The following guide will allow you to upgrade firmware via OTA and retain root.
This method will work for moving up from any 10.0.x on EU and non EU variants of the 7t Pro including the McLaren edition, just ensure you set the correct device variant in Oxygen Updater
PREREQUISITE: Must be on rooted 10.0.x firmware before following the below guide
1) Download the Oxygen Updater app from the play store
2) Open Oxygen Updater - Go to settings and ensure you have your device set to the correct model e.g 'EU' and the update method is set to 'full update'
3) Download the latest available update but DO NOT install it
4) Navigate to Android settings>System>System update
5) Hit settings and then local update
6) Select the file downloaded from Oxygen Updater (will be on the root of your internal memory)
7) Wait for it to install and ensure you DO NOT reboot at the end
8) Go to Magisk manager and disable/delete any modules you have installed (will screw your device up if you leave them enabled)
9) In Magisk manager select install then 'install to inactive slot (After OTA)'
10) Reboot and you should be on the latest firmware with root retained
11) If you have Magisk modules you want enabled again don't just hit enable - remove them totally and redownload them before enabling
Note: you can use the system update menu in settings to obtain your OTA update, I use the oxygen updater method purely because they seem to distribute the firmware quicker in some regions. Just make sure you don't reboot after installation and then continue from step 8.
Hope this helps!
Mate your a star couldn't get magisk to stick done your way worked a charm
jaythenut said:
Mate your a star couldn't get magisk to stick done your way worked a charm
Click to expand...
Click to collapse
You're welcome, I've had so much help from XDA over the years it's nice to give something back when I can :good:
daveuk87 said:
You're welcome, I've had so much help from XDA over the years it's nice to give something back when I can :good:
Click to expand...
Click to collapse
Yeah it's good to help noobs like me ?
After I update from 10.03 to 10.0.4 still can't get root
And I finding the patch boot for 10.0.4 now
ricky886 said:
After I update from 10.03 to 10.0.4 still can't get root
And I finding the patch boot for 10.0.4 now
Click to expand...
Click to collapse
Yeah, as mentioned this is only for a clean upgrade from rooted 10.0.3 to 10.0.4. if you updated the firmware without this method you will lose root and need to source or create a patched 10.0.4 boot.img to root again.
daveuk87 said:
I've been asked a couple of times privately how I upgraded from 10.0.3 to 10.0.4 and maintained root on the EU OP7t Pro so thought I'd drop this here for anyone else curious;
PREREQUISITE: Must be on rooted 10.0.3 EU firmware before following the below guide
1) Download the Oxygen Updater app from the play store
2) Open Oxygen Updater - Go to settings and ensure you have your device set to the EU model and the update method is set to 'full update'
3) Download the 10.0.4 update but DO NOT install it
4) Navigate to Android settings>System>System update
5) Hit settings and then local update
6) Select the file downloaded from Oxygen Updater (will be on the root of your internal memory)
7) Wait for it to install and ensure you DO NOT reboot at the end
8) Go to Magisk manager and disable/delete any modules you have installed (will screw your device up if you leave them enabled)
9) Select install then 'install to inactive slot (After OTA)'
10) Reboot and you should be on 10.0.4 with root retained
11) If you have Magisk modules you want enabled again don't just hit enable - remove them totally and redownload them before enabling
Hope this helps simplify the upgrade for someone out there.
This works for the McLaren variant also (people keep asking whether there are differences in the process)
This will also work for the global firmware that released a couple of days back, just ensure you set the correct device in Oxygen Updater
Click to expand...
Click to collapse
Sir, can you upload your root boot?
thanks
ricky886 said:
Sir, can you upload your root boot?
thanks
Click to expand...
