Ford 6000cd replacement unit is not working correctly! Doesn't turn on and off with key! Randomly powers off! And illumination not working nor screen dim! Maybe canbus not working! Please help me
You probably should be posting in the Android Head Unit forum. First of did you get a CANbus box with your HU? If so are the orange and red wires connected to it? Otherwise go to the factory menu and check/try other CANbus settings.
Hi thanks for the reply yes it did come with a can bus all leads were supplied for ford plug and play replacement
!!1!!1!!!.
Biff, is that really you? !!11!!1!
You can check if the CANbus box is talking to your HU by typing LOGCAN from the factory settings menu instead of the password if all you get is a black screen then the CANbus decoder is either disabled in the CANbus menu or set to the wrong type or the wiring is wrong. I remember seeing something about 2 wires being connected backwards but I can't find it. This post has a pinout diagram that might match your HU.
Related
Sorry to bother this forum whith even more questions about my car kit and TomTom GPS
I am trying to conect my TomTom GPS Mouse to my O2 CarKit.
I have found the pin configuration from another post on this site for the O2 Carkit connector.
RTS - Purple
DCD - Red
DTR - Blue
CTS - Yellow
RXD - Green
TXD - Orange
GND - Black
+5.5 V - Brown
(I hope this is correct)
But what the pin configuration for the TomTom GPS Receivers RJ11 connector is - I have no idea.
Please help anybody who knows which pins connect with which.
Thanks...
Yeah this one took me a while too....
Ok this is how to do it:
This is how to install a Leadtek GPS-mouse on the original O2 Carkit.
(The mouse shipped with Tom Tom Navigator is a Leadtek)
First of all you only need the cable with the RJ11 plug and the gps mouse on it. The 12V adapterplug you don't need anymore.
Preparation:
On the Carkit is a weird looking black connector for the gps.
Cut that off...
Now connect a connection block(I don't know the english word for it, but i mean the white blocks with screws in them so you can connect wires with other wires) to the following wires:
Brown
Black
Orange
Green
Now you can start:
Now you can choose to connect the mouse directly of you can make a removable connection. When I installed my carkit I used a fixed connection, but when I helped a friend out installing his carkit I used a standard phone connection box. You need a box where you can plug in a RJ11 connector. This is a better option because jou can easely unplug the gps mouse en use it again with the 12V adapter. This may come in handy if you want to be able to navigate in an other car too (Rental car on vacation).
I will explain how to make a fixed connection, so mounting a box in between will be fairly easy.
1) Cut off the RJ11 plug from the mouse
2) Strip the wires
*********
Note: The color codes of Leadtek mouse change all the time!
*********
In my case it where the following colors:
[Red](VCC +5)
[Wit] (RX)
[Black] (TX)
[No isolation] (Aarde)
3) Connect [Red] with (Brown)
4) Connect [White] met (Green)
5) Connect [Black] met (Orange)
6) Connect [No isolation] met (Black)
This should work!
PS
It may be wise to mount a switch between the radio-mute cable, because it mutes when you start TomTom.
You might want to listen to music when driving and navigating long distances.
do you know the pin numbers on the rj11 connector incase my wires are different colours...
No but you can see the wire witch no isolation as Pin 4
You're welcom, by the way....
Thanks for your help - my sat nav is now working through the xda car kit.
I was a bit nervous when i pluged it in for the first time - but nothing blew up and it is now all working - i would recomend this setup to anybody.
It took me a few minutes to juggle all the volume settings around untill i found a combination that had phone calls and sat nav voice prompts all at the same level but once that was done everything is fine.
maxlw said:
No but you can see the wire witch no isolation as Pin 4
Click to expand...
Click to collapse
Can you help me please????
when i connect the adaptercable from my gps system the xda stells me that the com1 port can't be found.
The tomtom software works, but the gps mouse is not recognised.
What can i do??
