Related
Hello all,
I've rooted my P8Lite L21 using the custom recovery method, flashed the supersu.zip, then restored the original recovery.
Yesterday I had an OTA and now phone reboot once during system boot, and at the second time it hangs during boot.
What can I do to recover this? I have stock recovery, and when I try to VOLDOWN+POWER it never goes to fastboot. (last time I had to use adb reboot-bootloader but now I can't reach system\adb..)
Can you help?
Thanks, cheers,
pHk
Phk said:
Hello all,
I've rooted my P8Lite L21 using the custom recovery method, flashed the supersu.zip, then restored the original recovery.
Yesterday I had an OTA and now phone reboot once during system boot, and at the second time it hangs during boot.
What can I do to recover this? I have stock recovery, and when I try to VOLDOWN+POWER it never goes to fastboot. (last time I had to use adb reboot-bootloader but now I can't reach system\adb..)
Can you help?
Thanks, cheers,
pHk
Click to expand...
Click to collapse
Hello,
You can boot to fastboot with this method:
Connect phone with PC then power off
Now push two buttons VOLDOWN+POWER+MicroUSB now you can install any stock ROM with fastboot commands and suitable *.img(boot.img, cust.img, system.img)
P.S
What OTA(number) arrive to you?
sokkoban said:
You can boot to fastboot with this method:
Connect phone with PC then power off
Now push two buttons VOLDOWN+POWER
Click to expand...
Click to collapse
Worked like a charm Thanks a lot! I don't know the OTA number.. Still can't get into system :|
I'll try flashing TWRP from here and then i don't know which rom to use.. I'd like CM12 but i'm not sure its supported.
Can you suggest any stable ROM ?
Thanks
Phk said:
Worked like a charm Thanks a lot! I don't know the OTA number.. Still can't get into system :|
I'll try flashing TWRP from here and then i don't know which rom to use.. I'd like CM12 but i'm not sure its supported.
Can you suggest any stable ROM ?
Thanks
Click to expand...
Click to collapse
First you try to remember what is your last ROM number and your region. Or you can install the last beta on android 5.1.1(B010) need unlocked bootloader
Here all official firmware for device ALE-L21
http://huaweip8lite.blogspot.bg/2016/01/huawei-p8-lieale-l21-official-firmware.html
sokkoban said:
First you try to remember what is your last ROM number and your region. Or you can install the last beta on android 5.1.1(B010) need unlocked bootloader
Here all official firmware for device ALE-L21
http://huaweip8lite.blogspot.bg/2016/01/huawei-p8-lieale-l21-official-firmware.html
Click to expand...
Click to collapse
It's Portuguese\Europe, Single SIM.
I'm downloading "Huawei P8 Lite ALE-L21 V100R001C432B171 (Europe)". Is this flashable from fastboot? Yes, i'm unlocked. Does it need the hiSuite or fastboot.exe will suffice?
Thanks Sokkoban, you're being of great help and I'm thanking all your posts
Phk said:
It's Portuguese\Europe, Single SIM.
I'm downloading "Huawei P8 Lite ALE-L21 V100R001C432B171 (Europe)". Is this flashable from fastboot? Yes, i'm unlocked. Does it need the hiSuite or fastboot.exe will suffice?
Thanks Sokkoban, you're being of great help and I'm thanking all your posts
Click to expand...
Click to collapse
Wait my friend this is single sim ROM
I must download dual sim if you have dual sim device
Yes I'm not shure but if you want install B170 you need first downgrade to B052 then you can install via OTA best and last ROM for you country
sokkoban said:
Wait my friend this is single sim ROM
I must download dual sim if you have dual sim device
Yes I'm not shure but if you want install B170 you need first downgrade to B052 then you can install via OTA best and last ROM for you country
Click to expand...
Click to collapse
Yes, I know this is single SIM. But, why do you say that I need to downgrade to B052 and then OTA? Can't i flash the B170 directly?
The other question i had is, how to flash this. Hisuite or fastboot.exe?
Thanks
Phk said:
Yes, I know this is single SIM. But, why do you say that I need to downgrade to B052 and then OTA? Can't i flash the B170 directly?
The other question i had is, how to flash this. Hisuite or fastboot.exe?
