Database Develop

boot problems after automatic update (Mi Note Pro)

Hi,
I got the message to reboot my note pro after receiving automatic update (Dev-Rom).
After installing and rebooting the note pro hang. I get only the Mi-Logo.
I rebooted again and again...nothing.
What can I do?
Thank you all
Greetings,
Kuddel

Are you using the stock recovery

Yes
Yes
skw5115 said:
Are you using the stock recovery
Click to expand...
Click to collapse

Download the latest stable rom and flash via adb..
Sent from my MI NOTE Pro using Tapatalk

Are u using the Chinese Developer ROM?
Each weekly Update will make you stuck in a boot-loop!
If you can't boot into your ROM anymore, flash the full ROM:
Download latest Xiaomi Mi Note Pro Latest Developer Version Fastboot File Download here
Unzip the Downloaded ROM file
Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a micro USB cable
Download the Download MIUI ROM Flashing Tool from here here and install / extract it
Run the Flashing Tool
Select the extracted ROM folder
Click flash
If You want to do the weekly developer update without bootloop:
Disable Automatic Upgrades if you're on the Chinese Developer ROM
Download the full Chinese Developer ROM from here
Copy it to your device
Open the updater app
Click the menu button.
Select the menu option that says select update ZIP manually
Choose the downloaded full ROM ZIP
It reboots into recovery and automatically flashes the full ROM without producing boot loops
Be patient, it needs a long time, don't interrupt the process!

kuddelkuddel said:
Hi,
I got the message to reboot my note pro after receiving automatic update (Dev-Rom).
After installing and rebooting the note pro hang. I get only the Mi-Logo.
I rebooted again and again...nothing.
What can I do?
Thank you all
Greetings,
Kuddel
Click to expand...
Click to collapse
I Always download full custom rom 600mb++ and flash via updater, always no issue hehe, even with twrp or stock recovery also can

I'm currently a Beta tester for the chineese rom so I get updates 2-3 times a week and I'm always a couple updates in front and I have never ended up in a bootloop from usiing automatic updating

What is the way to update, via installer?
Hi Kahun
Thannk you for your comment. Whitch method do you use for the updates?
Do you use the updater-app or do you go inside the system of MIUI?
The last one give problems by my phone..
Greetings,
Kuddel
Kahun said:
I'm currently a Beta tester for the chineese rom so I get updates 2-3 times a week and I'm always a couple updates in front and I have never ended up in a bootloop from usiing automatic updating
Click to expand...
Click to collapse

I just use updater with stock recovery. Whever I need to use twrp I just boot temporarly into it.

Can someone upload the .tgz file for brick fix miui server not working
Sent from my Nexus 6 using Tapatalk

Guys do you think inbuild custom ROM provided by xiaomi are not good enough, why going for developed ROM version tat does not support OTA directly from Xiaomi.

K20 pro won't update with installed orange fox recovery

Hi guys, i have problem with updating my k20 pro,
I have unlocked device with official mi 9t pro rom installed(10.3.3.0 PFKEUXM) and orange fox recovery, i got notification that there is uptade available (10.3.4.0), i have tried to update the device, i have downloaded update and chose reboot and update, device just booted in orange fox recovery, and i have rebooted phone from orange fox and i am still on 10.3.3 and still have notification for update, can anyone help me to update the phone, i really can't risk to brick the device, because i am not at my home and i have no PC to unbrick,
Sorry for bad English, thanks in advance

I can't even install that recovery and i tried many times last night . Can you tell me how you did it?

you can try with this version Twrp i succesfully updated ota previously with it.
https://forum.xda-developers.com/k20-pro/development/recovery-unofficial-twrp-xiaomi-redmi-t3944363
I just tried and it doesnt work but you can go into orangefox recovery browse for donloaded rom folder and manually flash it from there thats where it is stored. I had to remove the compatibility zip file also and if your decrypted flash disable encryption file.

ergysramaj said:
I can't even install that recovery and i tried many times last night . Can you tell me how you did it?
Click to expand...
Click to collapse
You need to install orange fox recovery via PC, in fastboot, when you finish that you need to Move zip file of orange fox recovery and flash it via phone in orange fox recovery that you installed via pc, then you need to format data and then reboot phone, i recommend backing up the phone before all this.
Here is the link that i followed to install http://www.tothemobile.com/orange-fox-recovery-redmi-k20-pro

Đoie said:
Hi guys, i have problem with updating my k20 pro,
I have unlocked device with official mi 9t pro rom installed(10.3.3.0 PFKEUXM) and orange fox recovery, i got notification that there is uptade available (10.3.4.0), i have tried to update the device, i have downloaded update and chose reboot and update, device just booted in orange fox recovery, and i have rebooted phone from orange fox and i am still on 10.3.3 and still have notification for update, can anyone help me to update the phone, i really can't risk to brick the device, because i am not at my home and i have no PC to unbrick,
Sorry for bad English, thanks in advance
Click to expand...
Click to collapse
Enable miui update from orangefox settings.

