Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about doing this to your device
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Description: keystore and gatekeeper implementation from Oreo (A605FNXXU3ARK2). Fixes broken Lock-screen (including fingerprints), Full-disk encryption, Samsung account log-in. Should work with stock (rooted) Android 9 One UI and any GSI. Modifies vendor and data partition.
Installation: flash SM-A605-keymaster-fix-by-Not_Sure.zip on previously rooted Galaxy A6+ (any Snapdragon 450 variant) using TWRP.
someone was testing
Hi, Did anyone test that ?
Works great 100% I've tested in my rooted A605f. I've been searching for so long. Thank u very much. ???
Works this with a normal a6
elokuba said:
someone was testing
Click to expand...
Click to collapse
FuTChY said:
Hi, Did anyone test that ?
Click to expand...
Click to collapse
Yes, I personally did and few members in telegram group.
Janderhacker said:
Works this with a normal a6
Click to expand...
Click to collapse
This one won't work with Exynos A6. But i believe something similar can be done provided that it didn't have no such issue with Android 8.
on a605fn is not working or i am doing something wrong
Berinjo said:
on a605fn is not working or i am doing something wrong
Click to expand...
Click to collapse
Please provide your firmware version / region code.
Also did you notice any errors when flashing or it just doesn't work?
no errors through twrp but after flashing i have constant bootloop and device is encrypted again.firmware is A605FNXXU4BSJ1.
Berinjo said:
no errors through twrp but after flashing i have constant bootloop and device is encrypted again.firmware is A605FNXXU4BSJ1.
Click to expand...
Click to collapse
It's shouldn't get encrypted after you flash "A605_oreo_forced_encryption_disabler".
Are you rooting it just now? If so please follow the guide, EVERY step is necessary, even the ones for "oreo".
https://forum.xda-developers.com/galaxy-a6/development/recovery-twrp-3-2-3-1-galaxy-a6-a605-t3868598
I don't think it can cause bootloop.
Also after rooting your device may not boot from first try.
Ok, i flashed firmware throug odin, then i flashed twrp, after format data and reboot, i have flashed rmm, force encryyption bypass and then magisk and your fix. Now i have a bootloop.
Poslano sa mog SM-A605FN koristeći Tapatalk
---------- Post added at 03:02 PM ---------- Previous post was at 02:53 PM ----------
Btw, in what way it is working? After flashing i can set up pin lock and fingerprint or it is just bypass for broken pin and fingerprint?
Poslano sa mog SM-A605FN koristeći Tapatalk
Berinjo said:
Ok, i flashed firmware throug odin, then i flashed twrp, after format data and reboot, i have flashed rmm, force encryyption bypass and then magisk and your fix. Now i have a bootloop.
Poslano sa mog SM-A605FN koristeći Tapatalk
---------- Post added at 03:02 PM ---------- Previous post was at 02:53 PM ----------
Btw, in what way it is working? After flashing i can set up pin lock and fingerprint or it is just bypass for broken pin and fingerprint?
Poslano sa mog SM-A605FN koristeći Tapatalk
Click to expand...
Click to collapse
Try without flashing fix right after rooting. Boot into it without the fix one time. I never tested it the way you're doing it.
It's not bypass. Lockscreen and fingerprint should work.
Safe folder and password autofill with fingerprint won't work.
Not work. On a605fn boot,loop.
elokuba said:
Not work. On a605fn boot,loop.
Click to expand...
Click to collapse
Rooting causes boot problems by itself. It might bootloop few times or even stuck requiring forced reboot.
Please try the patch after you successfully booted into rooted system once.
If it breaks boot after that i will need logs to help. At least get /sys/fs/pstore/console-ramoops from recovery (get it right away or it will be overridden). Also that logs might include information such as serial numbers, IMEIs, mac-addresses. So you might not wanna put it with public access.
Hi , thanks for the Mod.
I have a question: Should this fix be installed after rooting the A605F with the traditional way for Pie which is done by installing:
forced_encryption_disabler,
RMM State Bypass
no-verity-opt-encrypt.
Then your fix?
Thanks in advance.
