Database Develop

Unlock Bootloader, Convert L23 to L21 and upgrade to Android 6 Official & Custom

Huawei P8 Lite - Unlock Bootloader, Convert L23 to L21 and upgrade to Android 6 Official & Custom - (October 30, 2016).
IMPORTANT!
This tutorial describes the steps and necessary order to update the Huawei P8 Lite L23 or L21 to a newer version of Android. All in one tutorial to walk not looking separately each step is explained as much as I practice possible, if still do not achieve good for Re-Lean and try it as many times as necessary or ask if flat can not, if no then go for a beer and tacos, relax and try again later.
If you do not feel ready or deplano have not the foggiest idea of ​​what arises in this best Tutorial leave your cell like this, if you also have your phone you used to what is necessary as well leave it, dedicate to research terms you do not understand Moreover, do not try to "run without first learning to walk," you're not coming back Millionnaire, or you're going back more handsome, strong, and you will be the most intelligent or interesting, or you will become immortal only by Update your phone to Android in June , so be patient, be aware and do not hasten. At the precise moment you decide to continue with this tutorial, you become absolutely responsible for what happens to your phone and your actions. Please proceed with caution and do not play the chingon.
ODYSSEY BEGINS HERE!
UNLOCK BOOTLOADER
You can get the code to unlock the Bootloader in the following ways:
Following in the footsteps of EloyGomez Video Tutorial:
PD: Add a "w" to download.
https://ww.youtube.com/watch?v=AVmAEQjOnNQ
Following the Steps of taking screenshots and a previous orientation with EloyGomez Video:
https://plus.google.com/u/0/photos/+JohnMillerDev7/albums/6305181114976401569
Using "Huawei Product ID Generator" and following the instructions (I recommend you go copying data from a notebook and save them, you never know when you can return to need):
Download "Huawei Product ID Generator" extract it where they like and run. (It is a very simple little program).
Product Model: HUAWEI Y300-0000 (selecionan that model).
Product IMEI / MEID: "Here put your IMEI / MEID".
Product ID: "Here Product ID generates them automatically according to product model & product IMEI / MEID previously placed, and which must wear on the page"
Enter the page to Unlock Bootloader Huawei, Whether the version in English or Chinese, the only thing that changes is the language. They can try with 2 pages.
Create an account so that they can log in, they can also log in with Facebook, it is very simple.
Once you have created your account and logged in, we see the page for the unlock code.
Fill the fields with the data that we requested and put the following:
Product type: Smartphone
Product model: HUAWEI Y300-0000 (If you do not work with this, try with all models that are in the generator) (Also try with CAPITALS & lowercase).
Product Serial number: They get in Settings> About phone> Status> Serial Number.
Product IMEI: They get in Settings> About phone> Status> IMEI.
Product ID: They get the "Huawei Product ID Generator" (The program that generated them a while ago).
Captcha place the page requesting them and pressed Send or Submit, you must give the unlock code for Bootloader, copy it into the notebook (which I suppose must carry).
Now Turn to Settings> About Phone and Pulsen several times on "Compilation" until muentre them the message "now are a developer" Returning to Settings and you will see the option "Developer" tab, go there, if they are not active options because the activated developer, now a little move down and activate "USB debugging".
Download the "UNLOCK HUAWEI BOOTLOADER" extract it where they like, then connect your phone to the PC and run "UNLOCK BOOTLOADER.bat" program.
And the rest is a cinch, just follow the instructions anger us indicating the program, Drivers ADB & HiSuite (At most only have to accept the terms, click next and finish) were installed, the phone will restart a few sometimes they do not worry or despair pANIC not normal will reboot.
When they unlocked the Bootloader can disconnect your phone from the PC on and off.
Now let's check that everything went well, keep pressed "Vol-" while we connect to the PC, you will see a white screen with some letters (that's the Fastboot mode), and if they see the text "PHONE UNLOCKED" because Congratulations, Make unlocked the bootloader correctly.
Hechate a beer, a soft drink, Pau-Pau or commits a loaf to celebrate, but do not get too excited because it only been the beginning, we still some way to go, but certainly this is the most important step of all, because without having the unlocked Bootloader is not at all advisable to make root the phone, install a recovery or install a custom ROM, those using KingRoot arise after them so rare mistakes and to get them to damage the phone.
OFFICIAL FOR HUAWEI UNLOCK CODE BOOTLOADER:
https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
HUAWEI OFFICIAL VERSION IN CHINA FOR UNLOCK CODE BOOTLOADER:
PD: Add a "w" to see the website.
https://ww.emui.com/plugin.php?id=unlock&mod=detail
TOOLS YOU NEED TO DOWNLOAD:
Bootloader unlock huawei:
https://mega.nz/#!uRkC2DQS!R2IMpEpUAtrDH4-Gi4VLi8Mcz5_h98jtKsBATpMBQYg
Huawei Generator Product ID:
https://mega.nz/#!eE81BbrT!_JBTy1ZCdFuYd7JwFLnaQe06I47ua__hEa4GHx6PZvM
If the PC does not recognize them the phone even after the program to automatically install the ADB drivers, then download, extract and install these, is not all that complicated should only connect your phone to the PC.
Run programs just follow the instructions and go. May need to click on Next, Finish, "Y" or "ENTER".
https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
CONVERT L21 To L23
(If you reached this step means that are already Pros .... hahaha Wes is not true, it is believed!, Read on!)
At this point what we will do first is to install the TWRP Recovery and make full Wipes in order to erase the system and leave the phone in white to make a much cleaner installation without errors. So we follow the following instructions:
PD: You can install the TWRP who like V2 or V3, the procedures are the same, just change a bit the interface.
Instructions for both versions:
Download TWRP INSTALL RECOVERY (V2 or V3) P8 HUAWEI LITE.rar
Download adb-setup-1.4.3.rar
Unzip adb-setup-1.4.3.rar and run the program. (This is for adb drivers and pc can detect the terminal is installed.)
We will see a blue screen console Type "and" or "accept" in everything and close the window. If you ask them to restart the pc, do it and go.
Begin your phone in Fastboot mode; Turn off the phone and press the "VOL" key and without releasing conectenlo to the PC until Fastboot screen appears.
Unzip "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI LITE.rar P8" and execute the file "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI LITE.bat P8" and follow the steps.
Do not take more than 5 minutes is just a matter of going press ENTER.
Turn off the phone and Start TWRP Recovery Mode (Vol + & Power) Click on WIPE, Advanced Wipe and make full wipes:
Should be marked:
Dalvik
Cache
Data
Internal storage
System
IMPORTANT !: not marques "micro sdcard".
Return to Menu, press Reboot, and then Bootloader.
Files:
TWRP V2:
https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3:
https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
ADB:
https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
After you have successfully done this, we continue to spend our L23 to L21 P8 Lite, I recommend removing your SD card and SIM Card precaution. We follow the instructions:
Downloading "FlashRom C432B052 (Lollipop 5.0, 3.1 EMUI) Dual Sim Transition" extract it where they like, Begin your phone in Fastboot mode, connect it to PC, execute the "FLASH-ALL.bat" file (not execute permissions administrator), and follow the instructions that tells the program.
You complete the process when the phone is started with the new system, if you are targeting "About phone" say "Balong". To remove that must be installed Step2.
Downloading "Step2", extract it, look for the "UPDATE.APP" file and copy it to the "DLOAD" your SD card folder if you do not have then created. (Clearly it must first insert the SD on the phone).
Then head to Settings> Updater> Menu> Update Local and selecionan the UPDATE.APP (Step2). The phone will reboot, start the installation and wait for it to finish. When you start the system and check the "About phone" no longer tell Balong but L21.
After this I recommend doing a factory reset, first remove your SD card, then go to "Settings> Security> Backup and Restore" or type in the search bar settings "Backup and Restore" click "Factory Data Reset "mark" Delete memory ", press" Reset "and wait to finish the process. If for some reason out "Failed" do not worry just restart, anyway there will reset the cel, also do not worry if you have no signal or you will not detect the SIM, that is fixed by installing the following update.
Congratulations you get past your cel L21!
Files:
FlashRom C432B052:
https://mega.nz/#!LQNimCgQ!oq2C_Gwvwv7zoigo8GR2kstPdHDO5ESJ9Qglv_2UERs
Step2:
https://mega.nz/#!vdsDEZSb!3FIgh6WNgP4NWRfnGoDxisd1wAQk3CBPKdKl8_If-v0
UPDATED ANDROID 6 Official
The update command is as follows: "B052> B170> B560> B564" or "B052> B170> B550> B560> B564"
(Compiling B560 is the most stable so far).
Being in the B052 just have to download the following Compilaciones and be updated locally via:
"B170> B560> B564" or "B170> B550> B560> B564". I recommend that for every update they make, do a factory reset to eivtar errors, this is optional in the end, I just do them the recommendation from experience.
The B170 downloaded, extract the files, copy the DLOAD UPDATE.APP folder on your SD, head to Settings> Updater> Menu> Update Local and selecionan the UPDATE.APP, the phone restarts, start the installation and wait end.
Now being in the B170, repeat the previous step to install the B550 or B560 Compilation. (Depending on the order above mentioned update, they work better or decide to take)
Now when they are on the B560 turn to the B564 but no longer appear the option "Update Local", so there are 2 options to perform the update: (and must have the UPDATE: APP previously copied to the DLOAD, the update.app always be copied to Dload no other):
Option 1:
Type the following code in the app called "* # * # 2846579 # * # *" ​​(without quotes obviously).
Appear the famous hidden menu, click "Software Upgrade"> "SDCard Upgrade"> will leave them a message "Are you Sure" (are you sure?), Pressed OK, start the update and wait for it to finish.
Option 2:
Cel being off or on, press the (Vol-, Vol +, Power) aperezca keys until the update screen and wait to finish the process.
And that would be all, Congratulations and cell habras updated to Android in June!
If you get here it means you're half Pro.
Official Roms (Installation Via Local):
PD: Add "http:" extension links to download.
B170:
//download-c.huawei.com/download/downloadCenter?downloadId=57325&version=181091&siteCode=fi
B550:
//download-c.huawei.com/download/downloadCenter?downloadId=78426&version=312720&siteCode=es
B560:
//download-c.huawei.com/download/downloadCenter?downloadId=80469&version=319382&siteCode=pl
https://mega.nz/#!uRNRDRaA!zavgQtBakqdg_lbXmgoKwB7qotPoXOJvJofvnPlM1CI
B564:
https://mega.nz/#!aAVhkbgI!1cGtLB0HxQN0x-KeyB2MqQ3JWeGEnvD2aKll7vsCa60
UPDATED CUSTOM ROM ANDROID 6
Just click on the link, read the post and go following the instructions that you indicate. Patience and Success!
PD: Add "http" "://" "w" to see the website.
[TUTORIAL] Install Android B560 & B564 6 (Dual Sim) Custom Rom V2 - Sokkoban - (Updated July 18, 2016)
ww.htcmania.com/showthread.php?t=1188059
Rom ROM Spectre - Android 6 B560 (Dual Sim) - POST UPDATED (26 AUGUST 2016)
ww.htcmania.com/showthread.php?t=1200900
Rom ROM Phenom - Android 6 B564 (Dual Sim) - POST UPDATED (26 August 2016)
ww.htcmania.com/showthread.php?t=1220243
Rom ROM Opteron - Android 6 B574 (Dual Sim) - POST UPDATED (26 AUGUST 2016)
ww.htcmania.com/showthread.php?t=1218158
Nautilus Android ROM Rom 6 B564 (Dual Sim) - October 13, 2016
ww.htcmania.com/showthread.php?t=1241126
Rom ROM Helios - 6 B890 EMUI Android 4.1 (Dual Sim) - October 25, 2016.
ww.htcmania.com/showthread.php?t=1245909
DRIVERS EXTRAS
Here I leave some Drivers Extras to troubleshoot issues fastboot, adb, if the PC does not detect the Cell, the installation of each is very simple, just keep connected your cel to the PC, run programs, you must give "next" and then restart the PC if necessary.
Files:
https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
And that's all I hope I have been clear and supported with this Tutorial.
Greetings from Coatzacoalcos, Veracruz, Mexico! :fingers-crossed:

Guide Root and Unbrick Moto E3 Power (XT1706), For newbie

Firstly, I want to say ‘thankyou’ to pranaay saini and dr.faramroze. u guys are first man who post topic guide root and build specialy TWRP for Moto E3 Power. And now, I want to share my story about my process ‘rooting Moto E3 Power’ LoL :
*Note:
1/ Im a newbie, not a specialist about android phone or technician mobile. I just a person who curious ‘rooting android’ to make my phone can delete almost factory app not neccesary.LoL. Truly, I want to cheat mobile game =)).
2/ I had successful root HTC One M7 before, so Let’s see me have a little exp for Rooting . Then own the new Moto E3 Power and I want do the same HTC .
*My story:
I bought the new E3 Power on online store and Im going to root it. Unluckily, I forgot to ‘fastboot format userdata’ and this phone gonna ‘bootloop’ :v. I bring it to fix in small repair phone center (I already give them the stock rom), hope they can flash rom stock but they turn my phone into ‘hard bricked mode’ :v, less well they format S/N @@.
That’s a awful time in my life =)), I sent it back to store. Luckily, they accept to fix it cause I just used it for 2 days (actually I told them it was factory error) and maybe they believe it true ‘opsss! So sorry’.
After my phone fixed, I root it again, and this time I did really carefully so ‘Your device has rooted’ Bravo! =)). And ‘Peaceful time’ long last 4months, I just install SDMaid and run Luckypatcher to crack SDMaid FREE up to SDMaid PRO, and used SDMaid to cleanup the phone, then my phone run to error ‘com.android.phone had stoped’, and I also find many ways to fix this problem, almost solution on the internet I have try but it’s not working, the finnally option, I chose to ‘reset phone to factory’ . OOOPS! My phone got ‘Soft bricked’ =.=,unfortunately I had deleted file TWRP backup @@, then I tried to flash stock rom thought TWRP but it error =.=. At this moment, I think ‘prehap I bring it to store fix it again?’ . NOPE! Im looking on the internet to find out solution to fix it (just a few days before I write this topic), finally only way to fix that is ‘SP Flash Tool’ =)), and it work! .
*So it’s all my story when I come to E3 GOD Power =)). Sorry if it so drammatic and bad english :”>. U guys can skip that and go to Main Problem here:
== How to root Moto E3 Power (XT1706) ==
Plz follow step by step if u are new guys like me xD! (Picture guide bellow)
1/ Prepare: ADB (or minimal ADB) and ADB driver on ur PC (u can search on XDA forum to get link download – I recommend use minimal ADB).
2/ Get TWRP recovery and SuperSU from this link:
https://forum.xda-developers.com/showpost.php?p=69311942&postcount=22
copy file SuperSU to SDcard.
3/ On your phone, go to Setting > Choose About phone > roll down to last line > tap many times to set u up to Developer > then back so now u can see ‘Developer options’ line > go into it > swipe ON OEM Unlocking and USB Debugging.
4/ Now turn off power, after screen off hold Power button and Up Volume to boot ur phone into ‘fastboot mode’.
5/ Connect ur phone to PC and open ADB u install before (open ADB as administrator)
6/ Copy file TWRP recovery (*.img) u have download into folder ADB u install before. U can rename it to remember and type on ADB easier. (to me: rename it to recoverymoto.img)
7/ Execute the following comand on ADB:
- ‘fastboot devices’ >> its show u ur device connected to PC or not. If not, plz check adb driver.
- ‘fastboot oem unlock’ >> now on ur display phone have announce unlock YES/NO? follow instruction on display phone. YES to unlock.
- ‘fastboot format userdata’ >> make sure u do this command cause if not after u flash TWRP recovery and reboot system u gonna to stuck boot or boot loop.
- ‘fastboot flash recovery recovery.img’ >> its change Default recovery to TWRP recovery.
Well done! Now u successful to install TWRP.
8/ Now hold Power button and Up Volume to boot ur phone into ‘fastboot mode’ but not choose Fasboot mode, choose Recovery mode. It gonna turn into TWRP recovery display.
9/ Last step. In TWRP working display > choose Install > Select microSD > then u see file SuperSU in SDcard u copy in step 2 > choose file SuperSU and install it > after all done, reboot system and ENJOY ‘Your device has rooted’ .
*Note: If u reboot, it stuck at Moto logo, or boot loop. Plz Redo Step 4 to Step 9. If not, u need to comment and me and E3 power brother will help u
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
2/ Prepare MTKdriver (MediaTek driver) for ur PC, u can download on this link:
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
https://androidmtk.com/download-mtk-usb-all-drivers
3/ After install all, open SPflash tool (dont plugin cable and phone to PC), just open flashtool and WARNING on tab Format, don’t Format if u don’t know how to use for what purpose! Cause if u format ur imei phone has gone :v…and u will find and learn how to use S/N tool or even bring it to change mainboard :v…. So DONT, just focus on tab Dowload.
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
6/ Congratulation! Ur phone back to Factory come out . hold the power button and ENJOY ur phone reborn .
*Note: during time flashing ROM, do not plugout cable.
Thanks for your reading!If u like this,give me 1 Thanks . Welcome all constructive comments to help me edit this topic more complete.

First of all I would like to say that @bopvnn luck is not on your side :silly: second of all , all the work was done by @dr.faramroze I just made the tutorial a bit easier .

pranaay saini said:
First of all I would like to say that @bopvnn luck is not on your side :silly: second of all , all the work was done by @dr.faramroze I just made the tutorial a bit easier .
Click to expand...
Click to collapse
i dont know what u mean "lucky is not on my side" :-?

bopvnn said:
i dont know what u mean "lucky is not on my side" :-?
Click to expand...
Click to collapse
Meaning you have bad luck .

Hey, I see some guys on Youtube that said losing their IMEI after flashing stock rom using SP Flash Tool. How to restore it? The last time I use a Mediatek Device it was an Android One.

Removing battery wont help ,
bopvnn said:
Firstly, I want to say ‘thankyou’ to pranaay saini and dr.faramroze. u guys are first man who post topic guide root and build specialy TWRP for Moto E3 Power. And now, I want to share my story about my process ‘rooting Moto E3 Power’ LoL :
*Note:
1/ Im a newbie, not a specialist about android phone or technician mobile. I just a person who curious ‘rooting android’ to make my phone can delete almost factory app not neccesary.LoL. Truly, I want to cheat mobile game =)).
2/ I had successful root HTC One M7 before, so Let’s see me have a little exp for Rooting . Then own the new Moto E3 Power and I want do the same HTC .
*My story:
I bought the new E3 Power on online store and Im going to root it. Unluckily, I forgot to ‘fastboot format userdata’ and this phone gonna ‘bootloop’ :v. I bring it to fix in small repair phone center (I already give them the stock rom), hope they can flash rom stock but they turn my phone into ‘hard bricked mode’ :v, less well they format S/N @@.
That’s a awful time in my life =)), I sent it back to store. Luckily, they accept to fix it cause I just used it for 2 days (actually I told them it was factory error) and maybe they believe it true ‘opsss! So sorry’.
After my phone fixed, I root it again, and this time I did really carefully so ‘Your device has rooted’ Bravo! =)). And ‘Peaceful time’ long last 4months, I just install SDMaid and run Luckypatcher to crack SDMaid FREE up to SDMaid PRO, and used SDMaid to cleanup the phone, then my phone run to error ‘com.android.phone had stoped’, and I also find many ways to fix this problem, almost solution on the internet I have try but it’s not working, the finnally option, I chose to ‘reset phone to factory’ . OOOPS! My phone got ‘Soft bricked’ =.=,unfortunately I had deleted file TWRP backup @@, then I tried to flash stock rom thought TWRP but it error =.=. At this moment, I think ‘prehap I bring it to store fix it again?’ . NOPE! Im looking on the internet to find out solution to fix it (just a few days before I write this topic), finally only way to fix that is ‘SP Flash Tool’ =)), and it work! .
*So it’s all my story when I come to E3 GOD Power =)). Sorry if it so drammatic and bad english :”>. U guys can skip that and go to Main Problem here:
== How to root Moto E3 Power (XT1706) ==
Plz follow step by step if u are new guys like me xD! (Picture guide bellow)
1/ Prepare: ADB (or minimal ADB) and ADB driver on ur PC (u can search on XDA forum to get link download – I recommend use minimal ADB).
2/ Get TWRP recovery and SuperSU from this link:
https://forum.xda-developers.com/showpost.php?p=69311942&postcount=22
copy file SuperSU to SDcard.
3/ On your phone, go to Setting > Choose About phone > roll down to last line > tap many times to set u up to Developer > then back so now u can see ‘Developer options’ line > go into it > swipe ON OEM Unlocking and USB Debugging.
4/ Now turn off power, after screen off hold Power button and Up Volume to boot ur phone into ‘fastboot mode’.
5/ Connect ur phone to PC and open ADB u install before (open ADB as administrator)
6/ Copy file TWRP recovery (*.img) u have download into folder ADB u install before. U can rename it to remember and type on ADB easier. (to me: rename it to recoverymoto.img)
7/ Execute the following comand on ADB:
- ‘fastboot devices’ >> its show u ur device connected to PC or not. If not, plz check adb driver.
- ‘fastboot oem unlock’ >> now on ur display phone have announce unlock YES/NO? follow instruction on display phone. YES to unlock.
- ‘fastboot format userdata’ >> make sure u do this command cause if not after u flash TWRP recovery and reboot system u gonna to stuck boot or boot loop.
- ‘fastboot flash recovery recovery.img’ >> its change Default recovery to TWRP recovery.
Well done! Now u successful to install TWRP.
8/ Now hold Power button and Up Volume to boot ur phone into ‘fastboot mode’ but not choose Fasboot mode, choose Recovery mode. It gonna turn into TWRP recovery display.
9/ Last step. In TWRP working display > choose Install > Select microSD > then u see file SuperSU in SDcard u copy in step 2 > choose file SuperSU and install it > after all done, reboot system and ENJOY ‘Your device has rooted’ .
*Note: If u reboot, it stuck at Moto logo, or boot loop. Plz Redo Step 4 to Step 9. If not, u need to comment and me and E3 power brother will help u
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
2/ Prepare MTKdriver (MediaTek driver) for ur PC, u can download on this link:
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
https://androidmtk.com/download-mtk-usb-all-drivers
3/ After install all, open SPflash tool (dont plugin cable and phone to PC), just open flashtool and WARNING on tab Format, don’t Format if u don’t know how to use for what purpose! Cause if u format ur imei phone has gone :v…and u will find and learn how to use S/N tool or even bring it to change mainboard :v…. So DONT, just focus on tab Dowload.
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
6/ Congratulation! Ur phone back to Factory come out . hold the power button and ENJOY ur phone reborn .
*Note: during time flashing ROM, do not plugout cable.
Thanks for your reading!If u like this,give me 1 Thanks . Welcome all constructive comments to help me edit this topic more complete.
Click to expand...
Click to collapse
everything you said is right except for you have to keep the battery inside and the phone switched
this will help
https://www.youtube.com/watch?v=W-bBhe3kp_8&t=327s

