Hi guys, so I was looking for some controllers for my Tencent Rog II because the Kunai is not out yet. I ended up buying Beboncool Saitake 7007x gamepad and Flydigi Wasp 2 gamepad. Both of these gamepads worked well with my Pocophone F1, but when I use them on ROG II, the phone see them as mouses not a controller, I can map my keys but when I press the buttons nothing happen. I also enabled USB Debugging before connect them. Does anyone have the same issue? I did googled a bit and someone said you need to have root, still, no straight answer.
Any advices will be much appreciated
Thank you for reading :fingers-crossed:
Won't work. I'm not sure if it has to do with Asus game genie but any 3rd party control that uses an overlay will not work. Unless I'm missing something in my tests it does not register at all.
Choose classic mode
I have tried a Flydigi wee2, wee2T and Apex. They all do NOT WORK on the ROG phone 2 while working fine on other phones including the ROG 1.
It just makes a mouse cursor appear and is calibrated wrong too of where it touches.
If we can figure out how to disable mouse mode for the ROG phone 2, then maybe we can get these to work.
They can only work in native based controller games that have support baked in aka classic/native mode. They do not work in games that will need mapping aka flashplay mode. So in other words we can play NO games that need to be mapped with these controllers.
We need a fix from Flydigi or ASUS. if not we are s**t out of luck and have to figure something ourselves.
dungnghien said:
Choose classic mode
Click to expand...
Click to collapse
Yes this is the solution - use classic setting after activation you may need to restart the gamepad as well - sometimes i have problems detecting the gamepad properly a phone restart will require by then also make sure your airtriggers are off so the program wont be confused this will cause issue on flydigi app.
Is there a way to switch to classic mode without having to wipe on ww?
fourleaf279 said:
Hi guys, so I was looking for some controllers for my Tencent Rog II because the Kunai is not out yet. I ended up buying Beboncool Saitake 7007x gamepad and Flydigi Wasp 2 gamepad. Both of these gamepads worked well with my Pocophone F1, but when I use them on ROG II, the phone see them as mouses not a controller, I can map my keys but when I press the buttons nothing happen. I also enabled USB Debugging before connect them. Does anyone have the same issue? I did googled a bit and someone said you need to have root, still, no straight answer.
Any advices will be much appreciated
Thank you for reading :fingers-crossed:
Click to expand...
Click to collapse
beboncoll saitake 7007 and flydigi wasp 2
Can it fit to the size of rog phone 2?
ryuseidatr said:
beboncoll saitake 7007 and flydigi wasp 2
Can it fit to the size of rog phone 2?
Click to expand...
Click to collapse
Only the wasp 2 fit the ROG II even with a case on. The saitake sadly will not fit nor work
I using APEX flydigi and success play with key map. First you must select classic mode then use the dongle provide by flydigi, plug-in the dongle to the power adapter then connect the dongle to the asus rog phone 2. Finish setup using dongle, you can pull out the dongle from the phone and start to key map..
And this works 100%? Does classic mode disable air triggers? Me people say it's just a theme.
thugsta1 said:
I have tried a Flydigi wee2, wee2T and Apex. They all do NOT WORK on the ROG phone 2 while working fine on other phones including the ROG 1.
It just makes a mouse cursor appear and is calibrated wrong too of where it touches.
If we can figure out how to disable mouse mode for the ROG phone 2, then maybe we can get these to work.
They can only work in native based controller games that have support baked in aka classic/native mode. They do not work in games that will need mapping aka flashplay mode. So in other words we can play NO games that need to be mapped with these controllers.
We need a fix from Flydigi or ASUS. if not we are s**t out of luck and have to figure something ourselves.
Click to expand...
Click to collapse
Dear.
Dear. Do u have a solution for this case
Thanks.
dungnghien said:
Choose classic mode
Click to expand...
