Related
After changing my touchscreen, when i flash any Adrian's builds or Helium kernel 6.1 my phone can't access recovery and touchscreen doesn't work. But when i use any Adrian's builds with Helium Kernel lower than 6.0 - everything works fine.
P.s. stock CM 12.1 Nightlies with CM kernel also work without issues
Using Adrian's AICP and Helium 5.0 - everything works good.
Any ideas?
The safest answer would be the kernel apparently doesn't support the newer touchscreen you installed. I suspect driver issues but I may be wrong
wuarx said:
After changing my touchscreen, when i flash any Adrian's builds or Helium kernel 6.1 my phone can't access recovery and touchscreen doesn't work. But when i use any Adrian's builds with Helium Kernel lower than 6.0 - everything works fine.
P.s. stock CM 12.1 Nightlies with CM kernel also work without issues
Using Adrian's AICP and Helium 5.0 - everything works good.
Any ideas?
Click to expand...
Click to collapse
Starting from Helium 6 I cleaned up the config file of the kernel to match Adrian's. This removed a lot of unnecessary drivers but it might have removed some options that made your touchscreen work properly. Previously I used a very old config file. I'll compare the two configs and try to build another kernel that supports your touchscreen.
Same issue here, in TWRP i cannot use my touchscreen. (I changed 2 digitizer, last one give this problem)
F*** ! Digitizer not working on cm12.1 :'(
2.attempt : CM14.0 - Digitizer not working
---------- Post added at 12:13 PM ---------- Previous post was at 11:46 AM ----------
Have you solved this problem ?
---------- Post added at 01:01 PM ---------- Previous post was at 12:13 PM ----------
Tomoms said:
Starting from Helium 6 I cleaned up the config file of the kernel to match Adrian's. This removed a lot of unnecessary drivers but it might have removed some options that made your touchscreen work properly. Previously I used a very old config file. I'll compare the two configs and try to build another kernel that supports your touchscreen.
Click to expand...
Click to collapse
Is there any solution for this ?
Iekuta said:
Is there any solution for this ?
Click to expand...
Click to collapse
This issue has been fixed by Adrian ages ago.
Tomoms said:
This issue has been fixed by Adrian ages ago.
Click to expand...
Click to collapse
i wonder what the heck is going on with my screen.
I was on 4.1.2 , waiting STRYFLEX 2.0.
I changed my digitizer 3 days ago. No problems in 3 days.
But this morning, the screen go a little crazy (touched 3-4 times itself randomly ), but i did not care so much.
After that, i reboot to recovery /to install and try Sailfish OS.
But after Fastboot flash TWRP 3.0.2 /// BAMM BOOM %#$!!
The screen is not working anymore. I will try to reflash the stock with Flashtool.
and thanks for the reply
---------- Post added at 03:19 PM ---------- Previous post was at 02:41 PM ----------
I tried 4.3 but again, no response from digitizer.
Will flash 4.1.2 and make sure that the screen is completely gone
14.6 flat out doesn't work for me. 14.5 works but has a looping logcat issue that generates around 30gb of logs a day and drains battery in a hurry. Works ok for me, but won't work for my wife's phone (having her go in once every day or two to clear the logs is a non-starter). 14.37 is reported by some as working without the issue, but I can't find it anywhere. I attempted a build from source, however there is an issue with the sub module pull of SE linux for that tag, so I'm unable to build it myself. 14.0 isn't an option as it won't install on an Essential PH-1.
The segfault with v14.6 on Essential phones is known. No idea if it can be fixed though. Let's hope so...
Meanwhile, you can find old release on GitHub.
Didgeridoohan said:
Meanwhile, you can find old release on GitHub.
Click to expand...
Click to collapse
Since I'm not a dev and I'm on my phone and have the exact same problem (Magisk tell me to update to 14.6 and it cause bootloop, I have flah my phone with a backup to unbrick it), do you know where to find a useable version of Magisk 14.5, like you download and flash and it works?
And why do the dev erase old beta versions? It makes things complicated for no reasons... Magisk 14.5 was the only one to work on my phone. 14 don't works and 14.6 creates bootloop.