Will root will run on xt1700?
As in the title - Will the TWRP work with the XT1700?

Alcatraz_91 said:
everything you said is right except for you have to keep the battery inside and the phone switched
this will help
&t=327s
Click to expand...
Click to collapse
Bro my phone is vibrating and showing Moto logo and again vibrating and showing Moto logo...so I'm thinking that my phone is soft bricked after flashing twrp 3.1.1
When I try to flash stock using sp flash tool some error is showing 0*00... Will u plzzz help to get back my device..:crying::crying:

My internal storage is about nill...
But it is showing about 14 GB and the actual storage is now 774 mb....how to format it...I'm unable to format it with twrp plzzz help...it is showing storage is running out....plzzzzzz help me....

Manoj Kumar 9779 said:
My internal storage is about nill...
But it is showing about 14 GB and the actual storage is now 774 mb....how to format it...I'm unable to format it with twrp plzzz help...it is showing storage is running out....plzzzzzz help me....
Click to expand...
Click to collapse
Please do not private message me asking for help/assistance with your problems.
I will help anyone if asked correctly, in the correct way and in the correct place.
I will not answer to demanding messages or messages giving no information what so ever.
I'm a typical user, not a helpdesk.
You question is answered in this thread and the Q and A section.

Not able to roote3 power with build s144
Hi,
I have moto e3 power with build number xt1706_s144_170915_row. When i am rooting and installing twrp through fastboot method, after rooting the phone goes in bootloop. The same issue was happening with build s143, however i was able to successfully root for previous build s141. I am following the same method but failing now. Any help will be great

It's my first phone that I will root (moto e3 power)
But the main problem is that, I can't unlock the bootloader , i have used adb driver but after the "fastboot devices" command , my phone's starts in fastboot mode but the connection with my PC is lost. , so please give me the link of the minimal adb and the other moto e3 power driver that you have used to unlock

Jackyhost said:
It's my first phone that I will root (moto e3 power)
But the main problem is that, I can't unlock the bootloader , i have used adb driver but after the "fastboot devices" command , my phone's starts in fastboot mode but the connection with my PC is lost. , so please give me the link of the minimal adb and the other moto e3 power driver that you have used to unlock
Click to expand...
Click to collapse
STOCK ROM INSTALLATION WITH TWRP RECOVERY
Check this video
Without wiping your imei no flash stock rom
This method is find by me please share to others
:good:
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
jigar191089 said:
Hi,
I have moto e3 power with build number xt1706_s144_170915_row. When i am rooting and installing twrp through fastboot method, after rooting the phone goes in bootloop. The same issue was happening with build s143, however i was able to successfully root for previous build s141. I am following the same method but failing now. Any help will be great
Click to expand...
Click to collapse
STOCK ROM INSTALLATION WITH TWRP RECOVERY
Check this video
Without wiping your imei no flash stock rom
This method is find by me please share to others
:good:

Note :-
It works only on S135 and S141
It does not work with S143 and S144
I don't know why

hey 'fastboot format userdata' command not working.. it says "Createprocess failed: system cannot find file specified. (2) cannot generate image for userdate" Kindly help I am noobie

kunal0303 said:
hey 'fastboot format userdata' command not working.. it says "Createprocess failed: system cannot find file specified. (2) cannot generate image for userdate" Kindly help I am noobie
Click to expand...
Click to collapse
use this adb... i too had the same issue......... it worked for me.....
https://forum.xda-developers.com/showthread.php?t=2588979

HELP!!!
i cant execute "fastboot reset userdata" it shows "cant find file specified" please help someone

bopvnn said:
Firstly, I want to say ‘thankyou’ to pranaay saini and dr.faramroze. u guys are first man who post topic guide root and build specialy TWRP for Moto E3 Power. And now, I want to share my story about my process ‘rooting Moto E3 Power’ LoL :
*Note:
1/ Im a newbie, not a specialist about android phone or technician mobile. I just a person who curious ‘rooting android’ to make my phone can delete almost factory app not neccesary.LoL. Truly, I want to cheat mobile game =)).
2/ I had successful root HTC One M7 before, so Let’s see me have a little exp for Rooting . Then own the new Moto E3 Power and I want do the same HTC .
*My story:
I bought the new E3 Power on online store and Im going to root it. Unluckily, I forgot to ‘fastboot format userdata’ and this phone gonna ‘bootloop’ :v. I bring it to fix in small repair phone center (I already give them the stock rom), hope they can flash rom stock but they turn my phone into ‘hard bricked mode’ :v, less well they format S/N @@.
That’s a awful time in my life =)), I sent it back to store. Luckily, they accept to fix it cause I just used it for 2 days (actually I told them it was factory error) and maybe they believe it true ‘opsss! So sorry’.
After my phone fixed, I root it again, and this time I did really carefully so ‘Your device has rooted’ Bravo! =)). And ‘Peaceful time’ long last 4months, I just install SDMaid and run Luckypatcher to crack SDMaid FREE up to SDMaid PRO, and used SDMaid to cleanup the phone, then my phone run to error ‘com.android.phone had stoped’, and I also find many ways to fix this problem, almost solution on the internet I have try but it’s not working, the finnally option, I chose to ‘reset phone to factory’ . OOOPS! My phone got ‘Soft bricked’ =.=,unfortunately I had deleted file TWRP backup @@, then I tried to flash stock rom thought TWRP but it error =.=. At this moment, I think ‘prehap I bring it to store fix it again?’ . NOPE! Im looking on the internet to find out solution to fix it (just a few days before I write this topic), finally only way to fix that is ‘SP Flash Tool’ =)), and it work! .
*So it’s all my story when I come to E3 GOD Power =)). Sorry if it so drammatic and bad english :”>. U guys can skip that and go to Main Problem here:
== How to root Moto E3 Power (XT1706) ==
Plz follow step by step if u are new guys like me xD! (Picture guide bellow)
1/ Prepare: ADB (or minimal ADB) and ADB driver on ur PC (u can search on XDA forum to get link download – I recommend use minimal ADB).
2/ Get TWRP recovery and SuperSU from this link:
https://forum.xda-developers.com/showpost.php?p=69311942&postcount=22
copy file SuperSU to SDcard.
3/ On your phone, go to Setting > Choose About phone > roll down to last line > tap many times to set u up to Developer > then back so now u can see ‘Developer options’ line > go into it > swipe ON OEM Unlocking and USB Debugging.
4/ Now turn off power, after screen off hold Power button and Up Volume to boot ur phone into ‘fastboot mode’.
5/ Connect ur phone to PC and open ADB u install before (open ADB as administrator)
6/ Copy file TWRP recovery (*.img) u have download into folder ADB u install before. U can rename it to remember and type on ADB easier. (to me: rename it to recoverymoto.img)
7/ Execute the following comand on ADB:
- ‘fastboot devices’ >> its show u ur device connected to PC or not. If not, plz check adb driver.
- ‘fastboot oem unlock’ >> now on ur display phone have announce unlock YES/NO? follow instruction on display phone. YES to unlock.
- ‘fastboot format userdata’ >> make sure u do this command cause if not after u flash TWRP recovery and reboot system u gonna to stuck boot or boot loop.
- ‘fastboot flash recovery recovery.img’ >> its change Default recovery to TWRP recovery.
Well done! Now u successful to install TWRP.
8/ Now hold Power button and Up Volume to boot ur phone into ‘fastboot mode’ but not choose Fasboot mode, choose Recovery mode. It gonna turn into TWRP recovery display.
9/ Last step. In TWRP working display > choose Install > Select microSD > then u see file SuperSU in SDcard u copy in step 2 > choose file SuperSU and install it > after all done, reboot system and ENJOY ‘Your device has rooted’ .
*Note: If u reboot, it stuck at Moto logo, or boot loop. Plz Redo Step 4 to Step 9. If not, u need to comment and me and E3 power brother will help u
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
2/ Prepare MTKdriver (MediaTek driver) for ur PC, u can download on this link:
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
https://androidmtk.com/download-mtk-usb-all-drivers
3/ After install all, open SPflash tool (dont plugin cable and phone to PC), just open flashtool and WARNING on tab Format, don’t Format if u don’t know how to use for what purpose! Cause if u format ur imei phone has gone :v…and u will find and learn how to use S/N tool or even bring it to change mainboard :v…. So DONT, just focus on tab Dowload.
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
6/ Congratulation! Ur phone back to Factory come out . hold the power button and ENJOY ur phone reborn .
*Note: during time flashing ROM, do not plugout cable.
Thanks for your reading!If u like this,give me 1 Thanks . Welcome all constructive comments to help me edit this topic more complete.
Click to expand...
Click to collapse
From where i can download fastboot file??

