Related
Alright, so before I get flamed, I have searched for over an hour today, and I have not been able to figure this out. I am not new to android, rooting, custom roms, and editing files, so I have tried a multitude of different things.
To the point, my Droid 3 will not connect to my computer. It did a couple weeks ago when I flashed the Liberty Rom onto it, but now it'll just charge and not go into the USB mode. The only reason I know it is charging is when I disconnect the cord it says the disconnected message.
I have tried a couple different cables, and I usually use my stock cable that came with my D3. I have also tried restarting my phone and computer. I even flashed the newest Liberty Rom the hard way and still no luck.
If someone could please help me out I would be VERY grateful as this is a PITA!!!
Thanks in advance!
My two cents would be, try different usb port and make sure you have the most current moto drivers.
Have had luck with uninstalling driver pack and reinstalling.
Hope that helps.
Sent from my DROID3 using XDA App
I appreciate the help, unfortunately uninstalling the drivers didn't work, unless I didn't get the correct drivers? I went into uninstall programs. In the device manager nothing came up for my phone or drivers. And I have also tried different ports but to no luck. Thanks again for the reply.
Have you tried a different computer? A different device? Let's just rule out that this isn't a computer issue first...
My Zune works in all of my ports, and my other computer. My Phone however does not. It does the same thing as my other computer, although I guess I don't have the drivers on the other computer, but it would still come up as usb connection right? All this does is charge, sometimes.
Have you tried Linux? No drivers are needed. download a live CD and see if it helps.
eww245 said:
Have you tried Linux? No drivers are needed. download a live CD and see if it helps.
Click to expand...
Click to collapse
Can you explain?
("Very Important"!) PLEASE POST!!!
After sufferring through the same issue and delving deeply for almost two days,I have found the culprit!!! IT IS THE USB CORD AND NOT THE DRIVERS OR ANYTHING ELSE!!"SIMPLY USE THE FIRST USB CORD THAT YOU USED THE VERY FIRST TIME YOU PLUGED INTO YOUR COMPUTOR AND THAT WILL RECTIFY(FIX) YOUR PROBLEM.(IT HAS TO BE THE VERY FIRST USB CORD OTHERWISE YOU WILL CONTINUE TO HAVE THIS PROBLEM UNTIL AND NO OTHER COMPUTOR WILL RECOGNIZE YOUR DEVICE UNTIL YOU DO WHAT I SAY.I thought it was the rooting of my phone that initially caused the issue or maybe an app,however,I found the culprit.The usb cord!!!(WHATEVER USB YOU USED FOR THE VERY FIRST ,STOCK OR NOT,IT IS THE ONLY ONE YOUR COMPUTOR WILL RECOGNIZE!!! I HOPE THIS HELPS THE MANY OF YOU THAT ARE HAVING THIS SAME ISSUE AND GOOD LUCK
Sent From My Droid 3 using TapaTalk
xFreak-a-Zoidx said:
RECTIFY(FIX)
Click to expand...
Click to collapse
Thanks for clearing that up for me, I haven't competed the fourth grade.
Dude could've just said use the USB cord that came with the phone, to each his own. I have 6 micro usb cables and only the moto official will allow me to do anything other than charge the phone via cpu.
Sent from my DROID3 using XDA App
The only problem is that I ONLY use the cord that came with my D3... Any way to flash the stock rom onto my phone from my phone and unroot? Then I can take my phone into verizon and get a new one... and a new cord..
ajgates92 said:
The only problem is that I ONLY use the cord that came with my D3... Any way to flash the stock rom onto my phone from my phone and unroot? Then I can take my phone into verizon and get a new one... and a new cord..
Click to expand...
Click to collapse
That sucks. You can find the .890 sbf floating around in android development and flash it, I believe it takes everything to stock including unroot.
Sent from my DROID3 using XDA App
I looked in the thread posted, but the link to the flashable zip is down. So i'm stuck at a standstill right now.
This link works fine: http://dev-host.org/t6y98oinbk1f/Droid_3_SBF_5.6.890.zip
blmetzger said:
This link works fine: http://dev-host.org/t6y98oinbk1f/Droid_3_SBF_5.6.890.zip
Click to expand...