Am NoobMaster69 said:
Enable miui update from orangefox settings.
Click to expand...
Click to collapse
Since i had the same problem: Enabling MIUI Update in OrangeFox settings is not enough. Before OTA updates via OrangeFox work, a full MIUI ROM must be flashed via OrangeFox. On my Mi 9T Pro, there even was an according note on the MIUI OTA settings page.
So i took the full 10.3.4 EEA Rom from https://bigota.d.miui.com/V10.3.4.0...EAGlobal_V10.3.4.0.PFKEUXM_964826982c_9.0.zip and dirty flashed it with OrangeFox. The OrangeFox MIUI OTA settings page now tells me "You are ready to receive updates". We'll see about that when the next OTA update arrives...

Đoie said:
Hi guys, i have problem with updating my k20 pro,
I have unlocked device with official mi 9t pro rom installed(10.3.3.0 PFKEUXM) and orange fox recovery, i got notification that there is uptade available (10.3.4.0), i have tried to update the device, i have downloaded update and chose reboot and update, device just booted in orange fox recovery, and i have rebooted phone from orange fox and i am still on 10.3.3 and still have notification for update, can anyone help me to update the phone, i really can't risk to brick the device, because i am not at my home and i have no PC to unbrick,
Sorry for bad English, thanks in advance
Click to expand...
Click to collapse
Did you prepare the orangefox recovery for OTA updates?, Because you need to do that by checking in its settings and the flash a recovery ROM so that the recovery creates an OTA_BAK folder to survive OTA
Sent from my Redmi K20 Pro using Tapatalk
---------- Post added at 08:01 PM ---------- Previous post was at 07:57 PM ----------
Check out my post https://forum.xda-developers.com/k20-pro/how-to/flashing-orangefox-recovery-mi-9t-pro-t3980579
Sent from my Redmi K20 Pro using Tapatalk

Am NoobMaster69 said:
Enable miui update from orangefox settings.
Click to expand...
Click to collapse
I managed to update the system that way, but when i went to enable miui update it was already enabled, but i had to download full rom(2,2gb) instead of just patch(about 400mb)

Đoie said:
Hi guys, i have problem with updating my k20 pro,
I have unlocked device with official mi 9t pro rom installed(10.3.3.0 PFKEUXM) and orange fox recovery, i got notification that there is uptade available (10.3.4.0), i have tried to update the device, i have downloaded update and chose reboot and update, device just booted in orange fox recovery, and i have rebooted phone from orange fox and i am still on 10.3.3 and still have notification for update, can anyone help me to update the phone, i really can't risk to brick the device, because i am not at my home and i have no PC to unbrick,
Sorry for bad English, thanks in advance
Click to expand...
Click to collapse
Dude, the first thing you need to do "mi flash" application on the computer by opening the Global Rom file "Clean All" or "Flash All" (options may be different depending on the program version) option to the device with fastboot mode. So you'il have a clean device and everything will be reset. Then set up TWRP with Android 9.0 and 10 support, which works flawlessly on the K20 pro and Mi 9t pro models "TWRP 3.3.1-15 Unofficial by mauronofrio". Then upload the Magisk zip file immediately when you log in to the TWRP screen. After you do this, you can install any Custom Rom file. Or you could have a Global ROM loaded with TWRP.

Đoie said:
I managed to update the system that way, but when i went to enable miui update it was already enabled, but i had to download full rom(2,2gb) instead of just patch(about 400mb)
Click to expand...
Click to collapse
You can normally use miui ota from system settings , by enabling miui update from orangefox settings. Just need to re-flash magisk later.

How to update without losing TWRP and root?

Hello, I have a Mi 9T Pro with 10.3.3, TWRP and Magisk. I received the update to 10.4.0. As stated in the title, how could I update the system without losing the TWRP and root through Magisk? Thank you in advance

MagikGab said:
Hello, I have a Mi 9T Pro with 10.3.3, TWRP and Magisk. I received the update to 10.4.0. As stated in the title, how could I update the system without losing the TWRP and root through Magisk? Thank you in advance
Click to expand...
Click to collapse
You can't. The best way to update is to download the 10.4.0 recovery ROM, then flash that in TWRP. This will still overwrite Magisk, so you will need to install that again straight after installing the update. If you don't install Magisk immediately, then booting into system would also restore stock recovery, so it needs to be done before you reboot to system.

