FULL INSTALLATION GUIDE OF LINEAGE 13.0 IN HUAWEI P7
Requirements
1. Data transfer cable
2. A laptop or desktop pc
3. Huawei P7 (obviously :silly
4. All the files i'll leave as the guide progresses
Observation:
I'm not responsible for you doing the wrong steps and bricking your phone. If you pass look for a tutorial on Youtube to fix it. Without further ado, let's get started.
STEPS IF YOU ARE IN EMUI 3.1 B8XX – ANDROID 5.X.X WITH THE BOOTLOADER LOCKED:
1). The first step is to back up all your data including pictures, songs, photos, documents, and so on a USB or on a pc.
Once we have backed up all personal data we proceed to download the rollback, this file will help us to return to Android version 4.4.2.
Link: https://bit.ly/2CMwg45
2). After downloading we unzip it and pass it to the phone (if you are already on the phone unzip it with some app, just search the Google Play "unzip files" and ready), more specifically in the internal storage or in a folder called "dload" (if you don't have any folders like that, create it and place the file there).
We go to the EMUI 3.1 update app (or directly in the phone settings), and select Local Update, after doing so let the phone restart and install the roll back.
In some cases when the rollback is being installed and goes by 95% will say it failed, do not give greater importance to that message and restart the phone manually. One sign that the rollback worked properly is by observing that when the phone starts doing its power animation (bootlogo) the lower message that says "Powered by ANDROID" will no longer appear.
SO YOU SHOULD SEE THE STARTUP ANIMATION AFTER YOU HAVE INSTALLED THE ROLLBACK
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT TO DO AFTER YOU HAVE INSTALLED THE ROLLBACK?
3). Once the phone has turned on we proceed to download the B609 version, we will leave it in the "dload" folder of the internal or external memory and install it in the same way we did with the rollback.
Note: If your "dload" still contains the rollback file, delete it and leave only the B609 file.
Link: https://bit.ly/2Oz88q2
In some cases when the percentage of the installation goes by 95% it will say that it failed, but once again we will not pay attention to it and restart the phone manually.
Once the phone is switched on, it will tell us that the data partition will not work and that it is time to format the phone, we will select the format option and again the phone will restart and start charging.
As I said before, it may be that by formatting an error, but we will not pay attention to it, we restart the phone manually and configure it.
4). Once configured we will notice that in the notification tray there is no message related to the Android version is Beta, IF IT HAPPENS this they have to download the following file and install it as the previous ones.
If it does not happen they skip this step.
Note: if your “dload” still contains the B609 file, delete it and leave only the file that is used to correct this. (MANDATORY IF YOU HAVE THAT NOTICE IN THE NOTIFICATION TRAY worth the redundancy)
Link: http://bit.ly/2FME1IS
5). After having configured it, we will download the B621 version (unzip it) and proceed to leave it in the “dload” folder of the internal or external memory, installing it as we did with the rollback or the B609.
Note: if your “dload” still contains the notification fix file, delete it and leave only the B621 file.
Link: http://bit.ly/2Wzm5rr
6) .After having installed the B621, the next thing we will do is download the KingRoot from the browser. I will leave the link in case you don't want to download virus.
Link: http://bit.ly/2U5VZiu
7). Once the KingRoot is installed, we tell it to root us, after the procedure is finished, we restart the phone and go to “about the phone” there we look for where it says “Build number” and press it often until it appears We are already developers.
8). We return and enter the developer options, once there, we look for the option that says “USB debugging” and activate it, in doing so we take the data cable and connect the phone to the PC and download the following program (PC).
Link: http://bit.ly/2V7h7RL
9). We decompress it and open the file that says “Get_bootloader_code”, once opened it will show us the following interface.
10). Press the "4" key on our keyboard and press "enter", the following will appear.
11). Again we press “enter” and a window will appear on the phone saying that “ADB programs” wants to get the benefit of a super user. We grant you the permits and then the advantage will appear in the bootloader code.
12). We copy it to a notebook and then turn off the phone and without disconnecting it from the PC, press the "volume -" keys and the power button.
If we did all the steps correctly when the phone turns on in download mode the phone will say “Phone Unlocked”
13). If you tell us this we can restart the phone in the normal way, and with root we go to the G Play and install Flashify and grant super user permissions.
14). We go to the "backup" tab and make backup of the kernel and recovery stock.
15). We go to the G Play and look for the “EFS backup” application and install it, we make a backup copy of the IMEI.
16). Once having these backups we pass them to the PC to have them safe.
17). Between almost the last steps we go to the following link and download the TWRP 3.0.3
Link: http://bit.ly/2HR2iA6
18). We leave it anywhere on the phone and unzip it.
19). Once decompressed we go to Flashify and select the option to install recovery, we look for the file where we would have saved it and flash it.
20). Already with the TWRP installed we make sure that if it is installed by getting into recovery mode (look for a tutorial on how to enter recovery mode on Huawei devices)
21). If everything works correctly, if not, go back to point 19.
2. 3). Once selected you will understand that there is a small iPhone-style button to slide, we will slide it and we will be in front of the TWRP interface
24). We go to the "backup" option there we check the boxes "system, start and cust" then slide the iPhone style button and wait for the proper backup.
25). We return to the main interface, we give it "restart" and then "system" and wait for the phone to turn on.
26). Once on we connect the phone to the PC and go to the internal memory, once there we look for a folder called “TWRP” we copy it to any part of the PC and it is YOUR decision to delete it from the phone.
27). Download the file of the rom Lineage 13.0
Link: http://bit.ly/2CMzTqt
28). Once the file is downloaded, we pass it to the phone and leave it on a route that is easily accessible.
29). We go back to recovery mode and we go to the "clean" option and slide the iPhone style button.
30). Once cleaned, we return to the main interface and go to where it says "install"
31). Once there we look for the folder where we leave the downloaded Lineage file, and select it.
32). After selecting we slide the iPhone style button and let it load
Note: This process usually takes a long time, DO NOT RESTART the phone until it vibrates and a “restart” button appears, when it appears we give it and if you see a button to slide once more, we click on “do not install” and wait to restart the phone
READY! The phone should turn on correctly and should show the new Lineage interface.
You can now configure the phone and restore everything.
IF YOU ARE IN ANDROID 4.4.2 IN VERSION B6XX AND YOU HAVE THE BLOCKED BOOTLOADER START THE GUIDE FROM POINT NUMBER 5.
IF YOU ARE IN ANDROID 4.4.2 IN THE EMOTION VERSION 2.3 WITH THE BOOTLOADER BLOCKED, START FROM POINT NUMBER 5.
IF YOU ARE IN ANDROID 5.1.1 IN VERSION B8XX WITH THE UNLOCKED BOOTLOADER AND WITH ROOT, START FROM POINT NUMBER 13.
I'm sorry for my English. I hope you find this guide useful.
ROM developer: Kostyan_nsk - https://forum.xda-developers.com/member.php?u=6152035
Original Post of the ROM: https://forum.xda-developers.com/as...rom-lineageos-13-0-huawei-ascend-p6s-t3879236
Update: 28/10/2019
I got P7 L10 B623 EU with Android 4.4.2 (EMUI 3.0).
I can't skip bootloader status check, I have to buy dc-unlocker coupons to unlock it.
Locked bootloader = no root. It seems that it is different than while on Lollipop already.
Free bootloader unlock was banned in 2018 by Huawei.
Besides most people report bugs, lags and other issues on original Lollipop 5.x with this phone.
I cant find any succesful report about upgrading Huawei P7 with blocked bootloader. So what are the advantages while using Lineage 13 on this phone, because it sounds strange. More details please.
whiteindian said:
I got P7 L10 B623 EU with Android 4.4.2 (EMUI 3.0).
I can't skip bootloader status check, I have to buy dc-unlocker coupons to unlock it.
Locked bootloader = no root. It seems that it is different than while on Lollipop already.
Free bootloader unlock was banned in 2018 by Huawei.
Besides most people report bugs, lags and other issues on original Lollipop 5.x with this phone.
I cant find any succesful report about upgrading Huawei P7 with blocked bootloader. So what are the advantages while using Lineage 13 on this phone, because it sounds strange. More details please.
Click to expand...
Click to collapse
I tell you, exactly about the locked bootloader I left a file that only serves exclusively to unlock the bootloader to P7, as for what, without the unlocked bootloader, root cannot be done, it is not so, it can be achieved.I know that many people have problems with Android 5 on P7, but in my personal situation, I installed Lineage 13 on my P7, successfully, so I decided to make this guide that can be long.but I explain exactly what I had to do because there is no tutorial on YouTube that shows it, so I did this written tutorial for the community. You only have to follow the steps to the letter if you do not want the phone to be damaged, and Lineage has some advantages over Huawei EMUI. Sorry for just answering this post.
Edit: If you need Android 5.0.1 on your P7 to be able to do the same procedure, tell me. I don't remember if I left download link to upgrade to Android 5.0.1 based on EMUI.
You have to buy 4 credits to unlock the bootloader in 2019. Now I got rooted phone.
It is impossible to unlock bootloader different way and you have to keep your code to use it with fastboot mode at any time.
If you already rooted you can unlock bootloader and go back to B621 with it https://forum.xda-developers.com/ascend-p7/general/guide-how-to-unlock-bootloader-p7-l10-t3879952 No idea why B621 is an initial release.
There ia an old topic with .img files supposed to be related wit changing stock Android kernel but no idea what are advantages here for stock fw https://forum.xda-developers.com/ascend-p7/general/rooted-p7-l10-609-t3003605
I got Europeand B623 with CUST C432D001 . There is an Asian version of the Lollipop with B853 and could be used on European P7's with C432D001 https://forum.xda-developers.com/ascend-p7/general/best-method-to-install-b853-european-p7-t3299829 but I don't know if it is simple to get back to stock in this case. Then we change CUST number. No idea what are advantages of Asian version and if it is simple to unlock bootloader on different region firmware.
I have to know a guide what are transition packs to make it all without issues if we get up and get back with certain upgrades.(can't find topics on xda)
- get up to Lollipop 5.1.1 and the get back to stock
- get up to Lineage project (Android 6.0) and get back to stock 4.4.2
. I think there could be more issues while not upgrading in correct order than while using a certain version of Android https://rejzor.wordpress.com/2015/12/03/update-huawei-ascend-p7-l10-to-android511/
I suppose Lineage project is the last one for this phone. Ascend P7 is a real slim 5.0" smartphone really fast for KitKat. I think a Lineage project for P7 has to be treated as an upgrade from Lollipop and its disadvantages. If its (Android 6.0) has so many crappy apps, have to find one what are the real advantages in certain situations than Lollipop. For many companies in my country Android 5.1.1 is an initial realease version (i.e. shopping).
