Related
Hello fellow Redmi S2 community
We finally have some custom rom/ Project Treble roms available to use
Please NOTE: Most are unstable as daily drivers as we still don't have developer support for our little device
Disclaimer
You know the drill, I'm not responsible for what happens to your device
good luck!
Let's begin!
I have been testing different project treble roms AND the Miui base roms (ranging from stable Miui9 - 10 and beta's) to find the most 'stable' daily driver
The best combination to date is using the Sep 11th MIUI 10 global stable with Resurrection Remix.
However if you do want to experiment, I highly recommend doing so as the Project Treble roms are updating constantly.
I will leave links to recommended ARM - A roms below and the recommended MIUI 10 base roms to flash over.
What you need:
Miui Base rom both Fastboot & Recovery (I recommend MIUI 10 stable)
Project Treble GSI (gemeric system.img)
Fastboot installed on your PC - there are plenty of tutorials, use google
GAPPS (please note I have had a lot of difficulties installing gapps and HIGHLY recommend you download a rom with gapps go pre-installed. You can use apps like LINK2SD to delete the Go-version and install the fulll version later)
A little bit of patience and time - first boots can take 5-10minutes
MIUI 10 Roms
https://www.theandroidsoul.com/xiaomi-redmi-s2-update/
[ARM - A] Project Treble Forums
https://forum.xda-developers.com/pr...-device-development/index-one-thread-t3812343
Fastboot for; Windows - Mac - Linux
https://www.lifehacker.com.au/2014/...ll-androids-adb-and-fastboot-tools-on-any-os/
Download links to Roms: Check the forum link above for more ROMS
9
https://sourceforge.net/projects/havoc-os/files/
8.1.0
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
https://androidfilehost.com/?w=files&flid=271118
https://androidfilehost.com/?w=files&flid=278902
https://androidfilehost.com/?fid=746163614322269351
Open GAPPS - I RECOMMEND USING MICRO-NANO-PICO. There are plenty of installation issues
https://opengapps.org/
Known Issues
There are many, let me know and I will compile a list
Brightness scaling
Auto-brightness
Instructions
Backup ALL data & partitions
Boot into TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Flash MiUi stock rom VIA fastboot
When rom flash is complete DO NOT BOOT THE ROM
Reboot into Fastboot
Make sure your GSI or system.img is in your Fastboot folder
Run this command: fastboot flash system the-name-of-your-rom.img
For example: fastboot flash system-180818-arm-aonly-vanilla-nosu.img
Now the ROM has been flashed, you can install TWRP, Magisk and GAPPS or just reboot into your new rom
If I helped you please thank me, it helps a lot enjoy your new project treble roms!
DrDrag0n said:
Hi guys
First of all I am NOT A DEVELOPER!
There are plenty of issues with every AOSP treble build but they can function OKish for daily use.
You can install almost any Project Treble GSI that has support fo devicesr: ARM - A
I recommend using ResurrectionRemix - it has been the most stable for daily use I have experienced so far
https ://sourceforge. net/projects/resurrectionremix-oreo/files/armaonly/
^ ^
-remove the spaces-
You need the system.img (Generic System Image - these are used for project treble roms) to proceed further.
THIS WILL DELETE ALL OF YOUR DATA. MAKE A BACKUP OR SAVE YOUR FILES ELSEWHERE.
and of course I am not responsible for anything that happens to your phone, do this at your own risk and be prepared to face bugs! and use google to find out how to overcome them.
good luck my friends!
Known issues:
You tell me
Instructions :
Download the latest .img build and GApps
Download the latest Miui 10 Beta recovery rom current - MIUI 10 8.8.30
Reboot to TWRP recovery
Wipe data/factory reset
Wipe data (backup)
Advanced wipe- system cache dalvik data
Flash latest stock rom - MIUI 10 8.8.30 beta
Reboot to fastboot
Plug your phone into your computer
copy your downloaded GSI.img to your adb&fastboot folder
Flash via fastboot: fastboot flash system the-name-of-your-rom.img
Reboot into TWRP & install Magisk
- PLEASE NOTE I HAVE HAD PROBLEMS WITH INSTALLING Gapps, PLEASE TRY AND FIND A ROM THAT COMES WITH Gapps. YOU CAN USE L2SD TO DELETE THE GO VERSION AND INSTALL THE FULL VERSIONS FROM PLAY STORE LATER-
Reboot
I am not a developer, this is not my main device but I am here to help solve any problems or try and help find solutions!
