Hi all,
as some already noticed, the official public Beta of EMUI 10/MagicUI 3 for the Magic 2 was released. Here is how to upgrade to it.
Please note:
There are several known issues in the beta, as listed below (translated from chinese):
The screen sometimes freezes when viewing recent tasks
After the upgrade, there is a problem that the traffic switch is turned on in the mobile phone, and when the notification bar has no notification, the flow bar of the pull-down notification bar disappears, and subsequent versions will be repaired.
After the upgrade, there is a problem entering the multi-task view. Will be fixed in further version.
After the upgrade, the gesture navigation left and right side slide vibration function is not acitve. You can keep the vibration function of sliding up into multitasking. If you want it, please go to “Settings > Sound and Vibration” More Sound Settings > System vibration feedback or vibration when clicked " and turn on the switch.
After the upgrade, the Rural Credit Bank APP will not be able to log in. Please be sure to unbind the device before the upgrade. The operation method (for reference only, subject to actual operation): Personal Center > Security Center > Device Management > Unbind, then upgrade, and then log in again after the upgrade is complete.
After the upgrade, there is a problem that the play store icon downloaded before the upgrade disappears. Please download the Google Play Store with a higher version than the current Google Play Service Updater or Google Play Store in the third-party app market (f.e. APKMirror).
Some applications are not adapted to dark mode.
GUIDE HOW TO UPGRADE
Prerequisites:
Before upgrading the beta version, please backup the important data of your mobile phone and confirm that the backup content is complete and valid. Avoid data incompatibility after upgrade or other unexpected conditions that result in data loss.
Make sure your OS number is one of the following (To check go to Settings > About Phone):
TNY-AL00 9.1.0.254(C00E222R2P1)
TNY-AL00 9.1.0.254(C00E222R1P1)
TNY-AL00 9.1.0.255(C00E223R2P1)
TNY-TL00 9.1.0.256(C01E222R2P1)
TNY-TL00 9.1.0.256(C01E222R1P1)
If not, update to newer version before
Make sure that you have more than 6G internal storage space, otherwise there will be a risk of upgrade failure (To check go to Settings > Storage).
Make sure your phone is not rooted.
Steps to update:
Open your Huawei Club App
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check if you are logged in (if not see down below)
Go to Forum > All Sections
Filter for EMUI and choose the first Entry with the "Test" sign
Open the top thread (only logged in user can open the thread)
Scroll down and click on the blue button the register for the beta program
Accept the two licenses by clicking on the right (blue) button after the time is up
Click on the blue button. With this you download a Beta Profile. It will be automatically installed on your phone. Now you get Beta OTA Updates.
Go to Settings > System > System update > Search for Updates
There should be the Update for EMUI 10. Please read the note as there are some important information in it (If you don't see the update wait 5-10 minutes).
If you can't log into the Huawei Club App do the following steps:
Go to Settings > Huawei ID and sign out
Create new Huawei ID with Region set to "Mainland China"
Sign in with your email and verify over your phone number (must not be chinese number).
Open the Huawei Club App, you should now be logged in automatically (if not delete cache and data and try again)
After the update is installed you should be on Android 10 with EMUI 10/MagicUI 3. Install a new Play Store apk (link above). Maybe some apps are not upgraded yet and don't function as before.
Thanks!!!!!
I have one problem, my version it's TNY-AL00 9.1.0.222 (C00E222R1P1) I try search one update but no find version 9.1.0.254 similar you speak in your post.
You think it's a problem I try install the beta version? You have suggestions for find update 9.1.0.254?
---------- Post added at 03:09 PM ---------- Previous post was at 03:07 PM ----------
jack5d said:
I have one problem, my version it's TNY-AL00 9.1.0.222 (C00E222R1P1) I try search one update but no find version 9.1.0.254 similar you speak in your post.
You think it's a problem I try install the beta version? You have suggestions for find update 9.1.0.254?
Click to expand...
Click to collapse
ok I find only now, and now try download the beta
jack5d said:
I have one problem, my version it's TNY-AL00 9.1.0.222 (C00E222R1P1) I try search one update but no find version 9.1.0.254 similar you speak in your post.
You think it's a problem I try install the beta version? You have suggestions for find update 9.1.0.254?
---------- Post added at 03:09 PM ---------- Previous post was at 03:07 PM ----------
ok I find only now, and now try download the beta
Click to expand...
Click to collapse
Okay perfect, how did you find your version? I don't remember, as I was on 254 since some time.
Really now have a big problem for registered Huawei China ID, I try change in China region, but continue no function...
jack5d said:
Really now have a big problem for registered Huawei China ID, I try change in China region, but continue no function...
Click to expand...
Click to collapse
I don't really know what you mean.
But you can create a complete new Huawei ID with the China Region. Just sign out and click on register.
Emare212 said:
I don't really know what you mean.
But you can create a complete new Huawei ID with the China Region. Just sign out and click on register.
Click to expand...
Click to collapse
Ok, in the end I can register new account Huawei China, now find beta version and start download, thanks !
Worked perfectly and i m on Android 10 beta now. Thx for your guide!
Thank you so much for the guide, was looking exactly for that.
Does anyone know how to get Google Assistant to work properly?
Hello
How to create a new account Huawei china ?
I create one on the internet site with china region but when I connect to this new account, the account is not recognized as china account.