Click to collapse
How to choose classic mode
https://www.androidinfotech.com/asus-rog-phone-2-android-10-stock/
flash this rom,then your problem solved
fourleaf279 said:
Hi guys, so I was looking for some controllers for my Tencent Rog II because the Kunai is not out yet. I ended up buying Beboncool Saitake 7007x gamepad and Flydigi Wasp 2 gamepad. Both of these gamepads worked well with my Pocophone F1, but when I use them on ROG II, the phone see them as mouses not a controller, I can map my keys but when I press the buttons nothing happen. I also enabled USB Debugging before connect them. Does anyone have the same issue? I did googled a bit and someone said you need to have root, still, no straight answer.
Any advices will be much appreciated
Thank you for reading :fingers-crossed:
Click to expand...
Click to collapse
you need to install flydigi game centre app from playstore
Related
I am using the official Motorola otg cable and trying to map buttons in snesoid but while the directional buttons map normally when I try to map the regular face buttons it just says unknown. I have the same experience with a ps3 controller and a 360. Does anyone have insight on this?
Sent from my Nexus One using XDA Premium App
I had a similar issue with two wiimotes with CCs attached. Some of the keys mapped as "unknown" but they did actually work ingame. Try mapping them all without worrying about the unknowns and see if it works.
Have exactely the same problem here, and keys dont work either exept for the direcional DPAD input. Any advice?
XSJoJo said:
Have exactely the same problem here, and keys dont work either exept for the direcional DPAD input. Any advice?
Click to expand...
Click to collapse
I'm experiencing the exact same situation, I've tried with a 360 controller, ps3 controller, and a plain logitech ps3 still usb controller that the system won't even recognize. main reason i got the otg cable was for this functionality, oh well. btw are you rooted? which method did you use to upgrade to 3.1? do you have the 3G xoom or wifi only?
Hey there,
Got a wifi.
Found out that the problem is just emulator specific, in the N64 and one PSX emulator the controller works as described.
When using fpse it works perfectly and I can play games without any problems: in the Settings it tells me the key number (192 for example) instead of unknown. Must be some kind of problem in the app-key handling I think.
Tried to change the keyboardlayout of the Controller, but I cant get it to work with the other emu's.
Regards
it's there any way to map de directional buttons (cross) and the analog stick in the same setting??? there are games that are unplayable without the directionals buttons and the analog stick at the same time for example brave fencer musashi(psx) or vagrant story and any game that use the dualshock control
Hello XDA Community!
I own a rooted Samsung Galaxy S3 i9305 (Android 4.4.4). When I connect my xbox 360 controller with an OTG cable, nothing happends. I've tried to connect it before I start a game and while in game. It only starts blinking and nothing else happends. I can connect a keyboard/mouse to my OTG cable and it works like a charm. Is this a common problem? Can I fix it somehow? I've tried to follow some post which led me to download .kl files which I put in /system/usr/keylayout but it didn't change anything. I really want this to work.
Is there noone with any knowledge about this problem?
Hello. Your phone may not be powerful enough like a tablet to be able to run Xbox 360 controller.
And most of the game will support this out of the box without configuring like on PC games.
kachan64 said:
Hello. Your phone may not be powerful enough like a tablet to be able to run Xbox 360 controller.
And most of the game will support this out of the box without configuring like on PC games.
Click to expand...
Click to collapse
Well, in this video you can see it works with the i9300, I have the i9305.
https://www.youtube.com/watch?v=lrZ-xnzYVLA
And I can see my controller show up and read button activity inside "USB/BT JoystickCenter GOLD".
Basicly I think the controller communicates with my phone, but my phone doesn't understand since it's missing something?
Yes it's funny as I also got the samr model as you. Did your controller flashed rapidly like mine did? Left/Right bumper should swipe to different pages and the d-pad should select the icons you work. This didn't work either.
Try a Bluetooth controller maybe?
kachan64 said:
Yes it's funny as I also got the samr model as you. Did your controller flashed rapidly like mine did? Left/Right bumper should swipe to different pages and the d-pad should select the icons you work. This didn't work either.