Thanks
Click to expand...
Click to collapse
Because after downgrade you can install any firmware via OTA! (ROM B052 is from the box!)
I write guide how to unbrick ALE-L21 use google translator, download ROM and run file FLASH-ALL.bat http://huaweip8lite.blogspot.bg/2016/01/tutorialhow-to-unbrick-huawei-p8-lite.html
sokkoban said:
Because after downgrade you can install any firmware via OTA! (ROM B052 is from the box!)
I write guide how to unbrick ALE-L21 use google translator, download ROM and run file FLASH-ALL.bat http://huaweip8lite.blogspot.bg/2016/01/tutorialhow-to-unbrick-huawei-p8-lite.html
Click to expand...
Click to collapse
If you don't see any problem, I will try to flash B170 directly, since my bootloader is already unlocked. What do you think?
About the link you sent, the site appears in English, but then it changes to russian? I cannot get it back to EN.
Thanks
How to root samsung galaxy y2 smg130h?
halim4 said:
How to root samsung galaxy y2 smg130h?
Click to expand...
Click to collapse
This was actually funny. :good:
Phk said:
If you don't see any problem, I will try to flash B170 directly, since my bootloader is already unlocked. What do you think?
About the link you sent, the site appears in English, but then it changes to russian? I cannot get it back to EN.
Thanks
Click to expand...
Click to collapse
OK
Try this. Use Huawei update extractor in forum xda have link to it. Open the UPDATE.APP and extract the following files: Recovery.img, Boot.img, Cust.img, System.img
Then use fastboot commands to flash B171 ROM
I wish you success!
Regards
sokoban
Hi there,
I have a similar problem: bootloop!
I'm comming from B170 and installed 7 HD 1.2 ROM and got some errors, I thougt it would be an good to go the long way to B008 or better B010. After so searching I found: http://forum.xda-developers.com/showpost.php?p=64483642&postcount=43
- did not step 1 an under-pressed flashing recovery in step 2 and 3, thought I could yet use TWRP.
Obviously, that was the mistake.
At step 4 I recognized that I have to do step 1 to go on.
that worked an I copied the update.zip to internal card, initialised the update.
Not sure it got to 100% but think so.
Result bootloop, can't get to recovery, only fastboot
Tried to flash every thing: B052, B170, and 136a, even the boot.img and recovery.img of B010 and B008
no errors but still bootloop.
PLEASE HELP!!
is there a full version of B080 somewhere to flash by fastboot? or any options to flash the update.zip of B080 again?
All other proposals are welcome!
Rocketmaster said:
Hi there,
I have a similar problem: bootloop!
I'm comming from B170 and installed 7 HD 1.2 ROM and got some errors, I thougt it would be an good to go the long way to B008 or better B010. After so searching I found: http://forum.xda-developers.com/showpost.php?p=64483642&postcount=43
- did not step 1 an under-pressed flashing recovery in step 2 and 3, thought I could yet use TWRP.
Obviously, that was the mistake.
At step 4 I recognized that I have to do step 1 to go on.
that worked an I copied the update.zip to internal card, initialised the update.
Not sure it got to 100% but think so.
Result bootloop, can't get to recovery, only fastboot
Tried to flash every thing: B052, B170, and 136a, even the boot.img and recovery.img of B010 and B008
no errors but still bootloop.
PLEASE HELP!!
is there a full version of B080 somewhere to flash by fastboot? or any options to flash the update.zip of B080 again?
All other proposals are welcome!
Click to expand...
Click to collapse
First 7 HD 1.2 ROM work only over the B010!!!
Second in this archive have the instructions to install Beta B008 why you not did everything described in the instructions?
Third when install stock firmware RECOVERY must be original not TWRP!!!
Now you must install stok recovery, make hard reset then install B052
After that you can install every stock firmware for your region! or follow the instruction to install B008=>B010=>7 HD 1.2 ROM
Regards
sokkoban said:
First 7 HD 1.2 ROM work only over the B010!!!
Second in this archive have the instructions to install Beta B008 why you not did everything described in the instructions?
Third when install stock firmware RECOVERY must be original not TWRP!!!
Now you must install stok recovery, make hard reset then install B052
After that you can install every stock firmware for your region! or follow the instruction to install B008=>B010=>7 HD 1.2 ROM
Regards
Click to expand...