FuTChY said:
Hi , thanks for the Mod.
I have a question: Should this fix be installed after rooting the A605F with the traditional way for Pie which is done by installing:
forced_encryption_disabler,
RMM State Bypass
no-verity-opt-encrypt.
Then your fix?
Thanks in advance.
Click to expand...
Click to collapse
Try install oreo forced encryption disabler. It worked for my a605f.
hi
thanks for the mod but it didn't worked for me even when install force encryption disabler before the fix it just shows verfication failed screen ,i had tried to install rmm state bypass and no-verity-opt-encrypt zip before the fix and also that didn't worked
please guys help me if u can:crying:
my device : A605F
os: android pie
Security agent message how delate this
Is it possible to provide a fix for the A6 as well? Please, I beg you :/
sudolicious said:
Is it possible to provide a fix for the A6 as well? Please, I beg you :/
Click to expand...
Click to collapse
Maybe. Did you had the issue before pie?
Related
Hi
I think the Directory-Structure is different in the latest FW!
When i try to flasha Custom Keyboard like the one from Sony Xperia Z3 it doesnt appear in settings!
But on older FW it does!
Have anybody a plan where i must extract manually the zip from Custom Keyboards?
TWRP goes up to B130? So you might unzip it then install apk manually. About TWRP, I never tried in B151, but B130 I have. I am tired about "Your device is not trustworthy"-ish message every time I boot it up, so I just re-lock my device... Have you tried Settings - Apps - Menu (at the bottom of the screen) - Show system processes? Any flashed apps goes as System app, I think.
Anybody else have the issue that Xposed framework stopped working for this firmware?
The zip file flashes fine without returning any errors but it still says framework not installed in the app.
Tried with several versions of Xposed.
Before the update it worked fine...
Schlengge said:
Anybody else have the issue that Xposed framework stopped working for this firmware?
The zip file flashes fine without returning any errors but it still says framework not installed in the app.
Tried with several versions of Xposed.
Before the update it worked fine...
Click to expand...
Click to collapse
on my end it worked... tried just only android n-ify with google assistant...b151 L21
snapdesign said:
on my end it worked... tried just only android n-ify with google assistant...b151 L21
Click to expand...
Click to collapse
Which version did you use?
Schlengge said:
Which version did you use?
Click to expand...
Click to collapse
xposed-v86.1-sdk23-arm64-custom-build-by-wanam-20160904.zip
snapdesign said:
xposed-v86.1-sdk23-arm64-custom-build-by-wanam-20160904.zip
Click to expand...
Click to collapse
Really strange... That is the one I also flashed...
But does not seem to work...
However, I have a L31 with B150. I also cannot activate the DT2Wake function on my device.
Somehow I think I have an overly restricted kernel in my device
But as soon as we have CM I'll say goodbye to EMUI anyway...
Sorry but it's the first time I update EMUI on my P9 Lite so I'd like to ask... If I update it, what will I lose? Root and bootloader? Or only Xposed won't work anymore?
Shady Cent said:
Sorry but it's the first time I update EMUI on my P9 Lite so I'd like to ask... If I update it, what will I lose? Root and bootloader? Or only Xposed won't work anymore?
Click to expand...
Click to collapse
You'll lose busybox,root and xposed, in my end i have just reinstalled them without problems.
Loruski053 said:
You'll lose busybox,root and xposed, in my end i have just reinstalled them without problems.
Click to expand...
Click to collapse
What about bootloader and TWRP Recovery?
Shady Cent said:
What about bootloader and TWRP Recovery?
Click to expand...
Click to collapse
If you install it via twrp bootloader won't be relocked, if via dload bootloader will be locked, twrp will be lost in both ways.
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Shady Cent said:
What about bootloader and TWRP Recovery?
Click to expand...
Click to collapse
Twrp will be lost eventually, bootloader will be locked only if you install via dload (the standard installation provided by Huawei)
Schlengge said:
Really strange... That is the one I also flashed...
But does not seem to work...
However, I have a L31 with B150. I also cannot activate the DT2Wake function on my device.