If any developer would like to give us support please let me know!
Click to expand...
Click to collapse
have you tried it
Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes tried and succeeded! ResurrectionRemix seems to be most stable to date but they update all the time so experiment yourself
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
did u try the 64 bit one?
Is it 64bit or not?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
Is it 64bit? Is it stable to use as a daily driver?
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
our system only support 32 bit only... dont try the 64bit... it might bring harm to your device
What about jio volte is it working on it and if yes then how because in minbe it is working
Zaid Sheikh said:
have you tried it
Click to expand...
Click to collapse
Yes, ResurrectionRemix works nicely
wmfaiz said:
did u try the 64 bit one?
Click to expand...
Click to collapse
Yes I have tried the 64 bit ROMs,
They do not boot
Gohar___Nadeem said:
Is it 64bit? Is it stable to use as a daily driver?
Click to expand...
Click to collapse
It's kind of stable, it gets better after every GSI update. ResurrectionRemix is the most stable that I have tried
Zaid Sheikh said:
What about jio volte is it working on it and if yes then how because in minbe it is working
Click to expand...
Click to collapse
Use MagiskModule VoEnabler to enable volte
If you try arm64aonly it will stuck at mi logo.
DrDrag0n said:
Yeah I am using ResurrectionRemix right now. Pretty sure the post was clear about that XD
Click to expand...
Click to collapse
I wanna use resurrection remix. Please give me link
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
search on google you will get it
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
Hey man, link is in OP, there are 2 spaces that need to be removed
M2S73R said:
I wanna use resurrection remix. Please give me link
Click to expand...
Click to collapse
https://sourceforge.net/projects/resurrectionremix-oreo/files/armaonly/
can any1 confirm if volte works or not plz ?
xoloera2x said:
can any1 confirm if volte works or not plz ?
Click to expand...
Click to collapse
It depends what GSI you choose to work, but VOLTE is working on resurrection remix
Updated list of roms
New guide - better experience
Direct download links
Looking forward to seeing more Project Treble roms out there!
Please support rom
Some applications are not supported because they support 64-bit architecture, which refmi s2 cpu can run 64-bit version. However, the developer has only 32-bit in operating system, which causes a lot of problems. One of the major problems is that you can not install a 64 bit application. Please help make this a ROM.
Users of Redmi s2 have asked the developers of Xiaomi's way to make a new ROM that supports 64-bit architecture, but has ignored it and has never talked about it.
Kernel source:
https://github.com/omnirom/android_kernel_nubia_nx609j
Device tree:
https://github.com/omnirom/android_device_nubia_nx609j
Download:
omni-9-20190902-nx609j-HOMEMADE.zip
TWRP: twrp-3.3.1-0_CPTB-20190901-01-SAR-NX609J.img
How to flash:
Make sure you're on latest Pie firmware
Boot to TWRP
Wipe data
Flash ROM
Optional: flash gapps
Reboot
Known issues:
-You tell me
XDA:DevDB Information
OmniROM 9.0, ROM for the ZTE nubia Red Magic
Contributors
vache
Source Code: https://github.com/omnirom
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2019-08-28
Created 2019-08-28
Last Updated 2019-09-03
It is working fine with Chinese oreo also. If anyone needs help then i can help them
Here are some screen shots
Nice, I will try it ASAP...
ABM30 said:
Nice, I will try it ASAP...
Click to expand...
Click to collapse
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
methuselah said:
I had issues with Chinese firmware of pie. Twrp was not booting but for developer it was botting fine. That a why I had to flash Chinese firmware first 2.26 and then after flashing you need again flash those files in fastboot after unlocking it.
Click to expand...
Click to collapse
How much time needs to boot up? It is already 7 min and still on omni booting animation
I think I need to start over (even i have wiped with original recovery but...)