bopvnn said:
Firstly, I want to say ‘thankyou’ to pranaay saini and dr.faramroze. u guys are first man who post topic guide root and build specialy TWRP for Moto E3 Power. And now, I want to share my story about my process ‘rooting Moto E3 Power’ LoL :
*Note:
1/ Im a newbie, not a specialist about android phone or technician mobile. I just a person who curious ‘rooting android’ to make my phone can delete almost factory app not neccesary.LoL. Truly, I want to cheat mobile game =)).
2/ I had successful root HTC One M7 before, so Let’s see me have a little exp for Rooting . Then own the new Moto E3 Power and I want do the same HTC .
*My story:
I bought the new E3 Power on online store and Im going to root it. Unluckily, I forgot to ‘fastboot format userdata’ and this phone gonna ‘bootloop’ :v. I bring it to fix in small repair phone center (I already give them the stock rom), hope they can flash rom stock but they turn my phone into ‘hard bricked mode’ :v, less well they format S/N @@.
That’s a awful time in my life =)), I sent it back to store. Luckily, they accept to fix it cause I just used it for 2 days (actually I told them it was factory error) and maybe they believe it true ‘opsss! So sorry’.
After my phone fixed, I root it again, and this time I did really carefully so ‘Your device has rooted’ Bravo! =)). And ‘Peaceful time’ long last 4months, I just install SDMaid and run Luckypatcher to crack SDMaid FREE up to SDMaid PRO, and used SDMaid to cleanup the phone, then my phone run to error ‘com.android.phone had stoped’, and I also find many ways to fix this problem, almost solution on the internet I have try but it’s not working, the finnally option, I chose to ‘reset phone to factory’ . OOOPS! My phone got ‘Soft bricked’ =.=,unfortunately I had deleted file TWRP backup @@, then I tried to flash stock rom thought TWRP but it error =.=. At this moment, I think ‘prehap I bring it to store fix it again?’ . NOPE! Im looking on the internet to find out solution to fix it (just a few days before I write this topic), finally only way to fix that is ‘SP Flash Tool’ =)), and it work! .
*So it’s all my story when I come to E3 GOD Power =)). Sorry if it so drammatic and bad english :”>. U guys can skip that and go to Main Problem here:
== How to root Moto E3 Power (XT1706) ==
Plz follow step by step if u are new guys like me xD! (Picture guide bellow)
1/ Prepare: ADB (or minimal ADB) and ADB driver on ur PC (u can search on XDA forum to get link download – I recommend use minimal ADB).
2/ Get TWRP recovery and SuperSU from this link:
https://forum.xda-developers.com/showpost.php?p=69311942&postcount=22
copy file SuperSU to SDcard.
3/ On your phone, go to Setting > Choose About phone > roll down to last line > tap many times to set u up to Developer > then back so now u can see ‘Developer options’ line > go into it > swipe ON OEM Unlocking and USB Debugging.
4/ Now turn off power, after screen off hold Power button and Up Volume to boot ur phone into ‘fastboot mode’.
5/ Connect ur phone to PC and open ADB u install before (open ADB as administrator)
6/ Copy file TWRP recovery (*.img) u have download into folder ADB u install before. U can rename it to remember and type on ADB easier. (to me: rename it to recoverymoto.img)
7/ Execute the following comand on ADB:
- ‘fastboot devices’ >> its show u ur device connected to PC or not. If not, plz check adb driver.
- ‘fastboot oem unlock’ >> now on ur display phone have announce unlock YES/NO? follow instruction on display phone. YES to unlock.
- ‘fastboot format userdata’ >> make sure u do this command cause if not after u flash TWRP recovery and reboot system u gonna to stuck boot or boot loop.
- ‘fastboot flash recovery recovery.img’ >> its change Default recovery to TWRP recovery.
Well done! Now u successful to install TWRP.
8/ Now hold Power button and Up Volume to boot ur phone into ‘fastboot mode’ but not choose Fasboot mode, choose Recovery mode. It gonna turn into TWRP recovery display.
9/ Last step. In TWRP working display > choose Install > Select microSD > then u see file SuperSU in SDcard u copy in step 2 > choose file SuperSU and install it > after all done, reboot system and ENJOY ‘Your device has rooted’ .
*Note: If u reboot, it stuck at Moto logo, or boot loop. Plz Redo Step 4 to Step 9. If not, u need to comment and me and E3 power brother will help u
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
2/ Prepare MTKdriver (MediaTek driver) for ur PC, u can download on this link:
https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
https://androidmtk.com/download-mtk-usb-all-drivers
3/ After install all, open SPflash tool (dont plugin cable and phone to PC), just open flashtool and WARNING on tab Format, don’t Format if u don’t know how to use for what purpose! Cause if u format ur imei phone has gone :v…and u will find and learn how to use S/N tool or even bring it to change mainboard :v…. So DONT, just focus on tab Dowload.
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
6/ Congratulation! Ur phone back to Factory come out . hold the power button and ENJOY ur phone reborn .
*Note: during time flashing ROM, do not plugout cable.
Thanks for your reading!If u like this,give me 1 Thanks . Welcome all constructive comments to help me edit this topic more complete.
Click to expand...
Click to collapse
Awesome post brother! I only wish I had simply read this post before messing up so much with my phone. Actually, I was messing with some magisk module (edxposed) whick bricked my device and got me stuck at a bootloop and with no recovery partition at all. (It erased my TWRP). So I used the sp flash tool and formatted the whole flash (at that time, I hadn't read this post of yours). Then I flashed my entire firmware back via the sp flash tool. So I thought that now my problem was fixed. But when I switched on my phone I saw my phone's IMEI Number gone! And the sim not working and showing invalid IMEI message. So I tried to find a fix on the internet and I found 2 solutions. First was using an app which requires the phone to support some mtk engineering mode. I followed the instructions and realised that maybe our phone Moto E3 Power doesn't support this mode. So I switched to the second solution, which required root access. So then I set off for rooting my newly unbricked phone. But I again did some mistakes:
1.) Allowed usb debugging and OEM unlocking in my phone's developer options in settings.
2.) I installed minimal ADB v1.4.3 on a windows 10 computer. Checked my phone's connection with the PC via ADB command adb devices. It worked showing some error initially (daemon not started.... Starting daemon...) and then showing some hex code signifying my device's successful connection with the PC.
3.) Used ADB command adb reboot bootloader to boot into fastboot mode. It worked too.
3.) Used fastboot command fastboot devices to check if my device is still being recognised as connected to the pc. Here came an error (the command didn't return any hex code like the adb command adb devices did. So I googled a solution which involves updating the "Android ADB interface" to "Android Bootloader interface" in the "Android device" submenu of the "Device Manager" window of the "control panel" of the pc, by updating its drivers using the "latest windows usb drivers" 8mb file which could be found very easily on the internet (searching solution for fastboot device drivers update on Google). {*Note: If you hadn't installed beforehand, any adb and fastboot drivers at all, then you will see "Other devices" submenu instead of the "Android device" submenu in the device manager window.
Also, you compulsively need to be in fastboot mode with your device attached to pc, in order to see this "other devices" submenu.} So now the fastboot devices command started working by showing the hex code like adb devices command did.
4.) Used fastboot oem unlock command to unlock the phone's bootloader. Pressed the volume up button of my phone as instructed by the warning message on my phone's screen. Unlock flow started in the minimal adb window in my pc. Finished successfully within 9-13 seconds. Another mistake now, after unlocking the bootloader, I forgot to format userdata.. Actually I didn't know about the fastboot format userdata command. I thought the fastboot -w reboot is the only way to format userdata (which wasn't working for me). Unaware of the fact that now I was going to experience a bootloop during rebooting my phone, I continued with the further steps.
5.) Used fastboot flash recovery recovery.img command to flash the unofficial twrp img which I had already placed in the minimal adb folder and renamed to recovery.img I used unofficial twrp v3.1.1 (by moderator) [which was working perfectly earlier on my phone] {link at bottom}. Successfully finished this step too. [You can use either of the two twrp: Dr. Faramroze (link provided by op) or moderator (link provided by me). Both are working fine]
6.) Used the fastboot reboot command (although it never works for me). It shows finished in the minimal adb cmd screen but the phone doesn't reboot. So I manually unplugged the device. Removed and reinserted the battery.
7.) Now rebooted to recovery screen and found the unofficial twrp successfully installed. [ Warning: After the 6th step, don't reboot your phone normally. Instead, boot into the fastboot window [hold power + vol. up] and select the boot into recovery option. This is required only for the first boot up process or else if you do a normal boot during the first boot, the stock recovery replaces our recently flashed custom recovery..
8.) Upon entering the twrp recovery during the first boot, I installed the magisk v19.3 zip I had in my external SD card. It's not necessary to root your phone right now, you may even do it later by simply rebooting from within the twrp, and later on entering recovery after your phone is all set and working and when you're free from other hassles. But I went for rooting during the first boot. And encountered an error something like: "Cannot mount data(0mb)" at the second last line. So, I could not root my phone. So I decided to root it later on and currently just have it switched on. So, I went for the reboot option in twrp.
9.) My phone started rebooting and got stuck at the boot screen with the tag Device unlocked at the lower left corner (indicating unlocked bootloader). But this was something familiar to me, I had already dealt with this error the previous time I rooted my phone. The solution was very simple. I just had to flash a no verity-otp-encrypt.zip file {included along with the twrp link} using the twrp recovery and then my device would boot properly, as it did the last time.
10.) I flashed the no verity-otp-encrypt.zip file from the twrp and got so many red line errors during the flash. (This didn't happen the last time). Every error had the same words, "cannot mount data (0mb)". So I went back to try rebooting again.
11.) Started rebooting again. This time the device didn't get stuck at boot screen, rather it went into a bootloop, rebooting again and again. Now maybe the no verity-otp-encrypt.zip file did its job and my device got free from the stuck at boot screen problem but simultaneously got caught by the bootloop error probably created due to not formatting the userdata after unlocking the bootloader. Or maybe the "cannot mount data (0mb) just ruined up my phone. Whatever the cause be, I just went for reflashing the entire firmware via the sp flash tool and temporarily forgetting all the bootloader unlocking, custom recovery, rooting, etc and live with an invalid IMEI phone without a working sim, until I find a solution on the internet.
12.) And then, I ended up here on this thread leaving my experience, and learning my mistakes from the OP's post. Very soon I will depart for the cyber cafe to try again without any mistakes this time.
At last thanks for this awesome thread.
And yes here's the link for the unofficial twrp 3.1.1 (by moderator) & the no verity-otp-encrypt.zip file:
https://drive.google.com/folderview?id=1-CHJtDUyPH1CJHebhKsUJz8SzKJAcDbv
---------- Post added at 12:56 PM ---------- Previous post was at 12:41 PM ----------
smug_loner said:
From where i can download fastboot file??
Click to expand...
Click to collapse
Search Google for "Moto E3 power firmware flash file" and you will come across websites providing the flash file. The file would have a name like "Motorola_Moto_E3_Power_XT1706_MT6735M_S135_161108_6.0.1.zip". The "S135" over here is the firmware version and will vary upon the version uploaded by the site. The latest version as of today is S152_190315. I somehow managed to download a S151 file and I forgot where I downloaded it from. But you can still go for older firmware versions, and then when you're done with all the flashing and rooting and all that and your phone starts up without any error, you can go for OTA updates from within the settings>about phone>system update.