Click to collapse
If you're after the 10.0.3 rooted boot image check out @HolyChickenGuy 's thread. He sorted out the initial root of 10.0.3
His thread is here: https://forum.xda-developers.com/7t...-3-patched-boot-image-oneplus-7t-pro-t3986351
How the hell do you properly mention someone on the XDA app? Normal web syntax doesn't seem to work
Edit: ok it works but doesn't tag blue like a link
daveuk87 said:
If you're after the 10.0.3 rooted boot image check out @HolyChickenGuy 's thread. He sorted out the initial root of 10.0.3
His thread is here: https://forum.xda-developers.com/7t...-3-patched-boot-image-oneplus-7t-pro-t3986351
Click to expand...
Click to collapse
I tried it, this is not working with root
ricky886 said:
I tried it, this is not working with root
Click to expand...
Click to collapse
So you're stock 10.0.3 right now? No root? If so his boot image/method will definitely get you rooted, many, many of us have used his image..when done come here and follow upgrade instructions to get to 10.0.4. or alternatively wait for someone to dish out a patched image for 10.0.4. I don't have one myself as I upgraded from the previous firmware
daveuk87 said:
So you're stock 10.0.3 right now? No root? If so his boot image/method will definitely get you rooted, many, many of us have used his image..when done come here and follow upgrade instructions to get to 10.0.4. or alternatively wait for someone to dish out a patched image for 10.0.4. I don't have one myself as I upgraded from the previous firmware
Click to expand...
Click to collapse
No, I am using 10.0.4 global version now:crying:
ricky886 said:
No, I am using 10.0.4 global version now:crying:
Click to expand...
Click to collapse
Ah in that case you're a bit stuck temporarily. Maybe hit up @HolyChickenGuy he seems pretty active in this forum
ricky886 said:
No, I am using 10.0.4 global version now:crying:
Click to expand...
Click to collapse
Just found this no idea if it works but can't hurt to try
https://www-gizmochina-com.cdn.ampp...1/17/oneplus-7t-pro-magisk-auto-install-tool/
Hi @daveuk87,
you don't actually need the Oxygen Updater, as long as you're going to update through internal updater. Oxygen Updater might get usefull, when we get TWRP.
But if you're rooted, but without custom recovery simply do the following steps:
1. Go to Settings>System>System update
2. Select "Download & Install"
3. Follow Steps 7 - 11 from OP.
Did exactly that and it worked without issues.
Sajito said:
Hi @daveuk87,
you don't actually need the Oxygen Updater, as long as you're going to update through internal updater. Oxygen Updater might get usefull, when we get TWRP.
But if you're rooted, but without custom recovery simply do the following steps:
1. Go to Settings>System>System update
2. Select "Download & Install"
3. Follow Steps 7 - 11 from OP.
Did exactly that and it worked without issues.
Click to expand...
Click to collapse
You're absolutely right but the update wasn't showing for me at the time of writing so it's just to get around that if it hasn't rolled out to you officially yet
daveuk87 said:
9) Select install then 'install to inactive slot (After OTA)'
Click to expand...
Click to collapse
Just want to make sure i get this right lol am I right to assume this is in magisk manager?
dillup said:
Just want to make sure i get this right lol am I right to assume this is in magisk manager?
Click to expand...
Click to collapse
It is yes
6) Select the file downloaded from Oxygen Updater (will be on the root of your internal memory)
Click to expand...
Click to collapse
Could not install the update . Getting error
jfm91 said:
Could not install the update . Getting error
Click to expand...
Click to collapse
Same here but got the update through the phone then just done the magisk stuff
Related
https://forums.oneplus.com/threads/oxygenos-9-5-4-9-5-5-for-oneplus-7-pro-global-eu.1039379/
I have the 9.5.4 update so I'm not sure if the 9.5.5 update will break your phone. Please be cautious!
THIS IS NOT FOR THE T-MOBILE VERSION!!!
Download:
http://www.mediafire.com/file/eq69x...007-008_patch_1905230032_c8d355a8385.zip/file
To install, copy the zip to the root of your phone, then go into check for updates and hit the settings cog in the upper left, then local update
You can share that here: https://forum.xda-developers.com/on...on-feedback-oxygenos-9-5-3-ota-t3931090/page4
If I'm rooted and install this will my phone be bricked?