Somehow I think I have an overly restricted kernel in my device
But as soon as we have CM I'll say goodbye to EMUI anyway...
Click to expand...
Click to collapse
I forgot to say that i got an error too... something about not the right version arm vs arm64... something is different in build prop, can really put my finger on it...i tried with an older build prop and then it worked...
What's the impact of updating to latest official stock ? any known issues ?
Hi does can anyone give to me correct files for root my N950F on Android Pie stable...
Just need correct twrp and magisk...please
Poslano z mojega SM-N950F z uporabo Tapatalk
blinkt88 said:
Hi does can anyone give to me correct files for root my N950F on Android Pie stable...
Just need correct twrp and magisk...please
Poslano z mojega SM-N950F z uporabo Tapatalk
Click to expand...
Click to collapse
I'm looking for this too. Just flashed Official Pie, now looking for TWRP.
Hopefully TeamExy will have his custom ROM up today sometime.
---------- Post added at 04:25 PM ---------- Previous post was at 04:04 PM ----------
Tried to flash TWRP here https://forum.xda-developers.com/newreply.php?do=newreply&p=78727616
But it didnt work.
Do we need to wait for a TWRP for Pie?
Havent there been ROMs based on the Pie BETAs? Maybe i did something wrong
vinokirk said:
I'm looking for this too. Just flashed Official Pie, now looking for TWRP.
Hopefully TeamExy will have his custom ROM up today sometime.
---------- Post added at 04:25 PM ---------- Previous post was at 04:04 PM ----------
Tried to flash TWRP here https://forum.xda-developers.com/newreply.php?do=newreply&p=78727616
But it didnt work.
Do we need to wait for a TWRP for Pie?
Havent there been ROMs based on the Pie BETAs? Maybe i did something wrong
Click to expand...
Click to collapse
I solved it...
If you have N950F Duos like me its pretty easy to root on Android Pie
Just download latest TWRP 3.2.1.0 or newest and put TAR file in Odin make sure you have OEM enabled in developer options...after that flash TWRP but after phone goes black you need press VOL+ Bixby and Power or just Vol+ and Bixby you need be fast....when you in TWRP swipe to allow modifications...than go and flash Magisk 18.1 latest ZIP....you need it have on SDCARD before start anything...if you got any error like "cant mount data" you need go first to WIPE and there wipe data its ask to type YES this format your phone and delete internal storage....
Magisk work fine no problems and twrp to. Good luck.
If you need help tell me
Poslano z mojega SM-N950F z uporabo Tapatalk
KNOX
Does knox start counting on this method?
petrusrpenha said:
Does knox start counting on this method?
Click to expand...
Click to collapse
Yes once you install twrp/ root you'll trip Knox for good!(No going back! )
KNOX
BluePhnx said:
Yes once you install twrp/ root you'll trip Knox for good!(No going back! )
Click to expand...
Click to collapse
and the secure folder keeps running by stumbling on knox?
What stops running when you stumble into knox?
petrusrpenha said:
and the secure folder keeps running by stumbling on knox?
What stops running when you stumble into knox?
Click to expand...
Click to collapse
You'll lose secure folder, Samsung pay, any Knox apps.
Samsung health as well but there is fix for it. It's a simple build.prop edit.
Samsung pay only work around is you got to HAVE galaxy watch(what I've read is a MUST!)
KNOX
BluePhnx said:
You'll lose secure folder, Samsung pay, any Knox apps.
Samsung health as well but there is fix for it. It's a simple build.prop edit.
Samsung pay only work around is you got to HAVE galaxy watch(what I've read is a MUST!)
Click to expand...
Click to collapse
my note 8 is with android 9 and whenever I try to run twrp.img by odin the binary error. any solution to this?
I know here should not be the place for this but I have another question you can not activate dual speaker mode without root?
petrusrpenha said:
my note 8 is with android 9 and whenever I try to run twrp.img by odin the binary error. any solution to this?
I know here should not be the place for this but I have another question you can not activate dual speaker mode without root?
Click to expand...
Click to collapse
1. You'll need the latest tar file not the img file for Odin.
2. You'll need twrp recovery. Root don't know.
blinkt88 said:
I solved it...
