Related
Hello
EMUI 6 will be out soon, but my P9 + is still under EMUI 4.1.1
I have a VIE-L29C185B181 and I have not received any updates, (from HiCare or update)
I have tried manual updates (B360, B380, B381) but it does not work, and the B320 is no longer available on HiCloud.
Is it normal or my p9 + has problems?
thank you
if ur bootloader and oem update are both locked (i.e u are on stock unmodified android 6 and emui 4.1.1) use firmeware finder to upgrade to l29c185b360, then use it again after upgrade to upgrade to 380.
- my bootloader is unlocked, is this the problem ?
- If I do a backup of oeminfo, can I do a rollback to M from N with this backup ? I have tried this method with other device (Huawei G8) and it work.
I have reinstalled C185B181 for locking the bootloader,
then I tried to install C185B360 (method 3 buttons and method *#*#2846579#*#*) with locked bootloader and unlocked FPR but it's fail @ 37%
then I tried with locked bootloader and locked FPR, also fail @ 37%
finaly , I tried with unlocked Bootloader/FPR and also fail @ 37%
try using the firmware finder method with firmware finder proxy module. no need to download the firmware to ur phone before upgrade...just select the firmware u need to update to in firmeware finder and select update via proxy, then go to about phone and check for updates and then choose install full package. make sure u dont have an altered system to begin with and no root, no problem if both bootloader and fps are locked.
also dont forget to choose OTA/FULL package to update to.
thank you for replying
Just a question, is C185B360 an official update for C185B181?
yes it is.
---------- Post added at 03:50 AM ---------- Previous post was at 03:45 AM ----------
dont forget to remove dload folder if u have it in internal or SD card.
I tried with Firmware Finder 2 times but it's fail @ 2% (download 100%, installation 2%)
I have also tried to reinstall the C185B181 (current version of my P9+) with Firmware Finder but it's fail @ 2%
sorry I have no more suggestions, that method worked for me at least.
Is it necessary to upgrade to B320 before B360?
If yes, is there anyone who has a copy of C185B320 ? (this version has been deleted from HiCloud)
I do did it (sorry for my bad english)
C185B181 -> C185B360 -> C185B380
the bootloader most be unlocked
FullOTA-MF contains these files :-
update.zip
system
update_data_full_public.zip
data
update_full_LLD-L31A_hw_eu.zip
but what is this file?
when would this file be necessary to use?
to unbrick ur phone
---------- Post added at 10:50 PM ---------- Previous post was at 10:49 PM ----------
i also downloaded fullota-mf
i did not see 3 zip file.
from where have u downloaded this?
During unbrick, will it leave S/N and IMEI intact?
PS: I downloaded it from "Huawei Multi-Tool 8 \ Firmware Finder Rewrite 4"
i hope your phone is "LLD-L31" and your country is 432 !
if this - then you can do a "FULL-Update" for your phone.
but - what's the build in your phone (menu/system/over the phone/build) and what the build you downloaded ?
example: LLD-L31 8.0.0.xxx(C432) xxx=build-nr Cxxx=country
the info you give is not all info what we need to give you a good answer
you can not any install in your phone - you must the correctly install !!!
other you can brick your phone !
and a correctly factory-update DONT touch the S/N and IMEI
The firmware that came with my phone:
Build Number: LLD-L31 8.0.0.128 (C432)
I assume this translated to Firmware: LLD-L31C432B128
I assume this code, 432, equals Region: Europe
Firmware Finder does not have version 8.0.0.128 (I wanted to keep as a backup), so I am using version 8.0.0.131 (the latest one available)
Additional question:
If I flash UPDATE.ZIP under TWRP, will it restore Stock Recovery (and overwrite TWRP)?
Or, would I have to also flash RECOVERY_RAMDIS.IMG (extracted from UPDATE.APP)?
It appears you can't flash UPDATE.ZIP under TWRP, so never mind.
*** SOFT BRICK RISK! Some people reported having soft bricked their devices by installing Android 10 update package. Huawei eRecovery will not work then in case that Huawei in your region did not yet publish Android 10 packages. It will try to recover to Android 9 instead, which the device will reject to do ***
For updating firmware of BL (bootloader) locked Mate 20 Pro an experimental method is available using HiSuite to latest firmwares. Windows only, no Mac.