Android 4.4.2
then B621 -> (B621 CUST fix)* -> B830 -> B839 -> B852
or*
B623 -> B852
or
B621 -> B621 CUST fix (432 to 433) -> B853
or when on Lollipop
B800 -> B621 -> B621 CUST fix -> B853
-----
So as I understand the best way now is to get into B852 and then flash Lineage
I dont know why in your guide we need to install B609, but as I had mentioned in first link Ive sent we need basically two files B621 and Rollback B800. In fact if I could choose I would install B853 but not sure if its safe when CUST failed. B853 was designed for Asia not for Europe.
downgrade to emui 2.3
SharkyBeAre said:
FULL INSTALLATION GUIDE OF LINEAGE 13.0 IN HUAWEI P7
Requirements
1. Data transfer cable
2. A laptop or desktop pc
3. Huawei P7 (obviously :silly
4. All the files i'll leave as the guide progresses
Observation:
I'm not responsible for you doing the wrong steps and bricking your phone. If you pass look for a tutorial on Youtube to fix it. Without further ado, let's get started.
STEPS IF YOU ARE IN EMUI 3.1 B8XX – ANDROID 5.X.X WITH THE BOOTLOADER LOCKED:
1). The first step is to back up all your data including pictures, songs, photos, documents, and so on a USB or on a pc.
Once we have backed up all personal data we proceed to download the rollback, this file will help us to return to Android version 4.4.2.
Link: https://bit.ly/2CMwg45
2). After downloading we unzip it and pass it to the phone (if you are already on the phone unzip it with some app, just search the Google Play "unzip files" and ready), more specifically in the internal storage or in a folder called "dload" (if you don't have any folders like that, create it and place the file there).
We go to the EMUI 3.1 update app (or directly in the phone settings), and select Local Update, after doing so let the phone restart and install the roll back.
In some cases when the rollback is being installed and goes by 95% will say it failed, do not give greater importance to that message and restart the phone manually. One sign that the rollback worked properly is by observing that when the phone starts doing its power animation (bootlogo) the lower message that says "Powered by ANDROID" will no longer appear.
SO YOU SHOULD SEE THE STARTUP ANIMATION AFTER YOU HAVE INSTALLED THE ROLLBACK
WHAT TO DO AFTER YOU HAVE INSTALLED THE ROLLBACK?
3). Once the phone has turned on we proceed to download the B609 version, we will leave it in the "dload" folder of the internal or external memory and install it in the same way we did with the rollback.
Note: If your "dload" still contains the rollback file, delete it and leave only the B609 file.
Link: https://bit.ly/2Oz88q2
In some cases when the percentage of the installation goes by 95% it will say that it failed, but once again we will not pay attention to it and restart the phone manually.
Once the phone is switched on, it will tell us that the data partition will not work and that it is time to format the phone, we will select the format option and again the phone will restart and start charging.
As I said before, it may be that by formatting an error, but we will not pay attention to it, we restart the phone manually and configure it.
4). Once configured we will notice that in the notification tray there is no message related to the Android version is Beta, IF IT HAPPENS this they have to download the following file and install it as the previous ones.
If it does not happen they skip this step.
Note: if your “dload” still contains the B609 file, delete it and leave only the file that is used to correct this. (MANDATORY IF YOU HAVE THAT NOTICE IN THE NOTIFICATION TRAY worth the redundancy)
Link: http://bit.ly/2FME1IS
5). After having configured it, we will download the B621 version (unzip it) and proceed to leave it in the “dload” folder of the internal or external memory, installing it as we did with the rollback or the B609.
Note: if your “dload” still contains the notification fix file, delete it and leave only the B621 file.
Link: http://bit.ly/2Wzm5rr
6) .After having installed the B621, the next thing we will do is download the KingRoot from the browser. I will leave the link in case you don't want to download virus.
Link: http://bit.ly/2U5VZiu
7). Once the KingRoot is installed, we tell it to root us, after the procedure is finished, we restart the phone and go to “about the phone” there we look for where it says “Build number” and press it often until it appears We are already developers.
8). We return and enter the developer options, once there, we look for the option that says “USB debugging” and activate it, in doing so we take the data cable and connect the phone to the PC and download the following program (PC).
Link: http://bit.ly/2V7h7RL
9). We decompress it and open the file that says “Get_bootloader_code”, once opened it will show us the following interface.
10). Press the "4" key on our keyboard and press "enter", the following will appear.
11). Again we press “enter” and a window will appear on the phone saying that “ADB programs” wants to get the benefit of a super user. We grant you the permits and then the advantage will appear in the bootloader code.
12). We copy it to a notebook and then turn off the phone and without disconnecting it from the PC, press the "volume -" keys and the power button.
If we did all the steps correctly when the phone turns on in download mode the phone will say “Phone Unlocked”
13). If you tell us this we can restart the phone in the normal way, and with root we go to the G Play and install Flashify and grant super user permissions.
14). We go to the "backup" tab and make backup of the kernel and recovery stock.
15). We go to the G Play and look for the “EFS backup” application and install it, we make a backup copy of the IMEI.
16). Once having these backups we pass them to the PC to have them safe.
17). Between almost the last steps we go to the following link and download the TWRP 3.0.3
Link: http://bit.ly/2HR2iA6
18). We leave it anywhere on the phone and unzip it.
19). Once decompressed we go to Flashify and select the option to install recovery, we look for the file where we would have saved it and flash it.
20). Already with the TWRP installed we make sure that if it is installed by getting into recovery mode (look for a tutorial on how to enter recovery mode on Huawei devices)
21). If everything works correctly, if not, go back to point 19.
2. 3). Once selected you will understand that there is a small iPhone-style button to slide, we will slide it and we will be in front of the TWRP interface
24). We go to the "backup" option there we check the boxes "system, start and cust" then slide the iPhone style button and wait for the proper backup.
25). We return to the main interface, we give it "restart" and then "system" and wait for the phone to turn on.
26). Once on we connect the phone to the PC and go to the internal memory, once there we look for a folder called “TWRP” we copy it to any part of the PC and it is YOUR decision to delete it from the phone.
27). Download the file of the rom Lineage 13.0
Link: http://bit.ly/2CMzTqt
28). Once the file is downloaded, we pass it to the phone and leave it on a route that is easily accessible.
29). We go back to recovery mode and we go to the "clean" option and slide the iPhone style button.
30). Once cleaned, we return to the main interface and go to where it says "install"
31). Once there we look for the folder where we leave the downloaded Lineage file, and select it.
32). After selecting we slide the iPhone style button and let it load
Note: This process usually takes a long time, DO NOT RESTART the phone until it vibrates and a “restart” button appears, when it appears we give it and if you see a button to slide once more, we click on “do not install” and wait to restart the phone
READY! The phone should turn on correctly and should show the new Lineage interface.
You can now configure the phone and restore everything.
IF YOU ARE IN ANDROID 4.4.2 IN VERSION B6XX AND YOU HAVE THE BLOCKED BOOTLOADER START THE GUIDE FROM POINT NUMBER 5.
IF YOU ARE IN ANDROID 4.4.2 IN THE EMOTION VERSION 2.3 WITH THE BOOTLOADER BLOCKED, START FROM POINT NUMBER 5.
IF YOU ARE IN ANDROID 5.1.1 IN VERSION B8XX WITH THE UNLOCKED BOOTLOADER AND WITH ROOT, START FROM POINT NUMBER 13.
I'm sorry for my English. I hope you find this guide useful.
ROM developer: Kostyan_nsk - https://forum.xda-developers.com/member.php?u=6152035
Original Post of the ROM: https://forum.xda-developers.com/as...rom-lineageos-13-0-huawei-ascend-p6s-t3879236
Update: 28/10/2019
Click to expand...
Click to collapse
Hello I used first steps to downgrade my phone from aweful B852 because it was damaged. I am now on your B621 but I want to downgrade to emui 2.3 cos I want a complete rom.please help.
By the way. How is that Lineage 13? I want something veeery smooth and fine. I can't stand bugs and low speed... . Thanks all.:good:
whiteindian said:
Android 4.4.2
then B621 -> (B621 CUST fix)* -> B830 -> B839 -> B852
or*
B623 -> B852
or
B621 -> B621 CUST fix (432 to 433) -> B853
or when on Lollipop
B800 -> B621 -> B621 CUST fix -> B853
Click to expand...
Click to collapse
I am not sure 100% if this guide is 100% good, but now I am under Lollipop with B853. I had upgraded it manullly to B852 and then OTA B853 upgrade.
Lineage 13 is still beta release you can experience many bugs. For Android 5.1.1 there are no lags and bugs (I use EU version for my region), and you can install without issues most of Google Play Store apps.
If you know how to downgrade to B621 you know how to use transition packs, and it doesnt make sense if you had damaged your phone on B852....How is it your bootloader status?
go back to original soft
I did use this tutorial and succeed with the first attempt. So thank you very much for this.
But...
I'm in need of using WPA2-Enterprise Wi-Fi connection and LOS13 isn't capable to connect. (It connects and disconnects in a loop) so .... I'd like to go back to B852 but I don't know how. I tried downloading Full ROM 852 via Huawei Finder and flash downloaded update.zip file by using TWRP but program prevents me from doing this. First error code 7 was that signatures doesn't match (By the way LOS changed model number to L7-00 from L7-10 but let's just say that it's irrelevant for now) because it check for original based ROMs:
Code:
assert(file_getprop("/system/build.prop", "ro.build.fingerprint") == "Huawei/P7-L10/hwp7:5.1.1/HuaweiP7-L10/C900B852:user/release-keys" ||
file_getprop("/system/build.prop", "ro.build.fingerprint") == "Huawei/P7-L10/hwp7:4.4.2/HuaweiP7-L10/C00B623:user/ota-rel-keys,release-keys");
assert(file_getprop("/system/build.prop", "ro.product.device") == "hwp7" ||
file_getprop("/system/build.prop", "ro.product.device") == "hwp7" ||
file_getprop("/system/build.prop", "ro.build.product") == "hi6620oem" ||
file_getprop("/system/build.prop", "ro.build.product") == "hi6620oem");
So i edited \update\META-INF\com\google\android\updater-script and simply deleted those positions but then an "apply_patch_check("/3rdmodem/modem_image/viacbp8d/boot.rom" showed up. So I believe that this isn't the proper way to go back.
Please help.
You dont need to use Huawei Finder, did you try 3-button method to force fw update?
whiteindian said:
You dont need to use Huawei Finder, did you try 3-button method to force fw update?
Click to expand...