Robbo.5000 said:
You can't. The best way to update is to download the 10.4.0 recovery ROM, then flash that in TWRP. This will still overwrite Magisk, so you will need to install that again straight after installing the update. If you don't install Magisk immediately, then booting into system would also restore stock recovery, so it needs to be done before you reboot to system.
Click to expand...
Click to collapse
Many thanks! In this way I could at least save the TWRP! Should I have to take some other precautions? Like deactivate all Magisk modules, perform a backup of apps ecc?

i have the same question too..

MagikGab said:
Many thanks! In this way I could at least save the TWRP! Should I have to take some other precautions? Like deactivate all Magisk modules, perform a backup of apps ecc?
Click to expand...
Click to collapse
No, you can simply flash the ROM and right after that, flash Magisk. This way you won't loose twrp or Magisk.

MagikGab said:
Many thanks! In this way I could at least save the TWRP! Should I have to take some other precautions? Like deactivate all Magisk modules, perform a backup of apps ecc?
Click to expand...
Click to collapse
P12AV33N said:
No, you can simply flash the ROM and right after that, flash Magisk. This way you won't loose twrp or Magisk.
Click to expand...
Click to collapse
I would just add to this that, although this is all that is required, I would still backup things, just in case.
It's always good practice when flashing things to backup what you can, even when it's not needed should things go smoothly. It only takes an absent minded moment of stupidity in TWRP to do some serious damage. As many people, myself included, can vouch for.

Thank you everyone!

I've read a lot about this, some say it's better with fastboot rom and Miflash, but twrp method with recovery seems to be easier method.
Can anybody confirm is it necessary to remove compatibility.zip file from flashable zip file before flashing?
Clean flash or dirty should work for 10.3.4.0 update?
I'm using 9T Pro (EU), rooted, stock 10.3.3.0, TWRP 3.3.1-15

macanovic88 said:
I've read a lot about this, some say it's better with fastboot rom and Miflash, but twrp method with recovery seems to be easier method.
Can anybody confirm is it necessary to remove compatibility.zip file from flashable zip file before flashing?
Clean flash or dirty should work for 10.3.4.0 update?
I'm using 9T Pro (EU), rooted, stock 10.3.3.0, TWRP 3.3.1-15
Click to expand...
Click to collapse
Flashing a minor update is fine to do as a dirty flash in TWRP.
Doing a major update is 50/50 (going from 10.3.x to 10.4.x as it's s change from Android 9 to 10, or going from 10.x.x to 11.x.x). You may be fine, you may have issues. It might be a better option to try using the 'save data' option in the Mi Flash Tool, which is the same as a dirty flash, but will still update vendor and firmware files, should they have changed between the versions.
You might be guided by what the OTA would do. Occasionally when an OTA provides a major version change, it will perform a clean flash and give you big warnings that this will happen first. If an OTA tells you this will happen, then I would definitely use the Mi Flash Tool and use the 'clean all' option.
As for the compatibility zip, it depends on the TWRP you are using. Just try as is first and if your get an error about the wrong device, then remove it and try again.

Thanks a lot, your answers are very helpful in this thread! ?

I got the OTA update to 10.3.4.0 on my Mi 9T Pro, too, but it wouldn't install via TWRP (mauronofrios version 3.3.1-15). I also tried to flash the full 10.3.4.0 ROM (https://bigota.d.miui.com/V10.3.4.0...EAGlobal_V10.3.4.0.PFKEUXM_964826982c_9.0.zip) with TWRP, but that didn't work either, not even after removing compatibility.zip.
I then changed my TWRP to OrangeFox Recovery 10.0_7 stable (via fastboot) and dirty flashed the full ROM via OrangeFox. That worked flawlessly, it even seems that it will be able to install future OTA updates, but that remains to be seen when the next OTA update arrives.

cgdams said:
I got the OTA update to 10.3.4.0 on my Mi 9T Pro, too, but it wouldn't install via TWRP (mauronofrios version 3.3.1-15). I also tried to flash the full 10.3.4.0 ROM (https://bigota.d.miui.com/V10.3.4.0...EAGlobal_V10.3.4.0.PFKEUXM_964826982c_9.0.zip) with TWRP, but that didn't work either, not even after removing compatibility.zip.
I then changed my TWRP to OrangeFox Recovery 10.0_7 stable (via fastboot) and dirty flashed the full ROM via OrangeFox. That worked flawlessly, it even seems that it will be able to install future OTA updates, but that remains to be seen when the next OTA update arrives.
Click to expand...
Click to collapse
You need to confirm if orangefox is actually ready for OTA by checking in its settings.
Sent from my Redmi K20 Pro using Tapatalk