Purpose of this is to bring the device up-to-date even when OTA upgrade is not available at a given time for a given region/carrier.
*** CAUTION: may break SafetyNet check, i.e. disable Google Pay, if firmware higher than intended for a given region is flashed ***
Hope it helps you.
Note that if your BL is unlocked, this method will lock it. Unlocking it again is possible, however full-wipe will occur.
Usage: unzip HSTool, run as standard user and follow prompts. No need to run HSTool under elevated Windows privileges, just the "hosts" file editing needs privileged access to the filesystem.
Successfully tested SafetyNet check passing firmware list (no longer maintained):
(All variants) 9.0.0.206 (Changelog) Note: February 2019 Security patch, Camera 9.0.0.305
(All variants) 9.0.0.210 (Changelog) Note: March 2019 Security patch, Camera 9.0.0.305
Cust partition (region) will stay original based on device oeminfo. C432 wil stay C432 after upgrade and so forth. Also in case you previously used a different method which "soft rebranded" your device, e.g. from Europe C432 to Asia/Pacific C636, this method will fix it.
Test results (no longer maintained):
2019/03/01: Own test: 9.0.0.206 - ctsProfile pass C432 Vodafone EU, camera 9.0.0.305 (likely designed for Europe, assumed because of working GPay on C432)
2019/03/12: Own test: 9.0.0.211, 213 - ctsProfile mismatch C432 Vodafone EU, camera 9.0.0.305
2019/03/13: Own test: 9.0.0.222, 225 - ctsProfile mismatch C432 Vodafone EU, camera 9.0.0.305
2019/03/19: Own test: 9.0.0.178 - ctsProfile mismatch C432 Vodafone EU, camera 9.0.0.309 (likely a Huawei experiment/beta image)
2019/03/27: Reported by dajumper: 9.0.0.228 - ctsProfile not reported, camera 9.0.0.312 (likely designed for Japan, assumed because of Japanese changelog, incl. Japanese KDDI VoLTE support added)
2019/03/27: Own test + reported by KedrosNg: 9.0.0.232 - ctsProfile mismatch C432 Vodafone EU, camera 9.0.0.305
2019/04/04: Own test: 9.0.0.235, ctsProfile pass status unknown (tested on rooted device), camera 9.0.0.312
2019/04/06: Reported by Merewood bebox: 9.0.0.210 - ctsProfile pass C432, camera 9.0.0.305
I wanna have an downgrade, I'm at 183. Want to downgrade to 153. Dl USB otg doesn't work.
Verstuurd vanaf mijn LYA-L29 met Tapatalk
Let me try
one more doubt .. for me to be able to do this procedure I have to have the bootloader unlocked or not
douglasmietto said:
one more doubt .. for me to be able to do this procedure I have to have the bootloader unlocked or not
Click to expand...
Click to collapse
NO
Read the title of this thread: BL locked (bootloader locked)
No root needed.
No bootloader unlock needed.
Works with out of the box Mate 20 Pros.
Arni99 said:
NO
Read the title of this thread: BL locked (bootloader locked)
No root needed.
No bootloader unlock needed.
Works with out of the box Mate 20 Pros.
Click to expand...
Click to collapse
I can not download FH Hisuite patch funkyhuawei .. can someone please send me
one
douglasmietto said:
I can not download FH Hisuite patch funkyhuawei .. can someone please send me
one
Click to expand...
Click to collapse
https://funkyhuawei.club/tools
Download here "hisuite method" follow the instructions incluided
Enviado desde mi LYA-L29 mediante Tapatalk
douglasmietto said:
I can not download FH Hisuite patch funkyhuawei .. can someone please send me
one
Click to expand...
Click to collapse
PM sent.
Arni99 said:
PM sent.
Click to expand...
Click to collapse
Thanks
---------- Post added at 10:43 AM ---------- Previous post was at 10:20 AM ----------
douglasmietto said:
Thanks
Click to expand...