Click to collapse
I flashed Stock and restarted and flashed B052. What do you mean with hard reset? I not comming in any menu. Only fastboot works.
Still bootloop
Which method use you to flash B052?
sokkoban said:
Which method use you to flash B052?
Click to expand...
Click to collapse
fastboot
Hm, this is very strange!
What device do you have? and which region use?
adb reboot recovery --- says: error: device '(null)' not found
if I try with serialnumber
adb -s W3D7XXXXXXXX reboot recovery ---- says error: device 'W3D7XXXXXXXX' not found
but ---- fastboot devices ----says at the same time: W3D7XXXXXXXX
---------- Post added at 09:57 AM ---------- Previous post was at 09:54 AM ----------
ALE-L21 Germany
So B170 worked in the first place
Try this method and ROM
May be you must use google translator because tutorial is for Bulgarian people
http://huaweip8lite.blogspot.bg/2016/01/tutorialhow-to-unbrick-huawei-p8-lite.html
My device: PRA-LX1 (Dual SIM version)
Got bricked. I was installing Google APPS on EMUI (Dumb) and it just kept on looping and restarting.
I decided to try the rescue zip and when I successfully restore it, it boots back to TWRP after I reboot to system.
My recoverys: TWRP (installed on recovery2) and Stock EMUI Recovery (installed on recovery)
Bootloader: Unlocked
Fastboot: Command not allowed
Thanks in advance for your reply.
Hello, is the FRP status on fastboot mode LOCKED or UNLOCKED
if it's UNLOCKED then you can unbrick it using fastboot to flash boot.img system.img and do a full wipe of your data partition.
RAR1991 said:
Hello, is the FRP status on fastboot mode LOCKED or UNLOCKED
if it's UNLOCKED then you can unbrick it using fastboot to flash boot.img system.img and do a full wipe of your data partition.
Click to expand...
Click to collapse
I already booted, that's good news!
Now I've got a problem. The famous unbrick guide everyone uses - the firmware is buggy for me.
Fingerprint scanner doesn't work - camera doesn't work and audio doesn't work.
I think this is a problem with the firmware as they are more models of the PRA-LX1?
Btw, how do I find mine?
Thanks
My model is the Europe unlocked dual sim one
NetfariousIntent said:
I already booted, that's good news!
Now I've got a problem. The famous unbrick guide everyone uses - the firmware is buggy for me.
Fingerprint scanner doesn't work - camera doesn't work and audio doesn't work.
I think this is a problem with the firmware as they are more models of the PRA-LX1?
Btw, how do I find mine?
Thanks
My model is the Europe unlocked dual sim one
Click to expand...
Click to collapse
try to download the right version for your phone from firmware finder and flash it using fastboot
RAR1991 said:
try to download the right version for your phone from firmware finder and flash it using fastboot
Click to expand...
Click to collapse
Oh, I think I have picked the right version, now I get the Update.app, how can I flash it now?
I'm such a noob, thank you for your answer.
NetfariousIntent said:
Oh, I think I have picked the right version, now I get the Update.app, how can I flash it now?
I'm such a noob, thank you for your answer.
Click to expand...
Click to collapse
you have to use Huawei update extractor to extract system.img boot.img recovery and recovery2 then flash them with fastboot
PS: Make a backup before trying anything
https://forum.xda-developers.com/showthread.php?t=2433454
thank you
RAR1991 said:
you have to use Huawei update extractor to extract system.img boot.img recovery and recovery2 then flash them with fastboot
PS: Make a backup before trying anything
https://forum.xda-developers.com/showthread.php?t=2433454
Click to expand...
Click to collapse
Only system, boot, recovery and recovery2?
What about modem, vendor, etc...?
Thanks
NetfariousIntent said:
Only system, boot, recovery and recovery2?
What about modem, vendor, etc...?
Thanks
Click to expand...
Click to collapse
in all tutorials that's all what they mentioned and you can't flash vendor.img from fastboot I've tried that but it returns (Command not allowed) I'm trying to convert vendor.img to flashable TWRP backup using Imgtool but I can't figure out how it works yet
RAR1991 said:
in all tutorials that's all what they mentioned and you can't flash vendor.img from fastboot I've tried that but it returns (Command not allowed) I'm trying to convert vendor.img to flashable TWRP backup using Imgtool but I can't figure out how it works yet
Click to expand...
