Database Develop

MIUI 10 Global Open Beta 9.5.16, Android Pie!

https://bigota.d.miui.com/9.5.8/miui_MIMIX2Global_9.5.8_abbfb1e4ff_9.0.zip
It's a closed Beta, not tested yet, I'll try it later.
---
http://bigota.d.miui.com/9.5.16/miui_MIMIX2Global_9.5.16_25e576bc8a_9.0.zip
Open Beta!

Dirty flashed over latest Global Beta.
Flashed with latest Universal DM-Verity-ForceEncrypt and Magisk 19.1
Flawless working ATM.
Regards!

Can I flash it over Pixel Experience but with wipeing data and internal storage?

Bluezzy said:
Can I flash it over Pixel Experience but with wipeing data and internal storage?
Click to expand...
Click to collapse
IMHO don't try that.
I only recommend to dirty flash it over Global Beta.
In your case I should do a clean flash.

Huexxx said:
IMHO don't try that.
I only recommend to dirty flash it over Global Beta.
In your case I should do a clean flash.
Click to expand...
Click to collapse
I mean i flashed PE over MIUI 10.2 so MIUI is base ROM and after clearing whole storage it should boot fine

Backup and try...

Can you guide me, it just stops at the boot screen

ThaitaiHo said:
Can you guide me, it just stops at the boot screen
Click to expand...
Click to collapse
Do a full wipe in the Recovery (Google it) and flash the Miui Zip from the OP. Done.
I'll give it a try now... MIUI is the only OEM System that i would prefer over AOSP. At least if its based on a actual Android Version (Oreo was a Pain compared to Pie). Thanks God is Pie finally coming... Thanks for sharing!

Huexxx said:
Dirty flashed over latest Global Beta.
Flashed with latest Universal DM-Verity-ForceEncrypt and Magisk 19.1
Flawless working ATM.
Regards!
Click to expand...
Click to collapse
Can you provide more screenshots, thanks in advance

Hey Guys.
This is a pretty stable rom. Flashed it yesterday and everything is working just fine.. Just follow the usual steps. (Assuming that you guys have a custom recovery.)
1, as per the OP, if u r coming from Miui global, just flash this over but if u r coming from custom Pie rooms, you need to do an advanced wipe from recovery. Wipe System, Data, Cache, Vendor.
Note: there is no need to wipe internal storage.
2, flash the rom but don't boot immediately. Flash the universal deScript file if you wish to maintain decrypted state. And then reboot
3, Set things up and flash magisk to root. Works perfect too.
P.S If you do not have a custom recovery, you would have to backup internal storage because updating through Xiaomi's recovery is bound to wipe everything.
Cheers.

manu_up said:
Hey Guys.
This is a pretty stable rom. Flashed it yesterday and everything is working just fine.. Just follow the usual steps. (Assuming that you guys have a custom recovery.)
1, as per the OP, if u r coming from Miui global, just flash this over but if u r coming from custom Pie rooms, you need to do an advanced wipe from recovery. Wipe System, Data, Cache, Vendor.
Note: there is no need to wipe internal storage.
2, flash the rom but don't boot immediately. Flash the universal deScript file if you wish to maintain decrypted state. And then reboot
3, Set things up and flash magisk to root. Works perfect too.
P.S If you do not have a custom recovery, you would have to backup internal storage because updating through Xiaomi's recovery is bound to wipe everything.
Cheers.
Click to expand...
Click to collapse
My device restarted continuously, where can I download the " universal deScript" file?

https://drive.google.com/file/d/1OZqvFZyo7M10j-hHqJERO1h3SdbYFAUx/view?usp=drivesdk
Tapatalkkal Mi MIX 2

Huexxx said:
https://bigota.d.miui.com/9.5.8/miui_MIMIX2Global_9.5.8_abbfb1e4ff_9.0.zip
It's a closed Beta, not tested yet, I'll try it later.
Click to expand...
Click to collapse
Is there ARB?

It still has a lot of problems for 9.5.8. I have already tested and today he has released 9.5.9 but can't find the load link because he closed.

xuxu09 said:
My device restarted continuously, where can I download the " universal deScript" file?
Click to expand...
Click to collapse
Here it is,
https://androidfilehost.com/?fid=1322778262904014005
Credits to Andy Yan
Please use this only if your phone was already decrypted. If it was not, then this file is useless. You would have to wipe internal storage, then flash rom and then flash this DecScript.

complicazio said:
Is there ARB?
Click to expand...
Click to collapse
Yes, My Account was automatically filled in after using AOSP and flashing this after a Full wipe including formatting data.
manu_up said:
Here it is,
https://androidfilehost.com/?fid=1322778262904014005
Credits to Andy Yan
Please use this only if your phone was already decrypted. If it was not, then this file is useless. You would have to wipe internal storage, then flash rom and then flash this DecScript.
Click to expand...
Click to collapse
Wiping internal will not do the trick alone. Would be the best to format data right!? (Includes /data and internal)

Wiping internal will not do the trick alone. Would be the best to format data right!? (Includes /data and internal)[/QUOTE]
Yes of course. Wiping the other partitions is something necessary by default. The requirement of wiping internal storage is dependant on whether your phone is in an encrypted or decrypted state. If you are not sure whether it is in either of the states, or if u r not sure what these things mean, ur phone is likely to be encrypted. So formatting all partitions and then following my instructions would solve any problems.
P.S.. The orangefox recovery is a good recovery to flash the rom.