Click to collapse
I
---------- Post added at 10:46 AM ---------- Previous post was at 10:43 AM --------
---------- Post added at 10:50 AM ---------- Previous post was at 10:46 AM ----------
I want to know which firmware version I can download in the other topic .. my model is LYA-L09 I'm in version 183 cust 605 ..... and I want to know if it's possible after updating if I need to go back to version 183 using the usb folder dload?
Data loss or is data safe?
merewood bebox said:
Data loss or is data safe?
Click to expand...
Click to collapse
For me it was safe when upgrading from .187 to .206
Hola @mikeos
Many thanks for your work and sharing it with all of us.
I tried to use your tool but I get the message that Assistant aborted by user (code=1).
1. Windows 10 x64.
2. Antivirus software disabled.
3. Ran tool with elevated administrator privileges.
4. All 2 prerequisites are installed.
5. Relaunched the tool over 30 times.
6. Getting the same error on a Windows 7 workstation.
Is there anything you can suggest I do please?
QAM said:
Hola @mikeos
Many thanks for your work and sharing it with all of us.
I tried to use your tool but I get the message that Assistant aborted by user (code=1).
1. Windows 10 x64.
2. Antivirus software disabled.
3. Ran tool with elevated administrator privileges.
4. All 2 prerequisites are installed.
5. Relaunched the tool over 30 times.
6. Getting the same error on a Windows 7 workstation.
Is there anything you can suggest I do please?
Click to expand...
Click to collapse
Silly question: did you write "continue" in the first step?
mikeos said:
Silly question: did you write "continue" in the first step?
Click to expand...
Click to collapse
Hola @mikeos
Now you make me look like a total Noob. This is so embarrassing mate. :silly::silly::silly:
Thanks for the prompt response, again much appreciated. :highfive:
I want to know if after doing this procedure I will be able to go back to an earlier version using usb dload and if I will continue to receive updates via ota .. can anyone help me with this question please
thanks for this. good to see some more methods for installing firmware appearing. downloading .206 now and will give it a try once it is done!
douglasmietto said:
I want to know if after doing this procedure I will be able to go back to an earlier version using usb dload and if I will continue to receive updates via ota .. can anyone help me with this question please
Click to expand...
Click to collapse
In general downgrade is not recommended and may cause problems. Not because of the method. Because manufacturers don't want downgrades (see e.g. Apple, Huawei seems going similar direction).
As to OTA, I am very confident that one day you normally receive OTA with this method. But the question is rather when? Aren't you here just because you didn't receive it from manufacturer? If it was so great with factory OTAs, tools like this wouldn't need to exist.
mikeos said:
In general downgrade is not recommended and may cause problems. Not because of the method. Because manufacturers don't want downgrades (see e.g. Apple, Huawei seems going similar direction).
As to OTA, I am very confident that one day you normally receive OTA with this method. But the question is rather when? Aren't you here just because you didn't receive it from manufacturer? If it was so great with factory OTAs, tools like this wouldn't need to exist.
Click to expand...
Click to collapse
I wanted to know about ota because I did not find any more firmwares to use in this method in the future ...
douglasmietto said:
I wanted to know about ota because I did not find any more firmwares to use in this method in the future ...
Click to expand...
Click to collapse
Its entirely up to Huawei but if new firmwares don't get released in this format then it's highly unlikely they'll be available via OTA.
Grondah said:
Its entirely up to Huawei but if new firmwares don't get released in this format then it's highly unlikely they'll be available via OTA.
Click to expand...
Click to collapse
ok I understand .. and version 206 I can install on my LYA-L09 187 CUST605 without problems?
Hi guys
I have rebrand my eva-l09 by chinese oreo firmware, using HWOTA7, and after starting up, all google service are missing, abd cannot intall it correctly, i trying all GMSInSTALL apk but nothing happen.
I tried to unlock bootloader via fastboot, a message showing up on adb command (unlock frp necessary...), can't enable OEM UNLOCK, always stay on grey.