Thxs in advance,
rene from holland
Im sorry - i cant help - when i connected it all up it just worked first time - i had no error messages so have no experience in sorting them out...
check here http://www.pdashop.nl/support/1732/79 for a pin diagram for the rj11 connector for the leadtek gps mouse and check your wiring is the only thing i can suggest.
The connections should be as follows...
A1 to Black
A2 to Orange
A3 to Green
A4 to Brown
Hope this helps...
roycruse said:
Im sorry - i cant help - when i connected it all up it just worked first time - i had no error messages so have no experience in sorting them out...
check here http://www.pdashop.nl/support/1732/79 for a pin diagram for the rj11 connector for the leadtek gps mouse and check your wiring is the only thing i can suggest.
Click to expand...
Click to collapse
I just heard from another member. The solution is simple: if i turn out the irda port it should be ok.
I'm gonna trye first thing tomorrow.
thxs,
rene
I am having a problem with the xda not charging properly in ther O2 cradle whilst the GPS mouse is connected - its almost as if the GPS mouse is using most of the available current.
Im thinking of adding a resistor in series with the +Ve feed to the GPS mouse to limit the current it can take hoping this will leave more for charging the xda.
Does anybody else have any experience with this... what value resistor should I use...
Im thinking of adding a resistor in series with the +Ve feed to the GPS mouse to limit the current it can take hoping this will leave more for charging the xda.
Click to expand...
Click to collapse
Don't do that!!!!
It should work fine without...
Can you help me please????
when i connect the adaptercable from my gps system the xda stells me that the com1 port can't be found.
The tomtom software works, but the gps mouse is not recognised.
What can i do??
Click to expand...
Click to collapse
IF COM1 can't be found you have installed it correctly!
Hook everything up like before and then disable beam connection in [settings],[connections],[Beam]
This is a known problem with navigating on a pda!
After that you will see that it works.
Just don't don't add anything yourself you'll probably mess up your hardware!!!
Here are the instructions in Dutch....
http://forum.pocketpc-club.nl/showthread.php?s=&threadid=12421&goto=nextoldest
Hi All
Thanks for creating such a great site - its become a total lifeline for me with my XDA.
I need some help on setting up my sat nav. I have Tom Tom 5 put on a 1gig SD card, and I'm using a fortuna GPS U2 receiver which has a USB connector one end, a connector to the PDA in the middle and a PS2 connector to the GPS antenna on the other end.
Been trying to configure it in Tom Tom, I know I need to set the baud rate to 4800 as per fortuna's website, but does anyone know what I should tell the system the GPS is connected to? I have a number of options:
Com9
Serial Cable on Com 1
Serial on USB
Infared Port
Serial cable on Com 2.
I've sat out in the car an played around but can't get it to pick up a signal and I'm ondering whether its me setting it up wrong that isn't helping.
Please...can anyone help me?
Simon
try this
on your phone go into settings then connections then beam and untick beam then in tomtom go into change preferences then show gps status then into configure select other gps receiver then select com1 try this if you search wallaby forum there is lots of post on this
jay
try this
on your phone go into settings then connections then beam and untick beam then in tomtom go into change preferences then show gps status then into configure select other gps receiver then select com1 try this if you search wallaby forum there is lots of post on this some of these cables don't work i got one off ebay said it would work but never had to change the wiring look at thishttp://wiki.xda-developers.com/index.php?pagename=Connectors
jay
Thanks Jay - after lots of swearing and soldering I have now reassigned the pins and so far all seems well. The only thing I'm not getting at the moment is audio out of the speaker - however I do get audio when the headset is connected. Does anyone have any ideas?
audio
turn the audio on in tomtom its in the settings
hello! im new to this forum, and this is my first thread so sorry if i happen to be posting this in the wrong place, but ive been looking all over trying to find a remedy to my problem so now im turning to the forums for help.
i have a newly acquired 2010 chevy malibu LTZ, with a freshly installed pioneer SPH-DA120 APPRADIO 4 double din headunit. it loooks amazing, and it works great with an exception of a HUGE headache. i have a google nexus 6, and ive been told multiple times this phone is compatible with android auto, and i have even seen videos of it working, but i cant get i to work at all on my head unit. now mind you my headunit is compatible with car play, mirrorlink, and appradio and theres videos of it running android auto. my problem lies when i plug the phone into the unit, the only message i get is an error on the unit reading "incompatible usb". the device ans the headunit are at the latest firmware, and as added measure, i reset the device, and tried applying the parking brake, and enabling USB debuggind, all with the same end result. im at my wits end trying to figure this out, someone help please!