If you have N950F Duos like me its pretty easy to root on Android Pie
Just download latest TWRP 3.2.1.0 or newest and put TAR file in Odin make sure you have OEM enabled in developer options...after that flash TWRP but after phone goes black you need press VOL+ Bixby and Power or just Vol+ and Bixby you need be fast....when you in TWRP swipe to allow modifications...than go and flash Magisk 18.1 latest ZIP....you need it have on SDCARD before start anything...if you got any error like "cant mount data" you need go first to WIPE and there wipe data its ask to type YES this format your phone and delete internal storage....
Magisk work fine no problems and twrp to. Good luck.
If you need help tell me
Poslano z mojega SM-N950F z uporabo Tapatalk
Click to expand...
Click to collapse
Can you please send us a link to the files for download? TIA
drumbeater79 said:
Can you please send us a link to the files for download? TIA
Click to expand...
Click to collapse
All files what you need is already here on XDA just download latest TWRP 3.2.3.0 and Odin 3.12.1 and latest magisk version 18.1(18100)
All procedure how root is the same as for Oreo
First put Magisk zip on sdcard
Than flash TWRP with Odin
After flashing boot into TWRP swipe to allow modification and flash Magisk...if you get error like "cant mount data" you need go to wipe and there wipe data but this wipe internal storage.
Thats all
Poslano z mojega SM-N950F z uporabo Tapatalk
BluePhnx said:
You'll lose secure folder, Samsung pay, any Knox apps.
Samsung health as well but there is fix for it. It's a simple build.prop edit.
Samsung pay only work around is you got to HAVE galaxy watch(what I've read is a MUST!)
Click to expand...
Click to collapse
Hello,
I have tried in all possible ways to install samsung pay with Gear s3, having knox to 0x1.
Could you tell me the way you did it?
Thank you.
NeoKbm said:
Hello,
I have tried in all possible ways to install samsung pay with Gear s3, having knox to 0x1.
Could you tell me the way you did it?
Thank you.
Click to expand...
Click to collapse
I haven't done it myself but here is the link:
https://forum.xda-developers.com/galaxy-note-8/how-to/samsung-pay-root-gear-3-update-update-t3686307
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Oh you must have a Samsung Gear watch that supports Samsung pay.
BluePhnx said:
I haven't done it myself but here is the link:
https://forum.xda-developers.com/galaxy-note-8/how-to/samsung-pay-root-gear-3-update-update-t3686307
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Oh you must have a Samsung Gear watch that supports Samsung pay.
Click to expand...
Click to collapse
I'll try. If it works, I owe you a coffee (I'll pay with my watch )
petrusrpenha said:
my note 8 is with android 9 and whenever I try to run twrp.img by odin the binary error. any solution to this?
I know here should not be the place for this but I have another question you can not activate dual speaker mode without root?
Click to expand...
Click to collapse
Hi
I have the same problem that binary error gives me.
I already wait 2 weeks for the state to be removed: Prenormal and it still continues that I can do.
regards
Enviado desde mi SM-N950F mediante Tapatalk
What about encryption?
Is it possible to root the "note 8 pie" without loosing encryption?
If you have to wipe your data because of install TWRP and magisk, is it possible to encrypt the phone again with TWRP installed?
Thanks for information.....
Robert7x said:
Is it possible to root the "note 8 pie" without loosing encryption?
If you have to wipe your data because of install TWRP and magisk, is it possible to encrypt the phone again with TWRP installed?
Thanks for information.....
Click to expand...
Click to collapse
It's been a while since i last used TWRP. But, the removal.of encryption is needed.in order to access system partition and make modifications. You can re-encrypt using TWRP, But every time you access the recovery, you will need to enter the decrypt key.
BluePhnx said:
You'll lose secure folder, Samsung pay, any Knox apps.
Samsung health as well but there is fix for it. It's a simple build.prop edit.
Samsung pay only work around is you got to HAVE galaxy watch(what I've read is a MUST!)
Click to expand...
