hello, I'm not box so I connect my Chromecast sharing data on my phone. but it does not work if I disable the 4g of my phone, chromcast goes in search of network.
If I install Euroka I could connect without internet to broadcast movies that I already have on the phone?
thanks hoping to have been pretty clear with google translation
Edit. just disable the 4g when the screen is connecte it's ok.
Related
Hi there,
I got a problem which I would like to share with you. When using skype with a GPRS conn, the program do not initiate a connection. If it is using WiFi, then it works with no problems. If I have initiated a GPRS conn with some other program, i.e. browsing with my opera browser, then skype connects with no problems to the allready initiated GPRS conn. What can cause this?
Thanks in advance.
skype over gprs?
would this even work, skype needs a broadband speed connection to work and skype do not support calls over gprs, maybe this is why
Skype will only work over wifi or 3G, it will not work over GPRS.
Radeon123 said:
Skype will only work over wifi or 3G, it will not work over GPRS.
Click to expand...
Click to collapse
3G or HSPDA - just the same. Skype do not initiate any conn. To be able to log in I must, at first, start a browser, open a page, keep the conn alive and then to log in with Skype
When you first ran it, did you set it to only connect on WiFi?
Log into Skype, then go to Menu > Settings
Scroll down to Connection
In Connection Method, does it say WiFi and 3G, or Use Wifi only?
If connected using WiFi only is selected, it may refuse to initiate a 3G connection, but will happily use on if its already active.
Steve-C said:
When you first ran it, did you set it to only connect on WiFi?
Log into Skype, then go to Menu > Settings
Scroll down to Connection
In Connection Method, does it say WiFi and 3G, or Use Wifi only?
If connected using WiFi only is selected, it may refuse to initiate a 3G connection, but will happily use on if its already active.
Click to expand...
Click to collapse
Yes, I have selected both WiFi and 3G and I see the screen warning me that Skype is going to use a 3G conn. The problem is that Skype do not initiate any conn, just use any if it is already initiated. WiFi conn is switched on manually by the user, not Skype. Same is with 3G - it must be initiated previously from some other program and Skype just uses it. Further more, if 3G conn is closed while using SKype, then Skype can not initiate it again. All this is too strange for me. I uninstalled Skype, deleted all files connected with it, checked registry for strings that might be in use from Skype, then installed it again and nothing changed. I have no other installed programs for handling internet connections, just those that come built in with my PPC.
I had this problem with another program that wouldn't initiate the connection. I checked my connection settings, and it was set to automatically dial MEdia Net (since i use AT&T) and I switched it to automatically dial My ISP GPRS and ever since, my programs have been dialing fine.
hey man i had the same issues i went in to conection settings and changed them to media net becouse thats what i use thats in conections then conections advanced select networks i also disabled my proxy in conections 2 and it worked for me dont know witch one of those did it for me but that should get you in the right direction
Yeah, you have to select media net as default, and disable the proxy.
The proxy is the one that's preventing you from connecting. Other programs figure it out but some don't bother and can't connect.
hey sorry if i'm hijacking ur thread but
I was curious if anyone knows about this. I'm not using a 3g connection as well. My skype gives me the option of using a "cellular" connection, but it doesn't show it connecting to my edge or gprs. I was curious as to whether anyone know if it's edge or gprs? (trying to find out if it's using minutes or whatever.. a connection besides edge n grps)
Thanks for your time
Hi, I got my TyTNII (kaiser) on saturday and have just managed to sort out the wireless client at work.
I don't get free bandwidth from Orange so don't really want to be using my Orange web connection when I am actually connected to wifi at work. How can i set my phone to use wireless when it is connected rather than trying to open even more connections? Its really annoying as it keeps checking my email accounts and using HSDPA to do so.
Internet Explorer wont even use the Wifi
what use is a phone with wifi if it wont actually use the wifi to access the internet?
Could someone point me at the settings. There must be a setting somewhere to get it to use the connection!
marksweb said:
Internet Explorer wont even use the Wifi
what use is a phone with wifi if it wont actually use the wifi to access the internet?