---------- Post added at 07:04 PM ---------- Previous post was at 06:42 PM ----------
Ok, one nice guy put it here : http://www.rootandroidblog.com/download-magisk-v-14-5-zip-last-release/
Already in use said:
Since I'm not a dev and I'm on my phone and have the exact same problem (Magisk tell me to update to 14.6 and it cause bootloop, I have flah my phone with a backup to unbrick it), do you know where to find a useable version of Magisk 14.5, like you download and flash and it works?
And why do the dev erase old beta versions? It makes things complicated for no reasons... Magisk 14.5 was the only one to work on my phone. 14 don't works and 14.6 creates bootloop.
---------- Post added at 07:04 PM ---------- Previous post was at 06:42 PM ----------
Ok, one nice guy put it here : http://www.rootandroidblog.com/download-magisk-v-14-5-zip-last-release/
Click to expand...
Click to collapse
For future reference, there's also the unofficial snapshots, where you can find builds by @DodoGTA and @kantjer.
Build 323
Pros:
1. Security patches updated to August 1st month
2. Fixed some NFC bugs in G pay
3. Fixed some languages
4. System Optimization
Cons:
1. No new features were added
2. Still no improvement in stock camera app
Note:
Luckily the camera 2 api which I enabled via rootless fastboot method before updating this version remains untouched... G cam is working after the update...
Post your comments
Is that mean we can use G cam without root?
okw95 said:
Is that mean we can use G cam without root?
Click to expand...
Click to collapse
Yes.
---------- Post added at 07:44 AM ---------- Previous post was at 07:41 AM ----------
Srihari315 said:
Build 323
Pros:
1. Security patches updated to August 1st month
2. Fixed some NFC bugs in G pay
3. Fixed some languages
4. System Optimization
Cons:
1. No new features were added
2. Still no improvement in stock camera app
Note:
Luckily the camera 2 api which I enabled via rootless fastboot method before updating this version remains untouched... G cam is working after the update...
Post your comments
Click to expand...
Click to collapse
Mind to tell us did number 4 pop out in the update note? Zentalk didn't put it in their official post.
Lxoric said:
Yes.
---------- Post added at 07:44 AM ---------- Previous post was at 07:41 AM ----------
Mind to tell us did number 4 pop out in the update note? Zentalk didn't put it in their official post.
Click to expand...
Click to collapse
Number 4 didn't pop up but this post isn't a release note... I mentioned only the pros and cons of this update
The update is live for non nfc variants too. What is the logic behind this?
I think the gcam is not working after update.
I'm using Asus Max Pro M1 for Malaysia, why am I receiving Yandex, Yandex Browser and Atok after installing the latest update?
Srihari315 said:
Build 323
Pros:
1. Security patches updated to August 1st month
2. Fixed some NFC bugs in G pay
3. Fixed some languages
4. System Optimization
Cons:
1. No new features were added
2. Still no improvement in stock camera app
Note:
Luckily the camera 2 api which I enabled via rootless fastboot method before updating this version remains untouched... G cam is working after the update...
Post your comments
Click to expand...
Click to collapse
Are u indian?
Does indian variant have nfc?
chronologie said:
I think the gcam is not working after update.
Click to expand...
Click to collapse
Nope it seems to be working. Kindly check the G cam apk you installed. If the problem still persists refer to this thread and repeat the process.
https://forum.xda-developers.com/as...ow-to/guide-enable-camera-api-2-root-t3823498
iamfarhanansari said:
Are u indian?
Does indian variant have nfc?
Click to expand...
Click to collapse
Indian version of this phone doesn't have NFC currently. Since some versions of this phone do have NFC, they have pushed the update wholesome.
Somebody has posted that the bluetooth low in call volume problem has been rectified in the latest FW
Lag
Is it just me who feels that the device has become a bit laggy after the latest update!?
Added Bluetooth avrcp profiles, ldap playback now possible. You can switch in developer settings or leave it on auto for best results). And yes, the Bluetooth low volume output is rectified.
Cookie Ninja said:
Added Bluetooth avrcp profiles, ldap playback now possible. You can switch in developer settings or leave it on auto for best results). And yes, the Bluetooth low volume output is rectified.
Click to expand...
Click to collapse
Ohh, it's been ages since it was implemented in our device. Am I right?
---------- Post added at 01:56 AM ---------- Previous post was at 01:55 AM ----------
cvng216 said:
Is it just me who feels that the device has become a bit laggy after the latest update!?
