Related
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
I think there is not solution for this problem. We have to wait. (I have the same problem but in Al00 running Al19 rom)
How do you check for FRP lock on a Huawei phone just curious.
ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
kyle_2103 said:
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
Click to expand...
Click to collapse
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
ChaseRxx said:
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
Click to expand...
Click to collapse
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
I've tried some command in fastboot mode but there's always an error: Remote: command not allowed.
I can't do anything with fastboot mode
1. Try to force update with Power Button + Min Vol Button + Max Vol Button, liked you said this isn't working try to do the button combination with the phone connect it to the PC; in my case some times dload din't works after I connected the phone to the computer.
2. Other thing, something happend if you turn of the phone and leave Max Vol Button pressed, you should be entering to eRecovery.
3. Remember that sometimes enter in eRecovery mode requires to the phone be turn off otherwise you can't access to Recovery. So if this is the case follow bullet #2 and them #1.
PD: OFC I'm assuming you already have the dload folder with an compatible version of stock ROM on your SDCARD. If you don't have any version tries this one: https://forum.xda-developers.com/p9...dload-file-p9-eva-l09-b136-t3382818?nocache=1
Hope I helped you, I already bricked twice my P9 corrupting System Table Partitions.
Jeremy Molina.
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
If you did the change of Unlock OEM before the bricked in an previous authorized computer you will still have rights for, otherwise new Android Security features is going to rejected the request.
Exacly
Dload/ no network
ChaseRxx said:
Exacly
Click to expand...
Click to collapse
Hi guys! Im new sorry if posted in wrong place/topic, I did dload method as here https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818 to debrand my L09 Vodafone to stock software and now I end up in EVA-C900B136 and my sim card/network is not working anymmore I had download the software package is in the above post and did force flash.
Many thanks for help!!!
kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
dondrog said:
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
Click to expand...
Click to collapse
fastboot oem unlock (followed by bootloader code)
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello gays i install nougat 7
install with TWRP after install my phone is no keybord no all problems and i can`t active oem waht i do all command
remote not allowed coomand and i try to install all veriosn but still problem please help me
i install
EVA-L19C432B322-update
and my phone 6369C-EVA L19
my mistake please help me
i try to swoftware sim but swoftware failed
--
incompatibility with current version please download the correct update package
i upload vedio on youtube see please https://www.youtube.com/watch?v=V2yH...ature=youtu.be
sry for my bad engilsh
Any help would be greatly appreciated
I have a P9 L09, i have unlocked the bootloader, flashed TWRP recovery, and started flashing some roms. I have succesfully flashed a cyanogenmod, and it booted properly, but when it started it asked me for a password which i did not know, so i google searched and found out that it is a common issue and i need to wipe data from recovery. I tryed that but it did not work it says failed, and nothing works in the wipe advanced section, beside system. And also in the custom recovery it says that the internal storage has 0MB ! I was able to put other custom roms on the SDcard and flash them, they booted but every single one asks for the password.. I then tryed to install stock rom with the dload method, but it crashes and 40% , and i tryied the System Recovery option in HiSuite and it says it is not compatible with my device. Any help would be greatly appreciated! Thank you!
kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello. I have the same problem. I have my unlock code but in fastboot, adb command says it failed. Sorry for bad english. What can i do?
FAILED: REMOTE COMMAND NOT ALLOWED FINISHED.
Same problem on my honor &x locked bootloader and bricked. unlocking the oem like you said above does not work
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
I have exactly the same issue. With identical error codes. Still trying to work out a solution.
on the Huawei website, the had a bootloader.img installer for older models but none for the p10/ p10 plus
Any advice would be appreciated
Let phone completely discharge even it power off automatically. Then put the phone on the charging it will boot up to system then go to settings >advanced settings>back up&reset> reset all settings
when it boot i cant see anything except black . i can only turn off or volume.
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Blackball said:
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Click to expand...
Click to collapse
it doenst work , i tried all combination. it always go to error when i tried. is it possible that some flash box could fix?
I never heard that someone killed his fastboot. Press longer the vol -
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
rosarioglen18 said:
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
Click to expand...
Click to collapse
sadly , i havent found any solution yet. sorry . i also wish to fix it
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
DallasCZ said:
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
Click to expand...
Click to collapse
thank you ,unfortunately it not possible to go to fastboot mode, when the phone on error state. pc also not detect. i apreciate the help.
1-the second link i posted is about to flash service stock firmware trough force update (vol+,vol-,power). have you tried?
2-what the phone does when you try to start the fastboot mode (connect with pc, turn phone off, turn phone on with vol- and power)?