Could you please help me ?
thanks in advance for your support
nico21311 said:
Hello
How to create a new account Huawei china ?
I create one on the internet site with china region but when I connect to this new account, the account is not recognized as china account.
Could you please help me ?
thanks in advance for your support
Click to expand...
Click to collapse
Check very good you register to China region (NO HONG KONG)
Check you change region in the phone and in a moment register new ID (because the region return default)
Check very good you exit from your ID Huawei, and create new from the phone
You have a problem creation new ID China from the phone, uses a VPN app for connect to server China
nico21311 said:
Hello
How to create a new account Huawei china ?
I create one on the internet site with china region but when I connect to this new account, the account is not recognized as china account.
Could you please help me ?
thanks in advance for your support
Click to expand...
Click to collapse
Just log out on the phone under Settings > Huawei ID > Sign Out
Then go again to Settings > Huawei ID > Register
Just follow the process and choose the region. After you validated through your phone number and email address you are automatically logged in in your HUAWEI club app.
Thank you very much for your answer, I restart at the beginning and all worked find now. A bit disappointed, due to th no possibility to use nova launcher. I REALLY FRUSTRATED by that and ready to change to vivo nex 3. Hopping I will do not have the same issue.
Related
Hello everyone,
I was searching through one of the chinese forums and came across this rom. I have this rom installed on my Note at the moment and I am really surprised how lee has modified it and having full support for touchwiz themes and high level of customisation. Have a look at screenshots in the second post. I am sure you all will like it and enjoy the highest level of customisation on your note.
ORIGINAL THREAD ::: Rom Thread
PLEASE NOTE :: IF YOU WANT TO MAKE DONATIONS PLEASE MAKE IT TO LIDROID NOT TO ME AS I AM ONLY POSTING THE ROM FILE HERE ON XDA.
Rom Features :::
Based on official 2.3.6 firmware ZSKK1.
Default ODIN package lidroid kernel n7000 1.0, integrated CWM recovery 5.0.2.6 (volume up and down keys to adjust the direction, HOME, MENU, POWER to select the function, BACK to return to the previous menu), as shown: http://bbs.lidroid.com/t-80166-1-1.html
CIFS module, available to download and install CIFSManager from Market to mount window shares.
Includes Root, Root Explorer Lite and Superuser.
Supports Two-way call recording, Incoming Call Recorder, Outgoing Calls Recorder, Noise Reduction Mod and No Increasing Ringtone Mods . (Settings -> Call Settings -> Extended settings).
Contacts Search in Phone Dialer.
System Tools V3.4, the new UI style, support batch backup and recovery, batch install and uninstall programs disabled, flip mute, auto-start housekeeping, automatic flight, the personal information backup, installed necessary, power-saving mode , screen shots, bar code scanning and other functions.
Percentage Battery Mod.
Google Maps updated to v6.0
SIP CallS [ VOIP calls can be made via adding credentials in Settings )
Included Super Mount (external SD card as APP<->DATA contents of the directory / sdcard directory, so you no longer play games to worry about navigation. Details, see gallio tutorial posts: http://bbs.lidroid.com/t-54769-1-1.html.
Call Vibration Intensity Settings (Settings -> Call Settings -> Call Alerts -> Outgoing Calls -> Sound -> tactile feedback)
Advanced Power Menu
CRT Screen MOD.
Customisable 15 Notification Switches http://bbs.lidroid.com/t-64175-1-1.html.
Enhanced SMS App, text messaging time is shown as delivery time, add more than 10 recipients , provides two ways to read MMS, SMS backup and recovery is no longer available, the system will be built this kit feature. (Personal Information Backup System Toolbox)
SMS Logs not shown in Call Logs by default.
NEW IOS style settings UI.
Six Unlock Screen Mods (slide to unlock, unlock rotation, rotation unlock 2, the drop-down box to unlock ring lock screen, Samsung unlock),
Gesture Support http://bbs.lidroid.com/t-36307-1-3.html.
Advanced Settings tool to customise apps to your preference , you can set the window animation speed, animation speed, and switching the font size, font size changes effective after reboot.
You can immediately switch the UI style, style, or IOS-style native to you liking.
Theme Support (Through Theme Manager online preview download theme, download can be installed after the switch to a different theme, please refer to: http://bbs.lidroid.com/t-73929-1-1.html)
Note: Because of the galaxy note's resolution of 1280x800, the current theme is not perfectly compatible with I9220/N7000, only the program icons, pull-down switch icon and battery icon to the right are compatible, you may wish to try, more and more compatible themes will be added from time to time.
DOWNLOAD LINK : http://www.multiupload.com/SE7USVDW94
:::::: INSTRUCTIONS ON HOW TO FLASH THE ROM ::::::
1. Download LiDroidRomTools_Release.apk from the below attachment.
2. Run It on any previous or current rom you are using.
3. Chhose the options you want.
4. Download the Rom file lidroid-n7000-1.0.2.zip and rename it to update.zip and place it into the root of your sdcard.
5. Run CWM recovery and select install update.zip from sdcard.
6. Select restart the device and thats it. Happy flashing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LINK : Multiupload ( Uploading )
::::::: BUGS & FiXES :::::::
On First Boot, the Language and Locale is to Chinese, you can change it to English by going to Settings.
To change locale to your preference download the Set Locale and Language App from Market
Market Link ::: https://market.android.com/details?id=com.bruce.setlocale
Downloading and respond later.