9.5.8 pie for mix2 has a lot of problems, if not necessary, do not flash, I warned, but if 9.5.9 is stable at a certain level, the problem is small, works well, waiting for a long time, leaving beta to the public. Or who wants to test it

Today 9.5.9 pie for Mix2 is officially released. Can load and test now, no need to fix it, fhash can be both recovery mode and fastboot rom works well
---------- Post added at 07:47 AM ---------- Previous post was at 07:19 AM ----------
https://androidfilehost.com/?w=files&flid=293856

สุรินทร์ พลโธา said:
Today 9.5.9 pie for Mix2 is officially released. Can load and test now, no need to fix it, fhash can be both recovery mode and fastboot rom works well
---------- Post added at 07:47 AM ---------- Previous post was at 07:19 AM ----------
https://androidfilehost.com/?w=files&flid=293856
Click to expand...
Click to collapse
Where? I cannot find it officially neither with OTA (open beta). Maybe are you talking about the .eu ROM? In that case here we are talking about official ROM, MIUI.

Anyone knows how to flash gsi roms on this device?

I tried to flash different gsi images and always get bootlop to fastboot mode.

jlorf7 said:
I tried to flash different gsi images and always get bootlop to fastboot mode.
Click to expand...
Click to collapse
To flash gsi images, I installed chinese rom then twrp and images have to be a/b not a.

jlorf7 said:
To flash gsi images, I installed chinese rom then twrp and images have to be a/b not a.
Click to expand...
Click to collapse
But the treble check shows redmagic 3 has only slot A not A&B.
So how did you do that flashing A/B
Please also post a guide if possible and you have time for the same..
Really appreciate.
Thanks

rajnathr said:
But the treble check shows redmagic 3 has only slot A not A&B.
So how did you do that flashing A/B
Please also post a guide if possible and you have time for the same..
Really appreciate.
Thanks
Click to expand...
Click to collapse
I know but with aonly always boot to fastboot mode, check in this it shows ab https://github.com/phhusson/treble_experimentations/wiki
I posted a mini guide in another thred: https://forum.xda-developers.com/showthread.php?p=80641265
Enviado desde mi NX629J mediante Tapatalk

I know I'm being a jerk here but the thing that I don't own a PC force me to post this here. If anyone can try to install game space and see if it would work. I believe gsi rom is much better than stock rom for our device as I'm using stock global rom and encounter lot of bugs and the only thing that make me happy is game space. Thanks!

Irwan Fauzi said:
I know I'm being a jerk here but the thing that I don't own a PC force me to post this here. If anyone can try to install game space and see if it would work. I believe gsi rom is much better than stock rom for our device as I'm using stock global rom and encounter lot of bugs and the only thing that make me happy is game space. Thanks!
Click to expand...
Click to collapse
This Friday hope I will be testing maximum no. of GSI image and will be posting which boots and working better for Redmagic 3 in a separated thread for discussion with the community.
Also will backup such as Game launcher, LED Strip and other important app using titanium backup and will try to install as system to check if they are working or not.

Just flash the Chinese rom then flash TWRP and then go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development and pick any rom you want some of them even have GAPPS included
---------- Post added at 04:37 PM ---------- Previous post was at 04:31 PM ----------
If you're having trouble with GAPPS follow this steps
1) Boot into TWRP
2) Flash latest GSI img
3) Resize system file system (necessary on my device otherwise gapps will not install)
- Wipe -> Advanced -> select system -> resize file system
4) Flash pico or mini or aroma which ever you want gapps zip
6) Flash magisk zip
7) reboot

every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?

jenbot said:
every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?
Click to expand...
Click to collapse
Did you try ab version?

jenbot said:
every (gsi) rom i've tried so far(various versions of resurrection remix, lineage, android 9 AOSP) has gotten stuck at the boot animation, tried pretty much everything i could think of(with a lot of getting stuck at the bootloader as a result)
for twrp i followed standard guides and the guides posted here, no errors, just gets stuck at the boot animation(i've waited for up to 2 hours to see if it might still continue)
anyone have any idea what could be going wrong?
Click to expand...
Click to collapse
Did you wipe system? Also, wipe data after 1st failed boot. Flash vbmeta ???