Try a Bluetooth controller maybe?
Click to expand...
Click to collapse
Mine flashed rapidly (like they always do.) and my problem is also that my bumpers doesnt swipe pages or select any icons. I have no bluetooth controller and I can get x360 controller to work with apps, such as USB/BT Joystick Center GOLD. But I dont want that, I need "native support" or w/e you want to call it. I want it to work with limelight to play games.
Hey guys.
trying to get an xbox one pad working on the tab s2 for my kids to play emulators.
no joy so far...
... is this actually possible yet?
I don't know, if this is possible, but I use the Asus Gamepad that is made for the Asus Nexus Player. It works fine on all my android devices.
Hope my english is good enough...
LordHelmchen89 said:
I don't know, if this is possible, but I use the Asus Gamepad that is made for the Asus Nexus Player. It works fine on all my android devices.
Hope my english is good enough...
Click to expand...
Click to collapse
your english is perfectly fine dude.
didnt really wanna spend more cash on another pad.
i have 4 xbox one pads and also a microsoft wireless adaptor, a couple of wii pads and 2 x ps3 pads knocking about. ps3 pads have borked batts tho.
something amongst that lot must work?! :crying:
If you really wanna use your Xbox One Controller, you can use an otg-adapter to plug in the wireless-adapter of your controller. If this doesn't work for you, you have to root your device and set up the controller via an extra app. An easier way to play emulator games on your tablet is using your smartphones as bluetooth controller. For this method you don't need to root your phone. Just load the app "BT Controller" via Playstore on your phone and your tablet and follow the instructions to connect them via bluetooth and easiely setup the buttons layout. You can set up 4 smartphones as controller at the same time
Hope i could help you
LordHelmchen89 said:
If you really wanna use your Xbox One Controller, you can use an otg-adapter to plug in the wireless-adapter of your controller. If this doesn't work for you, you have to root your device and set up the controller via an extra app. An easier way to play emulator games on your tablet is using your smartphones as bluetooth controller. For this method you don't need to root your phone. Just load the app "BT Controller" via Playstore on your phone and your tablet and follow the instructions to connect them via bluetooth and easiely setup the buttons layout. You can set up 4 smartphones as controller at the same time
Hope i could help you
Click to expand...
Click to collapse
the tab s2 is rooted.
i have tried it with OTG, wired and using an adaptor.
the tab sees the controller when its wired using the USB/BT joystick centre but thats as far as it goes, no key presses on the pad register.
i havent tried to use my phone as a controller, that kinda defeats the object tho', i may as well just use the tablet screen.
ok,
so it seems Play station pads with OTG function flawlessly.
bubble bobble here we come!!
baron von bubba said:
ok,
so it seems Play station pads with OTG function flawlessly.
Click to expand...
Click to collapse
I can confirm this; I use a Playstation 3 controller via OTG and an adapter regularly. I always start the Sixaxis app whenever I do, but not sure if I need to... I haven't even tried using it with blutooth, but it's an easy way to switch the IME to the controller.
Hello.
I recently purchased a P30 Pro 512GB (Model VOG-L29 Build Number: 9.1.0.124(C431E4R2P2) GPU Turbo) and wished to try some games using a physical game controller.
As I had a PS3 game controller and an OTG cable I thought that would be an easy (and cheap) solution. I understand that I wouldn't be able to connect via bluetooth without root, but I should be able to use it via cable?
However only half of the pad works (left analogue and a couple shoulder buttons), I installed Game Controller KeyMapper from the play store to check and it appears that every other button is returning Key Pressed = 0
I unplugged the cable and tried this setup on my Huawei P10 Plus and it worked perfectly.
Could anyone suggest reasons for this issue and possible work around?
larrytango said:
Hello.