Thks for sharing
Sent from my GT-N7000 using XDA App
Downloading....
Sent from my GT-N7000 using Tapatalk
Can't Find Download Link
It looks amazing but not able to download as the page is in Chinese.
Even after translating with google, cannot find the download link.
Anyone, please help....
shaiq123 said:
It looks amazing but not able to download as the page is in Chinese.
Even after translating with google, cannot find the download link.
Anyone, please help....
Click to expand...
Click to collapse
same here
thanks for posting this ROM
mm79k said:
same here
thanks for posting this ROM
Click to expand...
Click to collapse
In the second post it says the poster is uploading the rom for you. You can't down load from the Chinese page unless you register and set up an account.
Thank you !!!!
Can you add a link for download please?
My Chinese are in the same level with your Greeks
shaiq123 said:
It looks amazing but not able to download as the page is in Chinese.
Even after translating with google, cannot find the download link.
Anyone, please help....
Click to expand...
Click to collapse
the link behind "ZIP刷机包下载:" is the download link like multiupload,
but it needs an account due to large size,
perhaps need to wait for someone (or me 21hours left ) to finish download and re-seed
Thanks.. Yes, I got it now. I had to register and than was able to find the download link.
But the server is slow for me. Says will take around 4 hours to dowload..
---------- Post added at 08:48 PM ---------- Previous post was at 08:43 PM ----------
Well, the fourth download link is the fastest for me. DOWNLOAD CHINA UNICOM. It is downloading at an avg speed of around 140 kbps. Says will take one hour.
Lets see
Not link...........
download alr... its like miui but not like miui.. and its a Wipe rom..
managed to download the ROM without setting up the account.
I like the ROM but it has no market app!
Just to check, those who have downloaded is the file name lidroid-n7000-1.0.2.zip? Is this flashable through CWM?
dereknas said:
Just to check, those who have downloaded is the file name lidroid-n7000-1.0.2.zip? Is this flashable through CWM?
Click to expand...
Click to collapse
Yes.........
what does the 'ios style ui' mean? will the settings and menu be like it is in a miui ROM?
If that's the case, awesome!
edit: found a screenshot in the sgs2 section, looks like a cheap version of the ios menu style.... meh
tids2k said:
::::::: BUGS & FiXES :::::::
On First Boot, the Language and Locale is to Chinese, you can change it to English by going to Settings.
Click to expand...
Click to collapse
Can we change it to italian?
thankx Danilo
Inviato dal mio GT-N7000 usando Tapatalk
is the home button working... mine is not ..
Can someone help with this? I've tried every which way to Sunday to try and register and download. No luck yet.
Sent from my GT-N7000 using xda premium
Hi Guys, I have been using this ROM for about a week now and I felt that it is stable and zippy for my daily use and hence would like to recommend it to you guys.
Please note that this is NOT MY WORK. All credits should go to the creator Cason From XDA.CN
--- Hong Kong version of the latest 2.3.6ROM N7000ZSKK1 based on extensive optimization
--- Combined ODEX, optimize all APK
--- Baseband N7000XXKJ6
--- Adding the latest complete permanent ROOT
--- Integrate the latest version of busybox
--- Optimized script for CWM
--- Updated with the latest version of the Samsung APPS
--- Updated with the latest version of the market 3.3.12
--- Updated with the latest version of Gmail 2.3.5.2
--- Updated with the latest version of Google Maps 6.0
--- Updated with the latest version of Flash Player to 11.11
--- Original kernel, boot without an exclamation point triangle
--- Fixed GPS data toggle switch button conflict
--- Fixed contacts, text messages and other restrictions, remove the desktop icon text shadows
--- Fixed call hold function
--- Modify the official weather widget to translucent version (see the clear transparent characters)
--- Modified battery meter to white pointer full-motion (accurate percentile 1)
--- Optimized GPS files, positioning faster and more accurate
--- Modify the official font for the quasi-circular font Cason Queen
--- Extract the latest version of the Chinese input method
--- I joined the RE modified the latest version of Samsung icon manager special edition
--- Adding the latest Samsung dedicated navigation software (XX perfect use)
--- Adding a key to cleaning up ad
--- Added MIUI compass (compass is best to use numerous)
--- Added the latest version of Vlingo voice
--- Added call recording
--- Added a quick restart
--- Removed some official wallpaper
--- Added "my private beach 3D" dynamic wallpaper for I9220
--- Default ringtone is Samsung1, the default SMS tone is Samsung2, add iphone alarm bell for the Samsung3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions:
1 Download the Galaxy Note Rom by Cason.zip copied to the phone built-in SD card root directory
2 phone off hold the volume + HOME + POWER on the phone to enter CWMRecovery mode
3 Choose: install zip from sdcard to confirm
4 Select: choose zip from sdcard to confirm
5 found: Galaxy Note Rom by Cason.zip confirm
6 Select yes Galaxy Note Rom by Cason.zip confirm this step may be time will be longer, please be patient
7 Wait for completion of the main menu, press the Return key to return
8 Select the reboot system now restart
Download link
http://115.com/file/cl0xn89h#
http://www.multiupload.com/JIOL0MGFPB
*Please note that as this ROM is based in China, you might need to modify the GPS.conf files to your region for better GPS performance.
* I have attached the latest modem file from KL1. I find that it works very well with the ROM. Please extract and flash it with ODIN.