TacoTuco said:
If I'm rooted and install this will my phone be bricked?
Click to expand...
Click to collapse
Not sure, but I believe so. I think rooted you need the full zip not the ota patch
Has anyone else used this when not rooted and successful?
equlizer said:
Has anyone else used this when not rooted and successful?
Click to expand...
Click to collapse
https://old.reddit.com/r/oneplus/co..._oneplus_7_pro_globaleu_is/eotjbt6/?context=3
Is this 9.5.4 or 9.5.5? Would it matter which I installed if I use the device in the US? Global version here.
Installation fails at 80% every time. Im fully stock 9.5.3
Don't want to hijack this thread, but I've added full signed zips for both GM21AA (India/Global) and GM21BA (EU) variants in my thread.
Downloaded and applied without issue.
Sorry, what is the point of this thread? OnePlus has already started posting downloads for the OnePlus 7 Pro and this build has also been out for nearly a week now?
https://www.oneplus.com/uk/support/softwareupgrade/details?code=11
OK, Sorry, just read the OnePlus thread :
"We are starting to push the incremental roll-out of OxygenOS 9.5.4 and 9.5.5, they are essentially the same builds, but due to recent regulations in the EU and as per Google's instructions we have 2 builds now, one specifically for EU region."
Meh, I'm in Scotland, I'll push whichever version of the rom I want out, we're gonna be dragged out of Europe kicking and screaming any day now anyway so what the hell.
OxygenOS 9.5.5 was released
mazdamiata210 said:
Not sure, but I believe so. I think rooted you need the full zip not the ota patch
Click to expand...
Click to collapse
Can you or someone else point us noob guys in the right direction on how to update if we are rooted with magisk?
Sent from my GM1911 using Tapatalk
TacoTuco said:
Installation fails at 80% every time. Im fully stock 9.5.3
Click to expand...
Click to collapse
You Will most likely to be on 9.5.4
Got the full v9.5.4 update for the GM21AA. My plan is:
Boot to TWRP, flash full v9.5.4
Flash TWRP zip, reboot TWRP
Flash Magisk v19.2
Flash kernel
Reboot system. Am I on a right track?
Tx guys.
ankursethi said:
Can you or someone else point us noob guys in the right direction on how to update if we are rooted with magisk?
Click to expand...
Click to collapse
Install the oneplus updater app from the playstore. You can download the full .zip file to flash in twrp. Good luck
Please read all indications before proceeding.
Proceed always at your own risk!!!
I did the test to perform the transition from OpenBeta firmware to stable release, using the keep_data file without deleting data, and keeping the root already present on the phone.
The steps are simple, first of all you need to:
Download the complete firmware file
Download the keep_data apk file
save them in the phone's memory, after which you proceed with the local update (ignore the data deletion warning) and once the installation is completed you DO NOT NEED TO RESTART THE PHONE (if you restart now all data will be erased).
Now we install the keep_data.apk and run it, confirming that we do not want to delete the data, even now we DO NOT RESTART but we open magisk, select the "install" button next to the magisk version already present and select "install in the inactive slot (after OTA)", proceed with the installation and when completed, we can finally reboot.
We will have our Oneplus with OxygenOS 11 Stable firmware, root and magisk installed and all our data present.
I tested everything on Oneplus 7 going from OpenBeta4 to OxygenOS 11.0.1.1, I still recommend making a backup of all your data before proceeding, safety first of all.
TESTED ONLY WITH OXYGENOS 11 FIRMWARE.
The keep_data application, has been released for use with OxygenOS 11, I have no way of knowing if it is also possible to use it with OxygenOS 10.
I was a tester and everything went smoothly, no problems or abnormal behavior but
it is important to remember that proceed always at your own risk!!!
full wipe is always recommended in the transition from beta to stable and vice versa.