3-what is your model number L09CxxxBxxx?
I have sam problem last 3 days and i cannot solwed
solution
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
p10 no recovery
franmasco said:
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
Click to expand...
Click to collapse
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
---------- Post added at 10:21 AM ---------- Previous post was at 10:09 AM ----------
fresigi said:
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
Click to expand...
Click to collapse
ps,,the model and VTR-L09 EUROPE, IF USE DLOAD, IS 5% BLOCK
p10 no recovery
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.[/QUOTE]
fresigi said:
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
[/QUOTE]
Hi, I was having the same problem. Mate 8 EMUI 8.
After looking everywhere and trying all the options available, I wasnt able to resolve.
Finally, I tried FunkyHuawei and got my system back through eRecovery.
Gave them the readings like version no. , build no...etc through fastboot. The required info is on their site. They then reverted with a link of the firmware which I flashed through their FuHunbrick tool. It force updates the entire full last version.
After flashing and booting, the system didnt boot but was able to go to eRecovery and restored my previous version.
If you or anyone else stuck at this error, they can try at their own risk as they dont guarantee anything.
Edit: you should and will be able to boot into fastboot once the battery is totally down and phone shuts off completely. Just press volume down button and insert usb. Try again and again if it doesnt work first time.
Thanks.
Help
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
elchino!!! said:
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
Click to expand...
Click to collapse
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
apat26 said:
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
Click to expand...
Click to collapse
Hi. I did the battery part and the part of the pressing the vol - is and connecting to pc. It started but didn't got into fastboot or bootloader, just turned on normally and then I ran the adb command "adb reboot recovery" and I had to do the battery part again. I am afraid to run "adb reboot bootloader" because the risks of the draining out the battery. I mean my phone does not enter into recovery.
Hello,
Yesterday I've decided that the Stock ROM was just an actual mess and decided to install a Custom one.
I have "experience" as I've done it in the past with Nexus, Sony, Motorola. But is the first time I come back to this stuff after some time, so I didn't follow all the events.
Said so I've basically unlocked the bootloader, following the usual steps and everything went well apparently.
The FRP was already red, and as well the Unlock bootloader from green became red.
I've rebooted the phone and I was "welcomed" by the "Your device has been unlocked and can't be trusted".
The phone rebooted and everything was deleted? lost all applications and the GAPPS are missing plus all the Huawei one.
Even weirder The keyboard never Pops-out, meaning I can't literally do anything. I tried all the following then:
Ok no panic...let's enable the Developer Option. Clicked 100 times on Build Number and nothing happens...
I was able to fastboot the phone and apparently flash the TWRP, as no error was raised, but I'm trying in every way to boot into recovery to install a custom ROM and it just doesn't. I always end up on that panel "Your device has been unlocked and can't be trusted".
From here I tried to go back into the Huawei recover interface ( Power button + UP/DOWN) and chose to recover the original Software, but of course it fails.
Ok... an other idea. A simple factory reset? Well it asks me for the PIN and I can't type anything due to the missing keyboard
I typed one of those special codes and chose factory reset. It says I can't do it because of lock screen which is activated. To remove it...I need to input the PIN
tried to fastboot boot twrp.img and no luck
installed FLashify but doesn't allow me to click anything
Kingo root fails at 90%
Offical TWRP download the twrp.img from somewhere but I don't get any option to search the .img path and load it, or whatever the app should help you to do
I am out of idea and with a Macbook available.
Cheers!
You could search for a keyboard on Play Store with your voice. If you don't have a microphone symbol in Play Store search bar, try flashing a bigger Gapps.zip which probably would include Google Voice Recognition.
EDIT: If you still can't manage it, flash the stock erecovery.img to your recovery partition, then do a restore from there. It will download stock firmware and format your data.
marstonpear said:
You could search for a keyboard on Play Store with your voice. If you don't have a microphone symbol in Play Store search bar, try flashing a bigger Gapps.zip which probably would include Google Voice Recognition.
EDIT: If you still can't manage it, flash the stock erecovery.img to your recovery partition, then do a restore from there. It will download stock firmware and format your data.
Click to expand...
Click to collapse
I'm in the same situation. After a lot of attempts I found a keyboard, fleksy(an horrible keyboard) but when finally i tried to make factory reset it hasn't work. I have no idea how fix this situation.
marco.riggio said:
I'm in the same situation. After a lot of attempts I found a keyboard, fleksy(an horrible keyboard) but when finally i tried to make factory reset it hasn't work. I have no idea how fix this situation.
Click to expand...