Thanks
language only chinese and england
Call record is default on KK1
Good work
faby71 said:
language only chinese and england
Call record is default on KK1
Good work
Click to expand...
Click to collapse
Yes, I think the ROM is only English and Chinese. It's not my WORK. I just translated it from another forum.
Any Battery tweak on this rom?
Can anyone could help me out?
I really need some help!!!
As I brought a Samsung note from china, and ask my friend bring it to me.
But I need to make it like the one brought in HK.
As thr current china version could not works good as HK version.
I just could notr run the files that I download
I place those file into the phone's memory.
Help~~~~
---------- Post added at 10:20 AM ---------- Previous post was at 10:19 AM ----------
As I* just could not:
- phone off hold the volume + HOME + POWER on the phone to enter
HELP please~~~
Leechoonhwee said:
Yes, I think the ROM is only English and Chinese. It's not my WORK. I just translated it from another forum.
Click to expand...
Click to collapse
please add Turkish language
Mui9 said:
Can anyone could help me out?
I really need some help!!!
As I brought a Samsung note from china, and ask my friend bring it to me.
But I need to make it like the one brought in HK.
As thr current china version could not works good as HK version.
I just could notr run the files that I download
I place those file into the phone's memory.
Help~~~~
---------- Post added at 10:20 AM ---------- Previous post was at 10:19 AM ----------
As I* just could not:
- phone off hold the volume + HOME + POWER on the phone to enter
HELP please~~~
Click to expand...
Click to collapse
You need to have CWM installed first.
http://forum.xda-developers.com/showthread.php?t=1331784
Thanks ah~
As I just don't know what to do and how to do it~~~
Would you mind to tell me what to do step by steps?
It's too hard for me..................
---------- Post added at 01:13 PM ---------- Previous post was at 12:22 PM ----------
Leechoonhwee , please help~~~~
please help
Mui9 said:
please help
Click to expand...
Click to collapse
He has already posted the XDA link :
http://forum.xda-developers.com/show....php?t=1331784
it is very simple to install recovery. just follow the instructions
ah, the link doesn't work.
I really need some simple instruction for the way to install the HK rom in.
But U just couldn't do it
Please~~~~~~
Give me spome instruction on how to do the work
welcome to the club new chef, hope to see more quality roms from you.
Mui9 said:
ah, the link doesn't work.
I really need some simple instruction for the way to install the HK rom in.
But U just couldn't do it
Please~~~~~~
Give me spome instruction on how to do the work
Click to expand...
Click to collapse
The instructions from the link on the 7th post on the first page, already link you to the most comprehensive step by step instruction for novice, and that link is active. Spend some time reading instead of just repeat asking for help. Help is already given.
Mui9 said:
ah, the link doesn't work.
I really need some simple instruction for the way to install the HK rom in.
But U just couldn't do it
Please~~~~~~
Give me spome instruction on how to do the work
Click to expand...
Click to collapse
the xda link is the simplest step by step instruction already. did you bother to read it in the first place
http://forum.xda-developers.com/showthread.php?t=1331784
Help
no, I had follow everything, just could not do the change.
I think need to do the cwm
but I just don't know how to do it.....
help..........
Mui9 said:
no, I had follow everything, just could not do the change.
I think need to do the cwm
but I just don't know how to do it.....
help..........
Click to expand...
Click to collapse
The link I have posted above shows you how to have CWM installed. It is already a step by step. Where which step you were stuck ? Make sure you download the right file to match your kernel
Download link up.
Google Search is not signed. As a result, can't upgrade google search from Market.
ipd98 said:
Google Search is not signed. As a result, can't upgrade google search from Market.
Click to expand...
Click to collapse
You need to remove it using titanium and then download it from the market again.
Sent from my GT-N7000 using xda premium
Hi, nice to see more options for Note users. I'm interested in getting the Samsung Dedicated navigation software and tried to search the samsung app store for it to no avail. Is it alright to request someone who is using this rom to extract the apk and upload it for all to enjoy? Thanks in advance!
Hi, I'm BigboyPL. Maybe some people already know me.
Firstly I don't have LGP880, just GT540 and old KP500.
Probably you are wondering what I'm doing here.
I will answer : I'm helping ppl with LG. Especially with firmwares, flashing and service manuals.
It started in 2009. I've bought brand new KP500 in February. After few months I started modifying a firmware etc.
I was very interested in csmg servers. I looked for a lot of things and after few days I knew almost everything that I've need.
In 2009 it was very easy to crack B2B (just need to change password window to main window ;d) and also pages was very simply.
Also links for firmwares was little different. FW was in .cab extension. It was needed only one page to get list of all .kdz firmwares.
You can look here how it was looked: http://web.archive.org/web/20090508...g/b2c/client/b2c_version_mode.jsp?model=KP500 easy as pie ;d
Then in 3rd quater of 2009 LG has changed many things. Firmwares was in .kdz and were signed to IMEI number, and it's for today. B2C_version_mode page dissappeared.
There was a new pages used in B2B:
ezlooks_to_csmg_noti.jsp - it was used for inform about new .kdz firmwares
global_manual_noti.jsp - it was uded for inform about new drivers, service manuals etc.