Irwan Fauzi said:
Did you try ab version?
Click to expand...
Click to collapse
yes
suzook said:
Did you wipe system? Also, wipe data after 1st failed boot. Flash vbmeta ???
Click to expand...
Click to collapse
yes, yes and yes

I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:

h4cxxc0r3 said:
I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:
Click to expand...
Click to collapse
Do you mind testing if game space work?

h4cxxc0r3 said:
I've successfully installed aosp 9 (phhusson), havoc 2.9 & 3 on my phone.
Here's some step that i take:
1. Install Chinese rom
2. Reboot to stock recovery wipe userdata & cache
3. Install twrp
4. Flash system image from twrp (always use a/b image)
5. Resize filesystem
6. Flash gapps & magisk
The phone should reboot once on the 1st boot and then boot normaly on the 2nd, you will know you've succeeded if the screen become dim at booting. That should take only a couple minutes, not hours. If that didn't happen try to format data from twrp or use different rom (i found that aex didn't work on my phone)
Hope this help :good:
Click to expand...
Click to collapse
Hi. I tried the phhusson 10.0 V203. It worked and it booted. I used ARM64 AB image. Everything was working fine, except i was unable to make any outgoing calls. So i tried to use a different image. After that nothing is working. Even the image that worked the first time doesn't work. It keeps getting stuck in boot loop and going to fastboot. I tried with 4 GSI images, nothing is working.

Irwan Fauzi said:
Do you mind testing if game space work?
Click to expand...
Click to collapse
I've reverted my phone back to cn rom soon after because of the strange vibration bug on every single gsi rom i've tested and forgot to take stock rom system dump at that time so i never got any chance to try it.
But i've tried to install gamespaces stuff to my other phone running aex pie with no avail. So, unless anyone know how to mod the app or port the necessary framework stuff from stock into gsi rom I think it will never work.
Maybe some overlay will make it work. i don't know, just guessing.
---------- Post added at 08:17 AM ---------- Previous post was at 08:01 AM ----------
vimalrajan1988 said:
Hi. I tried the phhusson 10.0 V203. It worked and it booted. I used ARM64 AB image. Everything was working fine, except i was unable to make any outgoing calls. So i tried to use a different image. After that nothing is working. Even the image that worked the first time doesn't work. It keeps getting stuck in boot loop and going to fastboot. I tried with 4 GSI images, nothing is working.
Click to expand...
Click to collapse
If you stuck on fastboot after splash screen (without boot animation) then you have to use the unbrick tool to flash over the system and redo it if you want to. Never reboot without system on this phone or you'll stuck on fastboot.
But if it got bootloop at booting screen and able to enter twrp then you can try to wipe or format data. It happens on my phone too. I don't know if the twrp was buggy or something but yeah just try it back and forth between wiping and formating then it will randomly fixed.

Red magic 3 treble
That's the thing with this phone. Everything is random. I did use the repair tool and flashed the latest global version. But I am unable to flash the gsi again. It keeps getting stuck in fastboot screen. But if I select recovery from fastboot. It does goes to twrp recovery. But nothing after that. I hope someone can make a custom rom with Nubia launcher.

Red magic NEEDS to provide us with fastboot images...We have no real way to recover from a semi brick WTF!

h4cxxc0r3 said:
I've reverted my phone back to cn rom soon after because of the strange vibration bug on every single gsi rom i've tested and forgot to take stock rom system dump at that time so i never got any chance to try it.
But i've tried to install gamespaces stuff to my other phone running aex pie with no avail. So, unless anyone know how to mod the app or port the necessary framework stuff from stock into gsi rom I think it will never work.
Maybe some overlay will make it work. i don't know, just guessing.
---------- Post added at 08:17 AM ---------- Previous post was at 08:01 AM ----------
If you stuck on fastboot after splash screen (without boot animation) then you have to use the unbrick tool to flash over the system and redo it if you want to. Never reboot without system on this phone or you'll stuck on fastboot.
But if it got bootloop at booting screen and able to enter twrp then you can try to wipe or format data. It happens on my phone too. I don't know if the twrp was buggy or something but yeah just try it back and forth between wiping and formating then it will randomly fixed.
Click to expand...
Click to collapse
I'm on havoc 2.9 right now. I managed to install game space and run it but it doesn't activate fan, so I'm guessing it need permissions and framework files which I don't know it's file name so I just give up on this. But game space does run like normal app. If you are wondering how I install game space, I pull out game space apk from global system.bat.br (after converted it to system.img) and put the apk in system/app using twrp file manager. Maybe someone knowledgeable can figure this out.

Irwan Fauzi said:
I'm on havoc 2.9 right now. I managed to install game space and run it but it doesn't activate fan, so I'm guessing it need permissions and framework files which I don't know it's file name so I just give up on this. But game space does run like normal app. If you are wondering how I install game space, I pull out game space apk from global system.bat.br (after converted it to system.img) and put the apk in system/app using twrp file manager. Maybe someone knowledgeable can figure this out.
Click to expand...
Click to collapse
What app did you use to covert the .br file? Trying to make fastboot .IMG files.

suzook said:
What app did you use to covert the .br file? Trying to make fastboot .IMG files.
Click to expand...
Click to collapse
I use termux app from play store.. There's a guide on xda how to extract system.dat.br without pc.. link

[SHARE] Resurrection remix Android 10 for OnePlus 7 Pro Gaucamole is finally here!!!