Click to collapse
eRecovery didn't work ?
dz3ro said:
eRecovery didn't work ?
Click to expand...
Click to collapse
Every time I tried to reset with eRecovery it's failed
Hi
In case someone still searching for solution, had the same problem, you need to relock bootloader using "fastboot oem relock #unlockId" then enable oem unlock from developer's options, unlock again in fastboot and you're good !
With HI SUITE
Hi
Install Keyboard APK (swiftkey for example) with HiSuite (http:/ /consumer.huawei.com/minisite/HiSuite_en/)
Unlock the bootloader again.
I already happened to have PHONE Unlocked and the bootloader is locked.
Go to bootloader and use the command (fastboot oem device-info) and you will have the bootloader information.
On Saturday appeared an OTA update to do on my mi A2 but after installed and restarting it died. It does not enter recovery mode and the screen is always on with android one bootscreen logo.
PS: I never flash the phone and i never change anyting in the system of the phone.
The only response that i have in the phone is enter in it Fastboot menu. I read some threads and untill now i cant fix my phone.
I will try to explain what i do:
I've tried using this tool https://forum.xda-developers.com/mi-a2/how-to/mi-a2-toolkit-unlock-bootloader-root-t3834585.
I try option 3 (Unbrick/Revert to Stock/Force update and the program tell me to unlock the bootloader.
When i tried to unlock bootloader by option 1 and then 1, 2 and 3 ( Unlock flashing critical, unlock OEM , unlock flashing ) the programs says: Failed Unlock is not allowed.
Then i try the response 9 to this thread https://forum.xda-developers.com/mi-a2/help/impossible-flashing-xiaomi-mi-a2-t3837565 to try unlocked the bootloader
But i have the same response ( Flashing Unlock is not allowed )
I read and i try but i cant unbrick my phone, someone can help?? Thanks
We are in the same boat buddy, the same thing happened to the phone of my wife.
It *sounds* like the update failed, and normally that would mean it would switch the slot back to the one that was working and boot that.
But you've tried a bunch of options from some tool, I've no idea what it did, as the tool doesn't tell you what commands it's doing.
I'd suggest to go to fastboot and see if you can tell which slot is active, then switch it to the other slot, then do fastboot reboot and cross your fingers
I have the same problem (for other reasons, but exactly the same problem). You can also try "fastboot oem edl", but it did not work for me, so I suppose you have little chance for it to work.
I have been searching and it looks like there are some "deep flash cables" that can make the phone enter edl mode to flash it using mi flash tool. Maybe these could work for us. There is apparently other way to enter edl mode, but it requires opening the phone (that I do not want to do) to short two test points.
I cant enter revorymode only fastboot mode. But when in fastbootmode my connected pc cant even find the phone. Im going to return the phone.
I have the same problem, I have this edl cable but so far no luck.
Do not realy k Ow how to use.
Are you sure it was the OTA update that bricked your phone? That Treble system isn't just there for the kicks, its there to prevent serious issues like these.
I'm stucked on fastboot, I don't want to open my phone. Could anyone help us? I already tried a lot of things, my computer doesn't recognize my mobile when is on fastboot mode. I already tried to install a lot of drivers or try to use differents adbs.
Hello guys first of all Sorry for my bad english i will try my best, i bought Huawei p9 for cheap used on the market, phone has a brick problem but i have tryed almost everything: I will provide photos in this post and give all details. So phone cant boot up it says your device has been unlocked and can't be trusted so it bootlops if u dont hold volume Up, if you do u enter Huawei eRecovery where u can navigate with + - volume buttons basically u know it, so i enter " Download latest version and recovery " but there i cant select my wifi Nvaigation commands work but u cant select any wifi so u can only shutdown or reboot. So that is the part one, part two: Fastboot mode works Volume - + usb and u are in fastboot Phone is Unlocked and FRP unlock, i have installed JDK ( java ) + platform + i have installed ADB&fastboot drivers, problem is even with the drivers my device is recognised HI3650 then i have to manualy go in device menager and change it to Android ADB interface, So now im in powershell tyring some commands and some work some no i dont know why, I cant factory reset i cant Wipe ( or erase anything ) im getting adb failed command not allowed, But i can Fastboot flash recovery ( any img ) but noting happens when you flash it even the twrp. So now we are in part 3: Ok so i have found a way to force update device with SD card + and - hold and power button but my phone stucks and Huawei logo and cant do anything.
Down are the pictures of everything any help or idea thanks a lot.
Have you tried to make it work with old firmware? Rllback or anything? If yes and it doesnt work then
Dc phoenix is your friend. 15 euros it will cost you