Working TWRP for Mi9T Pro on Android 10 (QFKEUXM) **SOLVED**

Now that we have finally got the update in the EU region I want to know if anyone has successfully flashed TWRP or any other recovery?
In case anyone wondering I have managed to get root with the latest magisk via patched boot image method.
**UPDATE**
I flashed the latest TWRP from this thread and all went smoothly. Also managed to get Viper4android working which was my biggest concern coming from Android 9. Happy days :victory:

_ray_ said:
Now that we have finally got the update in the EU region I want to know if anyone has successfully flashed TWRP or any other recovery?
In case anyone wondering I have managed to get root with the latest magisk via patched boot image method.
Click to expand...
Click to collapse
I'm currently on MIUI 10.3.4.0 Stable with OrangeFox Recovery installed, Going to attempt updating later since, afaik, OrangeFox has Support for OTA Updates.

Fatal_Scythe said:
I'm currently on MIUI 10.3.4.0 Stable with OrangeFox Recovery installed, Going to attempt updating later since, afaik, OrangeFox has Support for OTA Updates.
Click to expand...
Click to collapse
Good luck and please do post back the results :good:

Fatal_Scythe said:
I'm currently on MIUI 10.3.4.0 Stable with OrangeFox Recovery installed, Going to attempt updating later since, afaik, OrangeFox has Support for OTA Updates.
Click to expand...
Click to collapse
Waiting for your feedback, because my orangefox is ready for OTAs but i think because i forgot to check DM VERITY and FORCED ENCRYPTION it asks for password when rebooting for update and ruins it...this is my guess. So please share your feedback and it you checked the 2 options unlike me.
Sent from my Redmi K20 Pro using Tapatalk

I'm also interested in this. I want to keep TWRP and magisk post-upgrade to Android 10

I updated with no issued with the following steps:
1. Installed latest TWRP from here https://forum.xda-developers.com/k20-pro/development/recovery-unofficial-twrp-xiaomi-redmi-t3944363
2. Download latest Magsik
3. Download recovery zip for miui 11 rom
4. Reboot to recovery
5. Install rom zip ( do not reboot after install)
6. Install Magsik
7. Install TWRP img via recovery that you downloaded in step 1
8. Reboot into TWRP
9. Reboot to system

_ray_ said:
Good luck and please do post back the results :good:
Click to expand...
Click to collapse
ishaqtkr said:
Waiting for your feedback, because my orangefox is ready for OTAs but i think because i forgot to check DM VERITY and FORCED ENCRYPTION it asks for password when rebooting for update and ruins it...this is my guess. So please share your feedback and it you checked the 2 options unlike me.
Click to expand...
Click to collapse
Okay so, coming from 10.3.4.0 Stable, OFox Recovery and encrypted, the update ran through fine without any problems. Since I'm encrypted I had to enter my password first but after that it started installing the Update. as far as I remember, I've seen that Orangefox's script that prevents Orangefox from being overwritten after every update (it's called OTA.bak I think) already handles both DM-Verity and Force-Encrypt on it's own, at least I didn't had to take any further steps regarding Encryption and such stuff and after updating it booted into MIUI 11 just fine (which ofc since it's an Major Update took a little longer than usual but at least it eventually did)

desiresiscool said:
I updated with no issued with the following steps:
1. Installed latest TWRP from here https://forum.xda-developers.com/k20-pro/development/recovery-unofficial-twrp-xiaomi-redmi-t3944363
2. Download latest Magsik
3. Download recovery zip for miui 11 rom
4. Reboot to recovery
5. Install rom zip ( do not reboot after install)
6. Install Magsik
7. Install TWRP img via recovery that you downloaded in step 1
8. Reboot into TWRP
9. Reboot to system
Click to expand...
Click to collapse
So what do you do when you're on 10.3.4 pfkeuxm Rom and running with twrp and magisk installed?
Can't I install the miui 11 rom via twrp and then immediately flash magisk again?

Following the advice here, I've got the update installed with twrp and magisk working fine. The only problem I have is that I can't read/write the system partition so titanium backup isn't working. Any ideas how I could fix it?

9T Pro Global booting to Fastboot after Viper4Android Uninstall...Please Help!!!