Today i'm sharing you official Android Q Resurrection remix ROM for OnePlus 7 Pro.
I have flashed this rom on my op 7 pro and its running like butter.
Guide/steps to install this rom in your OnePlus 7 Pro
.
.
NOTE: THIS ROM IS ONLY FOR ONEPLUS 7 PRO. DON'T TRY THIS ROM IN OTHER DEVICE.
.
.
.
Here are the steps to install
1.First of all download oxygen os open beta 13 and rom resurrection remix android 10 rom for OnePlus 7 pro.
2.Boot into twrp flash Open Beta 13 then flash twrp then reboot into recovery. Again flash open beta 13 flash twrp.
3. After flashing open beta 13 on both slots (don't forget to flash twrp just after you flash open beta 13) Reboot into recovery again. Then Wipe data, format data.
4. Plug your phone into pc. Transfer all download Files to phone.
5. Flash Resurrection remix Android 10 Rom
6. Flash twrp (Don't flash magisk right now)
7. Again flash twrp
8. Reboot recovery again
9. After rebooting into recovery again flash Resurrection remix Android 10 Rom then again twrp flash
10. Again wipe data dalvik/cache then format data
11. Done. Just reboot your device normally (first boot may take 5-10 minutes)
12. Then setup your device by normal formalities then boot into twrp flash magisk
Done.
(Note: Don't flash Or Download Gapps. Bcz its already included.
Current issue: Nothing.
This Rom is not mine. I just flashed it. And shared a small tutorial here for other OnePlus 7 Pro users.
Have fun.
Download link of resurrection remix Android 10 rom
https://get.resurrectionremix.com/?dir=ten/guacamole/
.
.
.
Credits
Special thanks to @varund7726 as the official dev of this ROM and the RR team @ www.resurrectionremix.com
.
Source
ROM: https://github.com/ResurrectionRemix
Kernel: https://github.com/ResurrectionRemix-Devices/android_kernel_oneplus_sm8150/
.

Wow..fantastic

Very nice..was waiting for
And one more thing to ask are u gujju?

punit1708 said:
Very nice..was waiting for
And one more thing to ask are u gujju?
Click to expand...
Click to collapse
nope. I am not gujrati. But i'm from Rajasthan

vimal suthar said:
nope. I am not gujrati. But i'm from Rajasthan
Click to expand...
Click to collapse
Ok.. bhai link is not there for download?

punit1708 said:
Ok.. bhai link is not there for download?
Click to expand...
Click to collapse
Link is already provided in the post.

Thanks for the heads up. Maybe the ROM will get a proper/official thread from the device maintainer.
FYI: You might want to edit or delete your first screenshot as it shows your phone and IMEI numbers.
10. Again wipe data dalvik/cache then format data
11. Done. Just reboot your device normally (first boot may take 5-10 minutes)
Click to expand...
Click to collapse
I don't think the device will boot after formatting data partition!

How come the flashing instructions require flashing Beta/RRR/TWRP so many times with so many reboots between? And formatting data etc after flashing?
Has anyone else had success with flashing the ROM as per OP instructions? Running OB13 just want to confirm the instructions work

JIMMMEHHHH said:
How come the flashing instructions require flashing Beta/RRR/TWRP so many times with so many reboots between? And formatting data etc after flashing?
Has anyone else had success with flashing the ROM as per OP instructions? Running OB13 just want to confirm the instructions work
Click to expand...
Click to collapse
I tried by myself bro. It is the only way to successfull flash.

Toutatis_ said:
Thanks for the heads up. Maybe the ROM will get a proper/official thread from the device maintainer.
FYI: You might want to edit or delete your first screenshot as it shows your phone and IMEI numbers.
I don't think the device will boot after formatting data partition!
Click to expand...
Click to collapse
I didn't said wipe system bro. Just format data and type YES that's it

Where is source code for rom??
This thread will be closed...read the rules for posting new thread on this forum...you must have link to source code of the rom...Its nice that you want to share that RR is out for OP7pro, but this is not a way to do that
you are not a developer of this rom, so you dont have permision to post it here..
And second, your flashing instruction are too confusing, i seriosly doubt that you must be on beta OOS to flash RR.

scrin378 said:
Where is source code for rom??
This thread will be closed...read the rules for posting new thread on this forum...you must have link to source code of the rom...Its nice that you want to share that RR is out for OP7pro, but this is not a way to do that
you are not a developer of this rom, so you dont have permision to post it here..
And second, your flashing instruction are too confusing, i seriosly doubt that you must be on beta OOS to flash RR.
Click to expand...
Click to collapse
Thanks for this, I thought the flashing instructions seemed convoluted.

scrin378 said:
Where is source code for rom??
This thread will be closed...read the rules for posting new thread on this forum...you must have link to source code of the rom...Its nice that you want to share that RR is out for OP7pro, but this is not a way to do that
you are not a developer of this rom, so you dont have permision to post it here..
And second, your flashing instruction are too confusing, i seriosly doubt that you must be on beta OOS to flash RR.
Click to expand...
Click to collapse
I don't care bro if they delete this post. I just wanted to share this and i did. And yes you have to on open beta 13 else you will get bootloop

vimal suthar said:
I don't care bro if they delete this post. I just wanted to share this and i did. And yes you have to on open beta 13 else you will get bootloop
Click to expand...
Click to collapse
You are wrong buddy.
1. I installed on top of the stable OOS.
2. No need of flashing the ROM 2 times, once is fine and no need to wipe data after flashing OOS.
3. if anyone is decrypted no need of formatting data, wiping data is fine.