Click to expand...
Click to collapse
Give it a rest. A RESTart. ?
SleepingAran said:
I'm using Asus Max Pro M1 for Malaysia, why am I receiving Yandex, Yandex Browser and Atok after installing the latest update?
Click to expand...
Click to collapse
Yes same here in Malaysia , I read on another forum , it is the same situation in Indonesia
Hi,
It seems noone so far tryed to flash a treble GSI to the redmi 6. Im courious in doing this, but would like to discuss potential risks. What could go wrong?
After some reading i found the possibility that devices get problems running Google Apps, since they we're not certified.
To prevent this, you can register your Google Services ID in your Google Account.
1) Install the App "device ID" from Playstore, run it and copy the GSF.
2) Open this Page and paste your GSF. Click register, and your done.
Another thing is that there are two types of GSI Updates.
Type A/B and Type A. I ran the App "treble Check" from Playstore and it tells me that the redmi 6 ist treble supported and that I need the Type A GSI
Then it seems necessary to remove magisk/superSu/xposed to have a clean boot Image.
Loosing data is no problem for me.
Anyone any suggestions?
Tell us what works and what doesn't work.
---------- Post added at 12:16 PM ---------- Previous post was at 12:15 PM ----------
You use the TWRP in test ?
..i will not flash until i'm pretty Sure, nothing will go wrong.
I would like to understand what ist technicaly done.
After what i've read, its a normal fastboot flash, of the system partition. So, am I still able to run TWRP If anything goes wrong?
I guess the way to go, is to do a clean Fastboot flash of the official MiUi10 in advance to make sure my boot/ramdisk is clean. Then I would reflash TWRP and last the GSI.
What do you think?
(beside from 'let others risk their phone')
use this link for reference:
https://youtu.be/YI2CtIIPVaI
please, which treble GSI AOSP rom (8.1 or 9.0) advised with the most things working (calls, camera, fingerprint, sound...)??
thanks
i think Android 8.1 gsi rom is more stable as of now.
if u want to flash gsi rom
1. unlock bootloader by official way
2. flash twrp
3. do a factory reset in twrp
4. flash rom.
that's all.
nobody has tested yet?
no feed back on what's working and what doesn't?
I think i am gonna test soon, just gotta get some info... i was flashing intesively lot of phones in past, but now i had pause few years... seems lot of things changed - treble?! whaat?!
I just got this redmi 6, although i wanted 5, and seems it was big mistake, but nonetheless im gonna try and see. I dont remember any phone with 0 info and 0 feedback few years back.
snoerme said:
..i will not flash until i'm pretty Sure, nothing will go wrong.
I would like to understand what ist technicaly done.
After what i've read, its a normal fastboot flash, of the system partition. So, am I still able to run TWRP If anything goes wrong?
I guess the way to go, is to do a clean Fastboot flash of the official MiUi10 in advance to make sure my boot/ramdisk is clean. Then I would reflash TWRP and last the GSI.
What do you think?
(beside from 'let others risk their phone')
Click to expand...
Click to collapse
I Android world, if you experience like this, always something goes wrong. It's about testing what works, what doesn't. If you do things like these, you can't rely on stability anymore
snoerme said:
It seems noone so far tryed to flash a treble GSI to the redmi 6. What could go wrong?
Click to expand...
Click to collapse
Hey there everyone!
Since there are no custom ROM's currently available for our Redmi 6, i decided to give GSI ROM's a try. I tried los 15.1, and it worked! Wifi, bt, and even camera work. The only problem: The radio's don't work, so you cant make calls / sms /data. Other then that, the ROM is super fast and speedy. Also, there are no GApps and its not certified, so we gotta certify it I've tried only Lineage, but you can also try RR, HavocOS etc.
BTW, the Redmi 6 is ARM and A only.
Feedback from GSI Lineage OS
Hey Everyone!
I recently tried Lineage OS 15.1 GSI, and I've made a thread with all you wanna know here:
https://forum.xda-developers.com/redmi-6/how-to/rom-gsi-lineage-os-redmi-6-t3915146
---------- Post added at 12:41 PM ---------- Previous post was at 12:36 PM ----------
bilatche said:
Tell us what works and what doesn't work.