Good luck!
Original reference source for the keep_data.apk file, present on the oneplus forum here.
UPDATE: the guide is valid and working even using the rollback package firmware necessary to switch from OpenBeta 5 to OxygenOS 11.0.1.1
Proceed always at your own risk!!!
If I wanna try this, it means that I have to install the rollback build from here and then install the keep_data.apk, right?
kamalikhwan3 said:
If I wanna try this, it means that I have to install the rollback build from here and then install the keep_data.apk, right?
Click to expand...
Click to collapse
I didn't use the rollback package, I used the standard 11.0.1.1 firmware.
I believe that, with rollback package, wipe is done before firmware installation so keep_data apk would be useless.
However, using the standard firmware file I have not encountered any problems.
UPDATE: keep_data apk work also with rollback package firmware.
dianoandr said:
I didn't use the rollback package, I used the standard 11.0.1.1 firmware.
I believe that, with rollback package, wipe is done before firmware installation so keep_data apk would be useless.
However, using the standard firmware file I have not encountered any problems.
Click to expand...
Click to collapse
Alright. I already downloaded the full 11.0.1.1 firmware but now a new problem arise in which it doesn't allow me to downgrade as per the attached image. My device is OnePlus 7 Pro and currently on Open Beta 5. Is there any workaround for this?
kamalikhwan3 said:
Alright. I already downloaded the full 11.0.1.1 firmware but now a new problem arise in which it doesn't allow me to downgrade as per the attached image. My device is OnePlus 7 Pro and currently on Open Beta 5. Is there any workaround for this?
Click to expand...
Click to collapse
Unfortunately this is normal, OpenBeta 5 is newer than stable 11.0.1.1.
In this situation, the options are full wipe with the rollback firmware package, another option is to wait for a new stable firmware release, that will be newer than openbeta 5, another option is to check if the procedure I wrote also works with the firmware rollback but I have no information about it.
kamalikhwan3 said:
Alright. I already downloaded the full 11.0.1.1 firmware but now a new problem arise in which it doesn't allow me to downgrade as per the attached image. My device is OnePlus 7 Pro and currently on Open Beta 5. Is there any workaround for this?
Click to expand...
Click to collapse
Update from the Oneplus forum:
the guide is valid and working even using the rollback firmware necessary to switch from OpenBeta 5 to OxygenOS 11.0.1.1
Tried this just now and it works flawlessly! Thanks bud!!!! Now to wait until the pixel 6 comes out and switch to that
FYI for those who want, the new stable update V11.0.2.1 can be updated over Beta 5 without having to use the rollback update and using the keep_data apk works to avoid wiping data when flashing.
Hello is that working for Update from 11.0.0.2 to 11.0.2.1 without losing root ?
prad1po said:
Hello is that working for Update from 11.0.0.2 to 11.0.2.1 without losing root ?
Click to expand...
Click to collapse
No, this guide Is only for switch from beta firmware to stable without data wipe.
For update firmware without losing root, follow this step (before to start make a BACKUP, BACKUP, BACKUP,
BACKUP, BACKUP ):
Remove all installed magisk module and reboot phone.
Download full firmware 11.0.2.1 and save in phone storage memory.
Install new firmware but DO NOT REBOOT WHEN INSTALLATION IS COMPLETE.
Open Magisk and select "install" in magisk section.
Select "Install to inactive slot (After OTA update)".
When magisk installation end, reboot your phone.
Restore your magisk module.
Finish...latest firmware release installed and rooted .
Regards.
Thank you
My phone is rooted with a modified boot.img
It will work also ?
prad1po said:
Thank you
My phone is rooted with a modified boot.img
It will work also ?
Click to expand...
Click to collapse
Yes, work only with pre-rooted phone, to retain root after a firmware update
thanks for your help
it's worked perfectly
Just used this to rollback from Open Beta 5 to stable, thank you!!