bopvnn said:
== How to unbricked Moto E3 Power (XT1706) ==
Plz follow step by step (Picture guide bellow)
1/ Prepare Stock ROM and SP Flash tool, u can download on this link and the extract it:
https://firmwarefile.com/lenovo-xt1706?_e_pi_=7,PAGE_ID10,9894486982
(ROM S135 is newest for XT1706)
Click to expand...
Click to collapse
S151 is newest (flash file available for download) for XT1706. [Actually S152 is latest but it's not yet available for download] So you succeeded maybe because you used the older version. Cause a guy commented that he couldn't root the newer versions but could root the older versions.
---------- Post added at 02:32 PM ---------- Previous post was at 02:25 PM ----------
bopvnn said:
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
Click to expand...
Click to collapse
Is it necessary to uncheck preload? If yes, I think you should highlight it. Anyway, I didn't uncheck preload and the flash successfully worked for me? So what difference does it count for? Please do notify us of its significance.
---------- Post added at 03:03 PM ---------- Previous post was at 02:32 PM ----------
bopvnn said:
4/ Choose tab download, select Sccatter-loading file (u extract before). Uncheck Preload. Then click Download (u will see it proccessing).
5/ Then plugin ur cable and phone into PC (*note: remove ur battery, sim card and microSD before plugin). Now u will see SP flash tool regconize ur device and auto flash ROM to ur device. Keep wait for 2~3mins till it show check V green symbol. Now u can plugout cable.
Click to expand...
Click to collapse
I didn't remove my battery, sim or microsd card and everything worked fine for me. Also, I didn't connect my device to pc after pressing the download button in the sp flash tool. Here's what I did instead:
I kept the sp flash tool ready with all steps. Only pressing the download button remaining. Then I connected my device to the pc. As soon as you hear the device connected sound, press the download button. And the flashing process will start. If you get late in pressing the download button, you will hear another sound of device disconnected. Then you'll have to remove the usb from the device and replug it and go for trying again pressing the download button as soon as you hear the device connected sound.

Huawei P8 Lite Unlock Bootloader, Convert L23 In L21, Upgrade To Android 6 Official +

# SUPPORT HUAWEI P8 LITE
Huawei P8 Lite Unlock Bootloader, Convert L23 In L21, Upgrade To Android 6 Official + Install Custom Roms, Recoverys, Rootear, And Many Many Things - April 27, 2017 Updated.
IMPORTANT! This Tutorial describes the steps and order needed to Update the Huawei P8 Lite L23 or L21 to a newer version of Android. Everything in a single tutorial so that they are not looking for each step separately, It is explained as practical as possible, even if they do not do it well. Re-read and try it as many times as necessary or ask if they can not, if not As they go for a beer and tacos, they relax and try again later.
If you do not feel ready or deplaned you do not have the slightest idea of ​​what is posed in this tutorial better leave your cell phone like this, if you have your cell phone you use for the necessary so leave it, dedicate yourself to investigate terms that you do not understand Even, do not try to "run without first learning to walk", you are not going to return Millionaire, nor are you going to become more handsome, strong, nor will you be the most intelligent or interesting, nor will you return immortal solo by Update your phone to Android 6 , So be patient, be aware and do not accelerate. At the moment you decide to continue with this Tutorial, you become absolutely responsible for what happens with your Mobile and your actions. Please proceed with caution and do not play chingon.
HERE THE ODYSEA BEGINS!
<<< UNLOCK BOOTLOADER >>>
IMPORTANT:
To know the Model Number & IMEI:
Enter Settings> About Phone.
To Know the Serial Number:
Enter Settings> About Phone> Status
To Know Product ID:
Enter this code: "* # * # 1357946 # * # *" ​​on the telephone dial (without quotes), the number that appears, is the PRODUCT ID.
You can Obtain the Code to unlock the Bootloader in the following ways:
Following in the footsteps of EloyGomez Video Tutorial:
Https://www.youtube.com/watch?v=AVmAEQjOnNQ
---------------------------------------------------------------------------------------------------------
Following the Steps of the Screenshots having already a previous orientation with the Video of EloyGomez:
Https://plus.google.com/u/0/photos/+JohnMillerDev7/albums/6305181114976401569
Using "Huawei Product ID Generator", and following the instructions (I recommend copying the data obtained in a notebook and saving them, you never know when you may need them again):
Download "Huawei Product ID Generator", extract it wherever you like and run it. (It's a very simple program).
Product Model: HUAWEI Y300-0000 (select that model).
Product IMEI / MEID: "Here they place their IMEI / MEID".
Product ID: "Here you generate the Product ID automatically according to the Product model & product IMEI / MEID that they placed above, and it is the one they should use on the page"
Go to the Huawei page to unlock Bootloader, either the English version or the Chinese version, the only thing that changes is the language. You can try with all 2 pages.
They create an account so they can log in, they can also log in with Facebook, it's very simple.
Once you have created your account and logged in, we will see the page to obtain the unlock code.
Fill in the fields with the data that we are requested and we will put the following:
Product type: Smartphone
Product model: HUAWEI Y300-0000 (If it does not work for them, try all the models that are in the generator) (Also try with CAPITAL & lowercase).
Product Serial number: You get it in Settings> About Phone> Status> Serial Number.
Product IMEI: You get it in Settings> About Phone> Status> IMEI.
Product ID: They get it with the "Huawei Product ID Generator" (the one that generated the program a while ago).
They place the Captcha that asks them for the page and they press Submit or Submit, they must give them the Code of Unlock for the Bootloader, they copy it in the scrapbook (that I suppose they must take).
Now go to Settings> About Phone and click on "Compilation" several times until the message "now you are a developer" is muted, you return to Settings and you will see the "Developer Options" tab, enter there, if the options are not active Of developer because they activate them, now they move a little down and activate "Depuracion USB".
Download the program "UNLOCK BOOTLOADER HUAWEI", Extract where you like, then connect your phone to the PC and run "UNLOCK THE BOOTLOADER.bat".
Already the rest is eaten, just follow the instructions that will indicate the program, the ADB & HiSuite Drivers will be installed (At most, they will only have to accept the terms, press next and finish), the Telephone will restart a few Sometimes do not worry or despair do not panic, it will be normal to restart.
When they have unlocked the Bootloader they can disconnect the Phone from the PC and turn it off.
Now let's check that everything went well, we kept pressing "Vol-" and at the same time we connected it to the PC, they will see a white screen with some letters (that is the Fastboot mode), and if they see the text "PHONE UNLOCKED" Congratulations, you have unlocked the bootloader correctly.
Make a beer, a soda, a Pau-Pau or Commit a Bread to celebrate, but do not get so excited because this is only the beginning, we still have a way to go, but certainly This is the most important step of all, Since without having the Bootloader unlocked it is not at all advisable to make Root to the phone, to install a recovery or to install a custom Rom, Those that use KingRoot for that after that they appear rare errors to them and even it damages them the telephone.
---------------------------------------------------------------------------------------------------------
OFFICIAL HUAWEI PAGE TO OBTAIN THE BOOTLOADER UNLOCK CODE:
Https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
OFFICIAL PAGE OF HUAWEI IN CHINESE VERSION TO OBTAIN THE BOOTLOADER UNLOCK CODE:
Https://www.emui.com/plugin.php?id=unlock&mod=detail
TOOLS YOU SHOULD DOWNLOAD:
Unlock bootloader huawei: https://mega.nz/#!uRkC2DQS!R2IMpEpUAtrDH4-Gi4VLi8Mcz5_h98jtKsBATpMBQYg
Huawei Product ID Generator: https://mega.nz/#!eE81BbrT!_JBTy1ZCdFuYd7JwFLnaQe06I47ua__hEa4GHx6PZvM
If the PC does not recognize the phone even after the program installs the ADB Drivers automatically, then download, extract and install these, it is not at all complicated just connect your phone to the pc.
Run the programs just follow the instructions and you're done. You may have to press Next, Finish, "Y" or "ENTER".
Https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
---------------------------------------------------------------------------------------------------------
<<< CONVERT L23 IN L21 >>>
(If they already reached this step means that they are already Pros .... hahahaha not true, they believed it!, Keep reading!)
At this point what we will do first is to install the Recovery TWRP and make the Wipes Complete with the purpose of Erase the system and leave the Phone blank to make a Installation much Cleaner and without possible errors. To do this we follow the following instructions:
PS: They can install the Twrp that like V2 or V3, the procedures are the same, only slightly changes the interface.
Instructions for both versions:
Download INSTALAR RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.rar
Download adb-setup-1.4.3.rar
Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
Start your Phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
Unzip "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.rar" and execute the file "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.bat" and follow the steps.
It will not take more than 5 minutes just to press ENTER.
Turn off Cell Phone and Start in Recovery Mode TWRP (Vol + & Power), Press WIPE, Advanced Wipe and make the complete wipes:
You must dial:
Dalvik
Cache
Data
Internal storage
System
IMPORTANT !: Do not check "micro sdcard".
Go back to Menu, press Reboot, and then Bootloader.
Files:
TWRP V2:
Https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3:
Https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
ADB:
Https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Once the above is done correctly, we continue to move our P8 Lite L23 to L21, I recommend you remove your SD Card and SIM Card as a precaution. Follow the instructions:
Download "FlashRom C432B052 (Lollipop 5.0, EMUI 3.1) Dual Sim Transition", extract it wherever you like, start your phone in Fastboot mode, connect it to the PC, execute the file "FLASH-ALL.bat" (do not execute it with permissions Administrator), and follow the instructions given to you by the program.
When the process ends, the phone will start with the new system, if you go to "About the phone" it will say "Balong". To remove that you must install Step2.
Download "Step2", extract it, look for the file "UPDATE.APP" and copy it to the "DLOAD" folder of your SD Card, if you do not have it then create it. (It is clear that you must first insert the SD into the phone).
Then go to Settings> Updater> Menu> Local Update and select the UPDATE.APP (Step2). The phone will restart, the installation will begin and wait for it to finish. When you start the system and check in "About the phone" you will no longer say Balong, but L21.
After this it is recommended to do a factory reset, first remove your SD card, then go to "Settings> Security> Backup and Restore" or type in the search bar of "Backup and Restore" settings, press "Reset factory data "Check" Clear internal memory ", click on" Reset "and wait for the process to finish. If for some reason "Failed" does not worry, it only restarts, the cell will have been reset anyway, do not worry if you do not have a signal or it does not detect the SIM, that is fixed by installing the next update.
Congratulations, you've already passed your cel to L21!
Files:
FlashRom C432B052: https://mega.nz/#!LQNimCgQ!oq2C_Gwvwv7zoigo8GR2kstPdHDO5ESJ9Qglv_2UERs
Step2: https://mega.nz/#!vdsDEZSb!3FIgh6WNgP4NWRfnGoDxisd1wAQk3CBPKdKl8_If-v0
---------------------------------------------------------------------------------------------------------
<<< UPDATE ANDROID 6 OFFICIAL >>>
The update order is as follows: "B052> B560> B564> B574> B584> B594> B596> B598> or" B552> B570> B560> B560> B564> B574> B584> B594> B596> B598 ".
Being already in the B052 we only have to download the following Compilations and go updating via local:
"B552> B570> B560> B564> B594> B594> B594> B596> B598 'or' B552> B570> B560> I recommend that for every update they make, make a factory reset to avoid possible errors, this is optional after all, I only make the recommendation from their own experience.
Download the B170, extract the files, Copy the UPDATE.APP to the DLOAD folder of your SD, go to Settings> Updater> Menu> Local Update and select the UPDATE.APP, the phone will restart, the installation will begin and wait for To finish.
Now on the B170, Repeat the previous step to install the B550 or B560 Compilation. (Depending on the order of updating mentioned above, that works best for them or decide to take)
Now when they are in the B560 we go to the B564 but the option of "Local Update" will no longer appear, so we have 2 options to carry out the update: (they should already have the UPDATE: APP previously copied in the DLOAD, The update.app is always due to copying to Dload there is no other):
Option 1:
Write the following code in the calls app "* # * # 2846579 # * # *" ​​(without quotes obviously).
The famous hidden menu will appear, click on "Software Upgrade"> "SDCard Upgrade"> you will receive an "Are you Sure" message, press OK, start the update and wait for it to finish.
Option 2:
While the Cel is off or on, press the keys (Vol-, Vol +, Power) until you see the update screen and wait for the process to finish.
And that would be Todo, Felicidades ya habras updated Your phone to Android 6!
If you've already come up here means you're half Pro.
Official Roms (Local Via Installation):
ALE-L21C432B170
Https://mega.nz/#!eYUgxbrb!yccoxiIsXjIHdiGxdP6AU05S1fYQGNNMRba427BxEgs
ALE-L21C432B550
Http://download-c.huawei.com/download/downloadCenter?downloadId=78426&version=312720&siteCode=en
ALE-L21C432B560
Http://download-c.huawei.com/download/downloadCenter?downloadId=80469&version=319382&sit eCode=pl
Https://mega.nz/#!uRNRDRaA!zavgQtBakqdg_lbXmgoKwB7qotPoXOJvJofvnPlM1CI
ALE-L21C432B564
Https://mega.nz/#!kJkESTKT!1cGtLB0HxQN0x-KeyB2MqQ3JWeGEnvD2aKll7vsCa60
ALE-L21C432B574 - 2016.07.19
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v56678/f1/full/update.zip
ALE-L21C432B580
Https://mega.nz/#!2RUgxKiI!c-RX4wJsilZuxEDFwWJ2lcO-tpC4J5Q3uGbHUo4c1Vw
ALE-L21C432B584 - 2016.11.21
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v67128/f1/full/update.zip
ALE-L21C432B586 - 2016.12.13
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v69882/f1/full/update.zip
ALE-L21C432B588 - 2016.12.26
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v72428/f1/full/update.zip
ALE-L21C432B594 - 2017.02.28
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v77344/f1/full/update.zip
ALE-L21C432B596 - 2017.03.28
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v80333/f1/full/update.zip
ALE-L21C432B598 - 2017.04.20
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v83472/f1/full/update.zip
---------------------------------------------------------------------------------------------------------
<<< INSTALL CUSTOM ROMS, RECOVERYS, ROOTEAR, AND MANY MORE THINGS >>>
I have compiled a collection of various interesting contributions to facilitate your search, so check it out!
Http://www.htcmania.com/showthread.php?t=1310020
*
<< DRIVERS EXTRAS >>
Here I leave some extra drivers to solve problems with issues of fastboot, adb, in case the PC does not detect the mobile, the installation of each is very simple, just keep your cell connected to the pc, run the programs, you have to Give it to "next" and restart the PC if necessary.
Files:
Https://mega.nz/F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
And that's it, I hope I was clear and supported with this Tutorial,
Greetings from Mordor!
---------------------------------------------------------------------------------------------------------