Click to collapse
Hi, I've tried to flash my firmware. Now It bootloops for a while and then restarts and bootloops agian.
I guess I'm very unlucky.
Thanks
NetfariousIntent said:
Hi, I've tried to flash my firmware. Now It bootloops for a while and then restarts and bootloops agian.
I guess I'm very unlucky.
Thanks
Click to expand...
Click to collapse
I'm experiencing the same thing right now with my PRA-LA1 and the only way that I found to make it works is to install a TWRP recovery and root it. But I have a lot of bugs after that I've already created a thread for that if someone can help
[Help] Bugs after rooting PRA-LA1
So, I tried to update my P10 (like an idiot) and obviously failed leaving me in a bootloop, I can access fastboot and recovery, but nothing else, I have an unlocked bootloader too, what can I do to solve this? My P10 is the VTR-L09C605B166 variant that I tried to update to the B210 version (Oreo) I just want a real fix I didn't try anything because of the fear of breaking my phone even more, and I don't know if a technician will help me because of my unlocked bootloader and the warnings that appear, please help, thanks in advance.
Are you able to install and boot twrp?
How did you try to update?
For twrp you can use my guide.
You can easily check if you're on Oreo by using fastboot command "fastboot flash recovery_ramdisk TWRP.IMG". If it shows a partition length error, you're still on nougat and need to install a nougat twrp with command "fastboot flash recovery TWRP.IMG".
When TWRP work you can proceed with my guide.
But I need to say: without any warranty.
Everything you do can cause a brick even if it should be safe.
Other solution is to try to relock your bootloader (you need your unlock code!) and try a factory reset or restore with eRecovery - this is the official way and works only if nothing is modified in the system.
BTW: B210 isn't Oreo, I think.
B36(X) are Oreo builds.. You must have downloaded some unreleased software :/
Jannomag said:
Are you able to install and boot twrp?
How did you try to update?
For twrp you can use my guide.
You can easily check if you're on Oreo by using fastboot command "fastboot flash recovery_ramdisk TWRP.IMG". If it shows a partition length error, you're still on nougat and need to install a nougat twrp with command "fastboot flash recovery TWRP.IMG".
When TWRP work you can proceed with my guide.
But I need to say: without any warranty.
Everything you do can cause a brick even if it should be safe.
Other solution is to try to relock your bootloader (you need your unlock code!) and try a factory reset or restore with eRecovery - this is the official way and works only if nothing is modified in the system.
BTW: B210 isn't Oreo, I think.
Click to expand...
Click to collapse
Ok I need help in this part, just installed twrp for nougat, but the version of my phone just shows the OTA update not a FULL OTA, what do I do? And I cant seem to find a Oreo update for my region (C605) does the region matter?
JamesRLS said:
B36(X) are Oreo builds.. You must have downloaded some unreleased software :/
Click to expand...
Click to collapse
Well, f*** and what BXXX are official nougat builds?
This should be the right Oreo version:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v113112/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...12/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...l/VTR-L09_hw_la/update_full_VTR-L09_hw_la.zip
It's VTR-L09C605B321 FullOTA-PV.
Can you enter in eREcovery?
CriticalImpact said:
Well, f*** and what BXXX are official nougat builds?
Click to expand...
Click to collapse
The official oreo builds are B365,363,360
CatalinMAW said:
Can you enter in eREcovery?
Click to expand...
Click to collapse
Yup
Jannomag said:
This should be the right Oreo version:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v113112/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...12/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...l/VTR-L09_hw_la/update_full_VTR-L09_hw_la.zip
It's VTR-L09C605B321 FullOTA-PV.
Click to expand...
Click to collapse
Holy! You're awesome! Im gonna try to unbrick the phone now, I hope it works, either way thanks! really.
Jannomag said:
Are you able to install and boot twrp?
How did you try to update?
For twrp you can use my guide.
You can easily check if you're on Oreo by using fastboot command "fastboot flash recovery_ramdisk TWRP.IMG". If it shows a partition length error, you're still on nougat and need to install a nougat twrp with command "fastboot flash recovery TWRP.IMG".