Click to collapse
??? I have TWRP installed so using method with 3 buttons just launches TWRP
//edit
Okay, I have figured it out. I downloaded Full 852
Code:
http://download-c.huawei.com/download/downloadCenter?downloadId=73403&version=270293&siteCode=hu
Extracted .rar and then extracted update.app via HuaweiUpdateExtractor_0.9.9.5 and did flash via fastboot:
Code:
C:\adb>fastboot flash cust CUST.img
target reported max download size of 536870912 bytes
sending 'cust' (468232 KB)...
OKAY [ 20.680s]
writing 'cust'...
OKAY [ 21.900s]
finished. total time: 42.580s
C:\adb>fastboot flash recovery RECOVERY.img
target reported max download size of 536870912 bytes
sending 'recovery' (12510 KB)...
OKAY [ 0.620s]
writing 'recovery'...
OKAY [ 1.020s]
finished. total time: 1.640s
C:\adb>fastboot flash boot BOOT.img
target reported max download size of 536870912 bytes
sending 'boot' (9432 KB)...
OKAY [ 0.460s]
writing 'boot'...
OKAY [ 0.750s]
finished. total time: 1.210s
C:\adb>fastboot flash system SYSTEM.img
target reported max download size of 536870912 bytes
sending sparse 'system' 1/3 (523460 KB)...
OKAY [ 22.061s]
writing 'system' 1/3...
OKAY [ 24.650s]
sending sparse 'system' 2/3 (522666 KB)...
OKAY [ 23.140s]
writing 'system' 2/3...
OKAY [ 24.580s]
sending sparse 'system' 3/3 (429950 KB)...
OKAY [ 18.430s]
writing 'system' 3/3...
OKAY [ 20.175s]
finished. total time: 133.041s
C:\adb>fastboot reboot
rebooting...
finished. total time: 0.010s
C:\adb>
then I needed to wipe data via stock recovery (by then) due to boot loop. Then instant OTA update to 853 via system tools.
The bad news is that it didn't resolve my problem. I don't know why WPA-2 Enteprise doesn't work ; / At least it acquieres IP but then disconnects and so on...
Related
Huawei P8 Lite - Unlock Bootloader, Convert L23 to L21 and upgrade to Android 6 Official & Custom - (October 30, 2016).
IMPORTANT!
This tutorial describes the steps and necessary order to update the Huawei P8 Lite L23 or L21 to a newer version of Android. All in one tutorial to walk not looking separately each step is explained as much as I practice possible, if still do not achieve good for Re-Lean and try it as many times as necessary or ask if flat can not, if no then go for a beer and tacos, relax and try again later.
If you do not feel ready or deplano have not the foggiest idea of what arises in this best Tutorial leave your cell like this, if you also have your phone you used to what is necessary as well leave it, dedicate to research terms you do not understand Moreover, do not try to "run without first learning to walk," you're not coming back Millionnaire, or you're going back more handsome, strong, and you will be the most intelligent or interesting, or you will become immortal only by Update your phone to Android in June , so be patient, be aware and do not hasten. At the precise moment you decide to continue with this tutorial, you become absolutely responsible for what happens to your phone and your actions. Please proceed with caution and do not play the chingon.
ODYSSEY BEGINS HERE!
UNLOCK BOOTLOADER
You can get the code to unlock the Bootloader in the following ways:
Following in the footsteps of EloyGomez Video Tutorial:
PD: Add a "w" to download.
https://ww.youtube.com/watch?v=AVmAEQjOnNQ
Following the Steps of taking screenshots and a previous orientation with EloyGomez Video:
https://plus.google.com/u/0/photos/+JohnMillerDev7/albums/6305181114976401569
Using "Huawei Product ID Generator" and following the instructions (I recommend you go copying data from a notebook and save them, you never know when you can return to need):
Download "Huawei Product ID Generator" extract it where they like and run. (It is a very simple little program).
Product Model: HUAWEI Y300-0000 (selecionan that model).
Product IMEI / MEID: "Here put your IMEI / MEID".
Product ID: "Here Product ID generates them automatically according to product model & product IMEI / MEID previously placed, and which must wear on the page"
Enter the page to Unlock Bootloader Huawei, Whether the version in English or Chinese, the only thing that changes is the language. They can try with 2 pages.
Create an account so that they can log in, they can also log in with Facebook, it is very simple.
Once you have created your account and logged in, we see the page for the unlock code.
Fill the fields with the data that we requested and put the following:
Product type: Smartphone
Product model: HUAWEI Y300-0000 (If you do not work with this, try with all models that are in the generator) (Also try with CAPITALS & lowercase).
Product Serial number: They get in Settings> About phone> Status> Serial Number.
Product IMEI: They get in Settings> About phone> Status> IMEI.
Product ID: They get the "Huawei Product ID Generator" (The program that generated them a while ago).
Captcha place the page requesting them and pressed Send or Submit, you must give the unlock code for Bootloader, copy it into the notebook (which I suppose must carry).
Now Turn to Settings> About Phone and Pulsen several times on "Compilation" until muentre them the message "now are a developer" Returning to Settings and you will see the option "Developer" tab, go there, if they are not active options because the activated developer, now a little move down and activate "USB debugging".
Download the "UNLOCK HUAWEI BOOTLOADER" extract it where they like, then connect your phone to the PC and run "UNLOCK BOOTLOADER.bat" program.
And the rest is a cinch, just follow the instructions anger us indicating the program, Drivers ADB & HiSuite (At most only have to accept the terms, click next and finish) were installed, the phone will restart a few sometimes they do not worry or despair pANIC not normal will reboot.
When they unlocked the Bootloader can disconnect your phone from the PC on and off.
Now let's check that everything went well, keep pressed "Vol-" while we connect to the PC, you will see a white screen with some letters (that's the Fastboot mode), and if they see the text "PHONE UNLOCKED" because Congratulations, Make unlocked the bootloader correctly.
Hechate a beer, a soft drink, Pau-Pau or commits a loaf to celebrate, but do not get too excited because it only been the beginning, we still some way to go, but certainly this is the most important step of all, because without having the unlocked Bootloader is not at all advisable to make root the phone, install a recovery or install a custom ROM, those using KingRoot arise after them so rare mistakes and to get them to damage the phone.
OFFICIAL FOR HUAWEI UNLOCK CODE BOOTLOADER:
https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
HUAWEI OFFICIAL VERSION IN CHINA FOR UNLOCK CODE BOOTLOADER:
PD: Add a "w" to see the website.
https://ww.emui.com/plugin.php?id=unlock&mod=detail
TOOLS YOU NEED TO DOWNLOAD:
Bootloader unlock huawei:
https://mega.nz/#!uRkC2DQS!R2IMpEpUAtrDH4-Gi4VLi8Mcz5_h98jtKsBATpMBQYg
Huawei Generator Product ID:
https://mega.nz/#!eE81BbrT!_JBTy1ZCdFuYd7JwFLnaQe06I47ua__hEa4GHx6PZvM
If the PC does not recognize them the phone even after the program to automatically install the ADB drivers, then download, extract and install these, is not all that complicated should only connect your phone to the PC.
Run programs just follow the instructions and go. May need to click on Next, Finish, "Y" or "ENTER".
https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
CONVERT L21 To L23
(If you reached this step means that are already Pros .... hahaha Wes is not true, it is believed!, Read on!)
At this point what we will do first is to install the TWRP Recovery and make full Wipes in order to erase the system and leave the phone in white to make a much cleaner installation without errors. So we follow the following instructions:
PD: You can install the TWRP who like V2 or V3, the procedures are the same, just change a bit the interface.
Instructions for both versions:
Download TWRP INSTALL RECOVERY (V2 or V3) P8 HUAWEI LITE.rar
Download adb-setup-1.4.3.rar
Unzip adb-setup-1.4.3.rar and run the program. (This is for adb drivers and pc can detect the terminal is installed.)
We will see a blue screen console Type "and" or "accept" in everything and close the window. If you ask them to restart the pc, do it and go.
Begin your phone in Fastboot mode; Turn off the phone and press the "VOL" key and without releasing conectenlo to the PC until Fastboot screen appears.
Unzip "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI LITE.rar P8" and execute the file "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI LITE.bat P8" and follow the steps.
Do not take more than 5 minutes is just a matter of going press ENTER.
Turn off the phone and Start TWRP Recovery Mode (Vol + & Power) Click on WIPE, Advanced Wipe and make full wipes:
Should be marked:
Dalvik
Cache
Data
Internal storage
System
IMPORTANT !: not marques "micro sdcard".
Return to Menu, press Reboot, and then Bootloader.
Files:
TWRP V2:
https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3:
https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
ADB:
https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
After you have successfully done this, we continue to spend our L23 to L21 P8 Lite, I recommend removing your SD card and SIM Card precaution. We follow the instructions:
Downloading "FlashRom C432B052 (Lollipop 5.0, 3.1 EMUI) Dual Sim Transition" extract it where they like, Begin your phone in Fastboot mode, connect it to PC, execute the "FLASH-ALL.bat" file (not execute permissions administrator), and follow the instructions that tells the program.
You complete the process when the phone is started with the new system, if you are targeting "About phone" say "Balong". To remove that must be installed Step2.
Downloading "Step2", extract it, look for the "UPDATE.APP" file and copy it to the "DLOAD" your SD card folder if you do not have then created. (Clearly it must first insert the SD on the phone).
Then head to Settings> Updater> Menu> Update Local and selecionan the UPDATE.APP (Step2). The phone will reboot, start the installation and wait for it to finish. When you start the system and check the "About phone" no longer tell Balong but L21.
After this I recommend doing a factory reset, first remove your SD card, then go to "Settings> Security> Backup and Restore" or type in the search bar settings "Backup and Restore" click "Factory Data Reset "mark" Delete memory ", press" Reset "and wait to finish the process. If for some reason out "Failed" do not worry just restart, anyway there will reset the cel, also do not worry if you have no signal or you will not detect the SIM, that is fixed by installing the following update.
Congratulations you get past your cel L21!
Files:
FlashRom C432B052:
https://mega.nz/#!LQNimCgQ!oq2C_Gwvwv7zoigo8GR2kstPdHDO5ESJ9Qglv_2UERs
Step2:
https://mega.nz/#!vdsDEZSb!3FIgh6WNgP4NWRfnGoDxisd1wAQk3CBPKdKl8_If-v0
UPDATED ANDROID 6 Official
The update command is as follows: "B052> B170> B560> B564" or "B052> B170> B550> B560> B564"
(Compiling B560 is the most stable so far).
Being in the B052 just have to download the following Compilaciones and be updated locally via:
"B170> B560> B564" or "B170> B550> B560> B564". I recommend that for every update they make, do a factory reset to eivtar errors, this is optional in the end, I just do them the recommendation from experience.