Click to collapse
Abt samsung pay, my note 8 was rooted, do u mean that if i have samsung galaxy watch with my note 8, then my samsung pay could be come back to be function again? How?
OK, another try....
Is there anyone who has rootet a "Original Pie Rom Note8 SM-N950F" successfully without loosing encryption?
I don't really need to have TWRP installed on my device, i just only want to root my phone in original state and get encryption back.....
Is it possible and who was successfull?
boytempp said:
Abt samsung pay, my note 8 was rooted, do u mean that if i have samsung galaxy watch with my note 8, then my samsung pay could be come back to be function again? How?
Click to expand...
Click to collapse
BluePhnx said:
I haven't done it myself but here is the link:
https://forum.xda-developers.com/galaxy-note-8/how-to/samsung-pay-root-gear-3-update-update-t3686307
---------- Post added at 06:38 PM ---------- Previous post was at 06:37 PM ----------
Oh you must have a Samsung Gear watch that supports Samsung pay.
Click to expand...
Click to collapse
You'll have to have the watch and use the watch to pay for stuff.
Check the link.
Official ASUS Android 10 AOSP Beta version
==================================
This beta version is only for WW SKU device that with Android 9 OS version.
Device: Asus Zenfone Max Pro M1 (ZB601KL/ZB602K)
Released: 30/01/2020
Version: 17.2017.1911.407
Build Status: Beta
Sources:
- https://www.asus.com/zentalk/in/thread-300440-1-1.html
- https://www.asus.com/zentalk/in/thread-300801-1-1.html
- https://www.asus.com/in/Phone/ZenFone-Max-Pro-ZB601KL/HelpDesk_BIOS/
Don't flash this ROM, it can damage the unique partitions from the manufacturer!!!
Known Issues:
* Electronic Image Stabilization(EIS) for video recording function has no effect.
* An unexpected password message occurs while upgrading to Android 10. - https://www.asus.com/support/FAQ/1042350
* There are two hardware versions of the fingerprint, Goodix and Cdfinger. Beta ROM only supports Goodix.
* Firmware 17.2017.1911.407 does not support fingerprint.
* Widevine certification has become L3 instead L1. Pernament corrupted widevine certification DRM keys.
* Low bass when using headphones.
* Lowered screen brightness drastically. Maybe 20-30% compared to Pie.
* Other reported issues - https://piunikaweb.com/wp-content/u...r-Android-10-update-on-ZenFone-Max-Pro-M1.jpg ( Source: https://piunikaweb.com/2020/02/01/asus-zenfone-max-pro-m1-android-10-beta-update-bugs/ )
Improve Items:
* Android 10 upgrade.
* Please be aware that installing this system image on a device removes all personal data from the device, so please remember to back up your data first.
* This is the Android 10 AOSP Beta version, so the user experience will be different from Android 9. If you are used to and prefer using Android 9, we recommend that you continue with the Android 9 version.
* Update Google security patch
Downloads:
* Official Android 10 Beta Full Rom - https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZB601KL/UL-ASUS_X00T-WW-17.2017.1911.407-user.zip
* Official Asus Flash Tool (AFT)/Fastboot Android 10 Beta Full Rom - ...not available
* Official Downgrade Image from Android 10 Beta to:
---- WW-16.2017.1912.060 (Android 9 Pie) - https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZB601KL/UL-ASUS_X00T-WW-16.2017.1912.060.999-user.zip
---- WW-16.2017.1910.059 (Android 9 Pie) - https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZB601KL/UL-ASUS_X00T-WW-16.2017.1901.13.999-user.zip
* TWRP Flashable Android 10 Beta Full Rom - https://sourceforge.net/projects/x0...e/Twrp-ASUS_X00T-WW-17.2017.1911.407-user.zip
* Firmware 17.2017.1911.407 Only - https://sourceforge.net/projects/x00tdports/files/Stockfirmware/Firmware-17.2017.1911.407.zip
Wow thanks
Just a little warning...
just now, I encountered the 'To Start Android, Enter your password' after updating to this firmware but I using pattern lock for my phone
I ended up wiping my internal storage thou... Since there's no other way to solve it
NekoDB said:
Just a little warning...
just now, I encountered the 'To Start Android, Enter your password' after updating to this firmware but I using pattern lock for my phone
I ended up wiping my internal storage thou... Since there's no other way to solve it
Click to expand...