Mikeno11 said:
hello! im new to this forum, and this is my first thread so sorry if i happen to be posting this in the wrong place, but ive been looking all over trying to find a remedy to my problem so now im turning to the forums for help.
i have a newly acquired 2010 chevy malibu LTZ, with a freshly installed pioneer SPH-DA120 APPRADIO 4 double din headunit. it loooks amazing, and it works great with an exception of a HUGE headache. i have a google nexus 6, and ive been told multiple times this phone is compatible with android auto, and i have even seen videos of it working, but i cant get i to work at all on my head unit. now mind you my headunit is compatible with car play, mirrorlink, and appradio and theres videos of it running android auto. my problem lies when i plug the phone into the unit, the only message i get is an error on the unit reading "incompatible usb". the device ans the headunit are at the latest firmware, and as added measure, i reset the device, and tried applying the parking brake, and enabling USB debuggind, all with the same end result. im at my wits end trying to figure this out, someone help please!
Click to expand...
Click to collapse
The head unit isn't compatible with Android Auto. The Pioneer Avh-4100NEX runs Android Auto out of the box.
Sorry to bear bad news, but that model does not support "Android Auto": http://www.pioneerelectronics.com/PUSA/Car/AppRadio/AppRadio+4+(SPH-DA120)
It supports CP, "AppRadio" mode and Mirrorlink.
I think it's unlikely to be upgraded.
Well in that case does anybody know where I can get a cheap HDMI to micro USB splitter for app radio mode then..
Mikeno11 said:
Well in that case does anybody know where I can get a cheap HDMI to micro USB splitter for app radio mode then..
Click to expand...
Click to collapse
I can't answer that.
But if you are going with AppRadio, you may want to look into AppRadio Unchained or Reloaded; it seems a lot of people prefer it to AppRadio.
I have old OBD2 v1.5 adapter. Chinese, big one. Which pairs with HU and works well.
I wish to buy new one, that call 'mini'. I know I have to look for v1.5 (as 2.1 is a crap) and with PIC18F25K80 chip.
But I read that even much of these new mini are PIC based, that have some strange Mac address like AA:BB:CC:11:22:33.
Anyone has experience with such adapters? Do they pair and work with Torque on our HUs?
If anyone is using such an 'mini' adapter, please post link to eBay/AliExpress where you purchased it. Will be very grateful (and it may help other people here, too, as many have issues pairing/using crap adapters).
I personally bought https://www.ebay.com/itm/Auto-16-Pi...le-Diagnostic-Adapter-For-elm327/152700822059 and https://www.ebay.com/itm/2017-ELM32...uto-Car-Scanner-Scan-Tool-Cable-/112070132071 so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
PekeMM said:
I personally bought https://www.ebay.com/itm/Auto-16-Pi...le-Diagnostic-Adapter-For-elm327/152700822059 and https://www.ebay.com/itm/2017-ELM32...uto-Car-Scanner-Scan-Tool-Cable-/112070132071 so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
Click to expand...
Click to collapse
Thank you for sharing. I was not considering USB option, but it sounds interesting.
I see you both the 'big' one (same as my old one). And they really work very good.
But I would like to buy some of 'mini' models as my OBD2 port is in such place (under steering wheel and just above brake pedal) that big one is too big and my feet is hitting it while driving. Here is obe model I consider
Hardware V1.5 Chip PIC18F25K80 ELM327 Bluetooth V1.5 Auto Code Reader Super MINI ELM 327 Works ON Android Symbian FW V1.5 BEST
http://s.aliexpress.com/I3i26fy2
There are 2 models of these (not colours): old design with 2 PCB boards, and new one with just 1 board. I wonder if anyone has any of these?
pa.ko said:
But I would like to buy some of 'mini' models as my OBD2 port is in such place (under steering wheel and just above brake pedal) that big one is too big and my feet is hitting it while driving.