Click to collapse
Can I flash that wit cwm or the stock recovery though? I can't use RSD or fastboot because nothing happens when I plug my usb into it.
Hello!,
I got my phone into a weird situation, every time I try to connect to my PC, it's saying "Phone is in USB host mode", the PC tries to recognizes and nothing happens, after that the phone won't charge and stays like that until I rebooted, I can charge it with the original charger after this.
My device:
HTC One AT&T 32GB
ROM: ARHD 41.0
I also tried this method with no results: http://forum.xda-developers.com/showthread.php?t=2481211
Anyone with this situation too?
lumogox said:
Hello!,
I got my phone into a weird situation, every time I try to connect to my PC, it's saying "Phone is in USB host mode", the PC tries to recognizes and nothing happens, after that the phone won't charge and stays like that until I rebooted, I can charge it with the original charger after this.
My device:
HTC One AT&T 32GB
ROM: ARHD 41.0
I also tried this method with no results: http://forum.xda-developers.com/showthread.php?t=2481211
Anyone with this situation too?
Click to expand...
Click to collapse
You mean it's showing up as QHSUSB_DLOAD in Device Manager?
Unfortunately that would indicate a hard brick, no fix, as far as I am aware of.
Welcome to the group of unfortunate people.
I guess the best option would be to send it back for warranty repairs, mine is the same and I'm 99.99% sure it has to do with the charging port.
Unfortunately for me I'm out of the US so warranty shipping is not an option at the moment.
There are other threads about this problem, but so far the only ones I heard that solved this problem was by repair or replace.
You mean it's showing up as QHSUSB_DLOAD in Device Manager?
Unfortunately that would indicate a hard brick, no fix, as far as I am aware of.
Click to expand...
Click to collapse
No, it's not bricked it works ok but only charges through wall charger and if you plug it up to a pc it gets into "USB Host Mode" and then you have to reboot to be able to charge from the wall charger.
My HTC showed the same message. Saying it can not charge into host mode.
HTC only charges powered off.
ferincr said:
Welcome to the group of unfortunate people.
I guess the best option would be to send it back for warranty repairs, mine is the same and I'm 99.99% sure it has to do with the charging port.
Unfortunately for me I'm out of the US so warranty shipping is not an option at the moment.
There are other threads about this problem, but so far the only ones I heard that solved this problem was by repair or replace.
No, it's not bricked it works ok but only charges through wall charger and if you plug it up to a pc it gets into "USB Host Mode" and then you have to reboot to be able to charge from the wall charger.
Click to expand...
Click to collapse
Indeed man, same situation here, I'm actually in Colombia, so not an option to send it, as I can't go back to factory settings without connecting it to the PC.
@nkk71 The device is fully functional, it's just not getting detected on my pc.
lumogox said:
Indeed man, same situation here, I'm actually in Colombia, so not an option to send it, as I can't go back to factory settings without connecting it to the PC.
@nkk71 The device is fully functional, it's just not getting detected on my pc.
Click to expand...
Click to collapse
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.
nkk71 said:
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.
Click to expand...
Click to collapse
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.
nkk71 said:
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.
Click to expand...
Click to collapse
lumogox said:
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.
Click to expand...
Click to collapse
Steps 8-15 of my guide show how to set up adb/fastboot in Ubuntu 32bit and to check if your device is recognized. You don't have to install Ubuntu just select to try it. I think that's what scares everyone off, is thinking they have to install the OS...It seems like a lot of work but it really isn't and compared to what you've gone through, it can't hurt....good luck
lumogox said:
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.
Click to expand...
Click to collapse
Win 7 and XP are pretty much OK with any drivers & hboot & firmware/rom, but what is it exactly showing you when you say "USB Host Mode"?
Have you considered uninstalling everything with HTC.... in control panel, and installing newer version: http://forum.xda-developers.com/showthread.php?t=2089508
then see if you get MTP (Media Transfer Protocol) working again.
USB Host Mode (as in Qualcomm High Speed USB Download Mode) is NOT a good sign! it's a brick about to happen.
maybe try changing the cable you are using to your PC!!!
EDIT: and make sure you're phone's USB port is not dirty or similar
nkk71 said:
Win 7 and XP are pretty much OK with any drivers & hboot & firmware/rom, but what is it exactly showing you when you say "USB Host Mode"?