I recently purchased a P30 Pro 512GB (Model VOG-L29 Build Number: 9.1.0.124(C431E4R2P2) GPU Turbo) and wished to try some games using a physical game controller.
As I had a PS3 game controller and an OTG cable I thought that would be an easy (and cheap) solution. I understand that I wouldn't be able to connect via bluetooth without root, but I should be able to use it via cable?
However only half of the pad works (left analogue and a couple shoulder buttons), I installed Game Controller KeyMapper from the play store to check and it appears that every other button is returning Key Pressed = 0
I unplugged the cable and tried this setup on my Huawei P10 Plus and it worked perfectly.
Could anyone suggest reasons for this issue and possible work around?
Click to expand...
Click to collapse
HI I was wondering if you ever found how to make your controller work? I m having the same problem on a honor 8x, it used to work perfectly and recently only my left joystick seems to respond
Have you guys found a fix for this problem? I have the same problem like you on my Mate 20 Pro. My Ps3 controller works on any phone except my phone.
Now the big problem for me is: When connecting the "Flydigi wasp 2" device to ROG 2 then Airtrigger doesn't work, does anyone know to help me?
I'm issues where my wasp 2 doesn't work at all in calibration but on my pixel 2 it works fine.
Yeah any thing that uses an overlay isn't going to work. I'm assuming this is because they want only the kunai gamepad to work. I've tried flydigi, benbacool a d muja controllers. And none work on rog phone 2. But work fine with other devices.
Cammarratta said:
Yeah any thing that uses an overlay isn't going to work. I'm assuming this is because they want only the kunai gamepad to work. I've tried flydigi, benbacool a d muja controllers. And none work on rog phone 2. But work fine with other devices.
Click to expand...
Click to collapse
Interesting, I wonder what app is causing this issue then. Because my issue is the key mapping part it just breaks down, even though a lot of the other button works besides the a button, so you can't go through the key mapping optimization.
So I can confirm the Wasp 2 does work but only in classic mode, which for some reason disables the airtriggers like the OP suggested. Like Cammarratta it seems airtriggers has problems with the other overlays and they conflict with one another.
How did you make it work?
SladeNoctis said:
So I can confirm the Wasp 2 does work but only in classic mode, which for some reason disables the airtriggers like the OP suggested. Like Cammarratta it seems airtriggers has problems with the other overlays and they conflict with one another.
Click to expand...
Click to collapse
Hi how did you do it I have rog phone II what settings have you changed?
I have tried a Flydigi wee2, wee2T and Apex. They all do NOT WORK on the ROG phone 2 while working fine on other phones including the ROG 1.
It just makes a mouse cursor appear and is calibrated wrong too of where it touches.
If we can figure out how to disable mouse mode for the ROG phone 2, then maybe we can get these to work.
---------- Post added at 02:47 PM ---------- Previous post was at 02:42 PM ----------
They can only work in native based controller games that have support baked in aka classic/native mode. They do not work in games that will need mapping aka flashplay mode.
Open the flydigi app and sync your controller then press the button on the app near the connected controller to switch modes. This is the only way for now unfortunately. We need a fix from Flydigi or ASUS. if not we are **** out of luck and have to figure something out on our own.
I was using the wasp2 on my galaxy s9, after I finish playing I tried to connect the controller and it's not being connected through the flydigi app, the controller name has changed to mdr-1abt, no progress afterward
itz working or not
i will buy but i didn’t now itz working with asus rog 2 or not ?
The mapping window has disappeared from cod mobile on my ROG 2 any idea how to get it back?
Bluetooth wasp 2 pro
Mwanzo said:
I was using the wasp2 on my galaxy s9, after I finish playing I tried to connect the controller and it's not being connected through the flydigi app, the controller name has changed to mdr-1abt, no progress afterward
Click to expand...
Click to collapse
Sorry to come here after so long, but I have the same problem, my bluetooth only appears MDR-1ABT.
Did you find a solution for that?