Nothing is fine for me on this chinese firmware
Model : EVA-L09
BUILD NUMBER : System 8.0.0.046(0cs6)
EMUI VERSION : 8.0.0
ANDROID VERSION : 8.0.0
ANY SOLUTION TO INSTALL C432B504?
rowland.phoen1x said:
Hi guys
I have rebrand my eva-l09 by chinese oreo firmware, using HWOTA7, and after starting up, all google service are missing, abd cannot intall it correctly, i trying all GMSInSTALL apk but nothing happen.
I tried to unlock bootloader via fastboot, a message showing up on adb command (unlock frp necessary...), can't enable OEM UNLOCK, always stay on grey.
Nothing is fine for me on this chinese firmware
Model : EVA-L09
BUILD NUMBER : System 8.0.0.046(0cs6)
EMUI VERSION : 8.0.0
ANDROID VERSION : 8.0.0
ANY SOLUTION TO INSTALL C432B504?
Click to expand...
Click to collapse
You say that you followed HWOTA7 instructions - did you really
1) Your screenshot shows model L09.
OP post #2 requores that you must rebrand (change location) from L09 (or L19, L29) to AL10.
You didn't rebrand, or it failed (how, why)?!
2) Your screenshot shows build number 8.0.0.046(OCS6).
Never seen any firmware like that.
HWOTA7, post #2, clearly describes that you must flash (after rebranding to AL10 c00), first b399sp17, and after b540.
Your build number is completely different?!
What you have is not result by following HWOTA7 instructions.
If you followed HWOTA7, you would have:
1) AL10 c00 b540 (not L09 b046 or what)
2) OEM/FRM would be permanently unlocked, with no OEM Loxk/Unlock option in Developers menu (not just grayed out)
3) You would have Playstore services preinstalled, you would just need to install Playstore apk
HWOTA7 OP post #3 describes how to rollback from (properly installed!!) AL10 c00 b540 Chinese Oreo back to Nougat (eg to L08 c432 b504)
But you don't have AL10 c00 b540, but instead something totally strange/wrong - I doubt that given eRecovery procedure will work for you.
You can try with HuRupdater (sorry, I never used and needed to use HuRupdater)
https://forum.xda-developers.com/ho...ash-official-firmware-recovery-t3769279/page1
Or, you can ask for a paid help from DC-Phoenix or Ministry of solutions:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
https://ministryofsolutions.com/paid-services
zgfg said:
You say that you followed HWOTA7 instructions - did you really
1) Your screenshot shows model L09.
OP post #2 requores that you must rebrand (change location) from L09 (or L19, L29) to AL10.
You didn't rebrand, or it failed (how, why)?!
2) Your screenshot shows build number 8.0.0.046(OCS6).
Never seen any firmware like that.
HWOTA7, post #2, clearly describes that you must flash (after rebranding to AL10 c00), first b399sp17, and after b540.
Your build number is completely different?!
What you have is not result by following HWOTA7 instructions.
If you followed HWOTA7, you would have:
1) AL10 c00 b540 (not L09 b046 or what)
2) OEM/FRM would be permanently unlocked, with no OEM Loxk/Unlock option in Developers menu (not just grayed out)
3) You would have Playstore services preinstalled, you would just need to install Playstore apk
HWOTA7 OP post #3 describes how to rollback from (properly installed!!) AL10 c00 b540 Chinese Oreo back to Nougat (eg to L08 c432 b504)
But you don't have AL10 c00 b540, but instead something totally strange/wrong - I doubt that given eRecovery procedure will work for you.
You can try with HuRupdater (sorry, I never used and needed to use HuRupdater)
https://forum.xda-developers.com/ho...ash-official-firmware-recovery-t3769279/page1
Or, you can ask for a paid help from DC-Phoenix or Ministry of solutions:
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
https://ministryofsolutions.com/paid-services
Click to expand...
Click to collapse
Im using HWOTA7, but i change update files by anothore one i have downloaded from web, i work for give you the link of firmware used.
Any solution for my big issue please SIR
rowland.phoen1x said:
Im using HWOTA7, but i change update files by anothore one i have downloaded from web, i work for give you the link of firmware used.
Any solution for my big issue please SIR
Click to expand...
Click to collapse
Sorry, really cannot help you then.