---------- Post added at 12:16 PM ---------- Previous post was at 12:15 PM ----------
You use the TWRP in test ?
Click to expand...
Click to collapse
Hey there !
Since there are no custom ROM's currently available for our Redmi 6, i decided to give GSI ROM's a try. I tried los 15.1, and it worked! Wifi, bt, and even camera work. The only problem: The radio's don't work, so you cant make calls / sms /data. Other then that, the ROM is super fast and speedy. Also, there are no GApps and its not certified, so we gotta certify it I've tried only Lineage, but you can also try RR, HavocOS etc.
https://forum.xda-developers.com/redmi-6/how-to/rom-gsi-lineage-os-redmi-6-t3915146
---------- Post added at 12:44 PM ---------- Previous post was at 12:41 PM ----------
snoerme said:
..i will not flash until i'm pretty Sure, nothing will go wrong.
I would like to understand what ist technicaly done.
After what i've read, its a normal fastboot flash, of the system partition. So, am I still able to run TWRP If anything goes wrong?
I guess the way to go, is to do a clean Fastboot flash of the official MiUi10 in advance to make sure my boot/ramdisk is clean. Then I would reflash TWRP and last the GSI.
What do you think?
(beside from 'let others risk their phone')
Click to expand...
Click to collapse
You don't need to fastboot flash the img, you can use TWRP too. And yes, TWRP works if anything goes wrong and worst case use Mi flash and rescue your phone. I tried los 15.1, here are my thoughts: https://forum.xda-developers.com/redmi-6/how-to/rom-gsi-lineage-os-redmi-6-t3915146
---------- Post added at 12:47 PM ---------- Previous post was at 12:44 PM ----------
bilatche said:
please, which treble GSI AOSP rom (8.1 or 9.0) advised with the most things working (calls, camera, fingerprint, sound...)??
thanks
Click to expand...
Click to collapse
Imo, this (https://forum.xda-developers.com/redmi-6/how-to/rom-gsi-lineage-os-redmi-6-t3915146) boots and works, but no calls :crying: If you want calls you'll need cereus's drivers. Don't expect everything to work with GSI.
---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------
bilatche said:
nobody has tested yet?
no feed back on what's working and what doesn't?
Click to expand...
Click to collapse
Hey there !
Since there are no custom ROM's currently available for our Redmi 6, i decided to give GSI ROM's a try. I tried los 15.1, and it worked! Wifi, bt, and even camera work. The only problem: The radio's don't work, so you cant make calls / sms /data. Other then that, the ROM is super fast and speedy. Also, there are no GApps and its not certified, so we gotta certify it I've tried only Lineage, but you can also try RR, HavocOS etc.
https://forum.xda-developers.com/red...dmi-6-t3915146
---------- Post added at 12:51 PM ---------- Previous post was at 12:49 PM ----------
vasillek said:
I think i am gonna test soon, just gotta get some info... i was flashing intesively lot of phones in past, but now i had pause few years... seems lot of things changed - treble?! whaat?!
I just got this redmi 6, although i wanted 5, and seems it was big mistake, but nonetheless im gonna try and see. I dont remember any phone with 0 info and 0 feedback few years back.
Click to expand...
Click to collapse
Hey there !
Since there are no custom ROM's currently available for our Redmi 6, i decided to give GSI ROM's a try. I tried los 15.1, and it worked! Wifi, bt, and even camera work. The only problem: The radio's don't work, so you cant make calls / sms /data. Other then that, the ROM is super fast and speedy. Also, there are no GApps and its not certified, so we gotta certify it I've tried only Lineage, but you can also try RR, HavocOS etc.
https://forum.xda-developers.com/red...dmi-6-t3915146 Btw, the Redmi 5 is better. Bigger screen, faster Snapdragon gpu, ir blaster etc
---------- Post added at 01:01 PM ---------- Previous post was at 12:51 PM ----------
anish sk said:
i think Android 8.1 gsi rom is more stable as of now.
if u want to flash gsi rom
1. unlock bootloader by official way
2. flash twrp
3. do a factory reset in twrp
4. flash rom.
that's all.
Click to expand...