Click to collapse
Did you not set a pin or password before setting a pattern? Or did you forget? Because I'm worried that the pin it's requesting is NOT the pin I have set on my device.
mine and many people did not have the fingerprint sensor after the update
pvtaru said:
Did you not set a pin or password before setting a pattern? Or did you forget? Because I'm worried that the pin it's requesting is NOT the pin I have set on my device.
Click to expand...
Click to collapse
Hmm? I setup fingerprint + pattern when using the phone for the first time and it didn't ask for backup PIN or password...
Since it specifically ask for password to unlock which I don't have or even set, I can't unlock it and need to do factory reset. Since the phone has encryption enabled, putting 'default_password' didn't work thou...
dougluna said:
mine and many people did not have the fingerprint sensor after the update
Click to expand...
Click to collapse
Mine is working btw, except it take a sec before it detect and unlock
I encountered the 'To Start Android, Enter your password' after updating to this firmware its bug before the update I have a password set it is not working after 10 updates I need factory reset device
then start working
Audio quality is trash yo. No bass. No eq, it's completely bland on my headphones. Can anyone else can verify this?
Still beta so I don't think I'll update for now
Pdatir said:
I encountered the 'To Start Android, Enter your password' after updating to this firmware its bug before the update I have a password set it is not working after 10 updates I need factory reset device
then start working
Click to expand...
Click to collapse
Read the instruction on Asus website,it says clean flash and you did dirty flash.
Dont mislead.please!
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
NekoDB said:
Just a little warning...
just now, I encountered the 'To Start Android, Enter your password' after updating to this firmware but I using pattern lock for my phone
I ended up wiping my internal storage thou... Since there's no other way to solve it
Click to expand...
Click to collapse
pvtaru said:
Did you not set a pin or password before setting a pattern? Or did you forget? Because I'm worried that the pin it's requesting is NOT the pin I have set on my device.
Click to expand...
Click to collapse
NekoDB said:
Hmm? I setup fingerprint + pattern when using the phone for the first time and it didn't ask for backup PIN or password...
Since it specifically ask for password to unlock which I don't have or even set, I can't unlock it and need to do factory reset. Since the phone has encryption enabled, putting 'default_password' didn't work thou...
Mine is working btw, except it take a sec before it detect and unlock
Click to expand...
Click to collapse
Pdatir said:
I encountered the 'To Start Android, Enter your password' after updating to this firmware its bug before the update I have a password set it is not working after 10 updates I need factory reset device
then start working
Click to expand...
Click to collapse
https://www.asus.com/support/FAQ/1042350
renda-l said:
Android 10 Released (30/01/2020)
==========================
Source:
- https://www.asus.com/zentalk/in/thread-300440-1-1.html
- https://www.asus.com/zentalk/in/thread-300801-1-1.html
* Official Android 10 Full Rom - https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZB601KL/UL-ASUS_X00T-WW-17.2017.1911.407-user.zip
* TWRP Flashable Full Rom - https://sourceforge.net/projects/x0...e/Twrp-ASUS_X00T-WW-17.2017.1911.407-user.zip
* Firmware Only - https://sourceforge.net/projects/x00tdports/files/Stockfirmware/Firmware-17.2017.1911.407.zip
Click to expand...
Click to collapse
ASUS just announced that this version WW-17.2017.1911.407 Android 10 update is in BETA, so BETTER STAY AWAY FROM IT or WAIT for the STABLE version if you want a peaceful life with your phone :silly:
Hearing about a lot of issues. Will update when a stable build is out.
Go ahead be a Guinea Pig for the rest of us..
But back-up your data first Before you Update..
Better yet, Back-up your Data First, then Do a Factory Reset, THEN Download & Install the Update..
Be Safe & Good luck!
How to install full OTA package ??? Plzzz help me...