When TWRP work you can proceed with my guide.
But I need to say: without any warranty.
Everything you do can cause a brick even if it should be safe.
Other solution is to try to relock your bootloader (you need your unlock code!) and try a factory reset or restore with eRecovery - this is the official way and works only if nothing is modified in the system.
BTW: B210 isn't Oreo, I think.
Click to expand...
Click to collapse
It worked!!! Youre just awesome, I really owe you one, thanks, for real <3
Jannomag said:
Are you able to install and boot twrp?
How did you try to update?
For twrp you can use my guide.
You can easily check if you're on Oreo by using fastboot command "fastboot flash recovery_ramdisk TWRP.IMG". If it shows a partition length error, you're still on nougat and need to install a nougat twrp with command "fastboot flash recovery TWRP.IMG".
When TWRP work you can proceed with my guide.
But I need to say: without any warranty.
Everything you do can cause a brick even if it should be safe.
Other solution is to try to relock your bootloader (you need your unlock code!) and try a factory reset or restore with eRecovery - this is the official way and works only if nothing is modified in the system.
BTW: B210 isn't Oreo, I think.
Click to expand...
Click to collapse
Hello, I am in the same situation as the guy above: I can access fastboot and recovery and my phone is unlocked - I have Nougat VKY-L09C432B185...
Can I follow your guide with a Nougat phone?
Thank you
P.S.
I tried to install update.zip via TWRP but I got the "Error 9" error
Roter_Freiherr said:
Hello, I am in the same situation as the guy above: I can access fastboot and recovery and my phone is unlocked - I have Nougat VKY-L09C432B185...
Can I follow your guide with a Nougat phone?
Thank you
P.S.
I tried to install update.zip via TWRP but I got the "Error 9" error
Click to expand...
Click to collapse
You can try it. The recovery within my archives is from VKY, so it should work. The devices are kinda similar. Just download the right firmware for your model (VKY) and region (Cxxx, like C432), and also FullOTA.
It can be possible that my script doesn't work with your phones partitions. If so, please post the TWRP output, then I'm able to rewrite the script for you.
You can do it by yourself if you know the partitions for recovery and recovery on you device.
Hi. I can't access recovery. Phone is completely off. I connect to USB and computer recognizes de phone USB SER. I hard bricked. It happened after I upgraded to oreo version. It shut off and it never turned on again. I tried power +vol. Can't get aceess to recovery just black screen. I appreciate if you can help. Thank you
I really messed up when trying to root my phone.
I think i accidently flashed an incorrect boot.img to my phone.
Now I can't get it to boot anymore.
After this I now can't even let my XZ3 boot into twrp recovery also.
Everytime I do a fastboot boot twrp.img i get this:
FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
Click to expand...
Click to collapse
So i'm stuck and don't know how to boot it.
any ideas?
r3v0 said:
I really messed up when trying to root my phone.
I think i accidently flashed an incorrect boot.img to my phone.
Now I can't get it to boot anymore.
After this I now can't even let my XZ3 boot into twrp recovery also.
Everytime I do a fastboot boot twrp.img i get this:
So i'm stuck and don't know how to boot it.
any ideas?
Click to expand...
Click to collapse
Did you apply the vbmeta parameters?
Did you tried magisk 19.x? (19 may generate bootloops, I recommend my bundled 18.1)
You can always get the stock boot.img from the boot.sin in the stock firmware (April, the may twrp is not published).
Just unsin.exe the file (unsin.exe from XDA).
MartinX3 said:
Did you apply the vbmeta parameters?
Did you tried magisk 19.x? (19 may generate bootloops, I recommend my bundled 18.1)
You can always get the stock boot.img from the boot.sin in the stock firmware (April, the may twrp is not published).
Just unsin.exe the file (unsin.exe from XDA).
Click to expand...
Click to collapse
Where can I find the latest stock firmware?
I've been searching for it for hours now.
The unsin.exe I found already
r3v0 said:
Where can I find the latest stock firmware?
I've been searching for it for hours now.
The unsin.exe I found already
Click to expand...
Click to collapse
The latest (without twrp support, because I shared the first build on telegram for testing) is downloadable via Emma.