How is the vibration, brightness and fp speed?

Niki Exodia007 said:
You are wrong buddy.
1. I installed on top of the stable OOS.
2. No need of flashing the ROM 2 times, once is fine and no need to wipe data after flashing OOS.
3. if anyone is decrypted no need of formatting data, wiping data is fine.
Click to expand...
Click to collapse
Then you can go and have try brother. ?

vimal suthar said:
Then you can go and have try brother. ?
Click to expand...
Click to collapse
I am already using it.

Dbj.Dhaval said:
How is the vibration, brightness and fp speed?
Click to expand...
Click to collapse
All are working fine. But i felt that vibration is high. I mean vibration strength is much higher than Oxygen OS. This is only my opinion.

You know there's a section for this, its called Guides , NEWS and Discussion

just curious is the FP is gonna flicking the screen while unlocking? or is not because i don't really like the flicking screen during the unlocking process

Flashing GSI image bootloops the device

I have been using custom roms for years.
I wanted to try flashing GSI images, and i decided to start with Havoc-OS-v4.4-20210503-arm64-a-Official-vanilla.img
I installed twrp-3.5.2_9-0-z2_row
I completely wiped everything, system/cache/data etc.
I flashed Havoc-OS-v4.4-20210503-arm64-a-Official-vanilla.img then NikGapps-basic-arm64-11-20210514-signed.zip.
Rebooted.
Phone is instantly resetting right after the ZUK logo goes away. stuck in boot loop. Am i doing something wrong ?

hash02 said:
I have been using custom roms for years.
I wanted to try flashing GSI images, and i decided to start with Havoc-OS-v4.4-20210503-arm64-a-Official-vanilla.img
I installed twrp-3.5.2_9-0-z2_row
I completely wiped everything, system/cache/data etc.
I flashed Havoc-OS-v4.4-20210503-arm64-a-Official-vanilla.img then NikGapps-basic-arm64-11-20210514-signed.zip.
Rebooted.
Phone is instantly resetting right after the ZUK logo goes away. stuck in boot loop. Am i doing something wrong ?
Click to expand...
Click to collapse
Can you send me the link of the thread where you saw your rom?. Pretty sure theres a tutorial in it.. You are missing some important step like flashing create vendor.zip or repartitioner.zip and some other stuff.. Give me the link...

[11][OFFICIAL] Havoc-OS 4.1 [ARM64/ARM/A64][A/AB/AB-VNDKLITE][GApps/Vanilla]
Havoc-OS 4.x is based on AOSP, inspired by Google Pixel. Has a refined Material Design 2 UI crafted by @SKULSHADY. Many useful features that will blow your mind. All you can dream of and all you'll ever need. Just flash and enjoy... General...
forum.xda-developers.com
Your question is a bit weird because this is a GSI. it's not model specific and should apply to things treble.
So it's not "my rom" it's just a gsi rom that should just work, right ? (unless i did something wrong)
Procedure was standard, clean, no dirty flashing.
Flash img, then gapps, then reboot.
I remember the instructions were for an older version of havoc, i just took the latest build because that's what you usually do ???
Regardless, this is not a HAVOC issue, I later tried with caos build caos-v307-210507-arm64-agZ.img. The exact same behavior happened.

hash02 said:
[11][OFFICIAL] Havoc-OS 4.1 [ARM64/ARM/A64][A/AB/AB-VNDKLITE][GApps/Vanilla]
Havoc-OS 4.x is based on AOSP, inspired by Google Pixel. Has a refined Material Design 2 UI crafted by @SKULSHADY. Many useful features that will blow your mind. All you can dream of and all you'll ever need. Just flash and enjoy... General...
forum.xda-developers.com
Your question is a bit weird because this is a GSI. it's not model specific and should apply to things treble.
So it's not "my rom" it's just a gsi rom that should just work, right ? (unless i did something wrong)
Procedure was standard, clean, no dirty flashing.
Flash img, then gapps, then reboot.
I remember the instructions were for an older version of havoc, i just took the latest build because that's what you usually do ???
Regardless, this is not a HAVOC issue, I later tried with caos build caos-v307-210507-arm64-agZ.img. The exact same behavior happened.
Click to expand...
Click to collapse
Redo the process and try to flash the gsi only without gaps then boot..