Unfortunately, since you didn't follow the guide but flashed some other firmware instead (you thought 'better' or what), you are in a specific situation, on your own, and only you should know or find how to deal with the phone and that Oreo firmware
As suggested in the previous answer, you may try with HuRupdater, but IMO, instead of further improvising (HuRupdater is very powerful but you can brick the phone), consider paying 15-20 Euros for DC-Phoenix or Ministry of solutions to safely downgrade to Nougat
After that, if you want Oreo, please follow the HWOTA7 guide carefully and in every detail (like others who now happily use the Oreo) - you will have stable Oreo AL10 c00 b540, debloated, fully working and with less battery consumption than Nougat
Also, rooted, passing SafetyNet, with fully working GApps, and ready for Open Kirin Treble custom ROMs (maybe they will work with your Oreo, too, but cannot tell you)
And if you would ever want to go back to Nougat, you would have a proven roll-back guide as in the OP post #3
zgfg said:
Sorry, really cannot help you then.
Unfortunately, since you didn't follow the guide but flashed some other firmware instead (you thought 'better' or what), you are in a specific situation, on your own, and only you should know or find how to deal with the phone and that Oreo firmware
As suggested in the previous answer, you may try with HuRupdater, but IMO, instead of further improvising (HuRupdater is very powerful but you can brick the phone), consider paying 15-20 Euros for DC-Phoenix or Ministry of solutions to safely downgrade to Nougat
After that, if you want Oreo, please follow the HWOTA7 guide carefully and in every detail (like others who now happily use the Oreo) - you will have stable Oreo AL10 c00 b540, debloated, fully working and with less battery consumption than Nougat
Also, rooted, passing SafetyNet, with fully working GApps, and ready for Open Kirin Treble custom ROMs (maybe they will work with your Oreo, too, but cannot tell you)
And if you would ever want to go back to Nougat, you would have a proven roll-back guide as in the OP post #3
Click to expand...
Click to collapse
Foud me a solution plz sir
rowland.phoen1x
Use HCU for FRP unlock
Unlock bootloader , flash twrp to erecovery and change oeminfo (better to EVA-DL)
Tnen flash via HuRupdater B540 chinese firmware
Thats do if you know how )
rambik33 said:
rowland.phoen1x
Use HCU for FRP unlock
Unlock bootloader , flash twrp to erecovery and change oeminfo (better to EVA-DL)
Tnen flash via HuRupdater B540 chinese firmware
Thats do if you know how )
Click to expand...
Click to collapse
any method without a Box ?
I have the same issue, this is how i fix it...
rowland.phoen1x said:
Hi guys
I have rebrand my eva-l09 by chinese oreo firmware, using HWOTA7, and after starting up, all google service are missing, abd cannot intall it correctly, i trying all GMSInSTALL apk but nothing happen.
I tried to unlock bootloader via fastboot, a message showing up on adb command (unlock frp necessary...), can't enable OEM UNLOCK, always stay on grey.
Nothing is fine for me on this chinese firmware
Model : EVA-L09
BUILD NUMBER : System 8.0.0.046(0cs6)
EMUI VERSION : 8.0.0
ANDROID VERSION : 8.0.0
ANY SOLUTION TO INSTALL C432B504?
Click to expand...
Click to collapse
Maybe I can help you...
I had the same issue just like you, even I read this post before I fix my phone.
First of all, the bootloader says the FRP-Locked, OEM Lock(or whatever says, i can't remember)-Unlocked.
On the Developer Settings the Oem Unlock option was greyed out.
Just like you.
So, reading this post [GUIDE] Debranding to C432 and updating to B361 (Nougat) for EVA-L09 i had a hunch...
What did I do to have my phone back?
1. My phone had the C432 oeminfo, so, I downloaded the dload-huawei-p9-eval09-eva-b136.zip (L09C432B136) in this post. Stock ROM dload file - P9 EVA-L09 B136
2. Copy the extracted dload folder to the external microSD card.
3. Now open the dialer app and enter *#*#2846579#*#* to open the project menu
4. Go to Software Upgrade > SDCard upgrade and confirm the update installation.
5. After the update, maybe shows an error at the final, let it be.
6. The phone restarts and boots with the L09C432B136, Android 6.0, and if you check the Developer options, the OEM unlock option is enabled. You can now lock or unlock your bootloader.