Will it work with a prerooted phone?
I mean I am just on beta build (didn't root). Can I install the stable firmware and use the app to retain the data? Or is root a pre-requisite?
Shubham87 said:
Will it work with a prerooted phone?
I mean I am just on beta build (didn't root). Can I install the stable firmware and use the app to retain the data? Or is root a pre-requisite?
Click to expand...
Click to collapse
Root privileges is not required to perform the firmware change while retaining user data, just ignore the magisk installation step and reboot phone after running the keep_data application
dianoandr said:
Root privileges is not required to perform the firmware change while retaining user data, just ignore the magisk installation step and reboot phone after running the keep_data application
Click to expand...
Click to collapse
Thank you.
I have a new problem now. Local upgrade is not allowing me to install the 11.0.0.2.GM21AA firmware. I am currently running O2_Beta_5.
Local upgrade says "Version of selected package is lower than that of current system, hence downgrading not allowed".
Please help.
Shubham87 said:
Thank you.
I have a new problem now. Local upgrade is not allowing me to install the 11.0.0.2.GM21AA firmware. I am currently running O2_Beta_5.
Local upgrade says "Version of selected package is lower than that of current system, hence downgrading not allowed".
Please help.
Click to expand...
Click to collapse
You cannot update with "Local upgrade" feature, if the new firmware is older than the firmware installed on the phone.
If you currently have Openbeta 5 firmware, you can install the stable 11.0.2.1 or the latest 11.0.3.1.
The downgrade is still possible but requires a specific firmware package and the complete data wipe.
Thread closed on request of OP @dianoandr as the OP doesn't possess the device any longer!
Good afternoon
The XD team (Xyen and Dargonswim) has managed to port the Chinese betas with Android 12 for anyone who wants to test it.
You only need to have the bootloader open.
Installation (FASTBOOT):
- Enter fastboot mode (vol - and power).
- Connect the phone to the pc (have the USB debugging enabled).
- The first time it is recommended to do a clean install. Enter cmd and choose windows_fastboot_first_install_with_data_format.ba t option. (Use the corresponding file for other platforms).
- Then you only need to use the update file.
- Wait 10 minutes for the process to finish. Do not disconnect the mobile at any time.
xdroms
Download xdroms for free. None
sourceforge.net
Note: Language English/Chinese
Disclaimer:
XD Team is not responsible for bricks or any other problems. Before flashing! Keep in mind you have chosen to make these modifications and that it is your sole responsibility.
STOCK KERNEL: https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/star-r-oss
Acknowledgements:
===========
KrosTech
FlyGoat
Chujalt
JC_BC
Great news. Simple and safe method and the original Chinese beta ROM without modifications under Android 12. Congratulations and good work.
I re-flashed the global A11 ROM for the sake of updates.
I can assume that if I flash this one, I won't get any updates. Is that accurate?
dargonswim said:
I re-flashed the global A11 ROM for the sake of updates.
I can assume that if I flash this one, I won't get any updates. Is that accurate?
Click to expand...
Click to collapse
you will certainly not receive by OTA, you will have to update the roms by fasboot
Works on Mi 11 pro?
Vman006 said:
Works on Mi 11 pro?
Click to expand...
Click to collapse
should be
where is the download link to try it? plaese..
Never mind i found it
working fine on mi 11 pro thanks
works on mi 11 pro
easy method thanks
kurador911 said:
works on mi 11 pro
easy method thanks
Click to expand...
Click to collapse
Works legit for me too
Pretty nice visually
Haven't found bugs yet
Anyone else?
dargonswim said:
should be
Click to expand...
Click to collapse
Thanks! it works on 11 pro. i cant use netflix and other banking apps tho, can i root this beta rom?
Vman006 said:
Thanks! it works on 11 pro. i cant use netflix and other banking apps tho, can i root this beta rom?
Click to expand...