Click to collapse
Hey which gsi rom is the best in your opinion?
snoerme said:
Hi,
It seems noone so far tryed to flash a treble GSI to the redmi 6. Im courious in doing this, but would like to discuss potential risks. What could go wrong?
After some reading i found the possibility that devices get problems running Google Apps, since they we're not certified.
To prevent this, you can register your Google Services ID in your Google Account.
1) Install the App "device ID" from Playstore, run it and copy the GSF.
2) Open this Page and paste your GSF. Click register, and your done.
Another thing is that there are two types of GSI Updates.
Type A/B and Type A. I ran the App "treble Check" from Playstore and it tells me that the redmi 6 ist treble supported and that I need the Type A GSI
Then it seems necessary to remove magisk/superSu/xposed to have a clean boot Image.
Loosing data is no problem for me.
Anyone any suggestions?
Click to expand...
Click to collapse
Don't know bro, since your post was 5 years old but here it is showing arm32_binder64_ab_system.img or a64_system_ab.img will work fine...
i.e in short Android 13 gsi will definitely gonna work
killerboychetan said:
Don't know bro, since your post was 5 years old but here it is showing arm32_binder64_ab_system.img or a64_system_ab.img will work fine...
i.e in short Android 13 gsi will definitely gonna work
Click to expand...
Click to collapse
I actually still Use this phone and am happy about your reply. Waited for IT about 5 years These days i will not find time to give it a try, but i will report if this changes.. Hopefully not in 5 years "
Is there a custom rom for nubia z20?
Or is there someone working on it?
Nubia x has a custom rom and i wish z20 has at least 1 custom rom (Android 10 based).
I checked the website of the guy who made nubia x rom and he doesn't have z20 listed under nubia phones
Is soon to see any custom ROM for this device... and maybe it never comes
Mokee team has developed a ROM for the Nubia X so maybe they will do the same for the Z20.
mir2006 said:
Is soon to see any custom ROM for this device... and maybe it never comes
Mokee team has developed a ROM for the Nubia X so maybe they will do the same for the Z20.
Click to expand...
Click to collapse
Has mokee team already said if they will make custom rom for nubia z20?
Keen to help move this along any way I can.
I can provide compute resources for the builds as well as experience with Linux and android app development.
Used to build RR for my OP3 but someone else did the inital vendor-isation. Not sure how to start or even what questions to ask first; proprietray blobs and all that jazz.
If anyone is in the know and wants to work with me on this, please get in touch. Happy to get involved with building any custom ROM.
---------- Post added at 05:24 PM ---------- Previous post was at 05:18 PM ----------
here are the blobs
https://github.com/AndroidBlobs/vendor_nubia_NX627J
Nubia z20 gets no love from rom developers.
It's a shame as most flagships have either notches or cutouts.
github.com/Flowertome/android_device_nubia_nx627j
There's a lineage OS (based on 10), Flowertome has developed it. Seem to be completed soon. Just wait.
bbs.nubia.cn/thread-2546466-1-4.html
Here's the topic, you can use Translate to Eng to check the updated.
[email protected] said:
github.com/Flowertome/android_device_nubia_nx627j
There's a lineage OS (based on 10), Flowertome has developed it. Seem to be completed soon. Just wait.
bbs.nubia.cn/thread-2546466-1-4.html
Here's the topic, you can use Translate to Eng to check the updated.
Click to expand...
Click to collapse
Great news! We have to be patient :fingers-crossed:
[email protected] said:
github.com/Flowertome/android_device_nubia_nx627j
There's a lineage OS (based on 10), Flowertome has developed it. Seem to be completed soon. Just wait.
bbs.nubia.cn/thread-2546466-1-4.html
Here's the topic, you can use Translate to Eng to check the updated.
Click to expand...
Click to collapse
Will they retain the dual screen multi tasking, dual screen always on display and squeeze functions?