Click to expand...
Click to collapse
:silly: I do not see the problem there as if you checked both links from my post you would see that I use extension cable that do not have issue with connector position. Mine is located right above gas pedal so I could not drive car normally with any OBD Adapter unless I used extension cable.
pa.ko said:
Here is obe model I consider Hardware V1.5 Chip PIC18F25K80 ELM327 Bluetooth V1.5 Auto Code Reader Super MINI ELM 327 Works ON Android Symbian FW V1.5 BEST
http://s.aliexpress.com/I3i26fy2
Click to expand...
Click to collapse
PIC is programmed micro controller and not actual ELM327 see https://www.elmelectronics.com/products/ics/obd/ and v1.5 nor v2.1 exist officially as they are clones and you should use https://play.google.com/store/apps/details?id=com.applagapp.elm327identifier to test actual model and support.
Re which one: I ordered 6 different models and kept two that worked flawlessly with my car 1 was broken (got refund) and resold other 3 to get my money back.
PekeMM said:
I personally bought so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
Click to expand...
Click to collapse
How did you mod this?
gazenbeek said:
How did you mod this?
Click to expand...
Click to collapse
It is fairly simple MOD:
1. Soldered positive wire of lighter connector that have power only when Ignition is turned on.
2. Bought FLAT cable that I can easily cut the wires like in picture s-l1600.jpg
3. Cut Wire on pin 16 BAT power see ODBII%20Master%20Pinout.jpg
4. Connected wire that goes to OBDII to Positive wire I prepared in step 1
5. Connected OBDII to connector from FLAT CABLE
6. Connected USB to HU SINGLE USB CABLE
7. Tested if all works with Toque
8. Used cable ties to secure all cabling behind dashboard
and now I enjoy the all the diags on HU
PekeMM said:
so I connected it over USB and only thing I've made is HW MOD to get ACC+ instead BAT+ from OBD2 so that it is powered only when Key is turned on.
Resolved pairing issue with no pairing and all works along with BT and WiFi free for other devices.
Click to expand...
Click to collapse
Thanks for this info, very helpful, just got Android 8 Eonon 2170, and I've been struggling to pair OBD, Kiwi 3 doesn't show (BLE not supported? Don't know), Tomtom unit won't pair, no name unit seems to work, but, I've thought, why not USB, started searching for USB Android supported, luckily came across your post.
To change BATT to ACC, is that just so it's ' done properly'?
Surely battery drain would be miniscule, or not? I guess makes sense to have it not powered all the time.
Going by your posts, so, some of these units didn't work properly,ECU side or Android side? Thanks again, A
I just looked into factory settings, there is a CANBUS section, currently set to NONE, should that that altered to car maker's CANBUS ?
abbots said:
Thanks for this info, very helpful, just got Android 8 Eonon 2170, and I've been struggling to pair OBD, Kiwi 3 doesn't show (BLE not supported? Don't know), Tomtom unit won't pair, no name unit seems to work, but, I've thought, why not USB, started searching for USB Android supported, luckily came across your post.
Click to expand...
Click to collapse
Glad I helped someone
abbots said:
To change BATT to ACC, is that just so it's ' done properly'?
Click to expand...
Click to collapse
Yes, it is safe no issues at all
abbots said:
Surely battery drain would be miniscule, or not? I guess makes sense to have it not powered all the time.
Click to expand...
Click to collapse
It is not the problem that it drains a ot but all small drains can pile up so eventually you have a problem. I have park mode security enabled on my dashcam system so it drains some, OBDII can drain a littl, but it is known that in some cases keeps ECU awake that can drain a lot due teh number of sensors it keeps awake also
abbots said:
Going by your posts, so, some of these units didn't work properly,ECU side or Android side? Thanks again, A
Click to expand...