You can see it here:
http://web.archive.org/web/20100611...com:9002/csmg/popup/ezlooks_to_csmg_noti.jsp?
http://web.archive.org/web/20101124...le.com:9002/csmg/popup/global_manual_noti.jsp
as you can see it's a bit harder cause you must substitute data to link. To get complete suffix you must use :
http://web.archive.org/web/20100923...mode_country_check.jsp?model=GT540&country=GB
previously you can download service manual from here: csmg.lgmobile.com:9002/csmg/b2c/client/sw_manual_list.jsp?model=KP500&suffix=ADEUSV
now you can just download user manual, pc suite, and drivers only.
Then in 2011 pages was changed to other. ezlooks_to_csmg_noti is now agent_phonesw_notice_list
I make copy of agent_phonesw_notice_list every day. I've backup since 2011, and ezlooks since 2010. I can download any .kdz file which can download B2C at normal update.
In 2012 I found out that LG has beta RNDTESTSW firmwares too.
Since then I'm trying to understand how to get this firmware but vainly.
In 2013 LG has changed authentication in B2B and B2B is logging to LG site too. LG has changed WEBSW to WDLSW parameter updated csmg server and
added parallel header site (csmg.lgmobile.com:9002 is running same as csmgdl.lgmobile.com)
I also found B2B cracked by ooxtcoo on his ftp site. I have 1.4.8.0 and 1.4.9.0 versions.
Many peoples has it too.
I wanted to patch a new version and I found that daniel.wro patched traffic and gained access to the tool. He told me that he used tool called fiddler.
I spent one day to find how that works.
Then I started to look for RNDTESTSW in many programs. First tool that I patched was B2E but I didn't found anything interesting.
Next, at general forum reas0n said that a man called foil uploaded beta version fw for LGE960. I found his profile on xda but he wasn't online for about 2 months.
I found his twitter (f0il) and then our conversation begin.
He told me that I must use PCSyncFTP tool from LG. He added that I will find something in traffic.
For about a month, I struggled with this tool and finally I had to give up cause I found nothing.
I wanted him to say something more but he gives me nothing.
Please, don't spam any messages at his profile cause he won't tell you anything. He is reverse engineer and that't his job. It is obvious that if someone earns money for it why would he tell you for free. Respect it.
I took a different way.
I was looking for "something" in the other tools.
I've edited B2C tool and now I have Retail&Vendor tool.
in B2C you can see 2 links:
First link giving us some RNDTESTSW link
http://csmg.lgmobile.com:9002/csmg/...websw_list.jsp?country=®ion=&buyer=&model=
e.g. http://csmg.lgmobile.com:9002/csmg/...list.jsp?country=DE®ion=E&buyer=DEU&model= (without model it shows all models)
but I think it giving always outdated links cause
<model>LGE975</model>
<suffix></suffix>
<buyer>DEU</buyer>
<buyer_name>GERMANY</buyer_name>
<swversion>E97510C_00</swversion>
<live_date>2013-03-18 16:28:16.0</live_date>
<region>E</region>
<country>DE</country>
<country_name>Germany</country_name>
<chip_type>QCT</chip_type>
<sw_recommand_uri>GLOBAL/EIC</sw_recommand_uri>
<sw_uri>http://csmg.lgmobile.com:9002/swdata/RNDTESTSW/LGE975/DEU/07IHFWIZXG/E97510C_00/E97510C_00.kdz</sw_uri>
Click to expand...
Click to collapse
you can see that is uploaded today in 16:28 korean time (GMT+8)
and link is not working.
the second link is
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check_optestimei.jsp?esn=
if somebody has developer phone after esn= you should type IMEI and it should give something.
And now it's time to reflection. I have many IMEI's from prototype phones (IMEI starts at 0044) and it's not a developer phone.
I think it's used to test hardware, I mean prototype to test does phone works good. Also gsm providers can get this prototype to see how will looks their "additions".
Also companies that are making reviews (e.g. gsmarena) doesn't have developer phones.
I once read somewhere in LG Service Information bulletins that there are phones with yellow imei labels. Such mobiles aren't repaired but send somewhere in LG.
Maybe this is the clue.
here is edited version of B2C: http://www.mediafire.com/?hme6xi15io74jdy
you should put this file in LGMOBILEAX/B2C_Client (in xp C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\B2C_Client)
In Extras tab you have some extra options and tool will work till next update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[that's not end, I will write more here so refrain from unnecessary comments such : "why do we need it", "wrong forum", "littering" etc.]
[reserved]
it will be many codes and images so I must reserve post
[reserved]
reserved for fiddler tutorial, files
reserved for special thanks
Thanks for writing this thread and supporting us ..
Best regards,
i look forward to any additional help you may provide, thankyou
couldnt the RNDTESTSW somehow be part of UpTestEX_mod2_marwin which is the RNDTESTTOOL maybe there would be some way of unlocking extra tabs inside it, i know that it already has 2 options that say they are not implemented yet please wait for next release
Nobody knows how to activate new version of UpTestEX.
http://csmgdl.lgmobile.com/swdata/client/inhouse/UpTestEX_1.1.5.2.cab
Buttons are always not active.
yeah i told about that version today but we do have the version before 1.1.5 that is already cracked/working. .