Empty

Im trying to use huawei product id generator but I always get this message in unlock page
I tried with c8812 and Y300-000 and all have the same results.
ALE-L21
Please make sure the verification code and model number are correct. If your device has multiple IMEIs or MEIDs, please try another IMEI or MEID.

General [GUIDE][UNBRICK] Realme 8 Unbrick/Upgrade/Downgrade [RMX3085]

Hello everyone! So after the new MediaTek DAA and SLA protection bypasses you can find GitHub repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3085 (Realme 8) ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!
ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)
Requirements:
PC or Laptop
Internet connection
Realme 8
USB cable
Windows Method
Requirements:
Bypass Tools Pack - (DRIVER AND BYPASS FILES)
SP Flash Tool
Decrypted OFP (OPPO FIRMWARE PACKAGE) :
Indian
A.22 (Indian) - GDrive
A.24 (Indian) - GDrive
A.26 (Indian) - Gdrive
C.05 (Indian) - GDrive
C.09 (Indian) - GDrive
C.11 (Indian) - GDrive
Global
A.22 (Global) - GDrive
A.24 (Global) - GDrive
A.26 (Global) - GDrive
Install Python from Windows Store
libusb-win32 - Having Issues? Use this.
Get usbdk installer (.msi) from here and install it
Steps:
1) Extract the zip
2) Go to driver folder, find the .inf file right click and press install.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3) Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.
4) Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.
5) Choose MediaTek USB Port and install it.
6) Then run the brom.bat under Bypass folder.
7) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
8) After the above step Go into Flash Tool folder and open the SPFlash tool go to Options>Option
9) Click on Connections and select UART and set Baud Rate to 921600
10) After that choose scatter file and also if not set, set your download-agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
Select all the Partitions except opporeserve2 and cdt_engineering. otherwise you will get errors.
*11) If you want to flash super.img partition also then download this scatter.txt file and replace it with the another scatter file which is present in the decrypted firmware folder. After that select it again in sp flash tool.
Again Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!
After flashing it should look like this. Download has been complete. Enjoy!
"Congrats Now your Realme 8 is Unbricked "
Credits :
https://github.com/bkerler/ for decryptor and for creating the tool.
If you face any issues write them down below...

Some people having this problem so I want to add one more thing to the guide. If you are not having any issues related to boot then don't follow these steps.
After waiting more then 10 minutes, if it doesn't boot up/bootloop. Or shows DM-Verity corrupt error then do this.
1) Try boot into stock recovery by pressing volume up + power button after that when your screen flashes quickly unpress buttons.
2) Now press volume down + power button, by pressing these you will boot into stock recovery.
3) Go to format option and do a full format.
4) Your phone will definitely boot up after that.

Hi
I would like to ask how you obtained the system for realme 8 in the latest version.
Can you download somehow from your device?

HowWof said:
Hi
I would like to ask how you obtained the system for realme 8 in the latest version.
Can you download somehow from your device?
Click to expand...
Click to collapse
From realme offical site

Could you send a link because there is no information on the Polish realme site

HowWof said:
Could you send a link because there is no information on the Polish realme site
Click to expand...
Click to collapse
Realme 8 Firmware (RMX3085) - Realme Firmware
Realme 8 Firmware RMX3085 Official Flash File (Stock ROM). flash your phone using realme flashtool or MSM Download tool.
realmefirmware.com

if "Brick" occured in rooting process - then can recovery be done without data loss :
Prerequisite: firmware version on the body must the same as downloaded "Decrypted OFP" (as example both is A.22 )
HowTo:
at step of SPFlashing (currently that is 10-th)
- check ONLY next partitions in SPFlash to restore :
PRELOADER RECOVERY VBMETA LK LK2 BOOT
... and NO any of other
(as thats only are touched by currently described rooting processes)

after recovery exist on every boot:
"dm-verify corrupted..."
how to get out of this message?
Reset with clearing data not helps ...

DaLiV said:
after recovery exist on every boot:
"dm-verify corrupted..."
how to get out of this message?
Reset with clearing data not helps ...
Click to expand...
Click to collapse
Wait for 10mins if it didn't boot then.
Format with mtk client
python mtk e metadata,userdata,md_udc

that boots ... BUT
on every boot thet alerts about "corruption"
ok cleared partitions with python...
still the same alert ...

DaLiV said:
that boots ... BUT
on every boot thet alerts about "corruption"
ok cleared partitions with python...
still the same alert ...
Click to expand...
Click to collapse
Try booting into stock recovery and format from there

Ok. format from recovery menu solves ...
now that boots normally =
- no alert
-no boot allowing by pressing key required
good behaviour to see when boot subsystem altered, as at every boot alerted and required to press longer power button to confirm/allow starting ...
interesting, that is something new on mine (device versions) or overall ...

