Hello everyone, i have some problems. I instaled with Odin android 10 for DBT, over my TOP firmware (SERBIA VIP), everything works fine, but i ended with BTU CSC. I tried with SamKey to change CSC, but it gave me error "AT RIL file not found, try reinstaling SamKey". Tried to reinstall, but it gave me same error. What is the solution for this? Please help!!
Related
Hi there,
Is it possible to change the CSC of my note9 SM-N960F from Australia (XSA) to Singapore (XSP)? I believe both are part of the multi CSC OXM firmware but there's little information on how to go about changing the CSC.
So far I've tried the following 2 methods but unfortunately, I'm still stuck on the XSA CSC.
Method 1:
- Power off the device
- remove the sim tray.
- Go to recovery , HOLD bixby button + Volume up together , and power up
- In recovery , chose factory reset .. This will give a warning and then reset everything
- Choose power off , in the recovery and insert sim tray .. you should do this before booting up as your CSC will be configured when you will start
- Power on the phone , wait and . then chose restart to system now when asked
- wait and after reboot. CSC remains unchanged
Method 2:
*#272*IMEI# to change CSC but I'm getting the "connection problem or invalid MMI code"
any input would be greatly appreciated!
hello
you can try this solution in post 67 : https://forum.xda-developers.com/ga...n960n-n960u-n960u1-n960w-n9600-t3833721/page7
regards
Hi, I have tried the solution in post #67 but my CSC is still XSA. Is it possible to just download the XSP OXM firmware and flash via odin without tripping knox?
at this time i'm unable to make a working N960 CSC file with only one CSC ( noboby is able to signe CSC file ) and as combination file don't work for this device the only solution is to find a working secret code
sorry and regards
I have N960U usa unloacked, on 8.1.
I also have Thai SIM CARD not in use.
There is any way i can upgrade to Pie 9.0 without loosing call recording?
If i get THL CSC on my N960U i think call tecording will work.
Sny way to do this?
METOD TO CHANGE CSC (tested on N960FD) Install this rom https://forum.xda-developers.com/galaxy-note-9/development/rom-galaxy-project-t3911947 choose csc. then you can come back to your rom, I came back because I like a lot of modifications but this rom is also nice. After this operation It should be good. it helped me. I had CSC BTU samsung and I could not change the method, I did not try with the combination rom because I did not want to play like that. I know that some roms have options to choose the csc at installation and I have used it.
I hope I helped
Hello,
I have SM-N960F with XEH CSC.
I have installed by Odin v.3.13.1 XEO polish firmware (4 part firmware) eaven with .pit file. Odin called PASS!, firmware is changed but CSC is still XEH.
*#272#IMEI# doesn't work.
How to change CSC to XEO?
I suffer the same problem
I suffer the same problem
KartofeLone said:
Hello,
I have SM-N960F with XEH CSC.
I have installed by Odin v.3.13.1 XEO polish firmware (4 part firmware) eaven with .pit file. Odin called PASS!, firmware is changed but CSC is still XEH.
*#272#IMEI# doesn't work.
How to change CSC to XEO?
Click to expand...
Click to collapse
I read that you take a pit-file - why?
Did you take this firmware?
https://www.sammobile.com/firmwares/galaxy-note9/SM-N960F/XEO/download/N960FXXS2ARK2/243456/
Where do you see your CSC?
bininga59 said:
I read that you take a pit-file - why?
Did you take this firmware?
https://www.sammobile.com/firmwares/galaxy-note9/SM-N960F/XEO/download/N960FXXS2ARK2/243456/
Where do you see your CSC?
Click to expand...
Click to collapse
Thank you for intrest in my problem.
Tutorial on polish forum said to take a .pit file and check repartition box - I followed instructions.
I see my CSC in Settings/Telephone - informations (I'm translating from polish it may be diferent named in english, it's last card on the bottom of Settings)/Firmware informations - there I can see CSC
About 10 minutes ago I have resolved the issue.
I have inserted different sim card (from my work) and CSC has changed to XEH/XEH/XEO/XEH.
Then I switch SIM to second slot and CSC become XEH/XEO/XEO/XEH.
Then I did factory reset and now I have XEO/XEO/XEO/XEH
Bottom line instaling new firmware doesn't automaticaly change CSC. You need to insert SIM card to one slot, then to second slot and then do factory reset.
I hope this could help others.
Edit:
Not every SIM card will change CSC. If you have trouble try different SIM card preferably from different operator.
This post was published over 4 year ago, and now I encounter this issue too!
My phone is SM-N960N, and I did flash the corresponding firmware with .pit for multiple times with original system unchanged (CSC code: KTC). What's more, I just got this phone last night!
Does the computer OS itself cause this issue? I promise that Samsung USB driver is well installed.
Hello guys... sorry for making two topics but first one i posted in wrong section so im adding it here... sorry for that, some mod please remove first topic... So... i have strange problem. im using g973f s10 bought in polish brand store (Plus). When i received phone i had CSC PLS / PLS / PLS / PLS , i changed firwmare to DBT ASII, my csc swapped to BTU / BTU / BTU / PLS . I installed manually beta 10 on my s10, everything works just fine but i wanted to have my original country csc (XEO) so i bought credits for samkey, and i keep getting same error.... i tried on 3 diff pcs, 2 with windows 10, and current one with windows 7, i log into my acc, check adb connection, everything is just fine, finds my phone. and then when i put XEO in csc field and try to change it, samkey tries to " prepare ril module " when it finish it just gives me error :
at ril file not found, please try reinstall samkey....
my imei is working without problem, i got signal , lte etc so i rly have no clue what to do... i tried to do it with inserted sim, with taken off, tried reinstalling samkey, reinstalling adb/usb drivers, nothing works. please help me guys cause seems like i just wasted money and im stuck on that stupid btu without ota or anything....
