Connection problem with Android Auto and VW's App Connect - Android Auto General

Hi,
neither my Xiaomi Redmi Note 7 (xiaomi.eu beta) nor the Xiaomi Redmi 5 (stock Xiaomi) of my girlfriend can successfully connect to a new VW Golf 7. Both are running latest MIUI version, everything up to date. Data connection is enabled, USB Debugging too, we tried several cables, no Dual Apps. Once a phone is connected and Data Connection is chosen an error is displayed that a connection is not possible, USB then switches back to charging.
This is very frustrating. I found many reports about problems, most of them could be solved by using different cables or disabling Dual App. Both Xiaomis should work with Android Auto and App Connect, at least that's what (some) people claim.
Any ideas what to test?

I use AA on a 2019 VW Polo with my Mi 9. I dont choose data transfer, just charging is enough. You need to download latest AA app and i dont have USB debugging enabled because data transfer with USB debugging always causes trouble.

pirx666 said:
Hi,
neither my Xiaomi Redmi Note 7 (xiaomi.eu beta) nor the Xiaomi Redmi 5 (stock Xiaomi) of my girlfriend can successfully connect to a new VW Golf 7. Both are running latest MIUI version, everything up to date. Data connection is enabled, USB Debugging too, we tried several cables, no Dual Apps. Once a phone is connected and Data Connection is chosen an error is displayed that a connection is not possible, USB then switches back to charging.
This is very frustrating. I found many reports about problems, most of them could be solved by using different cables or disabling Dual App. Both Xiaomis should work with Android Auto and App Connect, at least that's what (some) people claim.
Any ideas what to test?
Click to expand...
Click to collapse
I had the same problem on my mk7 jetta and in my case it was caused by having the USB modem activated on my phone (I often use my phone as a WiFi USB modem for a desktop computer not equipped with WiFi card). Turning back every USB option to normal/off did the trick for me. USB debug is not required.

Did you fix erro?
Helo, did you fix erro? I'm with the problem like you!

Related

After Update to Pie Mobile Phone crasht by during connecting car

Hello, everybody
Before I did the update to Android 9 on my Huawei P20 Pro, AA worked fine in combination with the Opel Intellink. Unfortunately, this has changed to a disadvantage since the update. As soon as I connect my mobile phone with the USB cable, the system asks me which USB option I want. So far so good.
But now it comes: As soon as I activate "Android Auto" in the Intellilink 4.0 settings, my phone crashes and tries to reboot. I already tried everything possible:
- other cable
- AA de- and newly installed
- Bluetooth newly paired
- USB debugging enabled (developer mode enabled)
- USB option set to MTP
- Wipe Cache partition performed
nothing helps.
Even if I don't have AA installed it crashes.
Does anyone have this phenomenon too?
Without activation this is not a problem. Bluetooth also works here.
Many thanks in advance for any suggestions or solutions.
Greetings Finrok
Me too - solution please?
Same here. Working just fine before the update. Now whenever I connect the phone to the car via USB it crashed and reboots. Tried the same as above but I can't see a solution.. I've managed to get it working since by uninstalling and unpairing the device. Plugging it in and reconnecting. But as soon as I unplug and go again next time it crashes again and reboots as before.
Not an issue with the cable, cache or Bluetooth.
May also be worth noting, I also have a p20 pro. Brand new in November
Has anyone figured it out? Please!
Was it OTA update or one of the methods from the forum (eRocovery, OTG)?
Is factory reset an option for you?