I have it anyway. have you solved it yet? Do I understand correctly?

after doing the insstruction, mine bootlooping and enters recovery mode

XCentrialG said:
after doing the insstruction, mine bootlooping and enters recovery mode
Click to expand...
Click to collapse
Maybe you missed some step. Can u explain ur problem briefly. What u did and what happened.

niki.rsb said:
I have it anyway. have you solved it yet? Do I understand correctly?
Click to expand...
Click to collapse
I Think that is not so solvable /possible if someone decode debug and finds /... but that is quite acceptable for rooting /if you don't want to make illegal spionage and so on/ ... also as if your device will be rooted by someone - you will see alert of changes on boot ... that is good ...
if you are rooted - you must be alerted .
but if you will going to stock rom and have protection - then flashing "stock" (surely without 3 partitions that IMEI-and-so-on-related ) and then format from recovery menu helps return to "factory" operation

Tony Stark said:
Maybe you missed some step. Can u explain ur problem briefly. What u did and what happened.
Click to expand...
Click to collapse
just a casual day to update my firmware, reboot and my phone refused to boot anymore, and then i came here, following all the steps very carefully (i read every steps twice so i dont make any mistake), and no luck.

XCentrialG said:
just a casual day to update my firmware, reboot and my phone refused to boot anymore, and then i came here, following all the steps very carefully (i read every steps twice so i dont make any mistake), and no luck.
Click to expand...
Click to collapse
There should be some mistake in your process. Because this guide is working and tested by many people.

Does global firmware have realme dialer instead of google dialer?
Can I flash Global firmware my indian device?

on your firmware package, it does not flashes super.img by default. Because in scatter file
- partition_index: SYS48
partition_name: super
file_name: super.img
is_download: false
changing false to true helps fixing destroyed super partition

How To Guide (Guide) Install TWRP + Root + Install Magisk + Bypass Safetynet

Please note, the TWRP image used IS NOT the official TWRP image.
I am not responsible for any any harm, such as bricking, or bootloops, which may happen to your device. This is what worked for me.
Warning
As stated by @beatbreakee , do not flash anything on a T-Mobile related device.
Please read beatbreakee's comment regarding this.
Warning
This has only been tested on Android 13. This guide may not work for other Android versions.
Prerequisites
Unlocked Bootloader
Magisk 25.2 Installation ZIP (see attached files)
TWRP Image (download from GDrive)
ADB and Fastboot tools are installed on your machine. Please see this guide
Android 13
Spoiler: Step 1 - Unlocking Bootloader
Step 1 - Unlocking Bootloader:
1.A - Enable OEM Unlocking:
1. Open Settings Application -> About device -> Version -> Tap on Build Number 7 times
2. Open Settings Application -> Additional Settings -> Developer Options
3. Enable OEM Unlocking
4. Enable USB Debugging
1.B - Entering Bootloader
The bootloader must be unlocked in order to flash the recovery.
Ensure the device is connected to the computer via ADB by entering the following command
Code:
adb devices
The output should be something similar to this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(note the device name on the left will not be the same)
Reboot into the bootloader by entering the following command:
Code:
adb reboot bootloader
1.C - Unlock
Once entered, enter the following command:
Code:
fastboot flashing unlock
WARNING: THIS WILL WIPE ALL DATA ON THE DEVICE
Use the volume keys to select unlocking, and then use the power button to confirm.
Once complete, enter the following command:
Code:
fastboot reboot
You will now have to go through the device setup.
Repeat steps 1.A and 1.B to enter back into the bootloader
Spoiler: Step 2 - Flashing TWRP
Step 2 - Flashing TWRP:
2.A - Entering Bootloader
Repeat steps 1.A and 1.B to re-enter the bootloader
2.B - Flashing TWRP:
Again, this IS NOT the official TWRP image. I am not responsible for any harm which this may cause to this device. That being said, it appears to be functional.
The image used is from a leak found on this XDA post
This is not a bootable image. You must flash. fastboot boot img will not work
Enter the following commands to flash the TWRP image:
Code:
fastboot flash recovery_a twrp.img
Code:
fastboot flash recovery_b twrp.img
Code:
fastboot reboot recovery
You should notice you are in TWRP.
You may need to change the language to English.
2.C - Changing TWRP Language:
1. Tap on the button on the Second column, Third Row
2. Tap on the World icon
3. Select your language
4. Tap on the button on the bottom right corner of your display.
2.D - Booting into your phone
1. Select Reboot
2. Select System
You should now have successfully booted in the system with TWRP installed as your recovery
Spoiler: Step 3 - Flashing Magisk
Step 3 - Flashing Magisk:
3.A Preparing the Device:
1. Move the Magisk-v25-2.zip to your device
2. Reboot into your recovery / TWRP
This can be done by entering the following ADB command:
Code:
adb reboot recovery
3.B - Flashing Magisk:
1. Tap Install
2. Select the Magisk-v25-2.zip
3. Swipe to flash (this may take some time)
4. Tap Reboot
5. Tap System
You should now enter the device
3.C - Installing Magisk APK
Install the Magisk APK, click here to download the APK.
Install the APK, and you should have root!
Spoiler: Fixing Data Backup [Optional]
If you encounter a createTarFork() exited with error 255, do the following:
1. Reboot into TWRP
2. Select File Manager
3. Navigate to /data
4. Copy /data/fonts into /sdcard/
5. Copy /data/nandswap into /sdcard/
6. Delete /data/fonts
7. Delete /data/nandswap
The error should now be resolved
The deleted files should not cause any issues. If any issues do occur, then promptly restore them using the backups made to /sdcard/.
Spoiler: Bypassing Safetynet [Optional]
Step - Bypassing Safetynet:
This is optional; however, highly recommend
Note, due to the nature of Safetynet, this can change at anytime and may begin failing in the future.
A - Repackaging Magisk
1. Launch Magisk Manager
2. Tap Settings Icon (Top Right Corner)
3. Tap "Hide The Magisk App"
4. Enter New Application Name
5. Click OK and wait
6. Uninstall original Magisk APK if it has persisted
B - Enable Zygisk & Deny List
1. Launch Magisk Manager
2. Tap Settings Icon (Top Right Corner)
3. Enable "Zygisk"
4. Enable "Enforce Deny List"
C - Configure Deny List
it is recommended to add any application you would like to hide from Magisk here
1. Launch Magisk Manager
2. Tap Settings Icon (Top Right Corner)
3. Tap "Configure DenyList"
4. Tap the 3 dots in the top right and select "Show System Apps"
5. Select the following applications:
~ Android System
~ Google Play Store
~ Google Play Services
~ Google Services Framework
D - Delete App Data
1. Launch Settings Application
2. Select Apps
3. Select App Management
4. Clear data for the following apps:
~ Google Play Store
~ Google Play Services
~ Google Services Framework
5. Reboot the device
E - Flash Universal Safetynet Fix
1. Download the Universal Safetynet Fix
2. Launch Magisk
3. Select Modules
4. Select "Install From Storage"
5. Select Universal Safetynet Fix
6. Wait for Flashing to complete
7. Reboot
F - Test Safetynet
1. Install YASNAC
2. Grant Super User rights
3. Select "Run Safetynet Attestation"
If both checks pass, you successfully have passed Safetynet!

PlasmaTornado said:
Please note, the TWRP image used IS NOT the official TWRP image.
I am not responsible for any any harm, such as bricking, or bootloops, which may happen to your device. This is what worked for me.
Prerequisites
Unlocked Bootloader
Magisk 25.2 Installation ZIP (see attached files)
TWRP Image (download from GDrive)
ADB and Fastboot tools are installed on your machine. Please see this guide
Step 1 - Unlocking Bootloader:
1.A - Enable OEM Unlocking:
1. Open Settings -> About -> Tap on Build Number 7 times
2. Open Developer Settings
3. Enable OEM Unlocking
4. Enable Android Debugging Bridge (ADB)
1.B - Entering Bootloader
The bootloader must be unlocked in order to flash the recovery.
Ensure the device is connected to the computer via ADB by entering the following command
Code:
adb devices
The output should be something similar to this:
View attachment 5792895
(note the device name on the left will not be the same)
Reboot into the bootloader by entering the following command:
Code:
adb reboot bootloader
1.C - Unlock
Once entered, enter the following command:
Code:
fastboot oem unlock
WARNING: THIS WILL WIPE ALL DATA ON THE DEVICE
Then finally:
Code:
fastboot reboot
You will now have to go through the device setup.
Repeat steps 1.A and 1.B to enter back into the bootloader
Step 2 - Flashing TWRP Image:
2.A - Entering Bootloader
Repeat steps 1.A and 1.B to re-enter the bootloader
2.B - Flashing TWRP:
Again, this IS NOT the official TWRP image. I am not responsible for any harm which this may cause to this device. That being said, it appears to be functional.
The image used is from a leak found on this XDA post
! It is HIGHLY recommended that you boot into the twrp.img before flashing to ensure that TWRPworks . I did not, but I recommend you do. !
To test this, enter the following command:
Code:
fastboot boot twrp.img
Enter the following commands to flash the TWRP image:
Code:
fastboot flash recovery_a twrp.image
Code:
fastboot flash recovery_b twrp.image
Code:
fastboot reboot recovery
You should notice you are in TWRP.
You may need to change the language to English.
2.C - Changing TWRP Language:
1. Tap on the button on the Second column, Third Row
2. Tap on the World icon
3. Select your language
4. Tap on the button on the bottom right corner of your display.
2.D - Booting into your phone
1. Select Reboot
2. Select System
You should now have successfully booted in the system with TWRP installed as your recovery
Step 3 - Flashing Magisk:
3.A Preparing the Device:
1. Move the Magisk-v25-2.zip to your device
2. Reboot into your recovery / TWRP
This can be done by entering the following ADB command:
Code:
adb reboot recovery
3.B - Flashing Magisk:
1. Tap Install
2. Select the Magisk-v25-2.zip
3. Swipe to flash (this may take some time)
4. Tap Reboot
You should now enter the device
3.C - Installing Magisk APK
If for some reason the Magisk Installer did not install the Magisk APK, click here to download the APK.
Install the APK, and you should have root!
Click to expand...
Click to collapse
Good post but one problem...to unlock is " fastboot flashing unlock"

Canuck Knarf said:
Good post but one problem...to unlock is " fastboot flashing unlock"
Click to expand...
Click to collapse
Of course! Thank you, used to the old way of unlocking

I wonder about any major issues with this TWRP as of now. Updating ZIP OOS13 with flashing magisk direclty is working etc.?

kouzelnik3 said:
I wonder about any major issues with this TWRP as of now. Updating ZIP OOS13 with flashing magisk direclty is working etc.?
Click to expand...
Click to collapse
Following the method created by @dladz should still work perfectly fine!
There could still be issues with this TWRP as this is not an official image.
AFAIK Switching ROM is still untested, but decryption, backups and flashing are all confirmed working, which for me makes me feel significantly more comfortable

I won't switch ROMs as there aren't any, so this is ok. I was just asking if installing official OOS updates can be done via twrp now with flashing magisk right after for example.
But I glad decryption, backups and flashing zips working fine now. This is great news!

kouzelnik3 said:
I won't switch ROMs as there aren't any, so this is ok. I was just asking if installing official OOS updates can be done via twrp now with flashing magisk right after for example.
But I glad decryption, backups and flashing zips working fine now. This is great news!
Click to expand...
Click to collapse
This has yet to be tested but I have high hopes! If anyone could confirm in the near future it would be fantastic!

