Hi Guys,
I am happy owner of the MI8 right from the Beginning. I have always been a big fan of Xiaomi.
Now I had the problem, that my original USB C Charge Port Flex was so messed up from dirt and stuff that I replaced it with a one I bought at Ebay.
The changing did work well. But after setting the phone back up again, the charging speed now only allows 490mA which is really slow and takes forever to load! Biggest problem: I cannot use it as Nav and charge because of negative charging balance. I then bought another Charging Port from Ebay, thinking maybe the first one was broken. Unfortunately same problem occured after putting that one in. Only exactly 490mA.
The thing is, that those replacement pieces only have a serial number/code printed on. No MI logo or anything like the original one. Is it possible that these are low quality and cannot work properly?
How can I fix this issue? Is there a driver issue or anything with those replacement parts?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks a lot in advance!
best Regards
Same problem here... Anyone know where I can find a original replacement?
MegaMatze said:
Hi Guys,
I am happy owner of the MI8 right from the Beginning. I have always been a big fan of Xiaomi.
Now I had the problem, that my original USB C Charge Port Flex was so messed up from dirt and stuff that I replaced it with a one I bought at Ebay.
The changing did work well. But after setting the phone back up again, the charging speed now only allows 490mA which is really slow and takes forever to load! Biggest problem: I cannot use it as Nav and charge because of negative charging balance. I then bought another Charging Port from Ebay, thinking maybe the first one was broken. Unfortunately same problem occured after putting that one in. Only exactly 490mA.
The thing is, that those replacement pieces only have a serial number/code printed on. No MI logo or anything like the original one. Is it possible that these are low quality and cannot work properly?
How can I fix this issue? Is there a driver issue or anything with those replacement parts?
Thanks a lot in advance!
best Regards
Click to expand...
Click to collapse
I think it might be useful to flash in a custom kernel, it doesn't sound like a problem with your charger.
I also encountered the same problem as you in July last year. I solved it by re-flashing the MIUI official ROM in fastboot.you can try it
Hey, same problem here. Yesterday I changed the charger module. All looked good at the beginning but now I realize that it does not connect to Android Auto or to any computer and the charging speed is slow as well...
Did you manage to solve the problem? Did you try to reinstall?
Thanks!
Related
I have attached a photo of my AT&T Tilt. I recently dropped it and I want to know if I just need to replace the screen or if there is another issue. The phone works perfectly but the screen has weird colors and distortion. Also, this is the screen I was looking at purchasing to replace the damaged screen: http://cgi.ebay.com/New-LCD-Touch-S...c0.m14&_trkparms=65:16|66:2|39:1|293:2|294:50 .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not 100% sure, but I think it might have to do with the ribbon cable that goes to the screen.
Dave
I just had a similar problem. Dropped my work laptop right on my screen, corner first mind you haha...
I bought this http://cgi.ebay.com/US-LCD-Screen-D...trkparms=65:12|66:1|39:1|72:1234|293:2|294:25
and got it fixed no problem. Took about 2 hours of tearing it apart and reassembling to do.
The screen includes the cable so if that is the issue then you are still fine. The screen comes with the dissembler tool, and the security screwdrivers you will need.
See the Kaiser Wiki for full disassemble instructions that worked quite well for me.
bobtheamazing - can you let me know how is the quality of the new screen?
uzim289 if you bought yours - can you let me know how the quality of the screen is ?
and any personal advice if i decide to take mine apart. Thank you.
I took mine to Vegas, kept it in my pocket, it was sure hot and my screen cracked... need to replace but wasn't sure if i should spend $80 on a certain website of just go the route of ebay.
Before you buy another screen I would recommend taking the phone apart first and just checking to see if the connector is loose. How far of a drop was it and what kind of surface did it hit?
This site
http://www.fonlogix.us/att-tilt-lcd-screen.html
I got my replacement screen from here and it was the best decision. trust me. I replaced my screen about 4 months ago, and my Tilt is just fine.
I bought a replacement for my Kaiser at Marktplaats.nl but that's for the netherlands. Replaced the lcd according the video from Fonlogix. I uploaded the video allso a while ago to youtube which made it verry easy to replace and now it works like a charm again. You might whant to check THIS SITE for a replacement.
Good luck.
:Edit:
I just noticed Fonlogix is cheaper
I replaced my sons Tilt LCD been like 8 months now works perfect no issues!
Not that hard to replace the screen just have to keep a sharp eye out for the teeny tiny screws!