r
ivanjudge said:
Redo the process and try to flash the gsi only without gaps then boot.. You can check this out also maybe it will help? https://forum.xda-developers.com/t/zuk-z2-pro-project-treble-android-10-11-12-gsi-ab.4197355/
Click to expand...
Click to collapse

to flash a GSI image first you should wipe all except internal storage.
then install a Vendor ie; Basic roms like AEX, ARROW OS according to the GSI Version
if you GSI image is based on Android 10 then you should flash a android 10 rom from aex or arrow, then flash the gsi to system, then reboot

prc.kailas said:
to flash a GSI image first you should wipe all except internal storage.
then install a Vendor ie; Basic roms like AEX, ARROW OS according to the GSI Version
if you GSI image is based on Android 10 then you should flash a android 10 rom from aex or arrow, then flash the gsi to system, then reboot
Click to expand...
Click to collapse
So, the gsi flashing just copies the image-byte-by-byte to the /system partition ?
Just like dd on linux ? Blind transfer from one direction to the other ?Is this why you recommend flashing "basic roms", so that by flashing the zips all other partitions are updated accordingly ? like /vendor and so on ?Please clarify and keep it technical, i want to learn

ivanjudge said:
Redo the process and try to flash the gsi only without gaps then boot..
Click to expand...
Click to collapse
I already did
right now i am on aospextended android 11 version. since it's not a gsi image it worked. but it is unstable and i really want to try the gsi images and make it work primarily out of technical curiosity

hash02 said:
I already did
right now i am on aospextended android 11 version. since it's not a gsi image it worked. but it is unstable and i really want to try the gsi images and make it work primarily out of technical curiosity
Click to expand...
Click to collapse
Try what @hash02 said you can check the link i gave you above to view the full detail and to avoid boot loops reboot to recovery after flashing the gsi then flash the gapss then factory reset then reboot...And dont use nikgaps instead use other Gapps..

ivanjudge said:
Try what @hash02 said you can check the link i gave you above to view the full detail and to avoid boot loops reboot to recovery after flashing the gsi then flash the gapss then factory reset then reboot...And dont use nikgaps instead use other Gapps..
Click to expand...
Click to collapse
Well, Ok but where do i find android 11 opengapps ?

I didn't find any other gapps for Android 11.
However I tried your method even if it makes absolutely no sense at all. This device is a-only not a/b. Can you explain that or is that an elephant in the room that you dont want to talk about ?
In any case, the device does not bootloop anymore, it just sits in fastboot mode.

These are the steps to flash a gsi on zuk z2 pro correctly:
Wipe clean all partitions excluding user data
Then flash https://forum.xda-developers.com/t/radio-modem-basebands-for-zuk-z2-pro-only.3715835/ latest baseband
Flash boot image [ linked below - it is the boot image extracted from a mokee 9.0 rom ]
flash vendor image [ copied from another thread ]
flash gsi image [which ever you want]
reboot to recovery again [ sometimes it doesnt work unless you do ]
reboot to system
https://mega.nz/folder/E55iTZQJ#jNsa9d7WxLKr-9q_LFPS1A saved here for anyone else's convenience.

hash02 said:
So, the gsi flashing just copies the image-byte-by-byte to the /system partition ?
Just like dd on linux ? Blind transfer from one direction to the other ?Is this why you recommend flashing "basic roms", so that by flashing the zips all other partitions are updated accordingly ? like /vendor and so on ?Please clarify and keep it technical, i want to learn
Click to expand...
Click to collapse
by flashing gsi no vendor is updated or modified. because gsi's are generic rom with only system image, no other partitions. so flashing a basic rom (especially made for your device) , that will update every partition, and then replacing system by gsi system thats all.

prc.kailas said:
by flashing gsi no vendor is updated or modified. because gsi's are generic rom with only system image, no other partitions. so flashing a basic rom (especially made for your device) , that will update every partition, and then replacing system by gsi system thats all.
Click to expand...
Click to collapse
Thank you, I figured as much as I did a lot of testing trial and error and flashed lots of files yesterday. Got it working booting etc. Unfortunately the ROMs don't support fingerprint scanner out of the box and didn't bother to make it work. Just wanted something stable to use my phone. Thx

hash02 said:
superior-arm64-bvN-userdebug.img with AEX 7.3 works awesome and stable enough.
Click to expand...
Click to collapse
havoc-arm64-bvN-vndklite.img with AEX 7.3 works

hash02 said:
Thank you, I figured as much as I did a lot of testing trial and error and flashed lots of files yesterday. Got it working booting etc. Unfortunately the ROMs don't support fingerprint scanner out of the box and didn't bother to make it work. Just wanted something stable to use my phone. Thx
Click to expand...
Click to collapse
for me AEX 8.1 is awesome, but none of custom support Uhealth with Sp02 sensor. its very usefull at this time.

Any official or unofficial lineage OS for Samsung galaxy M21

Hello everyone so I have a Samsung galaxy M21 with One UI 3.1 core. Are there any lineage OS official or unofficial builds for Android 11? If you know please reply to this, thank you in advance!!!

Join telegram
they have CrDroid android 11

sinkoo1979 said:
Join telegram
they have CrDroid android 11
Click to expand...
Click to collapse
Thanks so much I'll join the telegram channel.