Those 3 are the only functions I need aside from stock android
Is that still being done?i checked that thread and i think the first post is not being updated anymore
Last commit to the git repo was a week ago so the project is certainly still active, people have lives as well. I've started building lineageos for EU devices based on this device tree but am committed to other projects too. Keen to get something posted here so will share as soon as I have something relatively stable. At the moment, building the kernel is enough to be working on for me
Update android 10
A custom rom for nubia z20 has been released but I dont know if it works. Can someone install it and make a video about it? PM me / post everything here if it works. Make a video about it or something like that. I found that it might work but I am not sure if it has the "dual screen switcher" and the camera modes. My phone is not rooted and I can't do it . If yours is, try and post updates here. If its good, we might try it too.
link: www.getdroidtips.com/android-10-nubia-z20/
B4$Q said:
A custom rom for nubia z20 has been released but I dont know if it works. Can someone install it and make a video about it? PM me / post everything here if it works. Make a video about it or something like that. I found that it might work but I am not sure if it has the "dual screen switcher" and the camera modes. My phone is not rooted and I can't do it . If yours is, try and post updates here. If its good, we might try it too.
link: www.getdroidtips.com/android-10-nubia-z20/
Click to expand...
Click to collapse
I tried. You can search GSI Treble for tutourial.
But when it done. 2 Screen Front/Back will be always display. Can't turn it off.
---------- Post added at 08:42 AM ---------- Previous post was at 08:39 AM ----------
Here's the 1st Custom Rom for Z20, called "NubiaUI PRO", but i can't install via Twrp.
https://bbs.nubia.cn/thread-2558060-1-3.html
Link: https://pan.baidu.com/s/1VICOcoy5aRZo-3PASxK4GQ Extraction code: 540a
If the flashing fails, use the mt file manager (existed in the discussion group!) To decompress the zip package, and then select install-flash in twrp, and flash the 3 img files inside into the corresponding partitions. For example: system.img flashes the system partition vendor.img flashes the vendor partition boot.img flashes the md5 value of the boot partition file:
Click to expand...
Click to collapse
. Too lazy to test. Try it guys.
[email protected] said:
I tried. You can search GSI Treble for tutourial.
But when it done. 2 Screen Front/Back will be always display. Can't turn it off.
---------- Post added at 08:42 AM ---------- Previous post was at 08:39 AM ----------
Here's the 1st Custom Rom for Z20, called "NubiaUI PRO", but i can't install via Twrp.
https://bbs.nubia.cn/thread-2558060-1-3.html
Link: https://pan.baidu.com/s/1VICOcoy5aRZo-3PASxK4GQ Extraction code: 540a
. Too lazy to test. Try it guys.
Click to expand...
Click to collapse
If anyone can fix android 10 rom, post here. And I would like to know more about nubia ui pro.
B4$Q said:
If anyone can fix android 10 rom, post here. And I would like to know more about nubia ui pro.
Click to expand...
Click to collapse
Hi everyone, I'm trying to install nubia ui pro .. but I can't download the files .. can someone help me? Thank you
Hi everyone, I'm trying to download the 2 files for nubia z20. But I can't download them from the Chinese website. Is it possible to download them in another way? Thank you
baldo3097 said:
Hi everyone, I'm trying to download the 2 files for nubia z20. But I can't download them from the Chinese website. Is it possible to download them in another way? Thank you
Click to expand...
Click to collapse
Wait a minute. I'll upload in Google Drive
[email protected] said:
Wait a minute. I'll upload in Google Drive
Click to expand...
Click to collapse
OK thank you very much. I'm waiting.
https://drive.google.com/file/d/1mhiuHR_0ay1XKnfhL4jeGvEn7GUi71wM/view?usp=sharing
nubiaUI Pro2.0pre.zip | MD5: 376bdabc7101aebc321303f7b02dd621
https://drive.google.com/file/d/1VWDJ2RCL40PCwhpvdH3U_Q53LYtE0EmD/view?usp=sharing
NubiaUI Pro_Patch.zip
[email protected] said:
https://drive.google.com/file/d/1mhiuHR_0ay1XKnfhL4jeGvEn7GUi71wM/view?usp=sharing
nubiaUI Pro2.0pre.zip | MD5: 376bdabc7101aebc321303f7b02dd621
https://drive.google.com/file/d/1VWDJ2RCL40PCwhpvdH3U_Q53LYtE0EmD/view?usp=sharing
NubiaUI Pro_Patch.zip
Click to expand...
Click to collapse
Perfect. I will try immediately and let you know
baldo3097 said:
Perfect. I will try immediately and let you know
Click to expand...
Click to collapse
Do you have google play services on nubia ui pro? I would like to install it too. I hate the global rom with this ugly stock android 9. Its laggy