Anybody know where to get the 'teeny tiny' screws? As I was removing the job wheel assembly, the small silver-colored screw was stripped out. Funny, it was the correct screwdriver size and everything, and other screws came out fine.
Today I got from a big Pc store a generic charger which has two inputs car/home and two outputs usb 1000 mA and 500 mA.
Connected the IS and in all my years I've never seen something like that. Phone charges but touch screen is not responding while connected to that charger. Tried both outputs, different outlet in the house, even another charger with one usb at 500 mA. Only with that charger I bought today the problem exists. As soon as I disconnect it the screen works again..
Any ideas?
Sent from my HTC Incredible S using XDA App
try this, short the middle 2 contacts from it
like this
[----] <=- is usb [-__-] outer ones need to be clean
its pritty easy done by opening the case or modifying the cable, up to you what you want
Hawkysoft said:
try this, short the middle 2 contacts from it
like this
[----] <=- is usb [-__-] outer ones need to be clean
its pritty easy done by opening the case or modifying the cable, up to you what you want
Click to expand...
Click to collapse
yes thought of the data pins too but (I opened it) they're so tight soldered to the board that was difficult to do anything.. anyway.. I'll probably try to return it.
FYI all of you since these chargers are Chinese and pretty widespread look like that (nevermind the label)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dude original htc ones are like 10euro... buy that o.0 xD
Hawkysoft said:
dude original htc ones are like 10euro... buy that o.0 xD
Click to expand...
Click to collapse
u got a point.. I was looking for a AIO solution and gave 10 euro for this cr*p.. I'll check ebay..
it is happen with me when i use original HTC home charger, my incredible s is become slow and low touch response????
sometime it happen when i use original HTC home charger, but not every time.....
Her0o said:
it is happen with me when i use original HTC home charger, my incredible s is become slow and low touch response????
Click to expand...
Click to collapse
Happens a lot with me and any charger I use.
Hello!
I'm in need of a LED Flash Module for my Nexus One! Seems my son decided to play with it while I was asleep and somehow he broke the flash module. I cannot find any place listing this part as I have replaced the internal speaker and digitizer before and those parts were easy to find. It looks like the led flash module might be the same across several phones. If anyone can point me in the right direction of a supplier that carriers the flash module for the nexus one or one that is compatiable that would be great. I really need this asap as I use my phones camera and flash daily and without out the flash led I have to use my wifes phone....
So any ideas on where to aquire this part or even a broken phone I could take it out of
Thanks,
Nycro
Are any other phones flash modules the same "mytouch 3G slide" looks simlar in apperance from the back.
Sorry if I seem desperate but I love my Nexus One and do not want to replace it as I cannot find any phone that is comparable yet ... the G2x was close but with the screen not being up to par with what I want .... I really need to find a flash module led replacement asap it would make all the differance in me have to but my Nexus to rest :/
So anyone that has any idea whatsoever on where to find one or a phone I could get one out of please let me know
Thanks!
You mean like this part? lots of them on ebay...
http://cgi.ebay.com/OEM-Flex-Cable-Repair-Part-HTC-Google-Nexus-One-G7-G5-/310251340572?pt=PDA_Accessories&hash=item483c6bc31c
Well that is the part where the led flash would go but as you can see in the picture they have the camera module installed but not the flash module. I just need the LED that goes into the port next to the camera its a actual removable part that goes there. I will upload a picture from that auction with the module circled that needs the part and then a picture of the actual part.
Here is the module without the flash unit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here is the picture with the flash unit installed
All I need is the flash unit not the motherboard cable or the camera unit JUST the flash if anyone could find me a part number or a place where I could order it as that would be great! I know others are in need of this part as well... My son somehow got it turned on and it was on all night and it burned it out and melted the plastic lens on the actual battery cover...
Pictures sources :
First one is a ebay auction that was listed above
Second picture if from ifixit.com on there nexus one teardown.
I hope this makes it easier to know what I'm looking for! If anyone can find this part and needs one themselfs for helping me find it I would buy you one as well... Im desperate to get this fixed I use my flash on my phone on a daily basis and without it im at a loss here..... I know some company must have it due to all the other parts I see on ebay!
Thanks,
Dale
I'm about to receive my 4th HTC one:
#1 - lasted less than a week before I returned it. Wiggling a headphone plug in the headphone jack caused all kinds of weirdness. AT&T replaced it.