Click to collapse
All was ECU side due the different pinouts see my pics, I have seen in the past several USB -> COM chips that are not supported on Android due the OEM build and specific drivers like some factory that are not recognized on laptop till you install their licensed software (Usually JUNGO Based Drivers).
---------- Post added at 00:24 ---------- Previous post was at 00:20 ----------
abbots said:
I just looked into factory settings, there is a CANBUS section, currently set to NONE, should that that altered to car maker's CANBUS ?
Click to expand...
Click to collapse
Only if you got specific cables with canbus decoder (black little box). even then USB OBDII is used to diagnostic and clear codes. I use Toque 1.83 and it works on one unit that v1.52 didn't worked with. Usually ELM v1.5 works better than v2.1
thanks! I have now got USB OBD unit 1.5 (still need splitter/extender), tried yesterday with Torque as well as with Palmer's DashCommand:
it kinda worked - during first trip, 45min, Torque app crashed twice or more, worked after restart, on return trip, DashCommand also choked once or twice, thenm I relaized, as fuel tank level is not reported, unless I run app 100% of the time, fuel consumption won't be correct - and, realsiticall, I need TomTom on the screen more than gauges....
I see there are OBD spliters that 'allow' two or three OBD devices plugged in, wouldn't you know, is it OK to split/use multiple OBDs ?
like, I have TomTom 'Curfer' OBD data logger - just logs 'quality of driving", thoiught to get splitter to log data, AND, if so desire, call gauges on screen ?
thanks for explaing CANBUS!
do you use TPMS tyre pressure units, if so, which ones ? my radio has an app to read such, wonder if it's worth it ?
I have connected my USB OBD. Torque not recognised device. How to check that Scanner is properly installed on android system?
OBD scanner is generic just like this:
https://www.amazon.co.uk/ELM327-USB-Interface-Diagnostic-Scanner/dp/B00IWLLX1Y
BTW I have MTCE with android 8.0 with KLD MCU.
Torque lite ain't work with android/usb, only in bluetooth mode.
I have torque pro so there is no problem there.
Any way problem solved. Bought Bluetooth version.
Hi everyone and sorry if my first post has been covered before, but I couldn't find a post that exactly replicated mine.
I have a Kenwood Head unit, model number DMX8020DABS which is Android Auto compatible. My phone is a Samsung A20e running Android 10.
I cannot for the life of me connect my phone to the head unit either by usb cable or wirelessly.
I have had a friends phone iphone connected to the carplay on the unit and also a Samsung Galaxy S10 also, both connected wirelessly as soon as the bluetooth connection was made. This leads me to think my phone is not compatible. I have read about various compatible phones connecting wirelessly and can't see mine in a list anywhere, but I have also read any Android phone with Android 10 should be able to connect via usb cable.
I obviously have the Android Auto app built in to the Android 10 software, one question is do I need to download the Android Auto for phone screens app also?
When I plug my phone into the usb connection to the head unit the phone acknowledges it and the Android Auto app comes up and says follow instructions on car screen, but when you press Android Auto on the kenwood unit the wheel just keeps spinning and it says 'processing' and nothing happens. I have tried resetting the unit, uninstalling/re-installing the AA app, restarting the phone, everything.
Am I missing some settings, not set properly? One thing I noticed in the phone, when you connect the phone and pull down the drop down menu on the phone if you tap on the usb connection settings a screen comes up usb controlled by connected device or this phone, it is set to this phone, and one of the options is Transferring files / Android Auto with a button next to it, when I try to activate that button it won't check it just goes off, even though this is preset in the settings>developer options>networking>default usb configuration where the button is checked.
I have been trying for days to get this to connect. As an aside, my bluetooth connection is fine the unit can make calls and play spotify from my phone, it's just Android Auto that's not working.
Do I need a to get a new phone? Any ideas or advice would be welcomed. Thanks for reading.