7. I need to update to the latest build and if i tried to check for an update, it says there is none.
8. I downloaded this firmware Download Huawei P9 B182 Marshmallow Update [Europe] I repeat steps 2-5, lock the bootloader, and search for an update... and update after update, I'm on L09C432B504 (Nougat)
Hope to help you...
Sorry for my bad english, I have no one to practice with...
Hi Everyone;
I dont know i am writing right place or not but i cant get answer to my question till 2 days in RR OS's own page... May be i choose old rom and its not favourite now but i want to change my phone's (Huawei P9 - EVA L09) stock rom with lighter Android 8 (Oreo) custom rom.
I got my phones oem unlock code via DC Unlocker than unlock my phone than i install TWRP's (Open Kirin in Edition) than i rooted my phone vith Super Su.
Everything was ok till that step but than, when i try to install Resurrection Remix's Oreo version for my phone, but i got error in installation.
I attached error photos to this message.
After unsusccess install process i cant open my phone and my phones Internal memory looked 0 mb, then, fortunately i can recover my phone with Huawei's own eRecovery.
I wanna know what did wrong than i will try to change my phones OS asap...
any_body said:
Hi Everyone;
I dont know i am writing right place or not but i cant get answer to my question till 2 days in RR OS's own page... May be i choose old rom and its not favourite now but i want to change my phone's (Huawei P9 - EVA L09) stock rom with lighter Android 8 (Oreo) custom rom.
I got my phones oem unlock code via DC Unlocker than unlock my phone than i install TWRP's (Open Kirin in Edition) than i rooted my phone vith Super Su.
Everything was ok till that step but than, when i try to install Resurrection Remix's Oreo version for my phone, but i got error in installation.
I attached error photos to this message.
After unsusccess install process i cant open my phone and my phones Internal memory looked 0 mb, then, fortunately i can recover my phone with Huawei's own eRecovery.
I wanna know what did wrong than i will try to change my phones OS asap...
Click to expand...
Click to collapse
There are Open Kirin Treble Oreo ROMs (RR, LOS) for Huawei/Honor phones:
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
Installation instructions require:
1) OK Oreo ROMs can only be installed over Huawei stock Oreo (not over stock Nougat)
2) OK ROM must be flashed by Fastboot, not from TWRP (btw, TWRP for Huawei Oreo is different than TWRP for Nougat because of different partitions names, sizes, etc)
There is also XDA thread about Open Kirin Treble ROMs (on P9):
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
and for (1), there is a thread describing how to rebrand P9 L09/L19 to AL10c00 and update to Oreo (b540):
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
zgfg said:
There are Open Kirin Treble Oreo ROMs (RR, LOS) for Huawei/Honor phones:
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
Installation instructions require:
1) OK Oreo ROMs can only be installed over Huawei stock Oreo (not over stock Nougat)
2) OK ROM must be flashed by Fastboot, not from TWRP (btw, TWRP for Huawei Oreo is different than TWRP for Nougat because of different partitions names, sizes, etc)
There is also XDA thread about Open Kirin Treble ROMs (on P9):
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
and for (1), there is a thread describing how to rebrand P9 L09/L19 to AL10c00 and update to Oreo (b540):
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
Click to expand...
Click to collapse
Everything looks ok but my phone is in Android 7.0 stock rom.
How can i upgrade it to Oreo vith custom rom?
On the other hand my FRP looks like unlocked?
Must it be locked to install OpenKirin?
any_body said:
Everything looks ok but my phone is in Android 7.0 stock rom.
How can i upgrade it to Oreo vith custom rom?
On the other hand my FRP looks like unlocked?
Must it be locked to install OpenKirin?
Click to expand...
Click to collapse
First, go back to stocl Nougat, and please read again my previous answer - I gave you link for HWOTA7 method for rebranding from stock L09/L19 to AL10 and then upgrading toAL10c00 b540 Oreo
If you don't like unlocked FRP, then go back to stock Nougat and re-lock Bootliader (and then lock FRP back).