0iAditya said:
Read the instruction on Asus website,it says clean flash and you did dirty flash.
Dont mislead.please!
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
https://www.asus.com/support/FAQ/1042350
Click to expand...
Click to collapse
Although Asus has offered the above explanation, it is still not the best practice as per industry standard. If a non-tech individual with locked BL is upgrading via official OTA, he shouldn't face the issue of wiping data to start his phone. Worse, there is no warning that this will happen when the user tries to update via OTA.
Although if it's Beta then the above guidelines do not apply.
Asus has just released a DOWNGRADE to pie file on their site. It is suggested to wait for a stable release of android 10.
Link: https://www.asus.com/in/Phone/ZenFone-Max-Pro-ZB601KL/HelpDesk_BIOS/
I've done factory reset and my all data is formatted.
Can anyone know how to recover my data with software
praveensingh569 said:
I've done factory reset and my all data is formatted.
Can anyone know how to recover my data with software
Click to expand...
Click to collapse
I think you can't unless you did back-up before you updated.
I installed the Full OTA package with TWRP and it worked well. Android 10 is so good.
how do you predict the time when official stable update be released?
Levi3DMG said:
Audio quality is trash yo. No bass. No eq, it's completely bland on my headphones. Can anyone else can verify this?
Click to expand...
Click to collapse
yup bro same issue , Looks like we are using 10 rupees earphone
Is it possible to root s9 on android 10 just like android pie with twrp fully working? If yes, then please reply...
Yes, I'm on android 10 rooted and twrp
danlivesey said:
Yes, I'm on android 10 rooted and twrp
Click to expand...
Click to collapse
how to?
How did you made it?
Nothing different as with Android P,
1. boot unlocked
2. installed twrp with odin.
3.Instantly restart in twrp after installing.
4. install magisk
works normal
Hi,
i cannot get my phone to reboot once twrp is installed.
Got any clue?
Thanks
Is there any procedure that properly roots Android 10 stable without leading to an infinite bootloop?
I am able to root but biometric stopped working.
Not sure how to fix that
---------- Post added at 08:26 PM ---------- Previous post was at 08:03 PM ----------
I am able to root but biometric stopped working.
Not sure how to fix that
Could you describe the process you followed for rooting?
g-gett said:
Hi,
i cannot get my phone to reboot once twrp is installed.
Got any clue?
Thanks
Click to expand...
Click to collapse
What device do you own?
it's a G960F
---------- Post added at 08:36 AM ---------- Previous post was at 08:24 AM ----------
TheMadScientist said:
What device do you own?
Click to expand...
Click to collapse
it's a G960F
Right, install twrp through odin, make sure you boot straight into twrp from download mode. Then wipe date and reboot recovery not the system. Then flash the multi disable zip from the download link. Then flash magisk and reboot. All done
https://drive.google.com/file/d/1TBp5hIrzIljYvOquI1H9L78YFtskxMDn/view?usp=drivesdk
So what if I already have twrp on my android 9 ,but now I wanna flash android 10
You got me there bud, My advice would to try a dirty flash to android 10 with Odin, but chances are you may need to flash twrp again not to sure.
Thanks, so what would I need to install twrp on my android 10(s9)
Just follow the instructions above with the link you need to flash that file after you flash twrp to stop the boot loop. Obviously you need Odin to flash twrp
Hi there does this work also for Andriod 10 latest UI2 on S9 ? Looking to root my S9 as well . Got it yesterday updated to the latest software . Tried to use it without root but too many apps that I use depends on it . Thanks
I have a Samsung G960f Singapore country, I want to use the Indonesian firmware base, can I do this?
febriasava said:
I have a Samsung G960f Singapore country, I want to use the Indonesian firmware base, can I do this?
Click to expand...
Click to collapse
You can do this as long as Indian firmware also labels as G960F. I am on Philippines and I'm using firmware from United Arab Emirates.
kyooohei08 said:
You can do this as long as Indian firmware also labels as G960F. I am on Philippines and I'm using firmware from United Arab Emirates.
Click to expand...
Click to collapse
must use g960f? or can it be g960fd or g960u or other?