Click to collapse
yes, you can root if you want it
dargonswim said:
yes, you can root if you want it
Click to expand...
Click to collapse
i can't root it, i flashed twrp no storage detected
Vman006 said:
i can't root it, i flashed twrp no storage detected
Click to expand...
Click to collapse
expected that actual TWRP is not working correct with A12. But you can install the the magisk.app and patch the boot.img file (extract it from payload with payload-dumper on PC). Once you have patched the file copy it back to the PC and put the mobille into fastboot. Then with command "fastboot boot patched_boot_image.img" you will start with Magisk for your session. If you want to have root permanent after phone is up go directly to the Magisk app and install it "again" directly.
RoughNeck1971 said:
expected that actual TWRP is not working correct with A12. But you can install the the magisk.app and patch the boot.img file (extract it from payload with payload-dumper on PC). Once you have patched the file copy it back to the PC and put the mobille into fastboot. Then with command "fastboot boot patched_boot_image.img" you will start with Magisk for your session. If you want to have root permanent after phone is up go directly to the Magisk app and install it "again" directly.
Click to expand...
Click to collapse
Legit AF
you need to install this new twrp , with that its possible to force flash payload rom.
attached :TWRP_Mi11Ultra_3.5.2_11
and with TOOL ALL IN ONE you can even flash with that buggy twrp opened
attached: TOOL_ALL_IN_ONE_2.0.1.4.zip
[TOOL] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)
Hello everyone, today I present my new creation: we are talking about a tool that allows you to do many things , from the bootloader to flash the factory image , comfortably. Now you're probably asking: but there are already other tools available...
forum.xda-developers.com
Honestly I'll skip this. Global ROM on A11 is almost flawless. I'll wait for official rollout
new rom uploaded: 21-10-20
dargonswim said:
new rom uploaded: 21-10-20
Click to expand...
Click to collapse
archive file is broken. please re-upload. it also has smaller size
mohammed510 said:
archive file is broken. please re-upload. it also has smaller size
Click to expand...
Click to collapse
re-upload it
Hi, I'm not able to upgrade my Zenfone 8 to android 12. My current version is 30.12.112.82. Which .zip do I have to download? Thanks.
You can try this:
Go to https://www.asus.com/Content/Android-12-Beta/ and scroll down to "How to opt-out and revert back to Android 11". Download the file and follow the 3 steps.
After you reverted back, download "Version WW-30.12.112.72" from official website, install it and than download the newest Android 12 image from official website.
T3chDelicious said:
You can try this:
Go to https://www.asus.com/Content/Android-12-Beta/ and scroll down to "How to opt-out and revert back to Android 11". Download the file and follow the 3 steps.
After you reverted back, download "Version WW-30.12.112.72" from official website, install it and than download the newest Android 12 image from official website.
Click to expand...
Click to collapse
Thanks. But how the hell is possible that I have to do all this things just to update to Android 12?
I'm on latest A11 why can't I just update?
mr.pio said:
Thanks. But how the hell is possible that I have to do all this things just to update to Android 12?
I'm on latest A11 why can't I just update?
Click to expand...
Click to collapse
It seems that ASUS is still polishing the A12 update. You have the bad luck that you are on a firmware version that doesn't support the direct update to Android 12.
mr.pio said:
Hi, I'm not able to upgrade my Zenfone 8 to android 12. My current version is 30.12.112.82. Which .zip do I have to download? Thanks.
Click to expand...
Click to collapse
download the file from asus support website this is the link for the latest android 12 : https://dlcdnets.asus.com/pub/ASUS/...06D-ASUS-31.1004.0404.92-1.1.25-2112-user.zip
put the file in your main folder on the phone, restart the phone and the system should recognize that there is a system update file. if you want to go back to android 11 there is a firmware file to go back: https://dlcdnets.asus.com/pub/ASUS/...06D-ASUS-99.1004.0404.82-1.1.31-9999-user.zip
same steps as before
mr.pio said:
Hi, I'm not able to upgrade my Zenfone 8 to android 12. My current version is 30.12.112.82. Which .zip do I have to download? Thanks.