You could also use xperifirm and newflasher from XDA
In xperifirm you can choose the region, hopefully one region has still the April firmware.
PS: I see notifications for new posts or answers easily in my big threads, but it gets difficulty for the different device sections on XDA (in the app).
MartinX3 said:
The latest (without twrp support, because I shared the first build on telegram for testing) is downloadable via Emma.
You could also use xperifirm and newflasher from XDA
In xperifirm you can choose the region, hopefully one region has still the April firmware.
Click to expand...
Click to collapse
xperifirm I can use. But Emma won't recognize the phone obviously as it doesn't boot.
You mentioned the april release. Is that necessary?
r3v0 said:
xperifirm I can use. But Emma won't recognize the phone obviously as it doesn't boot.
You mentioned the april release. Is that necessary?
Click to expand...
Click to collapse
Just if you want to install twrp on your phone.
The April twrp may "fastboot boot twrp.img" with broken decryption but an installation would only lead into a not working twrp.
MartinX3 said:
Just if you want to install twrp on your phone.
The April twrp may "fastboot boot twrp.img" with broken decryption but an installation would only lead into a not working twrp.
Click to expand...
Click to collapse
At this moment all I want is to be able to boot it again.
But everytime I try to fastboot a boot.img to the phone I get:
FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
r3v0 said:
At this moment all I want is to be able to boot it again.
But everytime I try to fastboot a boot.img to the phone I get:
FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
Click to expand...
Click to collapse
Do you use the newest fastboot version?
And the xz3 twrp?
Execute
fastboot -v
Please
MartinX3 said:
Do you use the newest fastboot version?
And the xz3 twrp?
Execute
fastboot -v
Please
Click to expand...
Click to collapse
I use this version:
fastboot version 28.0.3-5475833
And I have the latest xz3 twrp
r3v0 said:
I use this version:
fastboot version 28.0.3-5475833
And I have the latest xz3 twrp
Click to expand...
Click to collapse
Oh. Maybe 28.0.2 or 28.0.1 are working better?
Did you boot the stock firmware without any modification once first?
Edit:
Interesting
28.0.3 must be so new that even google didn't publish a changelog.
MartinX3 said:
Oh. Maybe 28.0.2 or 28.0.1 are working better?
Did you boot the stock firmware without any modification once first?
Click to expand...
Click to collapse
When I got the phone I booted it.
After that I managed to unlock the bootloader.
Then I tried to root it.
And that's when I think I fastbooted the wrong boot.img.
r3v0 said:
When I got the phone I booted it.
After that I managed to unlock the bootloader.
Then I tried to root it.
And that's when I think I fastbooted the wrong boot.img.
Click to expand...
Click to collapse
Maybe yes.
I never saw this message. Hmmm.
At least one xz3 user I know from is happy with the twrp.
Weird, very weird.
I whish I could reproduce it.
MartinX3 said:
Maybe yes.
I never saw this message. Hmmm.
At least one xz3 user I know from is happy with the twrp.
Weird, very weird.
I whish I could reproduce it.
Click to expand...
Click to collapse
TWRP worked until I messed up the boot.
When I now try to fastboot flash boot boot.img I get this:
FAILED (remote: 'Error flashing partition : Volume Full')
I managed to get it to boot to twrp. I guess at some time I set-active it to b. Setting it back to a solved the not booting twrp.
Now I used the vbmeta.img from twrp to set vbmeta.
Gonna try rooting it again now.
OS not booting yet.
r3v0 said:
I managed to get it to boot to twrp. I guess at some time I set-active it to b. Setting it back to a solved the not booting twrp.
Now I used the vbmeta.img from twrp to set vbmeta.
Gonna try rooting it again now.
OS not booting yet.
Click to expand...
Click to collapse
I recommand flashing the entire firmware via newflasher.
Remove the userdata.sin so you don't wipe your phone.
MartinX3 said:
I recommand flashing the entire firmware via newflasher.
Remove the userdata.sin so you don't wipe your phone.
Click to expand...
Click to collapse
So, I just found out You're the developer of what I downloaded.
Can I flash this one:
H9436_Customized CE1_1316-3759_52.0.A.3.84_R9B.tar.gz
through newflasher?
r3v0 said:
So, I just found out You're the developer of what I downloaded.