heres a few url''s for other stuff that someone told me about but you probably already have them and i dont know if there off any use to you
ttp://csmgdl.lgmobile.com/swdata/client/inhouse/B2BFileUpdateAgent_1.0.5.0.cab
ttp://csmgdl.lgmobile.com/swdata/client/inhouse/BuyerShopAppProg_2.0.1.6_2.0.1.6.cab
ttp://csmgdl.lgmobile.com/swdata/client/inhouse/BYREUTProg_1.0.8.0.cab
ttp://csmgdl.lgmobile.com/swdata/client/inhouse/NotiAgent_BYR_1.0.8.8.cab
ttp://csmgdl.lgmobile.com/swdata/client/inhouse/UpTestEX_1.1.5.2
ttp://csmgdl.lgmobile.com/swdata/client/inhouse/B2BAppProg_1.5.0.1.cab
ttp://csmgdl.lgmobile.com/swdata/client/inhouse/B2CAppProg_1.6.3.0.cab
(place the h at the beguinning of url)
also wouldnt it be possible to use hex editor to see how the previous was bypassed or with fiddler
Where is patched 1.1.5.2 version of UpTestEx ?
BigBoyPL said:
Where is patched 1.1.5.2 version of UpTestEx ?
Click to expand...
Click to collapse
if you have original and patched uptestex, would it not be easy with IDA pro to look at assembly code and change the same code in updated edition??
BigBoyPL said:
Where is patched 1.1.5.2 version of UpTestEx ?
Click to expand...
Click to collapse
i said we have the previous version patched (actually a little older than previous its ver1.0.4)but at a guess the method of authenticating would of probably only changed slightly if at all or even better would be to check how b2b does it
I think those rndtest goodies can be obtained from B2E support->upgrade event but it requires security key that it sends to server so without right authentication server won't send any info
I also tried buyershop but it needs password not at its openning and it didn't check the server for authenticating so it might be built in password
Buyershop is operator support tool (I have buyer test app and it's working without passwords), it only has one option : update phone.
Previous versions of UpTestEX can be cracked using just ResHacker or other tools like this. You must change not premited menu to premited menu and add parameters WS_VISIBLE to all buttons, windows etc. and delete WS_DISABLED.
Sorry that I don't finished this theard but I'm very busy now. In next few days I will try to write some text.
BigBoyPL said:
Sorry that I don't finished this theard but I'm very busy now. In next few days I will try to write some text.
Click to expand...
Click to collapse
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check_optestimei.jsp?esn=x
do u know the right response to this - it looks like see if u've operator test mobile b4 doing the ordinary check and it might give some permission
i tried to respond with the same ordinary response but it didn't enable me to download 20a - maybe its related to this rnd temp link
another interesting check which i don't know its response http://csmg.lgmobile.com:9002/csmg/b2c/client/os_upgrade_check_rnd.jsp?esn=x
ofcourse normal respone is fail on both (we need operator esn)
It must give status=OK and some .kdz RND link I think.
BigBoy,
It would be wise to keep your findings to yourself, and stop talking about it in an open forum. I understand that you're wanting to help everybody out, but you will kill the access that you have if everybody and their mother can do it. I have full admin access that I can create/delete real working accounts, and bind mac/ip to account, so I'm personally not worried about it - but for the sake of the community, please don't put this stuff out into the open. Respect what you have, and don't abuse it.
I'm not trying to be an asshole at all, I'm just looking out for everybody.
Btw, not all R&D is hosted on public internet, and is only on LG private intranet. You need remote pin access
Hello
i have some questions about the site for root my phone i don't know why i can't select the Root authorized device.
Can you help me i have a meizu pro 7 M792H flyme 7.1.0.0G.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you so much
Dimitri
dimitri_12240 said:
Hello
i have some questions about the site for root my phone i don't know why i can't select the Root authorized device.
Can you help me i have a meizu pro 7 M792H flyme 7.1.0.0G.
Thank you so much
Dimitri
Click to expand...
Click to collapse
this way of obtaining root doesnt work with global phone (firmware 7.1.0.0g). you need to have chinese phone with firmware 7.1.0.0a to get root with mroot site Global firmware 7.1.0.0g cant get root yet
if you want to put chinese firmware 7.1.0.0a to your global device and get root check this link
https://forum.xda-developers.com/pro-7/how-to/meizu-pro-7-firmware-chinese-to-g-t3690752/page14
i see you are a new member the guide is difficult for beginners and i suggest you dont try it
you can go back to 7.0.0g and get root easier.
kutulu32 said:
this way of obtaining root doesnt work with global phone (firmware 7.1.0.0g). you need to have chinese phone with firmware 7.1.0.0a to get root with mroot site Global firmware 7.1.0.0g cant get root yet
if you want to put chinese firmware 7.1.0.0a to your global device and get root check this link
https://forum.xda-developers.com/pro-7/how-to/meizu-pro-7-firmware-chinese-to-g-t3690752/page14
i see you are a new member the guide is difficult for beginners and i suggest you dont try it
you can go back to 7.0.0g and get root easier.
Click to expand...
Click to collapse
Do you know if root obtained in China ROM 7.1.0.0 A is enabled for a specific Flyme account? If it does, would be possible to enable root in 7.1.0.0 G for the same account after it obtained root in A ROM for the same account? Does Meizu server remembers that it gave root rights for that account and would enable root further, no matter what ROM (G orA) that account logs in?
I tried only latest Beta ROM but in this firmware it isn't possible to use mroot method because Beta ROM uses the same old root prior to 7.1.0.0 G and I didn't bother to install latest A stable.
cris2d2 said:
Do you know if root obtained in China ROM 7.1.0.0 A is enabled for a specific Flyme account? If it does, would be possible to enable root in 7.1.0.0 G for the same account after it obtained root in A ROM for the same account? Does Meizu server remembers that it gave root rights for that account and would enable root further, no matter what ROM (G orA) that account logs in?
