Related
I have it set on the defaults. 245-998. and governor on demand. does this make sense? abit noobish sorry. running enomther
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Also, I hope all these settings are reversible.. ie if I uninstall the program it goes back to what it was before?
The default settings is what heard works best. I don't use setup because it feels like I get worse battery life with it. I feel my phone gets great battery life without the program. Yes if you uninstall and reboot you are back to the settings before you installed the program.
That's not the part that saves battery, you need to enable profiles and down clock the cpu when it is asleep.
Which profiles do we enable? (that's the same basic setup I'm using too)
anyone?
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
I'm sure someone will answer. I just downloaded set CPU to play with so once I find something I'll post.
you can enable the sleep/standby profile (setting the max to 245 and min as 245 as well); you can also set up the charging profile, failsafe profile, and when the power is below certain level
EDIT: the very basic setting to save some battery would be to enable the Standby/Sleep profile (set both max/min to 245)
Ok. Looking at it it seems very simple.enable profiles. Edit the sleep profile and set tour max to whatever you like. Seems straightforward to me, this is the first time I've looked or messed with it.
Oops. Should've refreshed before posting.
Ok. I'm using Enomther 1.8.1. And in spare parts there is a setting to set max and min cpu frequency, i left it as defualt which is the same default in SetCPU min max 245/998
So I went into profiles and enables sleep profile and set min max 245/245 but when I come out.. it says my defualt is now max min 384/245
Why did the defualt change im using only sleep profile and main profile
EDIT: makes sense the Max would fluctuate since I set it on demand.. Of course I wouldnt expect the CPU to be at 998 all the time . Sleep set at 245/245
I set all profiles to be 'on demand' and then sleep is 245/245, awake is 245/1113 and charging is 245/652 (stop it getting too hot)
imo sleep on 245/245 isn't the best. cos basic functions like clock won't be updated. it would update when wake causing even more CPU draw. my sleep is set at 325 max
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
exactly. Oh by the way, I just saw your msg, I use both juicedefender and setcpu.
S_Dot said:
imo sleep on 245/245 isn't the best. cos basic functions like clock won't be updated. it would update when wake causing even more CPU draw. my sleep is set at 325 max
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
can you tell me your full set CPU profiles and their values
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Replied to your PM
S_Dot said:
can you tell me your full set CPU profiles and their values
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
rjhay22 said:
Replied to your PM
Click to expand...
Click to collapse
So anyone with setcpu experience willing to help yet?
Sorry... It wasnt meant to be a secret lol.
Heres my Set CPU setting if im not using AVS.
Default: 998/245
Profile Settings
Charging: 806/245
Sleep/Standby: 384/245
Power < 40% : 886/245
Power < 30% : 844/245
Power < 20% : 806/245
Failsafe Batt > 40C : 768/245
Good Luck!
PhantomRampage said:
So anyone with setcpu experience willing to help yet?
Click to expand...
Click to collapse
Thanks for the help man, hopefully this'll help me out a bit with my battery life.
Those profiles are all 'on demand' though right?
PhantomRampage said:
Thanks for the help man, hopefully this'll help me out a bit with my battery life.
Those profiles are all 'on demand' though right?
Click to expand...
Click to collapse
They all are
I think I'm in the right forum for this question. I have a htc one myself. Sorry if the language is a bit bad. i'm studying english!
Hi, I came to think of CPU and GPU profiles for The ONE. If there would be a kind of app or tweak that can change the "governor" and "frequencies" of apps you select.
It would help with battery savings. Someone who knows?
If you're rooted, then SetCPU can be used to set CPU profiles. You can set what settings, governers and schedulers your kernel will change to for each and every app that launches if you want
ArmedandDangerous said:
If you're rooted, then SetCPU can be used to set CPU profiles. You can set what settings, governers and schedulers your kernel will change to for each and every app that launches if you want
Click to expand...
Click to collapse
Cool, yes i'm rooted! Also i find this on the web,
HTML:
http://forum.xda-developers.com/showthread.php?t=1018245
But tanks anyways :good:
falkonfalk said:
Cool, yes i'm rooted! Also i find this on the web,
HTML:
http://forum.xda-developers.com/showthread.php?t=1018245
But tanks anyways :good:
Click to expand...
Click to collapse
Tasker is a wholly different thing as it can control almost everything about the phone not just the CPU profiles. Since you're only needing CPU profiles, SetCPU has a much cleaner UI and easier to set profiles for games you want performance on
Has anyone else noticed or does anyone else gave a solution to the major decrease in smoothness and fluidity of Lollipop's animations and UI navigation when using any of the current custom kernels available?
I've mostly used Sensei and I LOVE everything it allows me to do; especially battery life enhancement gained from tweaking voltage and clock speed but... One of the primary things I noticed in Lollipop when I first unboxed my nexus was how gorgeous and pleasant and smooth my phone was to use! It was like Project Butter all over again but instead properly implemented! As soon as I flash a custom kernel however, this goes away and animations can sometimes briefly hang, they're choppy, and their speeds are inconsistent.