P.S You have used 2.26 CN or 2.36CN ROM?
EDIT:
Which version of TWRP are you using? I am on 3.3.1.
EDIT 2
OK, I am in OMNI! ...with Bluespark TWRP!
@ABM30 are you on telegram?
methuselah said:
@ABM30 are you on telegram?
Click to expand...
Click to collapse
The firmware of the connection is invalid？
Where can I download omnirom9.0？
New build up !
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
vache said:
omni-9-20190902-nx609j-HOMEMADE.zip
Install process has change, Pie firmware is new mandatory. Also make sure to use the TWRP linked in OP.
Changelog:
Switch to P kernel sources
Fixed encryption
Fixed WFD (Wifi display)
...
Click to expand...
Click to collapse
So it begun
navik said:
The firmware of the connection is invalid？
Where can I download omnirom9.0？
Click to expand...
Click to collapse
Download the 3.19 Chinese firmware and flash that first.
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
ianseer said:
Thank you so much, i will try it in this week, and spread this on red magic pages comments, everyone already seems hopeless... Thanks @vache, thanks @methuselah too ?
Click to expand...
Click to collapse
Thanks @vache only. Not me. He is the only one because of which we got omni pie.
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
methuselah said:
So it begun
Download the 3.19 Chinese firmware and flash that first.
Click to expand...
Click to collapse
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
alrfa3y-1 said:
i need to install chinese first then in twrp wipe system and data then flash the omnirom 9.0 right?
i need to wipe system or leave it?
Click to expand...
Click to collapse
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
ianseer said:
Btw... The RGB light features, is it gone? Or we need to port it from the cn rom to get such features?
Click to expand...
Click to collapse
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
thank you very much man ?
methuselah said:
Yes first install chinese, then unlock Boot loader and flash given twrp in this thread. And then wipe everything except internal storage. Flash omni and gapps.
I guess it won't be coming. Its not part of aosp code so. The effects are not gonna be tweaked I guess. Back led perfectly fine.
Click to expand...
Click to collapse
hi please can you confirm the rom is stable ?
if ok i will try ?
alrfa3y-1 said:
hi please can you confirm the rom is stable ?
if ok i will try ?
Click to expand...
Click to collapse
It's better than official in everyway. Latest security patch. What do you need
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
methuselah said:
It's better than official in everyway. Latest security patch. What do you need
Click to expand...
Click to collapse
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
now its work with mind the gapps thank you all
i flash the rom without gapps its work fine but wiht nano gapps stock in bootloob
i dont know why
Click to expand...
Click to collapse
Well I guess you should have grabbed a recovery log right after flashing Omni and gapps before booting to the ROM. (just flash ROM and gapps), go to advanced and I then "advance menu of twrp".
There is this option there to grab recovery log and dmesg". Grab that and post it here. @vache could have looked into it.
I'M NOT RESPONSIBLE FOR ANY DAMAGE AND/OR DATA LOSS AS A RESULT OF FLASHING THIS ROM !!!
PLEASE PERFORM FULL BACKUP IN THE MICRO SD CARD OR IN AN EXTERNAL STORAGE BEFORE YOU TRY !!!
Do you need reliability and predictability? Then better stay with THIS ROM
I have decided to create a separate thread because:
- I would like to distinguish Android Q BETA bug reports from my normal (Pie stable) thread, mentioned above
- It is normal that there will be definitely much more "bad reports" here, because most of them will be "beta related"
This thread will be closed when Samsung will release stable Android Q (One UI 2.0)
Everything you will need to know about DevBase ROM in general - you will find in my stable thread (mentioned above)
Differences comparing to stable Oreo DevBase ROM:
- No AppLock (yet)
S9 (SM-G960F/DS/FD):
>> G960FXXU7ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
S9+ (SM-G965F/DS/FD):
>> G965FXXU7ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
S9 Korean (SM-G960N):
>> [nobody sent me a dump yet] <<
Click to expand...
Click to collapse
S9+ Korean (SM-G965N):
>> G965NKSU2ZTA9_DevBase_v7.1.zip <<
Click to expand...