Have you considered uninstalling everything with HTC.... in control panel, and installing newer version: http://forum.xda-developers.com/showthread.php?t=2089508
then see if you get MTP (Media Transfer Protocol) working again.
USB Host Mode (as in Qualcomm High Speed USB Download Mode) is NOT a good sign! it's a brick about to happen.
maybe try changing the cable you are using to your PC!!!
EDIT: and make sure you're phone's USB port is not dirty or similar
Click to expand...
Click to collapse
1. "Phone is in USB mode" appears as a notification on the phone when plugged to the computer.
2. Installed 3 different ROMs with the same result, uninstall everything, and nothing.
3. Don't know how to get back MTP.
4. Brick??
5. I try to charge it, but same thing happens.
6. Clean the port, and nothing.
lumogox said:
1. "Phone is in USB mode" appears as a notification on the phone when plugged to the computer.
2. Installed 3 different ROMs with the same result, uninstall everything, and nothing.
3. Don't know how to get back MTP.
4. Brick??
5. I try to charge it, but same thing happens.
6. Clean the port, and nothing.
Click to expand...
Click to collapse
let's take this down a notch, we dont care what your phone says, we care what shows up in Windows 7 Device Manager (or XP, maybe even Win8):
for example
I really haven't explored what steps are needed to get it back to stock, but mine connects to the pc as long as it's in bootloader so I can flash stuff like Fw but nothing that need to get into the sd card. (as far as I know).
nkk71 said:
let's take this down a notch, we dont care what your phone says, we care what shows up in Windows 7 Device Manager (or XP, maybe even Win8):
for example
Click to expand...
Click to collapse
Well, it's says nothing... doesn't appear anymore on Win 7 devices.
Try cleaning your USB ports?
Sent from my HTC One using Tapatalk
n1234d said:
Try cleaning your USB ports?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I'm thinking this a port issue, is damage somehow, however, I hope to find a software solution.
New Firmware
Phone that was purchased was not recognized by my computer in recovery and was locked with no S-Off and did not have a Super CID, but assuming that you have all of those things already and are developing these issues then I would try updating the firmware. For some reason, after flashing the 5.11.1540.9 firmware from http://forum.xda-developers.com/showthread.php?t=2485651 and updating to ARHD 71.1 the charging issue all has seemed to disappear. If anyone wants the full run down of how I got from my original non-functioning and unrecognized phone to where it is now I can put in details, but as far as I can tell the issue is just with the firmware if you find yourself being able to intermittently charge in different scenarios when it is off.
Loading New Firmware
Also, for some reason, computer would not recognize phone with TWRP recovery yet I could push files through adb when using CWM recovery. So what happened for me was loading up CWM and pushing the files that I needed into the data folder and flashing TWRP to then install it or rebooting the phone as normal and finding the file with something like a root file explorer. I feel like I may not be very clear with this so post if there needs to be more clarification.
it's a strange issue ,i think it is a hardware problem,happen to me and i try everything possible,without success,than i charge phone when power of and it was the only way ,but led was flashing so it was intermittent charging,i was able to charge only to 97%..i use my phone and somehow next day i was able to charge phone,but then problem occur again...and wired thing is that fastboot devices list is not empty but adb devices list is empty,so phone is not fully recognized by computer,and i forgot to say that day when i was able to charge phone,adb command worked...that day i flashed firmware recovery and rom again ,because i thought it will resolve the problem...
---------- Post added at 11:35 PM ---------- Previous post was at 11:23 PM ----------
ricehoshi said:
Phone that was purchased was not recognized by my computer in recovery and was locked with no S-Off and did not have a Super CID, but assuming that you have all of those things already and are developing these issues then I would try updating the firmware. For some reason, after flashing the 5.11.1540.9 firmware from http://forum.xda-developers.com/showthread.php?t=2485651 and updating to ARHD 71.1 the charging issue all has seemed to disappear. If anyone wants the full run down of how I got from my original non-functioning and unrecognized phone to where it is now I can put in details, but as far as I can tell the issue is just with the firmware if you find yourself being able to intermittently charge in different scenarios when it is off.
Click to expand...