PlasmaTornado said:
This has yet to be tested but I have high hopes! If anyone could confirm in the near future it would be fantastic!
Click to expand...
Click to collapse
I will try factory wipe...flash flash from 2213...to 2215...might work

Canuck Knarf said:
I will try factory wipe...flash flash from 2213...to 2215...might work
Click to expand...
Click to collapse
Fantastic news. Let us know the results!

i wouldnt advise ANYONE with an original TMOBILE device, ANY attempt to flash ANY firmware from the official builds just yet. Tmobile embedded a VERY WELL HIDDEN check into the EFS partition that only appeared in builds after 11_A.14 ... This check forcefully activates a lock triggered by the CarrierDevicePolicy.xml in the efs system... and if the Region and model does not match the original build that it came with, all of your apps will be completely disabled and there is nothing accessible but the settings button. It also disables ADB/USB debugging completely, and deauthorizes your computer from the adb wireless keys too... then it removes the USB DEBUGGING toggle from settings, followed by a persistent message that your phone is "Violating Contract Policy... Please contact after sales for support" ... Tmobile cannot remove this warning... and even them sending an UNLOCK request to your phone for APPROVED will get ignored by your phone. You can hear ringing, but cannot accept calls... hear emails but not open them,.. and you dialer is in emergency calls only!...
At this point you will think panic is the only option, but instead just Pull your sim card, and use your buttons to force reboot and enter recovery .... Then do a Format Data ,,,, followed by a reboot, but do not put your sim back in... Until you go thru the whole setup wizard, enable usb debugging, and then flash a rollback package to a fw earlier than the one i listed above, your phone will INSTANTLY lock again any time you insert ANY sim card.
Im very sure that there is a system process that can be disabled which will at least block the lockout.... but i dont have that knowledge as to which process(es) are calling it! A logcat generated about 15 screens on my computer as soon as i plugged a sim in... so that was too much for me to sift thru. This is present on both the 10 Pro and 10 T so be warned.... If you are already not using your original T-MO firmware, but you also have been loading other regions with no problem, that does not matter.... I have found an exact reference to the ORIGINAL FW build and Model # that was loaded by TMO at the factory level, in several different TXT and XML files inside the EFS part. AND my 10T and 10 Pro BOTH have been fully bricked, then formatted and flashed thru an authorized MSM Account.... Doing an ERASE ENTIRE FILE SYSTEM, thru msm, did not get rid of this file, so i doubt a twrp level wipe will do it either... MAYBE an "unlock Critical" in Fastboot, followed by a "Fastboot wipe", "DM-verity disable", and "VB-Meta erasure" MIGHT take out this crazy security system, but i know this .... if you flash an original FW using TWRP, it has protections in it to keep IT (twrp) from being overwritten, so you might find yourself in bootloop territory if you region hop.... cuz the fw might notice the changes to the partitions... For now, until someone is brave enough to challenge the Android 12 kernel and remove these trapdoors, I would just be happy you have TWRP, and wait for the person who finds and slays the Tmobile Dragon hidden in our phones! But this is truly an android 12 function that was put in place for Carrier and Manufacturer benefit ONLY. Another strike against 1+

beatbreakee said:
i wouldnt advise ANYONE with an original TMOBILE device, ANY attempt to flash ANY firmware from the official builds just yet. Tmobile embedded a VERY WELL HIDDEN check into the EFS partition that only appeared in builds after 11_A.14 ... This check forcefully activates a lock triggered by the CarrierDevicePolicy.xml in the efs system... and if the Region and model does not match the original build that it came with, all of your apps will be completely disabled and there is nothing accessible but the settings button. It also disables ADB/USB debugging completely, and deauthorizes your computer from the adb wireless keys too... then it removes the USB DEBUGGING toggle from settings, followed by a persistent message that your phone is "Violating Contract Policy... Please contact after sales for support" ... Tmobile cannot remove this warning... and even them sending an UNLOCK request to your phone for APPROVED will get ignored by your phone. You can hear ringing, but cannot accept calls... hear emails but not open them,.. and you dialer is in emergency calls only!...
At this point you will think panic is the only option, but instead just Pull your sim card, and use your buttons to force reboot and enter recovery .... Then do a Format Data ,,,, followed by a reboot, but do not put your sim back in... Until you go thru the whole setup wizard, enable usb debugging, and then flash a rollback package to a fw earlier than the one i listed above, your phone will INSTANTLY lock again any time you insert ANY sim card.
Im very sure that there is a system process that can be disabled which will at least block the lockout.... but i dont have that knowledge as to which process(es) are calling it! A logcat generated about 15 screens on my computer as soon as i plugged a sim in... so that was too much for me to sift thru. This is present on both the 10 Pro and 10 T so be warned.... If you are already not using your original T-MO firmware, but you also have been loading other regions with no problem, that does not matter.... I have found an exact reference to the ORIGINAL FW build and Model # that was loaded by TMO at the factory level, in several different TXT and XML files inside the EFS part. So this is truly an android 12 function that was put in place for Carrier benefit ONLY. Another strike against 1+
Click to expand...
Click to collapse
Absolutely despicable and such an anti-consumer technique.
This stands against everything OnePlus was. It's sad to see OnePlus turn into such an anti-developer phone
A Carrier should never have this much power over a device. It is absurd

heres a google drive link to my account if anyone wants to see a video of what you will go thru if triggered!
feel free to share or re-upload the link/video to anywhere... ppl need to know this is happening thanks to Tmobile and Oneplus collaboration. I have not seen any reference to another carrier inside any of the device policy files, and my phone was restored to a NON TMO branded build of android 12 for the 2217 NA model, so it should NOT have even recognized the TMO policies cuz i even used a new sim card after the MSM Unbrick, and it still instantly locked in less than a second of plugging it in... heres the vid
https://drive.google.com/file/d/17H6YpGrUCe1Y7PoFji4gperdpTHNX5AI/view?usp=sharing

also everyone should know, that EVERY fw on the internet no matter whether it is labeled, 2213, or 2215... 2217, as well as 2413-2419 ALL have EVERY other model's manifest built in and all of the restrictions / bloatware that each region comes with, saved into the OFP extracted files.... so there really is nothing that expressly was bricking your phones by simply flashing a different labeled FW..... the brick came from the manifest reading the region identifiers that the manifests are labeled under.... it is a file that is again picked by some random hidden check inside the TMO EFS, and as soon as your phone tries to boot the newly flashed FW, the TMO Lock is what bricks your phone, to either a bootloop state, or if you continue to force a flash by using Fastboot , you will have a non responsive phone, thanks to this stupid security issue. If unresponsive, the only way out is MSM Tool... and i can help you locate your test points if your buttons dont work.
I cannot publicly post a picture nor a description of where the test points lie inside the 10T , because i already got a cease and desist letter from BBK and i dont know if they have said anything to the mods here about posting Undisclosed hardware access points.... but ive been a member here almost 10 years, and i aint risking a ban from a tattle tale company! There are test points on the 10 t though,.. just well hidden!
The 2nd pic is of the 2217 Unpacked OFP , yet the build prop shows a 2210-2211 base in one and a 2413-2415 base in the.... with NO 2217 in either prop,or manifest file, yet when my phone was flashed back from Brick status, THIS is the FW that was used, and my phone identifies as a 2217 NA now..... can oneplus be any more clear that they have completely turned against us, by straight SHOWING US that they are being super cryptic and sneaky in something as common as the BUILD.PROP files?!?

The weird thing happened to me. I was doing "fastboot boot twrp.img" and adb gave me an error "Too many links" and the device only shows a OP logo for a half second, then turned off and then again repetatively.
Even if I turned off the device by holding power button + volume up + volume down, then turned on, same behavior happened.
Well, my fastboot was accessible so I did "fastboot boot boot.img" which worked and system booted up. But what happened, what might been wrong?

kouzelnik3 said:
The weird thing happened to me. I was doing "fastboot boot twrp.img" and adb gave me an error "Too many links" and the device only shows a OP logo for a half second, then turned off and then again repetatively.
Even if I turned off the device by holding power button + volume up + volume down, then turned on, same behavior happened.
Well, my fastboot was accessible so I did "fastboot boot boot.img" which worked and system booted up. But what happened, what might been wrong?
Click to expand...
Click to collapse
It could been...cause you might of had to many things open containing the same file...plus you might want to try the command ( fastboot flash recovery_a )....then ( fastboot flash recovery_b )

Canuck Knarf said:
It could been...cause you might of had to many things open containing the same file...plus you might want to try the command ( fastboot flash recovery_a )....then ( fastboot flash recovery_b )
Click to expand...
Click to collapse
Oh. I had opened like two or three folders containing that file, yes. But this can cause it? Wow. And I wanted to try to boot it first instead of flashing it.

kouzelnik3 said:
Oh. I had opened like two or three folders containing that file, yes. But this can cause it? Wow. And I wanted to try to boot it first instead of flashing it.
Click to expand...
Click to collapse
Yeah i hear you but I'm not sure if this a bootable version or a just install version....I will try it on mine to see if i get the same as you

Don't use command "fastboot boot twrp.img"....your phone will keep rebooting to op logo...but fastboot still works

Canuck Knarf said:
Don't use command "fastboot boot twrp.img"....your phone will keep rebooting to op logo...but fastboot still works
Click to expand...
Click to collapse
Yeah, I realised that, this happened to me. Thanks to fastboot I was able to boot into stock boot image, so nothign really happened, but hey. So if I dont want to flash it but only try it, what willl be the command? Fastboot boot recovery twrp.img?

kouzelnik3 said:
Yeah, I realised that, this happened to me. Thanks to fastboot I was able to boot into stock boot image, so nothign really happened, but hey. So if I dont want to flash it but only try it, what willl be the command? Fastboot boot recovery twrp.img?
Click to expand...
Click to collapse
It appears the image is not bootable. As stated, this is the one thing I didn't try.
I have amended the guide. Thank you