Might there be a specific settings or value I can change or adjust that could be affecting this? Perhaps it has to do with vertical sync. Maybe the kernel is disabling this for battery sake.
I'm going to look into this, but as I do, let this be the place for anyone to share, complain, agree, or resolve or expound upon this particular issue.
thair7391 said:
Has anyone else noticed or does anyone else gave a solution to the major decrease in smoothness and fluidity of Lollipop's animations and UI navigation when using any of the current custom kernels available?
I've mostly used Sensei and I LOVE everything it allows me to do; especially battery life enhancement gained from tweaking voltage and clock speed but... One of the primary things I noticed in Lollipop when I first unboxed my nexus was how gorgeous and pleasant and smooth my phone was to use! It was like Project Butter all over again but instead properly implemented! As soon as I flash a custom kernel however, this goes away and animations can sometimes briefly hang, they're choppy, and their speeds are inconsistent.
Might there be a specific settings or value I can change or adjust that could be affecting this? Perhaps it has to do with vertical sync. Maybe the kernel is disabling this for battery sake.
I'm going to look into this, but as I do, let this be the place for anyone to share, complain, agree, or resolve or expound upon this particular issue.
Click to expand...
Click to collapse
I'm running the latest Sensei and I've not even experienced any lags or stuttering, have you rebooted the phone and are you decrypted?
thair7391 said:
Has anyone else noticed or does anyone else gave a solution to the major decrease in smoothness and fluidity of Lollipop's animations and UI navigation when using any of the current custom kernels available?
I've mostly used Sensei and I LOVE everything it allows me to do; especially battery life enhancement gained from tweaking voltage and clock speed but... One of the primary things I noticed in Lollipop when I first unboxed my nexus was how gorgeous and pleasant and smooth my phone was to use! It was like Project Butter all over again but instead properly implemented! As soon as I flash a custom kernel however, this goes away and animations can sometimes briefly hang, they're choppy, and their speeds are inconsistent.
Might there be a specific settings or value I can change or adjust that could be affecting this? Perhaps it has to do with vertical sync. Maybe the kernel is disabling this for battery sake.
I'm going to look into this, but as I do, let this be the place for anyone to share, complain, agree, or resolve or expound upon this particular issue.
Click to expand...
Click to collapse
I don't know much about the specific custom kernels, but i always find the ones that don't use mpdecision or some sort of CPU boost aren't as quick and smooth in my experience
italia0101 said:
I don't know much about the specific custom kernels, but i always find the ones that don't use mpdecision or some sort of CPU boost aren't as quick and smooth in my experience
Click to expand...
Click to collapse
You may be right. I waa using Intelliplug on Sensei. I should try using Sensei again and keep mpdecision enabled. Thats probably what Lollipop's "smootheness API's" were built for.
XERO_Racer said:
I'm running the latest Sensei and I've not even experienced any lags or stuttering, have you rebooted the phone and are you decrypted?
Click to expand...
Click to collapse
I am decrypted and rebooting had nothing to do with it. Are you using intelliplug or have you left it on mpdecision?
thair7391 said:
You may be right. I waa using Intelliplug on Sensei. I should try using Sensei again and keep mpdecision enabled. Thats probably what Lollipop's "smootheness API's" were built for.
I am decrypted and rebooting had nothing to do with it. Are you using intelliplug or have you left it on mpdecision?
Click to expand...
Click to collapse
reset up your phone, cpu speed and governor.scheduler. i always disable mpdecision, so i can run my cpu speed. if you dont disable mpdecision, then you can not set your cpu speed, as mpdecision will change it. no lagginess or choppiness here.
---------- Post added at 02:52 PM ---------- Previous post was at 02:51 PM ----------
thair7391 said:
You may be right. I waa using Intelliplug on Sensei. I should try using Sensei again and keep mpdecision enabled. Thats probably what Lollipop's "smootheness API's" were built for.
I am decrypted and rebooting had nothing to do with it. Are you using intelliplug or have you left it on mpdecision?
Click to expand...
Click to collapse
reset up your phone, cpu speed and governor.scheduler. i always disable mpdecision, so i can run my cpu speed. if you dont disable mpdecision, then you can not set your cpu speed, as mpdecision will change it. no lagginess or choppiness here. oh, and questions go into q&a, not general.
My Oneplus 3T is autoclosing apps that I am using while running, they are running in the background to give me timing and track my GPS, they are just randomly closed.
I have disabled Aggressive Doze and Auto-close high power apps but it is still happening. Is there anything I can do to prevent this?
Preau said:
My Oneplus 3T is autoclosing apps that I am using while running, they are running in the background to give me timing and track my GPS, they are just randomly closed.
I have disabled Aggressive Doze and Auto-close high power apps but it is still happening. Is there anything I can do to prevent this?
Click to expand...
Click to collapse
Yes, activate the lock (top right / multitasking screen) or flash a custom kernel (like: https://forum.xda-developers.com/on...ernel-franco-kernel-r1-28th-november-t3508904) which supports more background apps (limit raised to 60 from stock 32)
Fir3start3r said:
Yes, activate the lock (top right / multitasking screen) or flash a custom kernel (like: https://forum.xda-developers.com/on...ernel-franco-kernel-r1-28th-november-t3508904) which supports more background apps (limit raised to 60 from stock 32)
Click to expand...