The B170 downloaded, extract the files, copy the DLOAD UPDATE.APP folder on your SD, head to Settings> Updater> Menu> Update Local and selecionan the UPDATE.APP, the phone restarts, start the installation and wait end.
Now being in the B170, repeat the previous step to install the B550 or B560 Compilation. (Depending on the order above mentioned update, they work better or decide to take)
Now when they are on the B560 turn to the B564 but no longer appear the option "Update Local", so there are 2 options to perform the update: (and must have the UPDATE: APP previously copied to the DLOAD, the update.app always be copied to Dload no other):
Option 1:
Type the following code in the app called "* # * # 2846579 # * # *" (without quotes obviously).
Appear the famous hidden menu, click "Software Upgrade"> "SDCard Upgrade"> will leave them a message "Are you Sure" (are you sure?), Pressed OK, start the update and wait for it to finish.
Option 2:
Cel being off or on, press the (Vol-, Vol +, Power) aperezca keys until the update screen and wait to finish the process.
And that would be all, Congratulations and cell habras updated to Android in June!
If you get here it means you're half Pro.
Official Roms (Installation Via Local):
PD: Add "http:" extension links to download.
B170:
//download-c.huawei.com/download/downloadCenter?downloadId=57325&version=181091&siteCode=fi
B550:
//download-c.huawei.com/download/downloadCenter?downloadId=78426&version=312720&siteCode=es
B560:
//download-c.huawei.com/download/downloadCenter?downloadId=80469&version=319382&siteCode=pl
https://mega.nz/#!uRNRDRaA!zavgQtBakqdg_lbXmgoKwB7qotPoXOJvJofvnPlM1CI
B564:
https://mega.nz/#!aAVhkbgI!1cGtLB0HxQN0x-KeyB2MqQ3JWeGEnvD2aKll7vsCa60
UPDATED CUSTOM ROM ANDROID 6
Just click on the link, read the post and go following the instructions that you indicate. Patience and Success!
PD: Add "http" "://" "w" to see the website.
[TUTORIAL] Install Android B560 & B564 6 (Dual Sim) Custom Rom V2 - Sokkoban - (Updated July 18, 2016)
ww.htcmania.com/showthread.php?t=1188059
Rom ROM Spectre - Android 6 B560 (Dual Sim) - POST UPDATED (26 AUGUST 2016)
ww.htcmania.com/showthread.php?t=1200900
Rom ROM Phenom - Android 6 B564 (Dual Sim) - POST UPDATED (26 August 2016)
ww.htcmania.com/showthread.php?t=1220243
Rom ROM Opteron - Android 6 B574 (Dual Sim) - POST UPDATED (26 AUGUST 2016)
ww.htcmania.com/showthread.php?t=1218158
Nautilus Android ROM Rom 6 B564 (Dual Sim) - October 13, 2016
ww.htcmania.com/showthread.php?t=1241126
Rom ROM Helios - 6 B890 EMUI Android 4.1 (Dual Sim) - October 25, 2016.
ww.htcmania.com/showthread.php?t=1245909
DRIVERS EXTRAS
Here I leave some Drivers Extras to troubleshoot issues fastboot, adb, if the PC does not detect the Cell, the installation of each is very simple, just keep connected your cel to the PC, run programs, you must give "next" and then restart the PC if necessary.
Files:
https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
And that's all I hope I have been clear and supported with this Tutorial.
Greetings from Coatzacoalcos, Veracruz, Mexico! :fingers-crossed:
# SUPPORT HUAWEI P8 LITE
Huawei P8 Lite Unlock Bootloader, Convert L23 In L21, Upgrade To Android 6 Official + Install Custom Roms, Recoverys, Rootear, And Many Many Things - April 27, 2017 Updated.
IMPORTANT! This Tutorial describes the steps and order needed to Update the Huawei P8 Lite L23 or L21 to a newer version of Android. Everything in a single tutorial so that they are not looking for each step separately, It is explained as practical as possible, even if they do not do it well. Re-read and try it as many times as necessary or ask if they can not, if not As they go for a beer and tacos, they relax and try again later.
If you do not feel ready or deplaned you do not have the slightest idea of what is posed in this tutorial better leave your cell phone like this, if you have your cell phone you use for the necessary so leave it, dedicate yourself to investigate terms that you do not understand Even, do not try to "run without first learning to walk", you are not going to return Millionaire, nor are you going to become more handsome, strong, nor will you be the most intelligent or interesting, nor will you return immortal solo by Update your phone to Android 6 , So be patient, be aware and do not accelerate. At the moment you decide to continue with this Tutorial, you become absolutely responsible for what happens with your Mobile and your actions. Please proceed with caution and do not play chingon.
HERE THE ODYSEA BEGINS!
<<< UNLOCK BOOTLOADER >>>
IMPORTANT:
To know the Model Number & IMEI:
Enter Settings> About Phone.
To Know the Serial Number:
Enter Settings> About Phone> Status
To Know Product ID:
Enter this code: "* # * # 1357946 # * # *" on the telephone dial (without quotes), the number that appears, is the PRODUCT ID.
You can Obtain the Code to unlock the Bootloader in the following ways:
Following in the footsteps of EloyGomez Video Tutorial:
Https://www.youtube.com/watch?v=AVmAEQjOnNQ
---------------------------------------------------------------------------------------------------------
Following the Steps of the Screenshots having already a previous orientation with the Video of EloyGomez:
Https://plus.google.com/u/0/photos/+JohnMillerDev7/albums/6305181114976401569
Using "Huawei Product ID Generator", and following the instructions (I recommend copying the data obtained in a notebook and saving them, you never know when you may need them again):
Download "Huawei Product ID Generator", extract it wherever you like and run it. (It's a very simple program).
Product Model: HUAWEI Y300-0000 (select that model).
Product IMEI / MEID: "Here they place their IMEI / MEID".
Product ID: "Here you generate the Product ID automatically according to the Product model & product IMEI / MEID that they placed above, and it is the one they should use on the page"
Go to the Huawei page to unlock Bootloader, either the English version or the Chinese version, the only thing that changes is the language. You can try with all 2 pages.
They create an account so they can log in, they can also log in with Facebook, it's very simple.
Once you have created your account and logged in, we will see the page to obtain the unlock code.
Fill in the fields with the data that we are requested and we will put the following:
Product type: Smartphone
Product model: HUAWEI Y300-0000 (If it does not work for them, try all the models that are in the generator) (Also try with CAPITAL & lowercase).
Product Serial number: You get it in Settings> About Phone> Status> Serial Number.
Product IMEI: You get it in Settings> About Phone> Status> IMEI.
Product ID: They get it with the "Huawei Product ID Generator" (the one that generated the program a while ago).
They place the Captcha that asks them for the page and they press Submit or Submit, they must give them the Code of Unlock for the Bootloader, they copy it in the scrapbook (that I suppose they must take).
Now go to Settings> About Phone and click on "Compilation" several times until the message "now you are a developer" is muted, you return to Settings and you will see the "Developer Options" tab, enter there, if the options are not active Of developer because they activate them, now they move a little down and activate "Depuracion USB".
Download the program "UNLOCK BOOTLOADER HUAWEI", Extract where you like, then connect your phone to the PC and run "UNLOCK THE BOOTLOADER.bat".
Already the rest is eaten, just follow the instructions that will indicate the program, the ADB & HiSuite Drivers will be installed (At most, they will only have to accept the terms, press next and finish), the Telephone will restart a few Sometimes do not worry or despair do not panic, it will be normal to restart.
When they have unlocked the Bootloader they can disconnect the Phone from the PC and turn it off.
Now let's check that everything went well, we kept pressing "Vol-" and at the same time we connected it to the PC, they will see a white screen with some letters (that is the Fastboot mode), and if they see the text "PHONE UNLOCKED" Congratulations, you have unlocked the bootloader correctly.
Make a beer, a soda, a Pau-Pau or Commit a Bread to celebrate, but do not get so excited because this is only the beginning, we still have a way to go, but certainly This is the most important step of all, Since without having the Bootloader unlocked it is not at all advisable to make Root to the phone, to install a recovery or to install a custom Rom, Those that use KingRoot for that after that they appear rare errors to them and even it damages them the telephone.
---------------------------------------------------------------------------------------------------------
OFFICIAL HUAWEI PAGE TO OBTAIN THE BOOTLOADER UNLOCK CODE:
Https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
OFFICIAL PAGE OF HUAWEI IN CHINESE VERSION TO OBTAIN THE BOOTLOADER UNLOCK CODE:
Https://www.emui.com/plugin.php?id=unlock&mod=detail
TOOLS YOU SHOULD DOWNLOAD:
Unlock bootloader huawei: https://mega.nz/#!uRkC2DQS!R2IMpEpUAtrDH4-Gi4VLi8Mcz5_h98jtKsBATpMBQYg
Huawei Product ID Generator: https://mega.nz/#!eE81BbrT!_JBTy1ZCdFuYd7JwFLnaQe06I47ua__hEa4GHx6PZvM
If the PC does not recognize the phone even after the program installs the ADB Drivers automatically, then download, extract and install these, it is not at all complicated just connect your phone to the pc.
Run the programs just follow the instructions and you're done. You may have to press Next, Finish, "Y" or "ENTER".
Https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
---------------------------------------------------------------------------------------------------------
<<< CONVERT L23 IN L21 >>>
(If they already reached this step means that they are already Pros .... hahahaha not true, they believed it!, Keep reading!)
At this point what we will do first is to install the Recovery TWRP and make the Wipes Complete with the purpose of Erase the system and leave the Phone blank to make a Installation much Cleaner and without possible errors. To do this we follow the following instructions:
PS: They can install the Twrp that like V2 or V3, the procedures are the same, only slightly changes the interface.
Instructions for both versions:
Download INSTALAR RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.rar
Download adb-setup-1.4.3.rar
Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
Start your Phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
Unzip "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.rar" and execute the file "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.bat" and follow the steps.
It will not take more than 5 minutes just to press ENTER.
Turn off Cell Phone and Start in Recovery Mode TWRP (Vol + & Power), Press WIPE, Advanced Wipe and make the complete wipes:
You must dial:
Dalvik
Cache
Data
Internal storage
System
IMPORTANT !: Do not check "micro sdcard".
Go back to Menu, press Reboot, and then Bootloader.