Before you waste ur time on telegram, the crdroid 11 does not work as of now and the dev isn't prepared to fix it. So wait until it is posted in xda

GuruPrasadAH said:
Before you waste ur time on telegram, the crdroid 11 does not work as of now and the dev isn't prepared to fix it. So wait until it is posted in xda
Click to expand...
Click to collapse
Any GSI you will recommend? (for M215G)

OldNoobOne said:
Any GSI you will recommend? (for M215G)
Click to expand...
Click to collapse
Any will work. I personally use crdroid since it is lightweight, has good performance, and has a lot of customizations. Use soulr344's twrp and use the built in super cmd to flash. Then flash Multidisabler, null vbmeta and magisk.
Use this build: https://github.com/eremitein/treble-patches/wiki/crDRom11-Project
Also don't plug in charger while power off, it will become stuck on boot screen. Use vol down+ power to reboot if that happens. Also DONT install hktweaks and overclock/underclock, it will cause random reboot
Chill
GuruPrasadAH

GuruPrasadAH said:
Any will work. I personally use crdroid since it is lightweight, has good performance, and has a lot of customizations. Use soulr344's twrp and use the built in super cmd to flash. Then flash Multidisabler, null vbmeta and magisk.
Use this build: https://github.com/eremitein/treble-patches/wiki/crDRom11-Project
Also don't plug in charger while power off, it will become stuck on boot screen. Use vol down+ power to reboot if that happens. Also DONT install hktweaks and overclock/underclock, it will cause random reboot
Chill
GuruPrasadAH
Click to expand...
Click to collapse
thanks bro ,
I dont have null vbmeta though, can you post link for null vbmeta if possible and the sequence of flashing the files as per your opinion.
I am downloading ( crdrom-v313-210921-arm64-BvZ-lite.img.xz ) for M215G (Galaxy M21 2021 Edition)
#Note -
I tried to flash another lineage GSI for android 11-> LirRMod ( lir-v313-210915-arm64-bvZ-lite.img) but failed so. Thanks in advance bro

OldNoobOne said:
thanks bro ,
I dont have null vbmeta though, can you post link for null vbmeta if possible and the sequence of flashing the files as per your opinion.
I am downloading ( crdrom-v313-210921-arm64-BvZ-lite.img.xz ) for M215G (Galaxy M21 2021 Edition)
#Note -
I tried to flash another lineage GSI for android 11-> LirRMod ( lir-v313-210915-arm64-bvZ-lite.img) but failed so. Thanks in advance bro
Click to expand...
Click to collapse
Yes... I failed many times, but it is all about the null vbmeta. That only disables dm-verity. I made this vbmeta flasher myself, bc no other existed.
Order-
1. WIpe data and reboot to recovery
2. Plugin to pc and transfer gsi image, vbmeta zip, multidisabler, and magisk(optional) to documents folder.
3. Go to terminal
4. Type the following cmds one by one
cd sdcard
cd documents
super mount system
super flash system [Name-of-the-image].img
5. Flash vbmeta
6. Flash multidisabler
7. Flash magisk(again, optional)
8. Flash custom kernel if u want( I recommend PrishKernel)
9. Reboot to system and enjoy.

Bro thanks so much, I will try your steps and tell you what happens ok

GuruPrasadAH said:
Yes... I failed many times, but it is all about the null vbmeta. That only disables dm-verity. I made this vbmeta flasher myself, bc no other existed.
Order-
1. WIpe data and reboot to recovery
2. Plugin to pc and transfer gsi image, vbmeta zip, multidisabler, and magisk(optional) to documents folder.
3. Go to terminal
4. Type the following cmds one by one
cd sdcard
cd documents
super mount system
super flash system [Name-of-the-image].img
5. Flash vbmeta
6. Flash multidisabler
7. Flash magisk(again, optional)
8. Flash custom kernel if u want( I recommend PrishKernel)
9. Reboot to system and enjoy.
Click to expand...
Click to collapse
Hi bro, I followed the steps above till step 5:
1. cd sdcard (worked)
2. cd documents (worked)
3. super mount system (worked)
4. super flash system crdrom-v313-210921-arm64-bvZ-lite.img (flashed but in 1s time)
so , I think gsi did not flash properly. any idea why?

OldNoobOne said:
Hi bro, I followed the steps above till step 5:
1. cd sdcard (worked)
2. cd documents (worked)
3. super mount system (worked)
4. super flash system crdrom-v313-210921-arm64-bvZ-lite.img (flashed but in 1s time)
so , I think gsi did not flash properly. any idea why?
Click to expand...
Click to collapse
Actually, raw images flash like this only. Carry on doing all the steps bro(did u try flashing every thing else and try booting?). Anyway, hope this helps you

GuruPrasadAH said:
Actually, raw images flash like this only. Carry on doing all the steps bro(did u try flashing every thing else and try booting?). Anyway, hope this helps you
Click to expand...
Click to collapse
Thanks bro, finally CRD managed to boot , I flashed stock rom then after that I followed your steps and it booted! . You saved my life bro coz GSI flashing guide on xda looked very complicated to me.
You said you made the vbmeta file on your own so you should be senior member in xda not new member XD . If you have donate button then pls post coz you & CrD deserve some donations. Thanks a lot
Can you also make vbmeta for Redmi Note 10 Mojito? Pls Pls