P30Pro and Android Auto

Hello,
i have a P30 Pro with the Firmware VOG-L29 9.1.0.178(C431E4R2P2) and a problem with Android Auto.
If i connect the P30Pro with my car, there is a connection error.
The USB Settings on the phone switch automaticly to only charging. If i switch to data transfer it changes automaticly to only charging.
On the last Firmware i have no problems with the connections to Android Auto.
Have anybody the same probleme or an idea?
Thank you
Lapidu
Sometimes, I have to select the data transfer setting two or three times before it will connect to the car. But it always works after 2 or 3 times. USB debugging might also make it work better.
I have no problems and never had. Also i never changed the connection mode, nor did i enable usb debugging. I'm using the original cable, though. Some cars/phones seem to have problems with cheap usb cables, my dad also noticed that but is fine after using the original one.
Was it working once? Did you registered the car in Android Auto or has is failed ever since? Is there a message on the phone?
Witch firmware do you have? And what for a model?
Worked on every firmware since beginning (185 atm). 128 GB Version
I have similar issue, the connection "dies" everytime I connect it to the car for the first time after being parked. Takes about 1-2 minutes, then it disconnects. I haven't investigated what the phone does, but my quickfix is usually to plug the cable in/out. After that, the connection is stable. The issue started around .162 or .165
Hi all. I have this problem as well. Just bought a carplay, but my P30 Pro (Android 10) wouldn't connect at all. I tried with different cables, including original one, still no luck. WIth any other cable it works fine from a Samsung Note 10+. Any idea?
I have the same issue with my P30 pro and civicX
After emui 10 I just can't use android auto in the car.
I have the app on my phone, and it works on the phone. But when I connect to the car it wont work.
(all the Samsungs and apple that I have home work perfectly)
I'm using emui 10 and android auto.
I have the same problem as all people here.
After usb plug, only charge (that's not important) . Some times connects at first time and some other i have to select other usb connection mode (i discovered unplug cable is not necessary)
Will try to change usb cable with the original one
Hello there! I'm trying to connect my P30 Pro with Android Auto on a Seat Leon. I always receive an error message and the connection with android auto always fails. I tried to enable Usb Debug, to install old versions of AA on my phone (for example v. 5.3 and v. 5.4). I'm using the originale data cable (actually two of them since I have two P30 pro at home). AA worked well with my old Samsung Note 8 and Mate 10 Pro. Do you have any suggestion? Thank you!
you guys need better cables, use the factory Huawei one and you'll have no issues.
I'm using two original cables (I have two P30 Pro at home). It isn't a cable problem but probably an issue with Android 10 and Android Auto. This problem affects different recent models of Huawei (P30 pro, mate 20 pro..).
Hello there! Just an update, AA doesn't work only with the Seat Leon. I tried other cars and everything is ok. I will try to update Full Link Seat.. It should solve the issue. Byee
Inviato dal mio VOG-L29 utilizzando Tapatalk
I had android 10 and 10.1 stock cable a no issues whatsoever. I just traded phones with my little bro for a s10e ??
Hello! My p30 pro can connect with Hyundai kona (2021) via usb cable. But in wireless mode, the coonection has issue: the wificonnection is over the 4g+ connection, so, I don't have mobile data on the kona's device. What can I do?

[SM-973F/DS - Exynos] USB issue, no data connection to PC possible

A few days ago I bought a used S10 with Android 11 (Build: RP1A.200720.012.G973FXXU9EUA4, Stock ROM).
The previous owner rooted the S10 via Magisk because he had problems with Android Auto and his car stereo.
Root didn't solve the problem and he removed root again.
He couldn't close the bootloader afterwards, so the bootloader is still open. He said he didn't have installed/flashed TWRP or any custom rom..
Since then, the USB interface no longer works properly.
No data connection to the PC can be established, only charging works.
All devices that are connected to the S10 via an OTG cable are recognized, but only for charging. Other options in the S10 USB settings cannot be activated.
But, the connection to a screen via a USB-C to HDMI adapter (DELL DA200) works without any problems. The S10 recognizes the monitor directly as an external display and the monitor also shows the screen content of the S10.
I think it's a software problem, right?
I tested different USB-C cables, several OTG cables with different PCs and notebooks. No PC/notebook recognizes the S10 and no other USB device is recognized by the S10..
Is there a way to re-flash the S10 with Stock ROM and close the bootloader?
Maybe via ADB over Wifi?
Or is there another way to restore the data functionality?
I absolutely need the data functionality because I want to fly my Dji drone with the S10.
Greetings and thanks in advance
My problem is now "solved".
Yesterday I went into donload mode via WLAN ADB and locked the bootloader again.
The result was that the S10 only booted into download mode.
**** happens.....
Fortunately, I was able to buy a completely destroyed S10 (display and back cover) nearby for little money and convert the mainboard into my S10.
Thanks to everyone for the many input and the many tips.

USB Data Not Working

Hello,
I have a Xiaomi Mi 9T Pro phone on which USB data transfer stopped working. Neither connecting the phone to the computer, nor connecting a USB OTG device work (although fast charging works fine). I'm not sure when it happened, however I think I updated the firmware/vendor sometime around then. Also, I'm running the latest Arrow OS 11 (which is quite out of date now..) I tried changing the board with the USB port but to no avail. I've also tried multiple USB cables, which I confirmed to work on another device. I even tried booting the phone into EDL (as well as fastboot) mode, however device manager doesn't recognize the device (and I doubt it's the drivers as it would probably result in the device appearing as QHSUSB_BULK, not "device descriptor request failed").
Has anyone dealt with such a problem before? Could it be caused by bad vendor/firmware? Or is it a hardware issue, which could be diagnosed? Perhaps the custom ROM could be somehow safely updated without a USB connection (with it being necessary to format data)? Thanks for any help!
Did you ever find the solution for your issue? I have a very similar problem, which appeared as far as I can remember without having done any updates before:
On my Mi 9T Pro I can slow charge (very slow, complete recharge takes 8+ hours), but I do not get working quick charge or a working usb connection.
I had the same problem a while back which was solved by changing the USB board. This time however, I have changed the USB board multiple times (at first I thought the new board was faulty) but I did not help.
muellermeierschmidt said:
Did you ever find the solution for your issue? I have a very similar problem, which appeared as far as I can remember without having done any updates before:
On my Mi 9T Pro I can slow charge (very slow, complete recharge takes 8+ hours), but I do not get working quick charge or a working usb connection.
I had the same problem a while back which was solved by changing the USB board. This time however, I have changed the USB board multiple times (at first I thought the new board was faulty) but I did not help.
Click to expand...
Click to collapse
Hello, I have similar problem. USB OTG doesn't work at all (in custom recovery or in rom). I guess changing USB charging port may help... but I'm not sure. Did you manage this problem? (I have other two 9t pro which works so it's not problem with USB cable).