Files:
TWRP V2:
Https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3:
Https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
ADB:
Https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Once the above is done correctly, we continue to move our P8 Lite L23 to L21, I recommend you remove your SD Card and SIM Card as a precaution. Follow the instructions:
Download "FlashRom C432B052 (Lollipop 5.0, EMUI 3.1) Dual Sim Transition", extract it wherever you like, start your phone in Fastboot mode, connect it to the PC, execute the file "FLASH-ALL.bat" (do not execute it with permissions Administrator), and follow the instructions given to you by the program.
When the process ends, the phone will start with the new system, if you go to "About the phone" it will say "Balong". To remove that you must install Step2.
Download "Step2", extract it, look for the file "UPDATE.APP" and copy it to the "DLOAD" folder of your SD Card, if you do not have it then create it. (It is clear that you must first insert the SD into the phone).
Then go to Settings> Updater> Menu> Local Update and select the UPDATE.APP (Step2). The phone will restart, the installation will begin and wait for it to finish. When you start the system and check in "About the phone" you will no longer say Balong, but L21.
After this it is recommended to do a factory reset, first remove your SD card, then go to "Settings> Security> Backup and Restore" or type in the search bar of "Backup and Restore" settings, press "Reset factory data "Check" Clear internal memory ", click on" Reset "and wait for the process to finish. If for some reason "Failed" does not worry, it only restarts, the cell will have been reset anyway, do not worry if you do not have a signal or it does not detect the SIM, that is fixed by installing the next update.
Congratulations, you've already passed your cel to L21!
Files:
FlashRom C432B052: https://mega.nz/#!LQNimCgQ!oq2C_Gwvwv7zoigo8GR2kstPdHDO5ESJ9Qglv_2UERs
Step2: https://mega.nz/#!vdsDEZSb!3FIgh6WNgP4NWRfnGoDxisd1wAQk3CBPKdKl8_If-v0
---------------------------------------------------------------------------------------------------------
<<< UPDATE ANDROID 6 OFFICIAL >>>
The update order is as follows: "B052> B560> B564> B574> B584> B594> B596> B598> or" B552> B570> B560> B560> B564> B574> B584> B594> B596> B598 ".
Being already in the B052 we only have to download the following Compilations and go updating via local:
"B552> B570> B560> B564> B594> B594> B594> B596> B598 'or' B552> B570> B560> I recommend that for every update they make, make a factory reset to avoid possible errors, this is optional after all, I only make the recommendation from their own experience.
Download the B170, extract the files, Copy the UPDATE.APP to the DLOAD folder of your SD, go to Settings> Updater> Menu> Local Update and select the UPDATE.APP, the phone will restart, the installation will begin and wait for To finish.
Now on the B170, Repeat the previous step to install the B550 or B560 Compilation. (Depending on the order of updating mentioned above, that works best for them or decide to take)
Now when they are in the B560 we go to the B564 but the option of "Local Update" will no longer appear, so we have 2 options to carry out the update: (they should already have the UPDATE: APP previously copied in the DLOAD, The update.app is always due to copying to Dload there is no other):
Option 1:
Write the following code in the calls app "* # * # 2846579 # * # *" (without quotes obviously).
The famous hidden menu will appear, click on "Software Upgrade"> "SDCard Upgrade"> you will receive an "Are you Sure" message, press OK, start the update and wait for it to finish.
Option 2:
While the Cel is off or on, press the keys (Vol-, Vol +, Power) until you see the update screen and wait for the process to finish.
And that would be Todo, Felicidades ya habras updated Your phone to Android 6!
If you've already come up here means you're half Pro.
Official Roms (Local Via Installation):
ALE-L21C432B170
Https://mega.nz/#!eYUgxbrb!yccoxiIsXjIHdiGxdP6AU05S1fYQGNNMRba427BxEgs
ALE-L21C432B550
Http://download-c.huawei.com/download/downloadCenter?downloadId=78426&version=312720&siteCode=en
ALE-L21C432B560
Http://download-c.huawei.com/download/downloadCenter?downloadId=80469&version=319382&sit eCode=pl
Https://mega.nz/#!uRNRDRaA!zavgQtBakqdg_lbXmgoKwB7qotPoXOJvJofvnPlM1CI
ALE-L21C432B564
Https://mega.nz/#!kJkESTKT!1cGtLB0HxQN0x-KeyB2MqQ3JWeGEnvD2aKll7vsCa60
ALE-L21C432B574 - 2016.07.19
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v56678/f1/full/update.zip
ALE-L21C432B580
Https://mega.nz/#!2RUgxKiI!c-RX4wJsilZuxEDFwWJ2lcO-tpC4J5Q3uGbHUo4c1Vw
ALE-L21C432B584 - 2016.11.21
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v67128/f1/full/update.zip
ALE-L21C432B586 - 2016.12.13
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v69882/f1/full/update.zip
ALE-L21C432B588 - 2016.12.26
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v72428/f1/full/update.zip
ALE-L21C432B594 - 2017.02.28
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v77344/f1/full/update.zip
ALE-L21C432B596 - 2017.03.28
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v80333/f1/full/update.zip
ALE-L21C432B598 - 2017.04.20
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v83472/f1/full/update.zip
---------------------------------------------------------------------------------------------------------
<<< INSTALL CUSTOM ROMS, RECOVERYS, ROOTEAR, AND MANY MORE THINGS >>>
I have compiled a collection of various interesting contributions to facilitate your search, so check it out!
Http://www.htcmania.com/showthread.php?t=1310020
*
<< DRIVERS EXTRAS >>
Here I leave some extra drivers to solve problems with issues of fastboot, adb, in case the PC does not detect the mobile, the installation of each is very simple, just keep your cell connected to the pc, run the programs, you have to Give it to "next" and restart the PC if necessary.
Files:
Https://mega.nz/F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
And that's it, I hope I was clear and supported with this Tutorial,
Greetings from Mordor!
---------------------------------------------------------------------------------------------------------
Empty
Im trying to use huawei product id generator but I always get this message in unlock page
I tried with c8812 and Y300-000 and all have the same results.
ALE-L21
Please make sure the verification code and model number are correct. If your device has multiple IMEIs or MEIDs, please try another IMEI or MEID.
So I have a p10, and decided to see what i could do with it. Having little experience, I managed to get somewhere. Unlocked the bootloader, got twrp, installed it with the command fastboot flash recovery recovery.img and got:
target reported max download size of 471859200 bytes
sending 'recovery' (32034 KB)...
OKAY [ 1.012s]
writing 'recovery'...
OKAY [ 0.200s]
finished. total time: 1.222s
WOOT! Awesome! No problems! Then I issued: fastboot boot recovery.img
And got
downloading 'boot.img'...
OKAY [ 1.020s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 1.030s
WTF?!
So after a bit, I misread and flashed boot.img with: fastboot flash boot boot.img
I guess I flashed the wrong image. I dunno. But now it boots into the screen that tells me "Your device is unlocked and can'r be trusted" tells me its booting, reboots, goes to the same screen again, says its rebooting again, then brings me to Huawei eRecovery. I connect to my wifi network, telling it to download the latest version and recover, and it says "getting package info failed" So I ma stuck with a device that won't boot.
Oh yes, and down volume and power don't bring me to fastboot anymore.
Begging for help here please.
Do the whole rebranding to unbrick, not sure if you flashed wrong image on boot.
Advice: When flashing recovery boot it by powering off and using key combo. Or adb command. Not from fastboot as IMG.
I did a google search on rebranding to unbrick, and found a guide on the 9. So I assume its similar. It first tests me to boot into twrp. I can't. Twrp never got installed. The next step is to get the offical firmware and put it on the SD card. I can't find it. I am in Canada, and can't find any firmware for canada, nevermind anything north american. It is however possible I have found the wrong guide, as I don't really know what I am doing. As a complete noob, links to guides would be nice when possible and available when making recommendations.
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
smariob said:
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
Click to expand...
Click to collapse
okay, i know you are trying to be helpful, but I just can't follow it...
You said "Download Update ZIP. I suggest rebrand to VTR-L29 C432 !" Which one of them? Is the B just a build number, and I should get the latest? please remember, you are talking to a noob.
You talk about 3 files, update.zip, update_data_public.zip and update_all_hw.zip Do I need them all? If so the last one, where I change filelist.xml to all /cn/update_full_all_cn.zip doesn't work. See the following link http://update.hicloud.com:8180/TDS/.../v92067/f2/full/all/cn/update_full_all_cn.zip
Also, rename the file, "Where spcseas is the model of the file you are downoloading" Huh? I know I have to replace the word spcseas with something, but with that?
Now it says to run update.bat Whats the point? I have not been directed to plug the phone into the computer, and even if I did, the computer won't recognize it because I can't get it into any mode... Where do I put these files? They all go in the same directory? I just can't follow this guide as much as I try..
THERE IS GOOD NEWS HOWEVER!
I have been able to get it into TWRP! This means I can get into fastboot, which means I can re-flash the correct boot.img, IF I can get my hands on it (and assuming that's the actual issue It likely is. It was working until I flashed this other boot.img file.). So if I can get direction on how to get it, I should be okay. Double triple and quadruple bonus points for just providing me a direct link to the boot.img file to use without having to play around trying to follow guides I can't seem to understand.
UPDATE!!
Now although I can get into TWRP, its hit and miss, but I can get there eventually, it will no longer boot into fastboot/recovery. When I click reboot, and choose bootloader in TWRP, it just freezes..
This is getting frustrating. Apparently getting into the bootloader is hit and miss, but i can do it.
Search for Huawei update extractor in order to get BOOT.IMG from update.app (inside update zip) I could upload one myself, but I'm not at home right now.
TWRP doesn't support reboot atm. You must power off completly. To boot to recovery press power on and vol + until huawei logo appears, then relase power. It should boot to recovery TWRP in this case.
For boot bootloader you press vol - when you are connecting usb cable to PC.
smariob said:
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
Click to expand...
Click to collapse
smariob said:
Search for Huawei update extractor in order to get BOOT.IMG from update.app (inside update zip) I could upload one myself, but I'm not at home right now.
TWRP doesn't support reboot atm. You must power off completly. To boot to recovery press power on and vol + until huawei logo appears, then relase power. It should boot to recovery TWRP in this case.
For boot bootloader you press vol - when you are connecting usb cable to PC.
Click to expand...
Click to collapse
Thats good to know. I was getting TWRP more often when I did it from off. What was happening was I would holds power and volume up, release power when the logo appeared, and MOST of the time I would boot into TWRP. Sometimes it would just reboot, I would continue to hold up, and it would either reboot, or boot into TWRP. Occasionally I would get the recovery that came with the phone ?!?!
In any event, I managed to get into TWRP, boot into recovery, extract the boot.img, flash it... AND IT WORKED! Phone booted!