Hi folks,
What we used as beta ROM is now published as official stable release known as version RMX1991_11.C.12 for Chinese model of Realme X2.
Probably anyone can upgrade the phone now in any possible way.
The bad news is FP stops working as soon as you patch vbmeta for disabling AVB...
The good news is that there's no verification of system partition. You can leave vbmeta untouched and modify whatever you want except boot.
yakovpol said:
The good news is that there's no verification of system partition. You can leave vbmeta untouched and modify whatever you want except boot.
Click to expand...
Click to collapse
Then, you will not loose fingerprint?
AlAneed said:
Then, you will not loose fingerprint?
Click to expand...
Click to collapse
Exactly
yakovpol said:
Exactly
Click to expand...
Click to collapse
Magisk can be installed and we still have the fingerprint working?
AlAneed said:
Magisk can be installed and we still have the fingerprint working?
Click to expand...
Click to collapse
No, Magisk is patching boot, which will require you to disable verification by means of vbmeta. You can try system-based methods like one of SuperSU.
yakovpol said:
No, Magisk is patching boot, which will require you to disable verification by means of vbmeta. You can try system-based methods like one of SuperSU.
Click to expand...
Click to collapse
but in order to fix twrp replace issue vbmeta verification is needed to be disabled right??
I will try to search for it. Is it just a normal app to install from Play store? or requires other method?
One more thing, TWRP working with it or no?
Thanks
---------- Post added 10th April 2020 at 12:36 AM ---------- Previous post was 9th April 2020 at 11:38 PM ----------
I guess I am not able to understand how to do root? I searched for system base root in the web with no luck
Would you mind explaining how to do root without Magisk?
osamanazim said:
but in order to fix twrp replace issue vbmeta verification is needed to be disabled right??
Click to expand...
Click to collapse
No. At least a few last CN ROM versions are insensitive to recovery replacement. You can keep stock vbmeta and flash custom recovery. But recovery will be replaced when you boot system, i.e. you flash custom recovery for single and immediate use
yakovpol said:
No. At least a few last CN ROM versions are insensitive to recovery replacement. You can keep stock vbmeta and flash custom recovery. But recovery will be replaced when you boot system, i.e. you flash custom recovery for single and immediate use
Click to expand...
Click to collapse
Will i lose any file if i update from color os 6.1 to realme ui or i need to backup first?
Mikelsteven said:
Will i lose any file if i update from color os 6.1 to realme ui or i need to backup first?
Click to expand...
Click to collapse
Backup is a nice thing. I would always insist on creating backup.
I successfully switched onto realmeUI without losing data. As I understand, you have to do it from A.17 (for CN device). My path was A.16 -> C.02, but now many are suggested to upgrade from A.17 straight to C.12.
yakovpol said:
Backup is a nice thing. I would always insist on creating backup.
I successfully switched onto realmeUI without losing data. As I understand, you have to do it from A.17 (for CN device). My path was A.16 -> C.02, but now many are suggested to upgrade from A.17 straight to C.12.
Click to expand...
Click to collapse
Thanks man. I don't know what reliable backup method i can use on an unrooted phone. I'm on A17 so i guess it's safe to upgrade without backup. Again, have u experienced any bug so far on realme ui?
Mikelsteven said:
Thanks man. I don't know what reliable backup method i can use on an unrooted phone. I'm on A17 so i guess it's safe to upgrade without backup. Again, have u experienced any bug so far on realme ui?
Click to expand...
Click to collapse
Put some labour on searching through Internet please. So you will be sure if to update or not
To me it works just fine.
Mikelsteven said:
Thanks man. I don't know what reliable backup method i can use on an unrooted phone. I'm on A17 so i guess it's safe to upgrade without backup. Again, have u experienced any bug so far on realme ui?
Click to expand...
Click to collapse
Black Screen problems while playing COD Mobile. Iit is a common problem on sobre Android 10 upgraded devices.
But all the rest of software running and working smoothly.
can someone please confirm if the feature of Waze returning to top during voice call is working? i have the globalized version by mettis and it doesn't work there (have CN device)