Xiaomi 12T Pro - problem with wireless connection to Android Auto

Hi everyone,
I'm having an issue with my Xiaomi 12T Pro and Android Auto. I've been using Android Auto wirelessly via Bluetooth on my KIA CEED 2023 MY(wireless support) for the past three weeks without any issues. I even updated my phone to Android 13 and MIUI 14 about 2 weeks ago, and everything still worked fine.
However, couple days ago when I was driving my car, Android Auto suddenly stopped working during my drive. Since then, I've tried factory reset of my KIA infotainment system, network setting reset, unpairing and repairing Bluetooth, and even installing the latest version of the AA mirror apk. I've also uninstalled and reinstalled the current version of AA from Google Play, but I still can't connect to Android Auto wirelessly and the only error message is during the attempt of connecting: "The phone is not responding. Try it again".
The connection with a cable works fine. I tried 3 other phones on my car - all work. I tried to connect my Xiaomi 12T Pro to a different car and I have the same problem as on my Kia.
Even Android Auto support seems to be helpless. I shared with them a bug report, tried some suggested setups, but nothing works..
Does anybody have any ideas or have same experience?
Hello, the same thing happens to me with the carplay of my mercedes benz. And driving seems to disconnect my Xiaomi 12T PRO. I still don't have a solution from the manufacturer Xiami or the manufacturer of the carplay module. Is there anyone who can help us?
First of all, make sure you have the latest available firmware for your headunit. I don't know where you live but in some regions the Kia and Hyundai headunits can be upgraded by using the Kia Navigation Update application and a spare USB thumbdrive.
This said, I've had similar issues in a Kia Rio when using Android Auto wirelessly:
* Make sure the hour and date are set correctly in your headunit. Sometimes the headunit craps itself while trying to get the GPS hour and it sets incorrectly, wich causes conectivity issues with Android Auto
* Make sure your phone is not connected to any other bluetooth device before connecting to the headunit. I have a couple Xiaomi phones and neither of them is able to use Wireless Android Auto if they're connected to a wireless headphones, a laptop or a smartwatch. I don't understand why this happens but only happens with Xiaomi phones.
* MIUI has a battery optimization feature wich kills some apps and background services to save energy. Even if you disable it for some of your apps, sometimes a MIUI update will override this and cause problems. Make sure Android Auto, Google Maps, your music app and your messaging apps are excluded from the battery saver features, and make sure Google Maps has the location permission set to "all the time".
* Unpair your phone from the headunit and sync it again.
* Go to Android Auto settings (in your phone) and make sure that Wireless Android Auto toggle is enabled. Disable the Android Auto's developer mode if it's enabled.
* Factory reset the headunit and try to sync your phone again. The first time you sync the phone, do it with the USB cable.
YgorTN said:
Hi everyone,
I'm having an issue with my Xiaomi 12T Pro and Android Auto. I've been using Android Auto wirelessly via Bluetooth on my KIA CEED 2023 MY(wireless support) for the past three weeks without any issues. I even updated my phone to Android 13 and MIUI 14 about 2 weeks ago, and everything still worked fine.
However, couple days ago when I was driving my car, Android Auto suddenly stopped working during my drive. Since then, I've tried factory reset of my KIA infotainment system, network setting reset, unpairing and repairing Bluetooth, and even installing the latest version of the AA mirror apk. I've also uninstalled and reinstalled the current version of AA from Google Play, but I still can't connect to Android Auto wirelessly and the only error message is during the attempt of connecting: "The phone is not responding. Try it again".
The connection with a cable works fine. I tried 3 other phones on my car - all work. I tried to connect my Xiaomi 12T Pro to a different car and I have the same problem as on my Kia.
Even Android Auto support seems to be helpless. I shared with them a bug report, tried some suggested setups, but nothing works..
Does anybody have any ideas or have same experience?
Click to expand...
Click to collapse
Turn off power saving settings clear cache when locked & disable mobile data when locked
then Check battery saving settings for android auto app and system service. Also turn off miui memory optimization, just because. It always fcks up background processes at little gain to the user.
Edit: apparently most of these settings are gone in MIUI14.0.5 global rom/Android 13
Thanks for your advice guys. Meantime, I did a factory reset, and since then everything works fine.
ALas its a miui bug known since ages. If the device for whatever reason losses connection to the mobile network the devs somehow made sure the device disconnnects any Wifi connection. Hence AA stopping working.
Want to test tthis?
Simply deactivate mobile data on your phone and activate it again.
yuukiw said:
ALas its a miui bug known since ages. If the device for whatever reason losses connection to the mobile network the devs somehow made sure the device disconnnects any Wifi connection. Hence AA stopping working.
Want to test tthis?
Simply deactivate mobile data on your phone and activate it again.
Click to expand...
Click to collapse
It has been fixed in n miui 14.

Categories

Resources