So after all this, I backed up EVERYTHING I could using TWRP. The Boot partition, System partition, EVERYTHING! It kept failing on the Data partition, but from my research that wasn't that important anyway. I then installed SuperRoot_noverity_nocrypt.zip, rebooted, installed phh's SuperUser, installed Root Checker, and finally, I have root!!
Thank you so much for the help. About to go "thank clicking" for all the help you provided.
Just for Info
I am brick MY phone, what have i done ?
On all my phones is first doing: bootloader unlock, install twrp and rooting.
1 - i login by huawei, fill the form and return my unlock-code
2 - search twrp ( i am found ; but it was the wrong one. [i think i need new eyes])
3 - on phone : menu / 7x tip on build activate developer options / go to developer options / enable oem-unlock and enable usb-debugging
4 - usb-wire in phone and pc, on pc (linux) start terminal (the same as windows dos-prompt), type "adb devices", on phone-screen "access for develop" hook & ok
5 - adb reboot bootloader
6 - fastboot devices (connection test)
5 - fastboot flash recovery_ramdisk twrp.img
6 - fastboot reboot
7 - phone reboot in twrp (not OS)
from now, what ever i do, phone boot only in twrp BOOTLOOP
now i am search in XDA and AH (german community AndroidHilfe) "honor 9 lite bootloop" NOTHING
by random found on AH "Huawei P smart [How to Root] + TWRP - Root - Anleitung". Huawei P smart is sister from Honor 9 Lite (very helpful thread-writer on AH)
ho help : at this moment no downloads at huawei/honor 9 lite (for help i need "update.app") now i wait...
2 days later (wait is not my strength) i found FHMate10Tool. users write "this can work/cant work - test it.
i test it. on windows-pc open explorer, go to folder, right-click on FHMate10Tool.exe, "run as admin", dos-prompt open and write text from tool
usb-wire in pc and phone (phone is on)
point 1 in tool: "root phone" ; i write "1" and press enter
tool write "this rooting phone: for yes press enter", i press enter, 4..5 seconds later write tool "your phone is rootet and rebooting"
phone reboot and boot i customOS - WOH :laugh: phone configure, apps install and phone working (always inside the wrong twrp)
5 days later phone write"new update anailable! install?" "yes" and ota-update download (i think 1 hour) and write "update now" "yes"
update go to factory-update-mode (erecovery?) begins and brake by 25%, "what a hell !!!", i reboot
now the best idea from my life. i copy with es-explorer(root) from /data/update/Hwouc/... the "update.app" to my sd-card.
my phone have build 8.0.0.121, the update.app is LLD-L31 8.0.0.127(C432)FULL. This is important, the little updates not inside "system, recovery". the FULL is what i need.
start HuaweiUpdateExtractor, select update.app, settings "all hook out", extract "recovery_ramdis.img" and "system.img" (automatic extract the header-files)
now copy this 4 files to my adb-folder, phone in bootloader-mode, usb-wire pc to phone
open dos-promt, cd.. to adb-folder, check connection with "fastboot devices", connection work and the fun begins
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
NOW is custom recovery and system on phone
to clear userdata
- fastboot erase userdata (this make what you reed: ERASE)
- now boot to erecovery (usb-wire in pc and phone, vol-up and power press on phone) and make factory reset. this make low-level-format with userdata.
- reboot and phone is clean and fresh as a new phone. no twrp, no rootet. if i wish (yes) i can fresh install
only restriction at this time: twrp is beta! no full work, backup/restore system = work, backup/restore data = NOT work.
supplement
this work on my phone! on your phone? test at your owen risk
bevor twrp has full-function: attention to this point. no data-backup. everyone brake phone: you begins by zero /better begins zero else phone ded
experience
i search for LOS15.1 or RR, for this phone nothing found. i test system.img(oreo!) from other models (my risk, my phone, my fun). i test to now 5x, next test in 5 minutes
now nothing run on my phone. flash *.img, no boot to OS, the game starts from the beginning
- inserted 20180325 13:05 test not work, return to customOS
- inserted 20180325 13:40 systemOS work, SuperSU is from old install! ALL GOOD :good:
bootloader is open if: PHONE Unlocked & FRP Unlock
I hope this is helpful for your bootloop :angel:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@JamesBott flash this RR.. it will work in Honor 9 Lite..
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
@VigneshS007
thank's for your help. i test rom in next 2..3 hour. then i see is work/no work...
i think, i open new threat > "Honor 9 Lite "my test's with other rom's" <
i am german, i need "order"
if i search "bootloop" i wish find bootloop and anwer for this theme in 1 thread
what is the bootlop answer is in "new rom" ? and i don't find this thread ? that's NO good
all other nations : this is "german thinking" (for you is "can" / not "must" !!!)
is the same as comedy "you can laugh, but you do not have to" <- it's a joke
here is not the place for principle disputes, it's only my thinking and i hope you understand me
my english is only "learning by writing" and google-translating
i am now installed Telegram and look in this group
i have to tell you, i think that's a pity
xda is the world-community for android and all world-user. any user search for question's and answer's and this in xda.
i wish, the tegram-group come in to xda and all user (world) find these inside xda (my thinking !)
why: look in this forum. i feel "this is my forum" . i wish other write also here (ROMs...Development)
or is it to early ? the phone is to young / to short on market ?
How is the developer to make twrp with 100% working ? for this phone ! i donate with 20€ ! honestly! (i hope, this is incentive enough)
sorry, duplicate from #3
@VigneshS007
hi brother, please look
https://forum.xda-developers.com/9-...r-9-lite-test-devices-developer-roms-t3768950
Bootloop again
JamesBott said:
Just for Info
I am brick MY phone, what have i done ?
On all my phones is first doing: bootloader unlock, install twrp and rooting.
1 - i login by huawei, fill the form and return my unlock-code
2 - search twrp ( i am found ; but it was the wrong one. [i think i need new eyes])
3 - on phone : menu / 7x tip on build activate developer options / go to developer options / enable oem-unlock and enable usb-debugging
4 - usb-wire in phone and pc, on pc (linux) start terminal (the same as windows dos-prompt), type "adb devices", on phone-screen "access for develop" hook & ok
5 - adb reboot bootloader
6 - fastboot devices (connection test)
5 - fastboot flash recovery_ramdisk twrp.img
6 - fastboot reboot
7 - phone reboot in twrp (not OS)
from now, what ever i do, phone boot only in twrp BOOTLOOP
now i am search in XDA and AH (german community AndroidHilfe) "honor 9 lite bootloop" NOTHING
by random found on AH "Huawei P smart [How to Root] + TWRP - Root - Anleitung". Huawei P smart is sister from Honor 9 Lite (very helpful thread-writer on AH)
ho help : at this moment no downloads at huawei/honor 9 lite (for help i need "update.app") now i wait...
2 days later (wait is not my strength) i found FHMate10Tool. users write "this can work/cant work - test it.
i test it. on windows-pc open explorer, go to folder, right-click on FHMate10Tool.exe, "run as admin", dos-prompt open and write text from tool
usb-wire in pc and phone (phone is on)
point 1 in tool: "root phone" ; i write "1" and press enter
tool write "this rooting phone: for yes press enter", i press enter, 4..5 seconds later write tool "your phone is rootet and rebooting"
phone reboot and boot i customOS - WOH :laugh: phone configure, apps install and phone working (always inside the wrong twrp)
5 days later phone write"new update anailable! install?" "yes" and ota-update download (i think 1 hour) and write "update now" "yes"
update go to factory-update-mode (erecovery?) begins and brake by 25%, "what a hell !!!", i reboot
now the best idea from my life. i copy with es-explorer(root) from /data/update/Hwouc/... the "update.app" to my sd-card.
my phone have build 8.0.0.121, the update.app is LLD-L31 8.0.0.127(C432)FULL. This is important, the little updates not inside "system, recovery". the FULL is what i need.
start HuaweiUpdateExtractor, select update.app, settings "all hook out", extract "recovery_ramdis.img" and "system.img" (automatic extract the header-files)
now copy this 4 files to my adb-folder, phone in bootloader-mode, usb-wire pc to phone
open dos-promt, cd.. to adb-folder, check connection with "fastboot devices", connection work and the fun begins
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
NOW is custom recovery and system on phone
to clear userdata
- fastboot erase userdata (this make what you reed: ERASE)
- now boot to erecovery (usb-wire in pc and phone, vol-up and power press on phone) and make factory reset. this make low-level-format with userdata.
- reboot and phone is clean and fresh as a new phone. no twrp, no rootet. if i wish (yes) i can fresh install
only restriction at this time: twrp is beta! no full work, backup/restore system = work, backup/restore data = NOT work.
supplement
this work on my phone! on your phone? test at your owen risk
bevor twrp has full-function: attention to this point. no data-backup. everyone brake phone: you begins by zero /better begins zero else phone ded
experience
i search for LOS15.1 or RR, for this phone nothing found. i test system.img(oreo!) from other models (my risk, my phone, my fun). i test to now 5x, next test in 5 minutes
now nothing run on my phone. flash *.img, no boot to OS, the game starts from the beginning
- inserted 20180325 13:05 test not work, return to customOS
- inserted 20180325 13:40 systemOS work, SuperSU is from old install! ALL GOOD :good:
bootloader is open if: PHONE Unlocked & FRP Unlock
I hope this is helpful for your bootloop :angel:
View attachment 4457135
Click to expand...
Click to collapse
I have to apply the procedure point by point unfortunately the factory reset of the erecovery remains blocking to zero, and I remain in bootloop. . . Do you have a backup stock flashable rom with twrp? OR ANOTHER SOLUTION? THANKS
i have finally twrp reflash and i made a factory reset with twrp ... normal boot result and everything works ... i have the possibility thereafter of reflashed erecovery stock ... but not useful for me for the moment ... how is it that my firmware number does not match your file? I am in b128 and your update full file is in b127?
@angixspirit
my last FULL-Update is "b127".
Now is TWRP with de-/encrypt in short time available (i am test beta-version)
I wish reset my "data" to factory-settings(crypt)
I use recovery_ramdisk_BKL-L04_nocheck (thank's @Atarii) for install my FULL-Update
After this reboot my phone, FULL-Update is installed AND "data" is crypted (factory-state)
Now work twrp (new twrp in test-version !) WITH de-/encryption.
I hope in next days comming new thread from developer in this forum.
The new TWRP is in standard-look and -feeling and -language.
Over night came update "b128"
The way with recovery_ramdisk_BKL-L04_nocheck (thank's @Atarii) have advantage
- the complete stock-rom is reflashed (with all partitions inside update)
- erecovery work (by me)
disadvantage
- the huawei-bloatware now again delete
Where to find this recovery?recovery_ramdisk_BKL-L04_nocheck?