Click to collapse
And do have same problem again after flashing new firmware?
The phone was a gift for my dad and it has been running fine since my last post. No charging issues and the phone does not go into host mode randomly anymore.
Well i also had the same problem...but i did factory reset on the phone and flashed it to completly stock ...and since then no problem..
Sent from my HTC One using XDA Free mobile app
My nexus 6 is rooted. 10 days back it stopped charging from my turbo charger. I accidentally wiped everything including the OS and the internal storage from TWRP mode. Now when I am connecting the device to my laptop it is saying usb not recognized( device descriptor request failed). I have tried everything to solve this. I have updated all drivers and tried out in different devices with different usb cables but all in vain. I also tried to mount otg in TWRP mode but I can't check the mount usb otg box in recovery mode. Please help me out.
amlanbaruah555 said:
My nexus 6 is rooted. 10 days back it stopped charging from my turbo charger. I accidentally wiped everything......
Click to expand...
Click to collapse
Start with wireless charging; there must be some energy in the N6 to communicate with other devices. And clean the USB connector with a small brush wetted with isopropanol or alcohol.
If what @NLBeev recommends doesn't work, you may have no choice but to flash a stock ROM image using ADB. So long as you left your bootloader unlocked, flashing a stock image should restore your device to a running state.
Guys my device is charging from other chargers so there is no problem in charging it. To use adb sideload my device needs to be recognised by my pc but it doesn't. How do I sideload my device then?
Did you install the USB driver Google provides?
Yeah i have installed all the drivers.
amlanbaruah555 said:
Yeah i have installed all the drivers.
Click to expand...
Click to collapse
Cable OK? Try a different one.
USB-port OK? Use a different PC.
When using Windows 10 and having driver issues; uninstall and delete the drivers from the PC and let Windows 10 search the internet for updated drivers.
NLBeev said:
Cable OK? Try a different one.
USB-port OK? Use a different PC.
When using Windows 10 and having driver issues; uninstall and delete the drivers from the PC and let Windows 10 search the internet for updated drivers.
Click to expand...
Click to collapse
I have tried everything but nothing is working. Is there any other way?
Not that I can think of. You may have a bad USB port on the device, which means a trip to the nearest repair center.
amlanbaruah555 said:
I have tried everything but nothing is working. Is there any other way?
Click to expand...
Click to collapse
Have you cleaned the USB port?
Yes I have cleaned it. I even went to the service centre once and they said that your mofherboard needs to be changed. But my motherboard is fine.
How do you know your motherboard is fine? Clearly your motherboard isn't fine if the USB port isn't working.
Strephon Alkhalikoi said:
How do you know your motherboard is fine? Clearly your motherboard isn't fine if the USB port isn't working.
Click to expand...
Click to collapse
Yeah maybe. So do I need to change my motherboard then? How much will it cost?
You would need to replace the motherboard, but I don't know how much they cost. Sorry.
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
mykrov said:
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
Click to expand...
Click to collapse
I have not seen any other reports of usb dying after OtA update. You say you tried with different PC, what about using different usb cable?
But more bad news for your plans. If you have official v21 update, then you are not rootable anyway.
mrmazak said:
I have not seen any other reports of usb dying after OtA update. You say you tried with different PC, what about using different usb cable?
But more bad news for your plans. If you have official v21 update, then you are not rootable anyway.
Click to expand...
Click to collapse
I tried with diferents usb cables, and nothing happened.
mykrov said:
I tried with diferents usb cables, and nothing happened.
Click to expand...
Click to collapse
Do you know if any of them are sync cables??
codyalan said:
Do you know if any of them are sync cables??
Click to expand...
Click to collapse
They are USB cables that i use on others phones (lg 4x HD and Honor 6X) and work fine with those phones but not on my R1Hd
mykrov said:
Hi, firts of all sorry for my english.
My sister give to me a BLU R1 HD 2GB RAM/16 ROM, it come without Amazon ads (so i think its OEM version). Its running BLU_R001UU_V21_GENERIC.