Can I flash this one:
H9436_Customized CE1_1316-3759_52.0.A.3.84_R9B.tar.gz
through newflasher?
Click to expand...
Click to collapse
Muahahahaha [emoji14]
You mean my old uploaded firmware?
That's just the last version before Sony changed the DRM
Better you use the 52.0.A.8.25 , it is the April stock firmware and compatible with the newest twrp so far.
I hope it is still available through xperifirm.
Ok, thanks so far. You pointed me in the right direction. Hopefully I get my Xz3 running again. ??
r3v0 said:
Ok, thanks so far. You pointed me in the right direction. Hopefully I get my Xz3 running again. [emoji1303]
Click to expand...
Click to collapse
I'm optimistic, that you'll achieved success.
MartinX3 said:
I'm optimistic, that you'll achieved success.
Click to expand...
Click to collapse
In the end.
Now i'm struggling with an error with newflasher.
No usb device with vid:0x0fce pid:0xb00b
Click to expand...
Click to collapse
Oh yeah, I'm on linux. So I'll have to do all my windows stuff through a VM
Similar to the previous threads for OnePlus 5, OnePlus 5T or OnePlus 6, here are the necessary packages to unbrick/revive a hard bricked OnePlus 7 Pro.
The following hardware revisions are supported:
GM1910: China
GM1911: India
GM1913: Europe
GM1917: Global/US Unlocked
Download: https://www.androidfilehost.com/?w=files&flid=294744
guacamole_21_H.04_190416_unlocked.zip
After using it, the phone will be restored to HydrogenOS aka Chinese firmware.
Click to expand...
Click to collapse
guacamole_21_E.08_190515_unlocked.rar
After using it, the phone will be restored to OxygenOS 9.5.4.GM21BA aka European firmware.
Click to expand...
Click to collapse
guacamole_21_O.07_190512_unlocked.zip
After using it, the phone will be restored to OxygenOS 9.5.3.GM21AA aka global firmware.
Click to expand...
Click to collapse
In every case, it is possible to upgrade to latest OxygenOS by using full signed zip from this thread via Local Upgrade.
With the device powered off, hold Volume Up & Volume Down buttons to force it to boot to Qualcomm download mode.
Use the most updated signed driver (2.1.2.2 at this moment) to avoid potential issues..
For detailed procedures, please consult the linked threads above. There is no reason to repeat the same thing again.
Make sure the path of the extracted files doesn't contain any non-English character. The tool isn't unicode aware.
Source:
HydrogenOS package: 人艱不拆 (OnePlus China forum thread), @trollavin & @Some_Random_Username for the help in mirroring
OxygenOS (EU) package: @MrVoshel
OxygenOS (global) package: @Lucifer6
Reserved for future.
Thank you for this!!
Doesn't this leave you with a Chinese modem (limited LTE bands and roaming configs?) and critical partitions? Wouldn't an international or European tool be more suitable considering that Oxygen zips may not overwrite everything? Or is this just a temporary guide with what we have?
LLStarks said:
Doesn't this leave you with a Chinese modem (limited LTE bands and roaming configs?) and critical partitions? Wouldn't an international or European tool be more suitable considering that Oxygen zips may not overwrite everything? Or is this just a temporary guide with what we have?
Click to expand...
Click to collapse
Temp? yes and no, I would say. Better than warranty R&D in days no phone for use.
As far as you can revive the phone from QDL9008 back to HOS/OOS, you now have a chance Again to switch over whatever ROM or OS you want later on.
jkyoho said:
Temp? yes and no, I would say. Better than warranty R&D in days no phone for use.
As far as you can revive the phone from QDL9008 back to HOS/OOS, you now have a chance Again to switch over whatever ROM or OS you want later on.
Click to expand...
Click to collapse
Well, that's the perfect explanation.
:highfive:
Can you turn TMobile to int'l with this ?
HtcOnekid said:
Can you turn TMobile to int'l with this ?
Click to expand...
Click to collapse
What he said
When i start MsmdownloadtoolV4.0.exe it says :
Packet image not exist!
Take out the Chinese characters in the file name and then try
joemossjr said:
Take out the Chinese characters in the file name and then try
Click to expand...