Hello
NEW UPDATE FOR R855F
To update with netOdin see here how to do it
https://forum.xda-developers.com/showthread.php?p=78800094
EF FILE EXTRACTOR
https://mega.nz/file/40NQ3YaL#JL5cq46ErZFoSFB-fxMmOsKBd44VDcMgUtOl8Ji8hrA
####This process will factory reset your Watch, so make sure you've backed up everything you need!#####
R855FXXU1CTJ5_Tizen_4File_CSC (OXA).zip uploading
R855FXXU1ATFB_Tizen_4File_CSC (OXA).EF_68565d8973
R855FXXU1BTH4_Tizen_4File_Multi CSC (OLB).EF_70e7868c64
COMBINATION-FT55_R855FSQU1ATI1.EF_dc8bd94b12
COMBINATION-FT55_R855FSQU1ATG2.EF_93d4d92c5d
https://www.androidfilehost.com/?w=files&flid=318652"
*edit*: Never mind, figured out. Thanks a bunch for the files
Nmc_alves® said:
Hello
NEW UPDATE FOR R855F
To update with netOdin see here how to do it
https://forum.xda-developers.com/showthread.php?p=78800094
EF FILE EXTRACTOR
https://mega.nz/file/40NQ3YaL#JL5cq46ErZFoSFB-fxMmOsKBd44VDcMgUtOl8Ji8hrA
####This process will factory reset your Watch, so make sure you've backed up everything you need!#####
R855FXXU1ATFB_Tizen_4File_CSC (OXA).EF_68565d8973
R855FXXU1BTH4_Tizen_4File_Multi CSC (OLB).EF_70e7868c64
COMBINATION-FT55_R855FSQU1ATI1.EF_dc8bd94b12
COMBINATION-FT55_R855FSQU1ATG2.EF_93d4d92c5d
https://www.androidfilehost.com/?w=files&flid=318652"
Click to expand...
Click to collapse
Hello..
Thank You for these files and tutorial..I have seen newest FW for GW 3 which is R855FXXU1CTJ5
I would like to ask some questions..
Is it possible to find , download and try it ? My problem is with german region in my watch ..Due to this LTE function doesn t work either with R855FXXU1ATFB_Tizen_4File_CSC (OXA).EF_68565d8973 or with R855FXXU1BTH4_Tizen_4File_Multi CSC (OLB).EF_70e7868c64../ need slovak csc /XSK /.Combination files I didnt know how to use with netodin..Flashing first file the watch remained in DBT - german region.. And with flashing second one- multi csc file- it paste in australian region XSA.. Or is it possible to change or choose CSC during flashing or setting procedure ?? Thank You in advance for Your answer..
excer said:
Hello..
Thank You for these files and tutorial..I have seen newest FW for GW 3 which is R855FXXU1CTJ5
I would like to ask some questions..
Is it possible to find , download and try it ? My problem is with german region in my watch ..Due to this LTE function doesn t work either with R855FXXU1ATFB_Tizen_4File_CSC (OXA).EF_68565d8973 or with R855FXXU1BTH4_Tizen_4File_Multi CSC (OLB).EF_70e7868c64../ need slovak csc /XSK /.Combination files I didnt know how to use with netodin..Flashing first file the watch remained in DBT - german region.. And with flashing second one- multi csc file- it paste in australian region XSA.. Or is it possible to change or choose CSC during flashing or setting procedure ?? Thank You in advance for Your answer..
Click to expand...
Click to collapse
R855FXXU1CTJ5_Tizen_4File_CSC (OXA).zip uploading
Nmc_alves® said:
R855FXXU1CTJ5_Tizen_4File_CSC (OXA).zip uploading
Click to expand...
Click to collapse
Hello again..
Thank You very much for this file..During last week I ´ve tried to do with changing region in my galaxy watch 3.. When I flashed either oxa or olb firmware, my watch ran without problem except for LTE function / nordic - NEE in OXA and australian XSA in OLB version..I need XSK/ .. Flashing both combination FW/ FT55 R855FSQU1ATI1 and FT55 R855FSQU1ATG2 EF failed with written note in the end ..file not supported..My last question..If I find somewhere the latest combination FW / FT55 R855FSQU1ATL1/ is it possible to flash it with success and change region with method above when this new FW / R855FXXU1CTJ5 / is flashed correctly on my watch or there there will be failure again..
Thank You ...
Hello,
Do you know where to get the TPH files? I live in Portugal, but these files until I understand are OXA or OLB csc's, which are not the ones available in Portugal, which are OPT, OXX*, TCL (Vodafone), TMN, TPH (unbranded). My software version is R855FXXU1CTJ5 and currently in ZTO csc.
Hello there,
I have bought phone that was from different distribution than my country, everything is fine except I don't get any updates. I'd like to change my CSC code from BTU to XEO but without wiping the phone and without tripping Knox. I have read that it is possible by flashing HOME_CSC file. I downloaded the latest samsung original firmware from Sammobile and got five files. I know i should flash HOME_CSC but I dont know if I should flash all the other ones. Can you help me with the process and share some tips? Thanks
This thread may help you if you care to read 30 pages worth of posts:
Now you can not change CSC code with firmware + SIM-card
I could easily change the CSC code on my Note9: just installed OXM firmware + factory reset with needed code SIM-card (Thailand for example). But this method does not work anymore. How to change a CSC code on S10?
forum.xda-developers.com
Not possible without wipe. More here https://forum.xda-developers.com/t/is-it-possible-to-change-csc.4215105/