OldNoobOne said:
Thanks bro, finally CRD managed to boot , I flashed stock rom then after that I followed your steps and it booted! . You saved my life bro coz GSI flashing guide on xda looked very complicated to me.
You said you made the vbmeta file on your own so you should be senior member in xda not new member XD . If you have donate button then pls post coz you & CrD deserve some donations. Thanks a lot
Can you also make vbmeta for Redmi Note 10 Mojito? Pls Pls
Click to expand...
Click to collapse
Just a few clarifications:
1. I only made the flasher zip for the vbmeta. The image itself - was provided by google.
2. This zip should and will probably work on all phones, except maybe a few with weird vbmeta partition name( samsung vbmeta partition name is actually vbmeta_samsung instead of vbmeta only, and I think LG does the same too).
If it does not work( shows failed msg ) then send me the link of that device's twrp. I will maybe make an update if i find time.
Chill
GuruPrasadAH

Also, I'm just 13 yo as of now, so no donation for me. However, if u want to donate to crd, follow these two links:
https://www.paypal.com/paypalme/crdroidandroid -For crDroid themselves
For the guy who built the GSI, there seems to be no donate button.
Also, I saw ur post asking question about how M215G is different. Actually it is same, and remember - fastboot can never be installed on samsung. Also, turn off auto reboot when flashing twrp with odin, then hold down vol down+power for 7 secs until it reboots, then immediately press vol up+power. After this, wipe data and flash ROM.
If u reboot back to system without flashing multidisabler/rom, twrp will automatically be replaced with stock recovery. Hope this helps.
Chill
GuruPrasadAH

GuruPrasadAH said:
Also, I'm just 13 yo as of now, so no donation for me. However, if u want to donate to crd, follow these two links:
https://www.paypal.com/paypalme/crdroidandroid -For crDroid themselves
For the guy who built the GSI, there seems to be no donate button.
Also, I saw ur post asking question about how M215G is different. Actually it is same, and remember - fastboot can never be installed on samsung. Also, turn off auto reboot when flashing twrp with odin, then hold down vol down+power for 7 secs until it reboots, then immediately press vol up+power. After this, wipe data and flash ROM.
If u reboot back to system without flashing multidisabler/rom, twrp will automatically be replaced with stock recovery. Hope this helps.
Chill
GuruPrasadAH
Click to expand...
Click to collapse
Thanks bro, I am surprised how all the developers I came across are 13 year old
Wish you luck bro
CrDroid is good but I think ROMs are better than GSIs, for example -
1. CrDroid GSI has issue with MTP, device not getting recognized by PC! but inside TWRP I can transfer files from pc to Internal Storage
2. Also 3-button NavBar background is opaque not transparent so NavBar takes up 10% of the screen, gesture is fine but navbar is very handy.
I did not find any CrDroid vanilla version

OldNoobOne said:
Thanks bro, I am surprised how all the developers I came across are 13 year old
Wish you luck bro
CrDroid is good but I think ROMs are better than GSIs, for example -
1. CrDroid GSI has issue with MTP, device not getting recognized by PC! but inside TWRP I can transfer files from pc to Internal Storage
2. Also 3-button NavBar background is opaque not transparent so NavBar takes up 10% of the screen, gesture is fine but navbar is very handy.
I did not find any CrDroid vanilla version
Click to expand...
Click to collapse
Actually, one guy Daniel on telegram built a crdroid 11 rom(not gsi) for m21, however last I checked, it did not boot and booted into fastboot(pls don't ban me lol).
The dev said it was a DT(device tree) bug and that the fix wud take time.
And since there was more trolling than development happening in that group, I exited it.
Once it boots, it wud probably be posted under roms, so no need to join that toxic group as of now

GuruPrasadAH said:
Actually, one guy Daniel on telegram built a crdroid 11 rom(not gsi) for m21, however last I checked, it did not boot and booted into fastboot(pls don't ban me lol).
The dev said it was a DT(device tree) bug and that the fix wud take time.
And since there was more trolling than development happening in that group, I exited it.
Once it boots, it wud probably be posted under roms, so no need to join that toxic group as of now
Click to expand...
Click to collapse
Thanks bro, t.me is crazy with bots monitoring everything. Its not very secure as per me coz it downloads unwanted things to our device. It feels like as if soviet kgb is watching every group we join LOL.

I just wanted to say that if you're in android 11, you can flash the GSI image directly to system. Use TWRP 3.5.1 v3
Wipe data ( If you want to decrypt internal storage, flash multi disabler and format data )
Flash GSI
Flash dmverity disabler or magisk

Fredin_ said:
I just wanted to say that if you're in android 11, you can flash the GSI image directly to system. Use TWRP 3.5.1 v3
Wipe data ( If you want to decrypt internal storage, flash multi disabler and format data )
Flash GSI
Flash dmverity disabler or magisk
Click to expand...
Click to collapse
Hi Fredin bro, long time ..how you been? Youre the most helpful nice guy in t.me
My Redmi Note 10 came with MiUi 12.5.1 Android 11 out of the box, in these two months that ive been using Nebrassy2-Twrp and its different than Soulr344-Twrp, (Soulr344-Twrp 'super ' command = Nebrassy2-Twrp '#su' command), I couldnt flash GSIs using ( TWRP-3.5.2-mojito-Nebrassy-2.img ) so far.
Ive requested Soulr344 dev to make Soulr344-Twrp for RN10 Mojito/Sunny. If he ever drops by XDA perhaps he might notice.