Hey all.
Currently running 11.0.1.0 Global Official on my phone. Installed via OrangeFox Incremental update method.
I had some Magusk modules installed before the update. All of them worked after except Viper4Android. So I decided to uninstall.
I selected reboot via Magisk and now the phone constantly goes to Fastboot!!
I manually booted into recovery and decided to wipe Dalvik and Cache. During this process it shows 'NO ROM' under 'Device: Raphael'
I don't know how on earth this happened and can't seem to re-install the rom as it gives me following error:
Detected MIUI Update Package
Support MIUI Incremental Package Status: Enabled
E3003: Can't install this package over newer build.
Update process ended with ERROR: 7
Are you installing onto the correct device?
Guys please help. I really don't want to do a clean install as I have lots os important sms that I haven't backed up.
Please help

Error 7 is because you're probably flashing another region ROM. Unzip the rom and find the Update script file, edit with notepad and rename all lines reading "Raphael" to "Raphaelin" or bice versa. Rezip and flash.
Sent from my Redmi K20 Pro using Tapatalk

ishaqtkr said:
Error 7 is because you're probably flashing another region ROM. Unzip the rom and find the Update script file, edit with notepad and rename all lines reading "Raphael" to "Raphaelin" or bice versa. Rezip and flash.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Hey. Thanks for the reply. However this is the same file I used to upgrade from 10 to 11 in the first place.
Also this is the full ROM I believe as I do not see any update script inside the zip.
This is the one I downloaded: https://bigota.d.miui.com/V11.0.1.0.QFKMIXM/miui_RAPHAELGlobal_V11.0.1.0.QFKMIXM_7b25321468_10.0.zip

There should be update script file. Otherwise you'll have to flash a fastboot ROM with miflash and in there maybe try to KEEP DATA and see if it boots
Sent from my Redmi K20 Pro using Tapatalk

ishaqtkr said:
There should be update script file. Otherwise you'll have to flash a fastboot ROM with miflash and in there maybe try to KEEP DATA and see if it boots
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Hey again. So I decided to go the fastboot ROM route with keep data option. My data partition was left intact (THANK YOU!) however my sms and call logs were only restored from the latest cloud backup available (not latest unfortunately).
Thanks again for your help.
Just wanted to check with you. Can I install OrangeFox directly onto this phone now? I recall having issues the first time I tried. Ended up having to install a specific version of TWRP made for the 9T Pro Global version and then install OrangeFox via that.

You'll have to format data i think. Otherwise try, this is the latest for raphael https://files.orangefox.tech/OrangeFox-Stable/raphael/OrangeFox-R10.0_8-Stable-raphael.zip
Unzip the file, then take the recovery.img file from it and FASTBOOT FLASH RECOVERY *RECOVERYNAME*. Once target is sent, press and hold volume up and power button together, once it vibrates release the power button and keep holding volume up, it will reboot to orangefox. Once it boots, copy the orangefox zip file and flash it again, now it will be permanent, then go to manage storage and format data (that where you type YES).
What I'm not sure is if it will boot without wiping data. Otherwise try skipping the data wipe and just flash orangefox twice like above
Sent from my Redmi K20 Pro using Tapatalk

ishaqtkr said:
You'll have to format data i think. Otherwise try, this is the latest for raphael https://files.orangefox.tech/OrangeFox-Stable/raphael/OrangeFox-R10.0_8-Stable-raphael.zip
Unzip the file, then take the recovery.img file from it and FASTBOOT FLASH RECOVERY *RECOVERYNAME*. Once target is sent, press and hold volume up and power button together, once it vibrates release the power button and keep holding volume up, it will reboot to orangefox. Once it boots, copy the orangefox zip file and flash it again, now it will be permanent, then go to manage storage and format data (that where you type YES).
What I'm not sure is if it will boot without wiping data. Otherwise try skipping the data wipe and just flash orangefox twice like above
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Ok this is really weird. I sent across the latest OrangeFox via Fastboot. Booted into it. Installed again via Zip. It rebooted back into Orangefox. Wiped data. Then re-started phone and set everything up (second time today :crying.
I then downloaded magisk and booted into recovery to install it only to find out it's back to stock!!???
I really don't want to wipe my data again so any idea as to which TWRP works on this phone? I just tried the mauronofrio one but it boots to a black screen :crying:

Flash magisk before you setup your stuff, magisk will stop it from restoring back to stock recovery.
Sent from my Redmi K20 Pro using Tapatalk

ishaqtkr said:
Flash magisk before you setup your stuff, magisk will stop it from restoring back to stock recovery.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Ok thanks. But are you aware of any TWRP that works on the Global 9t Pro with Android Q?

Yes that of Maurofanio or something like that is his name, it's in here.
Sent from my Redmi K20 Pro using Tapatalk

ishaqtkr said:
Yes that of Maurofanio or something like that is his name, it's in here.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Got it! Thanks.