---------- Post added at 04:11 PM ---------- Previous post was at 03:36 PM ----------
angixspirit said:
i have finally twrp reflash and i made a factory reset with twrp ... normal boot result and everything works ... i have the possibility thereafter of reflashed erecovery stock ... but not useful for me for the moment ... how is it that my firmware number does not match your file? I am in b128 and your update full file is in b127?
Click to expand...
Click to collapse
But I used your update full b127 and when such starts I'm in b128 (update at startup age maybe?)
https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085
your firmware
i think, your build is b128. if you update to b127 = downgrade. i dont know if this work in stock-rom.
Search
you see on xda-side in browser on top / right the "search-field" ?
Search-Field = "Type device or find apps, ROMs, & more"
this search in xda and is faster as search in google
Your personal task : search in xda "Huawei Firmware Finder" and look for thread.
If you found the thread then download the Software to your PC, install and search in FirmwareFinder "FULL-Upate" for your phone.
I am found LLD-L31 8.0.0.131(C432). This is actual the last build for download.
I'm curious if you think so
If you found : you can see, what TeamMT offer on Firmware for your phone.
Nice
I repeat the procedure with your ram file erecovery disk ... Same result impossible to make factory reset, and Huawei tells me that the tel is rooted and I am in b128 ... I have yet made a wipe of the storage system intern etc with twrp before, and. I used your full update b127 for fastboot ...
So here after installation I used firmware finder I chose the firmware b127 full I used the proxy for download internally .. And here my system asks me the official update to b127 ... No problem the system comes back with the bloatware in erecovery the factory reset works fine ... And since update removed to b128 b130 ... ?
Strongly the new twrp that I continue my experimentation
Ps Ps I just saw your message on update finder .. I know all this thank you very much
Huawei LLD-AL10
Phone Relocked
FRP Lock
any fix
Zunayedazad said:
Huawei LLD-AL10
Phone Relocked
FRP Lock
any fix
Click to expand...
Click to collapse
https://forum.xda-developers.com/9-lite/how-to/guide-unlock-frp-phone-bootlooping-t3808650
Tell me your C-Number to find the correct firmware to flash.
Sent from my kminiltexx using XDA Labs
Warning - USE THIS GUIDE AT YOUR OWN RISK. I AM NOT RESPONSIBLE IF YOU END UP BRICKING YOUR DEVICE.
[Update 29.08.2019] Added new download locations for raw images
[Update 07.01.2019] Added more current raw image for ZS620KL WW 80.30.96.111
[Update 25.10.2018] Added raw image for ZS621KL.
[Update 09.08.2018] Updated for 80.11.37.95 and future versions.
[Update 20.07.2018] I was able to root FW 80.11.37.86 with Magisk Manager 5.8.3 so you are no longer locked to FW 80.11.37.69 and do not have to downgrade.
This guide is split into two sections: rooting and downgrade/unbrick.
Each section is split into a quick how to for experienced users and a more detailed guide.
General info:
The most current firmware as of 20.07.18 is 80.11.37.86. Newer versions will work too!
This guide is written for firmware 80.11.37.86. If you do not want to upgrade/downgrade to 80.11.37.86 you will need to use the firmware (zip file from ASUS) you are on in all the steps.
If you upgrade your firmware to a newer version AFTER rooting it you will lose root! You will need to patch the boot.img of the new firmware again > follow the rooting guide.
I have only tested this on my ZS620KL Z01RD WW version. It should work on other variants JP/RU.
Magisk hide is working and Safetynet check passes.
Bugs/problems:
Unlocking the bootloader will void your warranty! Currently there is no method known to relock it!
You will get a warning message about your unlocked bootloader at every boot.
You will no longer receive OTA updates but you can download the new firmwares directly from Asus.
You will get a warning message about an internal problem every boot. Which you can disable if you do not need write access to the vendor partition.
> see rooting guide 10.
[Downloads]
for rooting
The latest and official platform tools (adb/fastboot) directly from google.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Payload_dumper to extract the boot.img from the firmware:
https://androidfilehost.com/?fid=818070582850510260
Magisk Manager:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
The bootloader unlock app and the 80.11.37.86 firmware for your device (WW/RU/JP) from ASUS:
https://www.asus.com/Phone/ZenFone-5Z-ZS620KL/HelpDesk_Download/
for downgrade/unbrick
raw firmware (ZS620KL WW):
WW 80.10.8.54
https://www.androidfilehost.com/?fid=1899786940962570681
https://mega.nz/#F!2fIgmAoa!2q4ra3R1Cp0fyKZDYdVMwg
WW 80.30.96.111
https://www.androidfilehost.com/?fid=1899786940962570682
https://drive.google.com/file/d/16OgxiPFSDJwhitnqJaITuO-XPOrg_7q9/view
https://mega.nz/#F!2fIgmAoa!2q4ra3R1Cp0fyKZDYdVMwg
Confirmed working by amscova.
raw firmware (ZS621KL):
https://addrom.com/raw-rom-unbrick-for-asus-zenfone-5z-zs621kl/
https://www.androidfilehost.com/?fid=1899786940962570680
https://mega.nz/#F!2fIgmAoa!2q4ra3R1Cp0fyKZDYdVMwg
Confirmed working by B Nath.
[Rooting how to]
Upgrade to firmware 80.11.37.86 and enable usb debugging.
Unlock your bootloader with the app.
Extract boot.img from firmware using payload_dumper.
Patch boot.img with magisk manager.
fastboot flash boot patched_boot.img.
Enjoy root.
[Rooting guide]
You can root any firmware from 80.11.37.86 up with this guide. To upgrade to a newer firmware version copy the zip file (e.g. UL-Z01R-WW-80.11.37.86-user.zip) you downloaded from Asus
to the root of your phones internal memory and reboot or unplug your usb cable.
You will get an update found notification. Start the update. To downgrade check the downgrade guide below.
Enable usb debugging in System > Developer options. If you can not see System > Developer options go to System > About phone > Software information > Build number and tap it multiple times.
This will make the Developer options visible.
WARNING! Upgrading to some firmwares disables usb debugging and you need to enable it again.
Make a backup of all the data you do not want to lose.
Download the platform tools and extract them into a folder (i will use c:\5z\ in this guide) this will create a subfolder platform-tools.
You need a current fastboot version for this to work (due to a/b slots/partitions), so please use the current platformtools!
Download the bootloader unlock app, extract the UnlockTool_9.1.0.3_180621_fulldpi_Draco_GDPR.apk and copy it to your phone.
Use a filemanager on your phone to install it and follow the on screen instructions to unlock the bootloader.
WARNING! You will lose your warranty and all data on the phone so backup beforehand. You will see the first warning message at boot after this. There is currently no method know to relock the bootloader.
Download payload_dumper and extract it to c:\5z\. A payload_dumper-win64 folder will be created.
Download the firmware zip of the version you have on your phone and extract payload.bin from the zip to c:\5z\payload_dumper-win64\payload_input\ folder.
Start c:\5z\payload_dumper-win64\payload_dumper.exe and let it finish. Now copy the c:\5z\payload_dumper-win64\payload_output\boot.img to your phone (i will use the download folder).
Download Magisk Manager, copy the apk to your phone and use a filemanager on your phone to install it. Start the app and update it if you are asked.
When you are asked if you want to install Magisk > install. Select Method > Patch Boot Image File. Now select the boot.img in the download folder and let it finish patching.
Copy the patched_boot.img from the MagiskManager folder on your phone to c:\5z\platform-tools\
Start your phone in fastboot mode. To do that press and hold "power+volume up" to switch it on until you see the fastboot menu. If you are having trouble getting there,
it helps to release the power button first then the volume up when you see the menu.
Now connect the phone to your computer with the original usb cable. Open a command line with admin privileges and excute the following commands:
To switch to the fastboot dir:
Code:
cd c:\5z\platform-tools\
To check if your phone has been found:
Code:
fastboot devices
You should see the serial number of your phone.
Now flashing the patched boot image:
Code:
fastboot flash boot patched_boot.img
The output should look something like this:
target reported max download size of 268435456 bytes
sending 'boot' (18724 KB)...
OKAY [ 0.620s]
writing 'boot_a'...
OKAY [ 0.133s]
finished. total time: 0.756s
And the reboot:
Code:
fastboot reboot
Your phone should be booting now and you will see the second warning message "There is an internal problem with your device...".
If you want to get rid of that warning and do not need write access to your vendor partition (you most likely do not):
Open Magisk Manager and in the main screen press Uninstall > Restore Images to restore the images, check Preserve AVB 2.0/dm-verity checkbox in "Advanced Settings" on the main screen, then reinstall Magisk by pressing Install > direct install in the main screen.
Should you be stuck in the Zenfone boot animation or something went wrong, you will need to follow the steps in the unbrick section.
Otherwise your phone is rooted now. Enjoy.
[Downgrade/unbrick how to]
Download and extract the raw firmware.
With the phone in fastboot mode execute flashall_aft.cmd in the extraction folder.
You are now downgraded/unbricked with firmware 80.10.8.54.
Copy firmware version of your choice to internal sd card root and reboot/unplug usb cable to get "update notification".
Start the update to selected firmware from the "update found" notification.
[Downgrade/unbrick guide]
If you need to downgrade the firmware or if you have somehow bricked your device you can try to flash a raw (full) image of the phone.
Download and extract the raw firmware to c:\5z\raw.
If the download link is no longer working google for WW__ZS620KL_80.10.8.54_MP_user_20180517175955_release.zip and download it.
Start your phone in fastboot mode. To do that press and hold "power+volume up" to switch it on until you see the fastboot menu. If you are having trouble getting there,
it helps to release the power button first then the volume up when you see the menu.
Now connect the phone to your computer with the original usb cable. Open a command line with admin privileges and excute the following commands:
To switch to the fastboot dir:
Code:
cd c:\5z\raw
To flash the raw image:
Code:
flashall_aft.cmd
This will take a few minutes and the phone will reboot automatically. The first boot will take a little longer but your phone should now be unbricked and downgraded to 80.10.8.54.
You can now go to the root section of the guide and upgrade to a more current firmware.
Thanks to Renaf2 for his ZE620KL guide, GSPD and amscova for providing the ZS620KL raw image links and B Nath for finding the ZS621KL raw image.
Nice Theard
Thank You for your work
Upgrade after rooting
Hello,after downgrade and rooting the phone with your method,it is posible to put in internal memory the last version of firmware(80.11.37.86) and upgrade the phone,or the phone remains blocked in the version of firmware(80.11.37.69) which we make downgrade and root?Thank you for your hard work.
isthisadagger said:
Warning - USE THIS GUIDE AT YOUR OWN RISK. I AM NOT RESPONSIBLE IF YOU END UP BRICKING YOUR DEVICE.