Click to expand...
Click to collapse
Yes, I followed this instructions and worked fine:
Download the version that you need from the Asus Zenfone 8 Support page
Plug in your phone to your computer, make sure the computer is trusted and that you can transfer files from the PC to the phone.
Move the zip file of the update in the base directory of the phone (The same directory as Alarms, Downloads, etc).
Wait for the transfer to finish, then you can unplug your phone if you want.
Reboot the phone
After the reboot, the phone will take a few seconds/minutes and will notify you that an update file was found, select the option to update the phone
It will then extract the update and install it all by itself, the normal update procedure starts from there
(from https://forum.xda-developers.com/t/...asus-zenfone-8-and-relock-bootloader.4386359/)
What about rooting from version 31.1010.0410.43 android 12? Thank you
Goldsusanoo said:
What about rooting from version 31.1010.0410.43 android 12? Thank you
Click to expand...
Click to collapse
Hey, this is the wrong thread, but the procedure should be the same as on Android 11, follow the instructions from this article: https://www.getdroidtips.com/root-asus-zenfone-8-zs590ks/, or you can do it with TWRP by sideloading the magisk apk (idk if it matters, but I renamed mine from .apk to .zip)
Adaoh said:
Hey, this is the wrong thread, but the procedure should be the same as on Android 11, follow the instructions from this article: https://www.getdroidtips.com/root-asus-zenfone-8-zs590ks/, or you can do it with TWRP by sideloading the magisk apk (idk if it matters, but I renamed mine from .apk to .zip)
Click to expand...
Click to collapse
Thank you for the reply. The Zenfone is pretty good, but not on T mobile. It lacks 3 key 5G bands. So I returned it
Everybody trying to flash/boot and everthing that couild work.
But how many have get the eu-version or global?
Have it work for nobudy?
Or that is am that doesnt get what some happen.
Are that money some waiting på Andriod 13, it should couils change language to every app.
I waiting on that, i dont come longer then unlock boatlooder.
Or are that somebody that have any simple instructures ?
I only understand from your message, that you are asking if there is anyone who is using global/eu ROM, correct? So I do use it.
Yes, that was that i was asking,i have tried many different ways but i dont get it.
Did you fink it was easy?
zelma83 said:
Yes, that was that i was asking,i have tried many different ways but i dont get it.
Did you fink it was easy?
Click to expand...
Click to collapse
I have OP10P which is global unlocked at all so I didn't need to switch from chinese coloros to global/europe OOS.
Ok, that was nice
I have eu op10pro unlocked and rooted.
I've got a guide on how to root, plus the stock and patched boot images, I'll release them on each new update.
All will be EU
(Guide) Rooting, payload dumper, magisk_patched guides NE2213
Hi all, Thought i'd share a guide on how to get these boot images yourself as well as all the files required, plus the patched boot.img if you just want to go ahead and boot/flash it without obtaining one yourself Please read the process before...
forum.xda-developers.com
Great,
But im in mac.
I download the files but i dont know to open then on mac.
And my phone is NE2210_11_A.13. Couild it work with yours settings and files?
Which firmware are to mine?
Thanks that you wrote to me.
zelma83 said:
Great,
But im in mac.
I download the files but i dont know to open then on mac.
And my phone is NE2210_11_A.13. Couild it work with yours settings and files?
Which firmware are to mine?
Thanks that you wrote to me.
Click to expand...
Click to collapse
You'd need windows..
So if you're on a Mac like I am for work then you could use boot camp and have a dual boot or just get parallels, have an OS within an OS, it's £70 a year but it works extremely well..
mxmda said:
I have eu op10pro unlocked and rooted.
Click to expand...
Click to collapse
I've also
Me too
Ok how have you done, like his setttings?