Could someone point me at the settings. There must be a setting somewhere to get it to use the connection!
Click to expand...
Click to collapse
I have had no problem using WiFi with IE or any other browser. I always connect to my router via Comm Manager first (enable WiFi) and then open IE or another browser and surf the net.
Just click on the network card tab when setting up wifi and make sure that the card is set to connect to "the internet".
Your device will use a valid wifi connection if its available (before trying gprs/3g)
You may also try installing a CAB called "NoData" or "KasierTweak" that will allow you to temporarily disable data services other than your Wifi. This is what I use since I am not on a data plan (yet) with AT&T.
unwired4 said:
Just click on the network card tab when setting up wifi and make sure that the card is set to connect to "the internet".
Click to expand...
Click to collapse
ah yeah - just found this - it was set to 'work' simply because its my connection at work. obviously WM counts that has being different to 'the internet'
seems okay now.
Thanks for the help
If you have an active wireless connection, it will automatically use that connection instead of your data connection regardless.
every time i try to go to my shared folders on my pc (local network) my htc is trying to enable 3g or gprs connection. it looks like i can't browse my local network using wifi but internet works great.
every time i connect to wifi i turn wifi on and 3g off
could u tell me what am i doin wrong?
is there any way to browse my lan using wifi connection?
am i missing an extra software?
thanks in advance.
anyone...
please...
settings>connections>connections>advanced>pick network
pick my network setting or what ever the name the non my isp setting
have on your device
is what i do when i want to make sure my pda use the bluetooth connection rather then cellphone
thank U...
hi, i just gota lumia 635 to play with and i wondered is there anyway i can have it use bluetooth for its data connection. i have a nexus 5 as my main phone and i can share its mobile data connection via bluetooth easily to my nexus 7. is there anyway i can do the same to share its data connection to the lumia? the lumia seems to be able to share its data connection but i can seem to get it to use bluetooth to use the N5 connection.
please help, im brand new to wp8.1 and have no idea what im doing with it yet.
http://www.windowsphone.com/en-us/how-to/wp8/connectivity/share-files-over-bluetooth
dxdy said:
http://www.windowsphone.com/en-us/how-to/wp8/connectivity/share-files-over-bluetooth
Click to expand...
Click to collapse
while i thank you for the input i wanted network data connection, not the transfer of files. ie i want to tether the lumia to a nexus sharing its data connection over bluetooth rather than wifi.
sorry i not realize post wrong link
http://www.windowsphone.com/en-us/how-to/wp8/connectivity/share-my-connection
To use the shared data connection over Bluetooth, the device you're using must support the Bluetooth Personal Area Network User (PANU) role. To find out if your Bluetooth device supports this, check the documentation that came with it or check the manufacturer's website. To learn more about Bluetooth personal area networks (PAN) in general, check out the Microsoft Windows website.
Pair your phone with the Bluetooth device and connect to it over Bluetooth.
In the App list, tap Settings Settings icon > Internet sharing.
Tap Share over, and then tap Bluetooth.
Set Sharing to On Toggle On icon.
again i thank you but im trying to share the connection the other way around. i dont think its possible but hoping ive just missed something.
Hey guys,
I'm gonna be moving into a new apartment in a couple days and will not have WiFi until march (thanks TWC :crying.
I know about the guest mode that lets your friends locally connect and cast, my question is can I do this without having a "parent" WiFi connection? Like can I use LTE to stream netflix through the Chromecast from my phone WITHOUT having a router at all?
I can connect to the internet/update it at my parents before I leave if that matter at all.
Thanks in advance !
Yes. Set up wifi hotspot on your phone and connect to it.
herp, didn't even think of that. Thanks for the prompt response
Didn't want to start a new thread. For some reason, I can't get to see the cast icon when not on wi-fi. Guest mode is enabled and I can see the shared pin on the TV, but my phone (LG G3) just doesn't want to cooperate. I'm running 5.0.1 on it and it works just fine on wi-fi, but not when LTE is enabled.
Any ideas? Thanks!