Click to collapse
Thanks, I didn't know what the lock button was for. I'll try it next time I go running!
Fir3start3r said:
Yes, activate the lock (top right / multitasking screen)
Click to expand...
Click to collapse
Dumb queston: where is that setting? Can't seem to find it
JRSax said:
Dumb queston: where is that setting? Can't seem to find it
Click to expand...
Click to collapse
Sent from my OnePlus3T using XDA Labs
hello, does the lock solve the issue, could you please confirm ?
There are some hidden settings which might cause this
1. Apps - Setting - Apps auto-launch . Make sure it's turned off
2. Advanced - Recent app management - Make sure Normal clear is selected.
There is option in setting that close the application as soon you clear it from recent apps ....Setting/system UI/advanced
...Make sure it desabled.....Enjoy your device
I can't find any such setting. Which phone are you using now?
3T
---------- Post added at 12:27 PM ---------- Previous post was at 12:24 PM ----------
Naitik527 said:
3T
Click to expand...
Click to collapse
stacyy said:
I can't find any such setting. Which phone are you using now?
Click to expand...
Click to collapse
You have to start system UI tuner then you will be able to see this setting that's why
Preau said:
My Oneplus 3T is autoclosing apps that I am using while running, they are running in the background to give me timing and track my GPS, they are just randomly closed.
I have disabled Aggressive Doze and Auto-close high power apps but it is still happening. Is there anything I can do to prevent this?
Click to expand...
Click to collapse
How about battery optimization setting? apps > gear > special access > battery optimization > apps in Not optimized list?
Yeah, I know. There's Doze, Aggressive Doze, and this Battery Optimization.
I'm having the same issue. Tried Franco Kernel and it didn't help.
Fir3start3r said:
Yes, activate the lock (top right / multitasking screen) or flash a custom kernel (like: https://forum.xda-developers.com/on...ernel-franco-kernel-r1-28th-november-t3508904) which supports more background apps (limit raised to 60 from stock 32)
Click to expand...
Click to collapse
I have tried locking Pokemon Go and it seemed to be working until today when it was killed in the background and I had to reload.
I'm not sure if this is a PoGo issue or a OnePlus issue.
I have now turned off battery optimisations for PoGo to see how that goes.
jamesl1001 said:
I have tried locking Pokemon Go and it seemed to be working until today when it was killed in the background and I had to reload.
I'm not sure if this is a PoGo issue or a OnePlus issue.
I have now turned off battery optimisations for PoGo to see how that goes.
Click to expand...
Click to collapse
So far none of the solutions listed have worked for me. I have same problem with Pokemon Go, Lyft, and Uber. I'm on stock 7.0 not rooted. I tried the Beta 7.1.1 and no difference.
Sent from my ZTE A2017U using XDA-Developers Legacy app
I started my torrent download and i slept as it was downloading in background, but in the morning the download dissappear how to fix this
Same Problem
I'm also having the same problem with PoGo. I can't find this lock button.
I have the same issue with some apps, including PoGo and Firefox and probably Discord (chat application). I bought this device with 6 GB to have not these issues. I'm quite disappointed. The issue occured with Android 6, with what the device was shipped, and with the latest Android 7.1. Maybe it doesn't have 6 GB at all and they did cheat me?
The lock button on the task manager screen does just prevent apps to be swiped away in my opinion.
i have the same issue when playing with pokemon go. very annoying. especially when its connected to my pogo plus. never had an issue with my s7e.
glad i'm not the only one. NPR app closes by itself when I'm listening to it.. I've noticed flipboard closing while i'm using it as well.
Just use a custom kernel, stock one has a limit on 32 max apps open. Other than that the solutions are those given already (Lock icon, disable battery opt for that app, disable doze, etc.)
Sometimes cpu stuck at max, Already clean background apps. The only fix is restarting but then it happen again at random times. Latest Android 10 WW firmware. Phone gets hot and battery is quickly depleted..anybody have the same issue ?
What kernel and kernel settings? What cpu governor are you using for each cluster? What did you do to clean the background apps?
533y4 said:
What kernel and kernel settings? What cpu governor are you using for each cluster? What did you do to clean the background apps?
Click to expand...
Click to collapse
Thanks for replying. I'm running fully stock, locked bootloader. I clean background apps via battery saving menu. Still it happens randomly.
Make sure you didn't add an app to armory crate that running in background
shahram Ali said:
Make sure you didn't add an app to armory crate that running in background
Click to expand...
Click to collapse
Its all games in there
i have latest android 9 and sometimes i have this problem too , until y close all background apps it gets back to 826mhz. here is a video sample:
https://drive.google.com/file/d/13SyKLQ4Xs4_dYusF-Zglt72ysfh_VBqI/view?usp=drivesdk
in the video it gets downs to 1,29ghz but after stop screen recording it gets at 826mhz.
i suspect its facebook app.
Are you using Magisk Hide? Try disabling it and rebooting.