Click to collapse
Yep that's i though, but i finaly looking for EU version. Because i think with OTA upgrade to GMBA EU modem will not contain the good modem right ?
---------- Post added at 12:59 AM ---------- Previous post was at 12:27 AM ----------
failed to install on EU model : param preprocessing and stop at 5 ou 7 sec before flashing. I tryed using anothere patched tool and not working :s
Please help me, I failed pretty hard and bricked my phone.
I rooted my phone with stock recovery using a patched magisk boot image and all went fine.
Today, I deviced to temporarily boot into twrp to check it out, so I booted into fastboot and used "fastboot boot twrp.img"
and booted into system. I was confused and rebooted but now I was stuck in stock recovery. So I completely flashed TWRP
on boot_a and boot_b and into TWRP I rooted my device. But even now I am always bootlooping into TWRP and can't
get my phone to boot into system.
I tried using the unbrick tool but my device won't show up on my computer, even with the driver installed.
I'm screwed, can someone help?
Can I somehow reflash the stock recovery and revert back to my patched boot image?
uniQ191 said:
Please help me, I failed pretty hard and bricked my phone.
I rooted my phone with stock recovery using a patched magisk boot image and all went fine.
Today, I deviced to temporarily boot into twrp to check it out, so I booted into fastboot and used "fastboot boot twrp.img"
and booted into system. I was confused and rebooted but now I was stuck in stock recovery. So I completely flashed TWRP
on boot_a and boot_b and into TWRP I rooted my device. But even now I am always bootlooping into TWRP and can't
get my phone to boot into system.
I tried using the unbrick tool but my device won't show up on my computer, even with the driver installed.
I'm screwed, can someone help?
Can I somehow reflash the stock recovery and revert back to my patched boot image?
Click to expand...
Click to collapse
what is your device OOS 9.5.3/4/5/6 ?
flash the co-responding stock boot.img from twrp with magisk zip together, and see if you can boot
uniQ191 said:
Please help me, I failed pretty hard and bricked my phone.
I rooted my phone with stock recovery using a patched magisk boot image and all went fine.
Today, I deviced to temporarily boot into twrp to check it out, so I booted into fastboot and used "fastboot boot twrp.img"
and booted into system. I was confused and rebooted but now I was stuck in stock recovery. So I completely flashed TWRP
on boot_a and boot_b and into TWRP I rooted my device. But even now I am always bootlooping into TWRP and can't
get my phone to boot into system.
I tried using the unbrick tool but my device won't show up on my computer, even with the driver installed.
I'm screwed, can someone help?
Can I somehow reflash the stock recovery and revert back to my patched boot image?
Click to expand...
Click to collapse
You havn't bricked your phone, just put it in fastboot mode and reupload boot image to the correct slot !
Regards,
thebigtross said:
You havn't bricked your phone, just put it in fastboot mode and reupload boot image to the correct slot !
Regards,
Click to expand...
Click to collapse
Thanks for your replies! I was on OOS 9.5.5 and I tried flashing the twrp/magisk zips but that didn't work either. I also tried applying the stock boot.img to the active slot, but still got the recovery bootloop.
So as my last hope, I wiped all data in recovery mode, rebooted to fastboot and sideloaded the complete stock image from here https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
I reconfigured my phone from scratch, rooted with the patched boot image like before and everythings works now. Guess I will not bother with TWRP any time soon.
Added global and EU packages.
Titokhan said:
Added global and EU packages.
Click to expand...
Click to collapse
Will global work for 1911 (India)
Mr.Crucial said:
Will global work for 1911 (India)
Click to expand...
Click to collapse
Yes, the packages are interchangable.
[/COLOR]
Titokhan said:
Yes, the packages are interchangable.
Click to expand...
Click to collapse
But I think that these packages will not work on T-mobile 1915!
When I reboot into edl mode, it recognizes the "Qualcomm HS-USB QDLoader 9008", but then 10 seconds later, the phone automatically boots the the battery display, which disables edl. The same this happens whether I use the vol up+down and plug in, or `adb reboot edl`.
Edit: "How I learned to stop worrying and risk a brick"
Selecting the right COM and hitting start in MSMtool in that 10 second window kept it in edl mode for the duration of the flash.