I tried only latest Beta ROM but in this firmware it isn't possible to use mroot method because Beta ROM uses the same old root prior to 7.1.0.0 G and I didn't bother to install latest A stable.
Click to expand...
Click to collapse
I followed the guide and installed 7.1.0.0A and i automatically had root i didnt had to follow the mroot procedure.
Now that i check the mroot site my phone is in the list together with my other meizu phone mx4pro.
So there is a possibility for root to work even with 7.1.0.0 G
But i havent tested it. If i have time ill try it
kutulu32 said:
Root in 7.1.0.0 G cant be enabled even if you previously used it with china firmware(a) and the mroot procedure.
Click to expand...
Click to collapse
That's too bad. I gave up Beta ROM and settled on 6.1.3.2G, it's more battery friendly than 7.0.0.0G.
One more question, maybe you know the anwser: did you managed to replace stock root with SU and install SuperSU and Xposed framework in 6.1.3.2G?
cris2d2 said:
That's too bad. I gave up Beta ROM and settled on 6.1.3.2G, it's more battery friendly than 7.0.0.0G.
One more question, maybe you know the anwser: did you managed to replace stock root with SU and install SuperSU and Xposed framework in 6.1.3.2G?
Click to expand...
Click to collapse
Read my answer again i edited it . I tried the mroot site again and my phone is shown in the list. Maybe it works even in G firmware but it needs testing. Supersu doesnt work it causes bootloop. If you remember from the guide it also told us to no reboot after superSu installation and use
kutulu32 said:
Read my answer again i edited it . I tried the mroot site again and my phone is shown in the list. Maybe it works even in G firmware but it needs testing.
Click to expand...
Click to collapse
Well, this is interesting, I'll test it myself as soon as I'll repair my windows computer.
Do you have some words about the other issue from my previous comment, about SuperSU and Xposed?
EDIT: my phone also appears on mroot website, but I can't apply for rooting because I'm on an older ROM that doesn't support mroot app and I can't find PSN and CHIPID elsewhere And I didn't noted these numbers nowhere...
cris2d2 said:
Well, this is interesting, I'll test it myself as soon as I'll repair my windows computer.
Do you have some words about the other issue from my previous comment, about SuperSU and Xposed?
Click to expand...
Click to collapse
I havent managed to make superSu to work either with 6 or 7 flyme with meizu pro 7. It causes bootloop after reboot.. superSu works with my other phone mx4pro that has flyme 6.2 firmware but based on android 5.about xposed i didnt try it in my pro 7 .
kutulu32 said:
I followed the guide and installed 7.1.0.0A and i automatically had root i didnt had to follow the mroot procedure.
Now that i check the mroot site my phone is in the list together with my other meizu phone mx4pro.
So there is a possibility for root to work even with 7.1.0.0 G
But i havent tested it. If i have time ill try it
Click to expand...
Click to collapse
After a short period on China stable and beta ROMs, I decided to come back to the latest Global ROM, 7.1.0.0G and I had a very big surprise: I obtained root!
So, after installing latest Global firmeware, a couple of days ago, I checked mroot.flyme.cn and reapplied for root authorization, mostly because my device appeared on that list of devices to chose from (a code and Meizu Pro 7 name, as in the screenshot). This was not the case before installing chinese ROMs, when only two weird alphanumeric strings were showing, with no particular name or phone model. Today, I checked the mroot app and the root button turned blue I pressed it and, after a few messages, it dissappeared and a short chinese text was shown on the app main page. I went to activate root like the tutorials suggest: in easy mode create a shortcut to root.OpenSystemRightActivity and activate the root function by entering Flyme account password. After the phone rebooted the root capability was enabled, every app I use that needs root works flawlesly.
So, I confirm: root can be obtained on the latest Flyme 7.1.0.0G for Meizu Pro 7 M792H.
cris2d2 said:
After a short period on China stable and beta ROMs, I decided to come back to the latest Global ROM, 7.1.0.0G and I had a very big surprise: I obtained root!
So, after installing latest Global firmeware, a couple of days ago, I checked mroot.flyme.cn and reapplied for root authorization, mostly because my device appeared on that list of devices to chose from (a code and Meizu Pro 7 name, as in the screenshot). This was not the case before installing chinese ROMs, when only two weird alphanumeric strings were showing, with no particular name or phone model. Today, I checked the mroot app and the root button turned blue I pressed it and, after a few messages, it dissappeared and a short chinese text was shown on the app main page. I went to activate root like the tutorials suggest: in easy mode create a shortcut to root.OpenSystemRightActivity and activate the root function by entering Flyme account password. After the phone rebooted the root capability was enabled, every app I use that needs root works flawlesly.
So, I confirm: root can be obtained on the latest Flyme 7.1.0.0G for Meizu Pro 7 M792H.
Click to expand...
Click to collapse
Thats good news!!! . I am still in 7.1.0.0A(chinese) but i ll try it when i go back to global rom.