It says that i have one update in oxygen updater, but then it go to recovery,wipe data, reboot. I have tried all.
But couild i use magisk boot file that is to NE2210_11_A.13. like my phone is?
zelma83 said:
Ok how have you done, like his setttings?
It says that i have one update in oxygen updater, but then it go to recovery,wipe data, reboot. I have tried all.
But couild i use magisk boot file that is to NE2210_11_A.13. like my phone is?
Click to expand...
Click to collapse
Your phones saying you have an update?
If you're rooted then you do not want to update the conventional way..
This is in my guide on rooting mate. Just follow it.
In short to update you do this.
1. Install oxygen updater
2. Change update method to full in the app.
3. If an update is available then download the whole thing, it'll be big.
4. Once downloaded, back out and navigate to the normal phones system update and click the 3 dots, then select local upgrade.
5. Take the update and let it install.
DO NOT REBOOT WHEN PROMPTED!!!
6. Back out and open Magisk.
7. Click the top install button and then install after OTA.
8. Reboot and you're updated and rooted.
I'm on NE2210_11_A.13 too, local install doesn't work (it doesn't recognize the Oyxgen ROM)
Ultimatum99 said:
I'm on NE2210_11_A.13 too, local install doesn't work (it doesn't recognize the Oyxgen ROM)
Click to expand...
Click to collapse
Turn on airplane mode,turn off wifi, then reboot, does it show it then?
read this the other day, someone was able to get it to show by doing something like this.
Or could be a Magisk module causing it, if you disable them then reboot, that may make it work.
dladz said:
Turn on airplane mode,turn off wifi, then reboot, does it show it then?
read this the other day, someone was able to get it to show by doing something like this.
Or could be a Magisk module causing it, if you disable them then reboot, that may make it work.
Click to expand...
Click to collapse
It doesn't show if there is an update pending to install. Solution is to reset the phone and not connect it to the internet or to delete the installation hidden files.
Unfortunately the problem is not finding the option, but that when you pick the .zip for Local Install it says it's invalid. I've downloaded the ROM .zip file directly from Oxygen Updater and from external links to no avail.
Ultimatum99 said:
It doesn't show if there is an update pending to install. Solution is to reset the phone and not connect it to the internet or to delete the installation hidden files.
Unfortunately the problem is not finding the option, but that when you pick the .zip for Local Install it says it's invalid. I've downloaded the ROM .zip file directly from Oxygen Updater and from external links to no avail.
Click to expand...
Click to collapse
Ahh I see so can I clarify, at the moment you're on the Chinese OOS?
And you're attempting to install another regions firmware?
dladz said:
Ahh I see so can I clarify, at the moment you're on the Chinese OOS?
And you're attempting to install another regions firmware?
Click to expand...
Click to collapse
Correct, NE2210_11_A.13 is the Chinese version. I'm attempting to simply install an OxygenOS official ROM but it's not allowing to. I have an OP8 Plus and it worked very easily, simply pick the original ROM, local upgrade (now the option is called "Local install" instead) and then clean cache and good to go. This is not working now for whatever reason. I tried both in A.12 CN to A.12 EU and A.13 CN to A.12 EU.
dladz said:
Your phones saying you have an update?
If you're rooted then you do not want to update the conventional way..
This is in my guide on rooting mate. Just follow it.
In short to update you do this.
1. Install oxygen updater
2. Change update method to full in the app.
3. If an update is available then download the whole thing, it'll be big.
4. Once downloaded, back out and navigate to the normal phones system update and click the 3 dots, then select local upgrade.
5. Take the update and let it install.
DO NOT REBOOT WHEN PROMPTED!!!
6. Back out and open Magisk.
7. Click the top install button and then install after OTA.
8. Reboot and you're updated and rooted.
Click to expand...
Click to collapse
It didnt work.
But look here you can se update is availble but not install.
It is in full mode.
I think that i most find something else.