But as long as you do rooting, installing custom ROMs, or rebranding to that AL10, you must have unlocked Bootloader and for unlocked Bootliader you must have also unlocked FRP
zgfg said:
First, go back to stocl Nougat, and please read again my previous answer - I gave you link for HWOTA7 method for rebranding from stock L09/L19 to AL10 and then upgrading toAL10c00 b540 Oreo
If you don't like unlocked FRP, then go back to stock Nougat and re-lock Bootliader (and then lock FRP back).
But as long as you do rooting, installing custom ROMs, or rebranding to that AL10, you must have unlocked Bootloader and for unlocked Bootliader you must have also unlocked FRP
Click to expand...
Click to collapse
Everything is OK but when I lock back my Bootloader and Recover my original Android 7.0 Android with Huawei's official eRecovery, my FRP still shown unlocked...
any_body said:
Everything is OK but when I lock back my Bootloader and Recover my original Android 7.0 Android with Huawei's official eRecovery, my FRP still shown unlocked...
Click to expand...
Click to collapse
(Re)installing/OTA updating some stock firmwares lock back both OEM/FRP and Bootloader, but it depends on the firmware itself (Huawei who prepare them).
If you already installed latest firmware for your cust by eRecovery, you can only try to do Factory reset from stock Recovery or eRecovery
Otherwise, rolling back to Marshmallow (and after that updating again to Nougat) shoulf fix the problem with disabled OEM unlock option (I had it twice but in the opposite way, OEM was locked but its option was disabled)
However, having unlocked FRP is not a big trouble. You can still open Bootloader and root/flash, etc - problem would be if OEM option was disabled but locked - then you could not unlock Bootloader and flash anything from Fastboot
With FRP=Factory Reset Protection unlocked you (only) have:
- 'annoying' note that phone is not secure while booting
- ability to start Factory reset from Recovery and eRecovery (with licked FRP, Factory reset is only allowed once you login to the System, from Settings or Project menu)
- ability to unlock Bootloader and flash things
So, what if i wanna install Android 7 custom rom? How can i do it? Can i do it with TWRP'S special Open Kirin Edition directly from Stock Rom?
Can i upgrade my phone to Android 8 after i install Android 7 custom rom first or i have to do it with Rebrand / Update Tool first?
Because rebrand / update tool (or SRK Tool i am not sure) look so complicated and i am afraid to make hardbricked my phone... (i backed up my phone with HiSuite but i am not sure can i recover my phone with it if i unbrick my phone?)
I am using EVA-L09C464B389 rom now.... On the other hand, i cant be sure which AL10 (Oreo) rom is right for me, because when i search in russian page you offered, there is more than one alternative...
I hope i can explain what i mean with my poor English...
any_body said:
So, what if i wanna install Android 7 custom rom? How can i do it? Can i do it with TWRP'S special Open Kirin Edition directly from Stock Rom?
Can i upgrade my phone to Android 8 after i install Android 7 custom rom first or i have to do it with Rebrand / Update Tool first?
Because rebrand / update tool (or SRK Tool i am not sure) look so complicated and i am afraid to make hardbricked my phone... (i backed up my phone with HiSuite but i am not sure can i recover my phone with it if i unbrick my phone?)
I am using EVA-L09C464B389 rom now.... On the other hand, i cant be sure which AL10 (Oreo) rom is right for me, because when i search in russian page you offered, there is more than one alternative...
I hope i can explain what i mean with my poor English...
Click to expand...
Click to collapse
How do you install Noigat custom ROM? - decide which custom ROM you want to use and then find its documentation and learn there how it must be installed.
And/or, find the forum/thread about that custom ROM and read the OP posts, and ask your questions there
Which AL10 ROM you want to install...bxs on Russian forum there are alternatives? - If you want to follow XDA guide, then READ it and you will find answer there.
But if you want to follow Russian guide, then register to the Russian forum and ask your questions there
Good night and good by, I'm disconnecting from this thread and will no more read/answer - good luck
Dear @zgfg
First of all thanks for all your answers, but I am not use Russian forum same time with here. The page you advice me (in xda), and the application in there, using Russian webpage to dl stock roms... Sorry if I make you angry...