How to install Xiaomi.eu ROM for Xiaomi 12 Pro
Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file BETA or STABLE
- If you are on Windows: Right click on downloaded zip - Settings - Unblock zip content
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Unpack downloaded zip file in the PC (WinRAR is recommended)
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via original USB cable
- Run fastboot installation script as administrator from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_first_install_with_data_format.bat
For Linux ./linux_fastboot_first_install_with_data_format.sh
For MacOS ./macos_fastboot_first_install_with_data_format.sh
- After reboot its done (first boot may take up to 15min)
Steps to install update of xiaomi.eu ROM (All your data and files on internal storage will NOT be deleted!)
- Download our ROM zip file WEEKLY or STABLE
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system
For Windows OS ./windows_fastboot_update_rom.bat
For Linux ./linux_fastboot_update_rom.sh
For MacOS ./macos_fastboot_update_rom.sh
Update guide on the video
- After reboot its done (first boot may take up to 10min)
Update via OTA:
Installation via OTA is currently not possible due to missing TWRP
Updater will notify you about new version and download it to your device for you
You have to copy it to your PC, unpack it and run fastboot_update_rom sctipt
Enjoy..
Many Thanks
Great Job
Will try it soon
after i do fastboot i canot access my xi 12 pro by file system i dont see it its just off
how to fix it ?
Thank you for this ROM
Two questions:
1. Will it be possible to install bank apps?
2. Does Android Auto work fine on xiaomi.eu? On my Global ROM I get the following
And also: I see Xiaomi 12 Pro in the stable thread but not in the weekly...
Android Auto works fine on our ROM..
ingbrzy said:
Android Auto works fine on our ROM..
Click to expand...
Click to collapse
yes I can confirm thx
I have a probable bug in the permanent search bar at the bottom: where should I report it?
in our bug section
Bugs
xiaomi.eu
Hello, I am new here
Would anywone know if Google Pay works in Global Version?
I am currently using Xiami 12 Pro (CN) version/rom and I cannot register my credit card.
ArchevarNavarro said:
Hello, I am new here
Would anywone know if Google Pay works in Global Version?
I am currently using Xiami 12 Pro (CN) version/rom and I cannot register my credit card.
Click to expand...
Click to collapse
Yes it works
ArchevarNavarro said:
Hello, I am new here
Would anywone know if Google Pay works in Global Version?
I am currently using Xiami 12 Pro (CN) version/rom and I cannot register my credit card.
Click to expand...
Click to collapse
you will brick your device if you lock bootloader with Global ROM on CN device..
ScoOby-Do0 said:
Yes it works
Click to expand...
Click to collapse
Ok sorry, let me repeat my question...
I was able to download an install Google Pay, and register my debit card in the app.
However, when I try to use the NFC (contactless payment), the reader does not "read" or "acknowledge" my phone.
I am actually considering to trade my CN version to a Global version. I am using Mi 12 Pro...
ingbrzy said:
you will brick your device if you lock bootloader with Global ROM on CN device..
Click to expand...
Click to collapse
Hello, I am actually afraid if I do that. So the easiest and safest solution I can think of is to trade my CN unit to a Global unit (once it becomes available).. But also I am considering if I can make use of the NFC payment method..
ArchevarNavarro said:
Hello, I am actually afraid if I do that. So the easiest and safest solution I can think of is to trade my CN unit to a Global unit (once it becomes available).. But also I am considering if I can make use of the NFC payment method..
Click to expand...
Click to collapse
best option for you with CN device is installing our ROM..
ingbrzy said:
best option for you with CN device is installing our ROM..
Click to expand...
Click to collapse
I am wishing xiaomi.eu weekly for Xiaomi pro 12. I hope we can test it soon!
Thanks a lot for your roms <3
ArchevarNavarro said:
Ok sorry, let me repeat my question...
I was able to download an install Google Pay, and register my debit card in the app.
However, when I try to use the NFC (contactless payment), the reader does not "read" or "acknowledge" my phone.
I am actually considering to trade my CN version to a Global version. I am using Mi 12 Pro...
Click to expand...
Click to collapse
You're going to love me... lol
I had the same issue, you need to go to "Connections & sharing" then "Default wallet" and change from Mi or Sim to HCE Wallet and then you'll be able to pay using Google Pay. Make sure under "Contactless payments" the default payment is set to Google Pay and "Always use default app". This means you won't need to open Google Pay, just tap the phone to the terminal while unlocked and it'll pay. Magic.
ScoOby-Do0 said:
You're going to love me... lol
I had the same issue, you need to go to "Connections & sharing" then "Default wallet" and change from Mi or Sim to HCE Wallet and then you'll be able to pay using Google Pay. Make sure under "Contactless payments" the default payment is set to Google Pay and "Always use default app". This means you won't need to open Google Pay, just tap the phone to the terminal while unlocked and it'll pay. Magic.
Click to expand...
Click to collapse
Hello there!
I will try to set this up and see if the terminal will be able to read my device.
However, my next struggle is on the Mi Pay app.
I also now have the Xiaomi Watch S1, and in-order to set-up the contactless payment on my watch, it needs to be configured using the Mi Pay app on my phone. But the Mi Pay app has limited (Chinese) banks only... I have attached some screenshots here. Any advise?
EDIT:
After further research, I learned that the Mi Pay for the Mi Watch S1 will only work on certain regions. So I guess I cannot use it in my country.
Thanks for all the help!
with this rom, did you get root? or its a separed process?
vago0 said:
with this rom, did you get root? or its a separed process?
Click to expand...
Click to collapse
our ROM is not rooted..