus_fajita"]Device[/URL]
[URL="https://github.com/J0SH1X/proprietary_vendor_oneplus"]Vendor[/URL]

Rip Arrow Os

I don't understand why Arrow was dropped in favor of Lineage ? Is there any specific reason to it ?

Hey OP, The ROM link goes to the old Arrow ROM.

Release fajita-20211122 · J0SH1X/Lineage-OTA
host for json response file for supporting ota updates on unoffcial lineageos || EOL FIND ANOTHER IDIOT TO DO YOUR **** - Release fajita-20211122 · J0SH1X/Lineage-OTA
github.com

MrUrgit said:
Hey OP, The ROM link goes to the old Arrow ROM.
Click to expand...
Click to collapse
fixed

Adiker said:
I don't understand why Arrow was dropped in favor of Lineage ? Is there any specific reason to it ?
Click to expand...
Click to collapse
cause lineageos sources now cna be build without too much trouble and i only build lineageos normally

Updated latest build with working audio and bt and mobile data

Just tested latest build both VoLTE and VoWifi works, as for issues - so only FOD is pending

How do I mount the system as rewritable? I'm unable to in root explorer. Thanks for the rom it runs great so far. I have noticed a bug that status bar tuner doesn't open btw

Also, I don't believe that NFC is working correctly. I was unable to pay for gas, NFC kept turning on and off according to Google pay and trying to open the connectivity settings freezes and/or crashes the settings app, which actually happens on my pixels stable Android 12 anyway..lol.

I do have Magisk however all of my backing apps work and safety net is passing

For me dash charger isnt working.Start charging for a sec and then it stops. Quickcharge 3 charger works

Got this from Octobot, it was for PE12 but it works great. Flash this TWRP zip through FK kernel manager and reflash Magisk if you are rooted once TWRP boots. No crashdumps...etc.

Has anyone had luck getting this to work on Verizon. Just installed, and it doesn't detect sim

Is this project still alive? I switched because there were no updates. Probably going to stick with EVO 12 when released tomorrow, unless this is still in the works... I'll have to at least try it

Yeedatoy said:
Is this project still alive? I switched because there were no updates. Probably going to stick with EVO 12 when released tomorrow, unless this is still in the works... I'll have to at least try it
Click to expand...
Click to collapse
I'd assume the community took a break since it's the weekend of Christmas in the US, not sure if that would apply to the dev working on this project or not. I'd just be patient.

Of course. Im not one of those who nags at the guys who put in hard work to provide something for free, nothing irritates me more,lol. It's just been a while since the last release so im curious whether or not I should keep an eye on this thread or if Josh has moved on with something else for a while.

waiting for the stable version on oneplus 6

New Release of Lineageos 19.1
Download