She told me that one day just not was recognized by PC to transfer files,photos, music. I make a wipe from recovery and still the problem no USB detection at all just charging, no sounds like new USB device was conected, no device on Device Manager.( i do this on diferents PC Windows 10, Windows 8, and Linux Elementary OS , Deeping OS)
I enable Developer Options and change MTP/PTP/Only Charge option and nothing happened; I opened the device to check the pins on the USB connector and check continuity and all seem like be perfect.
I thing that may be when was update to the last software something happen and lost USB recoginition, I want to Root the device and change Recovery but i see that the steps need connect the R1 HD to PC and make some things throw ADB console.
My question is: can i downgrade the original rom from SDcard in the actual Recovery.. to try recover the USB functions. or may be its something wrong on any internal chip that no make the USB conection.
Ty.
Click to expand...
Click to collapse
I have the exact same issue... and it happened just after an OTA Update. After that it showed it was charging only when the phone was shut down.
No USB recognition whatsoever. PC/Mac. Tried several cables.... All USB modes... Factory Reset... Nothing made it work.
I contacted BLU with the issue. As soon as I have an answer (If ever) I will let you know.
If any of you know anything about this please share it here.
Oddly enough, After a cache wipe and factory reset, I have no ads on the lock screen. The app is running on the background but nothing shows up.
elcarmi said:
I have the exact same issue... and it happened just after an OTA Update. After that it showed it was charging only when the phone was shut down.
No USB recognition whatsoever. PC/Mac. Tried several cables.... All USB modes... Factory Reset... Nothing made it work.
I contacted BLU with the issue. As soon as I have an answer (If ever) I will let you know.
If any of you know anything about this please share it here.
Oddly enough, After a cache wipe and factory reset, I have no ads on the lock screen. The app is running on the background but nothing shows up.
Click to expand...
Click to collapse
I think if we can downgrade to a official rom under the actual recovery maybe that fix the USB. But all methods are under USB connection to PC.
mykrov said:
I think if we can downgrade to a official rom under the actual recovery maybe that fix the USB. But all methods are under USB connection to PC.
Click to expand...
Click to collapse
As far as I know downgrading is not possible without making the phone unusable. If by any chance that is possible maybe an update from an SD Card can work.
Hey all, I'm trying to unlock my Chinese 11 ultra, without luck so far. It worked in the past, but I was impatient to wait for the unlock timer to end, so I left it with the factory rom. However, now I need Android Auto, and unsurprisingly, that built-in app seems to be excluded from the Chinese rom, so I have no choice but to unlock and flash the global/eu rom. I dl'ed the latest Mi Unlock tool (the official one ofc) and it just doesn't seem to detect the phone when it's in Fastboot mode. I mean, screw the tool, Windows just doesn't make that detection ping, so definitely something wrong with the drivers. I tried to install them through the tool, but it doesn't seem to work. Expectedly, I can connect the phone under normal boot, without installing anything (MTP mode, etc' seems to work fine). Ideas?
adi518 said:
Hey all, I'm trying to unlock my Chinese 11 ultra, without luck so far. It worked in the past, but I was impatient to wait for the unlock timer to end, so I left it with the factory rom. However, now I need Android Auto, and unsurprisingly, that built-in app seems to be excluded from the Chinese rom, so I have no choice but to unlock and flash the global/eu rom. I dl'ed the latest Mi Unlock tool (the official one ofc) and it just doesn't seem to detect the phone when it's in Fastboot mode. I mean, screw the tool, Windows just doesn't make that detection ping, so definitely something wrong with the drivers. I tried to install them through the tool, but it doesn't seem to work. Expectedly, I can connect the phone under normal boot, without installing anything (MTP mode, etc' seems to work fine). Ideas?
Click to expand...
Click to collapse
I had that problem too. Your USB cable must be original xiaomi. Try different USB ports on your PC. Install different drivers.
You were right on time. I reached a dead end, where the cable seems the last thing to check. I was using a good Baseus cable, but it didn't work. I changed to an original Xiaomi cable I got with my 67W charger. Works like a charm. FFS.
adi518 said:
You were right on time. I reached a dead end, where the cable seems the last thing to check. I was using a good Baseus cable, but it didn't work. I changed to an original Xiaomi cable I got with my 67W charger. Works like a charm. FFS.
Click to expand...
Click to collapse
I got the same problem: 1st I was not using the original cable, then I had to try a different USB port. You're welcome