#2 - lasted about 6-7 months. Unplugged it one morning and it went totally dead. No charge light would come on when plugged in. AT&T replaced it.
#3 - lasted less than one month. Pulled it out of my pocket while (ironically) in an AT&T store and it was a brick like #2. 5 minutes before it was working. It was charged that morning using the original HTC adapter & cable. AT&T is mailing a replacement (#4).
All had bootloader unlocked. #2 was also SIM unlocked and S-OFF. All were running (different) custom ROMs. All were in cases and had no physical or water damage (not even scratches).
Any idea what could cause this hard brick where the charge indicator doesn't even come on? Any ideas to rescue it?
Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTCONE using Tapatalk
What you need is a sacrifice. You should bathe yout phone in virgins blood than let it dry for three days and three nights. Finally you must say 20 times loudly "this phone is not gonna break without reason", while doing a ritual dance. Hope it helps
Yeah. How helpfull... Please tell me how an S-on device can be bricked when everything is stable. This didn't happen after a ROM flash or any similar activity. Phone goes from just fine to dead without any specific action.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Stop messing with your phone. You clearly have no idea what you're doing.
Sent from my HTC One using Tapatalk
rootshot said:
Any idea what could cause this hard brick where the charge indicator doesn't even come on? Any ideas to rescue it?
Click to expand...
Click to collapse
Really strange problem. Some ideas:
- Was it always the same adapter/cable or was that one replaced, too? If it was the same, maybe it is somehow broken and eventually kills your phones.
- If you use custom ROMs, did you maybe changed some low level settings (voltage? CPU frequencies?)
Cheers, Curly060 =;->
Curly060 - same adapter, but I use other adapters and cables as well (office, car, etc.). Custom rom was Maximus 30.0. No under/over clocking or volting.
My guess is that one of my power adapters is out of spec. I use a non-HTC adapter where it generally charges overnight.
I'll replace them all.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
rootshot said:
I use a non-HTC adapter where it generally charges overnight.
Click to expand...
Click to collapse
I think you just answered your own question!
rootshot said:
I'll replace them all.
Click to expand...
Click to collapse
Maybe you should go for original ac adapters this time...
Correct me if I'm wrong.
Well, looks like I was on the right track then.
Yes, please replace them and see if that helps!
Cheers, Curly060 =;->
Hello people,
My battery would only last for about 8 hours after using quickcharge way too many times.
So I went online, bought me a new battery from Nohon and it finally got delivered yesterday.
All went fine until I came to the part where I had to remove the old battery.
It was firmly glued to phone and I had to apply some force (very gently) and while doing that, the battery caught fire. (It looked like a little firecracker).
The battery wasn't even connected anymore at that time. by the way.
Luckily, the phone didn't show too much damage, so I connected the new battery.
The good news is that it seems to be working except for the screen. About 10% of the screen (at the bottom) seems to be working and is responding when pushing on it, although there is some backlight problem. The other 90% of the screen is black and doesn't respond at all.
Do you think that the whole screen needs replacing or that the cables under the battery (they look a little damaged) could cause this?
Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It happened to me too. The melted circuits can not be restored. I purchased a used mi5 (paid € 80)
Inviato dal mio MI 5 utilizzando Tapatalk
It seems to be a screen issue only, because the phone boots up and I am able to copy files over to my pc. So I don't think that all the circuits are destroyed.
Please help me get fast charging back. Like 3 months back, my phone suddenly stopped charging fast and since then its charging super slow. Like if I use it while charging it actually discharge. While switched off it takes 4+ hrs to fully charge.
I have replaced battery, usb assembly, charger, cable everything but to no avail. Now I think its a software issue. Maybe some kernel, firmware I screwed. I have tried Syberia, Xiaomi EU, Rev OS roms as well.
Ampere app never goes beyond 300 mah reading, whatever charge cable combination I try. Please throw if insights.
Thanks a lot
shashanksinghal said:
Please help me get fast charging back. Like 3 months back, my phone suddenly stopped charging fast and since then its charging super slow. Like if I use it while charging it actually discharge. While switched off it takes 4+ hrs to fully charge.
I have replaced battery, usb assembly, charger, cable everything but to no avail. Now I think its a software issue. Maybe some kernel, firmware I screwed. I have tried Syberia, Xiaomi EU, Rev OS roms as well.
Ampere app never goes beyond 300 mah reading, whatever charge cable combination I try. Please throw if insights.
Thanks a lot
Click to expand...
Click to collapse
You should open your own topic because it has nothing to do with my problem