Click to expand...
Click to collapse
Process is too long. I am working on unofficial Unlock Tool so that we can retain the warranty.
For downgrading, there is a tool for that. For me, fastboot codes may mess up the system/cache partitions.
If anyone wanna test my unlocking tool, feel free to PM me via Telegram
MOD EDIT: LINK REMOVED
The distribution of social media links is no longer allowed on XDA. Please refer to the thread linked below:
Telegram and Whatsapp Channels - Going Forward
mihaitaiosub said:
Hello,after downgrade and rooting the phone with your method,it is posible to put in internal memory the last version of firmware(80.11.37.86) and upgrade the phone,or the phone remains blocked in the version of firmware(80.11.37.69) which we make downgrade and root?Thank you for your hard work.
Click to expand...
Click to collapse
Yes it is possible but you will lose root.
Patching the boot.img for 80.11.37.79 and 80.11.37.86 does not seem to work with this method.
isthisadagger said:
Yes it is possible but you will lose root.
Patching the boot.img for 80.11.37.79 and 80.11.37.86 does not seem to work with this method.
Click to expand...
Click to collapse
And is not possible to root again whith method described on this thread?
mihaitaiosub said:
And is not possible to root again whith method described on this thread?
Click to expand...
Click to collapse
This is why we need TWRP.
mihaitaiosub said:
And is not possible to root again whith method described on this thread?
Click to expand...
Click to collapse
It is possible with Magisk Manager 5.8.3.
isthisadagger said:
Warning - USE THIS GUIDE AT YOUR OWN RISK. I AM NOT RESPONSIBLE IF YOU END UP BRICKING YOUR DEVICE.
[Update 20.07.2018] I was able to root FW 80.11.37.86 with Magisk Manager 5.8.3 so you are no longer locked to FW 80.11.37.69 and do not have to downgrade.
This guide is split into two sections: rooting and downgrade/unbrick.
Each section is split into a quick how to for experienced users and a more detailed guide.
General info:
The most current firmware as iof 20.07.18 is 80.11.37.86.
I have only tested this on my ZS620KL Z01RD WW version. It should work on other variants JP/RU.
This guide is written for firmware 80.11.37.86. If you do not want to upgrade to 80.11.37.86 you will need to use the firmware you are on in all the steps.
Magisk hide is working and Safetynet check passes.
Bugs/problems:
Unlocking the bootloader will void your warranty!
You will get a warning message about your unlocked bootloader at every boot.
You will get a warning message about an internal problem every boot. Which you can disable if you do not need write access to the vendor partition.
> see rooting guide 10.
[Downloads]
for rooting
The latest and official platform tools (adb/fastboot) directly from google.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Payload_dumper to extract the boot.img from the firmware:
https://androidfilehost.com/?fid=818070582850510260
Magisk Manager:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
The bootloader unlock app and the 80.11.37.86 firmware for your device (WW/RU/JP) from ASUS:
https://www.asus.com/Phone/ZenFone-5Z-ZS620KL/HelpDesk_Download/
for downgrade/unbrick
raw firmware:
https://drive.google.com/file/d/1ogbQeeNDRPFCb9jl3kpRDK_DmsneQ0xL/view?usp=drivesdk
[Rooting how to]
Upgrade to firmware 80.11.37.86 and enable usb debugging.
Unlock your bootloader with the app.
Extract boot.img from firmware using payload_dumper.
Patch boot.img with magisk manager.
fastboot flash boot patched_boot.img.
Enjoy root.
[Rooting guide]
You can root any firmware up to 80.11.37.86 with this guide. To upgrade to a newer firmware version copy the zip file (e.g. UL-Z01R-WW-80.11.37.86-user.zip) you downloaded from Asus
to the root of your phones internal memory and reboot or unplug your usb cable.
You will get an update found notification. Start the update. To downgrade check the downgrade guide below.
Enable usb debugging in System > Developer options. If you can not see System > Developer options go to System > About phone > Software information > Build number and tap it multiple times.
This will make the Developer options visible.
WARNING! Upgrading to some firmwares disables usb debugging and you need to enable it again.
Make a backup of all the data you do not want to lose.
Download the platform tools and extract them into a folder (i will use c:\5z\ in this guide) this will create a subfolder platform-tools.
You need a current fastboot version for this to work (due to a/b slots/partitions), so please use the current platformtools!
Download the bootloader unlock app, extract the UnlockTool_9.1.0.3_180621_fulldpi_Draco_GDPR.apk and copy it to your phone.
Use a filemanager on your phone to install it and follow the on screen instructions to unlock the bootloader.
WARNING! You will lose your warranty and all data on the phone so backup beforehand. You will see the first warning message at boot after this.
Download payload_dumper and extract it to c:\5z\. A payload_dumper-win64 folder will be created.
Download the firmware zip of the version you have on your phone and extract payload.bin from the zip to c:\5z\payload_dumper-win64\payload_input\ folder.
Start c:\5z\payload_dumper-win64\payload_dumper.exe and let it finish. Now copy the c:\5z\payload_dumper-win64\payload_output\boot.img to your phone (i will use the download folder).
Download Magisk Manager, copy the apk to your phone and use a filemanager on your phone to install it. Start the app and update it if you are asked.
When you are asked if you want to install Magisk > install. Select Method > Patch Boot Image File. Now select the boot.img in the download folder and let it finish patching.
Copy the patched_boot.img from the MagiskManager folder on your phone to c:\5z\platform-tools\
Start your phone in fastboot mode. To do that press and hold "power+volume up" to switch it on until you see the fastboot menu. If you are having trouble getting there,
it helps to release the power button first then the volume up when you see the menu.
Now connect the phone to your computer with the original usb cable. Open a command line with admin privileges and excute the following commands:
To switch to the fastboot dir:
Code:
cd c:\5z\platform-tools\
To check if your phone has been found:
Code:
fastboot devices
You should see the serial number of your phone.
Now flashing the patched boot image:
Code:
fastboot flash boot patched_boot.img
The output should look something like this:
target reported max download size of 268435456 bytes
sending 'boot' (18724 KB)...
OKAY [ 0.620s]
writing 'boot_a'...
OKAY [ 0.133s]
finished. total time: 0.756s
And the reboot:
Code:
fastboot reboot
Your phone should be booting now and you will see the second warning message "There is an internal problem with your device...".
If you want to get rid of that warning and do not need write access to your vendor partition (you most likely do not):
Open Magisk Manager and in the main screen press Uninstall > Restore Images to restore the images, check Preserve AVB 2.0/dm-verity checkbox in "Advanced Settings" on the main screen, then reinstall Magisk by pressing Install > direct install in the main screen.
Should you be stuck in the Zenfone boot animation or something went wrong, you will need to follow the steps in the unbrick section.
Otherwise your phone is rooted now. Enjoy.
[Downgrade/unbrick how to]
Download and extract the raw firmware.
With the phone in fastboot mode execute flashall_aft.cmd in the extraction folder.
You are now downgraded/unbricked with firmware 80.10.8.54.
Copy firmware version of your choice to internal sd card root and reboot/unplug usb cable to get "update notification".
Start the update to selected firmware from the "update found" notification.
[Downgrade/unbrick guide]
If you need to downgrade the firmware or if you have somehow bricked your device you can try to flash a raw (full) image of the phone.
Download and extract the raw firmware to c:\5z\raw.
If the download link is no longer working google for WW__ZS620KL_80.10.8.54_MP_user_20180517175955_release.zip and download it.
Start your phone in fastboot mode. To do that press and hold "power+volume up" to switch it on until you see the fastboot menu. If you are having trouble getting there,
it helps to release the power button first then the volume up when you see the menu.
Now connect the phone to your computer with the original usb cable. Open a command line with admin privileges and excute the following commands:
To switch to the fastboot dir:
Code:
cd c:\5z\raw
To flash the raw image:
Code:
patchall_aft.cmd
This will take a few minutes and the phone will reboot automatically. The first boot will take a little longer but your phone should now be unbricked and downgraded to 80.10.8.54.
You can now go to the root section of the guide and upgrade to a more current firmware.
Thanks to Renaf2 for his ZE620KL guide and GSPD for providing the raw image name.
Click to expand...
Click to collapse
Does unbricking lock the bootloader back since we will be flashing a raw a file.
With Magisk Manager 5.8.3 the whole guide works like a charm
THX
My Zenfone 5z isn't being detected in fastboot mode, kindly help with correct driver softwares, my PC is running on Windows 10
Update : I got my phone to detect in fastboot
How to wipe cache partition
Hi,
I am able to boot into recovery on Z5z but not able to see "wipe cache partition" option. I only see a wipe data/factory reset option.
I want to wipe cache to see if battery life improves. Can anyone let me know how to do this?
Thanks
chandru.biradar2 said:
Does unbricking lock the bootloader back since we will be flashing a raw a file.
Click to expand...
Click to collapse
No.
kelly66 said:
Hi,
I am able to boot into recovery on Z5z but not able to see "wipe cache partition" option. I only see a wipe data/factory reset option.
I want to wipe cache to see if battery life improves. Can anyone let me know how to do this?
Thanks
Click to expand...
Click to collapse
Honestly killing the cache rarely helps things.
hi guys how to do this on Macbook pro? Any clues?
shantanudl said:
hi guys how to do this on Macbook pro? Any clues?
Click to expand...
Click to collapse
I do not have any experience with mac os but if you want to root:
Adb/fastboot is available for mac os. All you need to do is find a tool to extract the boot.img from the payload.bin.
If you want to downgrade/unbrick: You would need to convert the bat/cmd files in the full firmware to some shell scripts and exchange the fastboot.exe.
How do I un-root, re-lock bootloader?
ferez said:
How do I un-root, re-lock bootloader?
Click to expand...
Click to collapse
unroot: You press "uninstall" in magisk manager or install an updated firmware without patching boot.img or downgrade.
I have not tried re-locking the bootloader.
So if I'm getting this right, after unlocking the bootloader I will not get OTA updates.
But I will be able to download the latest version (SKU) from Asus and put it in /sdcard/ folder, and rebooting will start the update of the new firmware.
Is this correct?
Kind regards
/Jens
jens13 said:
So if I'm getting this right, after unlocking the bootloader I will not get OTA updates.
But I will be able to download the latest version (SKU) from Asus and put it in /sdcard/ folder, and rebooting will start the update of the new firmware.
Is this correct?
Kind regards
/Jens
Click to expand...
Click to collapse
You won't get OTAs + your warranty is voided (due to unlocking Officially)
Yes, you can update your phone by sideloading the zip from ASUS Support Website