Click to collapse
Dirty flash over my Pie DevBase ROM SHOULD WORK WITHOUT ISSUES but before you try - I would highly recommend you to set default (stock) theme and default (stock) icons !!! However - I would recommend you clean install (Wipe -> Swipe to Factory Reset is enough)
NOTE1: This time it is mandatory to update also bootloader to Q - otherwise ROM will not boot
>> BL_G960FXXU7ZTA9.zip <<
Click to expand...
Click to collapse
>> BL_G965FXXU7ZTA9.zip <<
Click to expand...
Click to collapse
>> BL_G965NKSU2ZTA9.zip <<
Click to expand...
Click to collapse
NOTE2: If you want to perform clean install with encryption - it is highly recommended to use TWRP 3.2.3.0 to format /data. More info about bug with TWRP 3.3.1.x - HERE
Known issues:
- SafetyNet does not pass (it is intended by Samsung in beta builds)
- Please let me know
Thanks to:
- all users mentioned in my main thread
- @henklbr for links to update.zip(s)
- @corsicanu & @ambasadii for tips related to Q beta
Do you want to provide dump (e.g. for G960F or a newer version for G965F)?
Please do as follow:
- Make sure OEM unlock is ON
- Flash TWRP but don't let device boot to system after that - use power+bixby+vol_up combo immediately after phone rebooted automatically
- Tap "Keep read only"
- Wipe -> Format data -> "yes"
- Reboot -> Recovery
- Copy attached zip to the device
- Flash it and wait a few minutes
- Copy /sdcard/G960F_dump directory to the PC and compresss it (zip / 7z / rar / etc..)
- Share me and wait for a new Q build
NOTE: DO NOT use Magisk or other boot patchers before you run my zip - I need PURE clean kernel and other images !!! After you run my zip and copy result to PC - you can do what you want
G960F? ????????
Wow, this is fast. Even though this just a test, I'll try and report soon
Sent from my SM-G965F using Tapatalk
Unable to flash magisk
Bookmark wait for more feedback
I have Soldier's latest ROM on my S9+, and i want to try this ROM. I need to wipe "everything" in TWRP, and after a TWRP restart i need to flash the ROM, and after the BL, or first the BL and the ROM?
PrinceLc said:
Unable to flash magisk
Click to expand...
Click to collapse
Magisk is on board, there is no need to flash it separately
Ronam said:
I have Soldier's latest ROM on my S9+, and i want to try this ROM. I need to wipe "everything" in TWRP, and after a TWRP restart i need to flash the ROM, and after the BL, or first the BL and the ROM?
Click to expand...
Click to collapse
First ROM, then BL (one by one). This order is recommended because BL update forces auto reboot
_alexndr said:
Magisk is on board, there is no need to flash it separately
First ROM, then BL (one by one). Ci order is required because BL update forces auto reboot
Click to expand...
Click to collapse
Thanks, i'll try it.
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
_alexndr said:
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
Click to expand...
Click to collapse
What's that issue? I've had Soldier's Pie ROM before this one.
Ronam said:
What's that issue? I've had Soldier's Pie ROM before this one.
Click to expand...
Click to collapse
CSC just remain from Pie and CscFeatures does not work - you can dirty install RC2 to fix it
_alexndr said:
I just found a major CSC issue in the installer (RC1) while updating device from Pie -> Q, please wait for updated version (RC2) !!! (RC1 worked fine only if your previous ROM was based on Q)
EDIT: Update will be available in less than one hour
Click to expand...
Click to collapse
Just updated to RC2
Please re-download the ZIP file and re-flash the ROM
Can you make exposed work, the modules won't load
Mirror link? Mega stack at 44%
And where is TWRP 3.2.3.0
All fine flashed rc2 over soldier pie rom dirty
Thread has been updated again
This time due to new Beta 5 (ZSLG)
S9+ (SM-G965F/DS/FD):
>> G965FXXU7ZSLG_DevBase_v7.0_RC2.zip <<
Click to expand...
Click to collapse
Leejhay1714 said:
Mirror link? Mega stack at 44%
Click to expand...
Click to collapse
I will upload it also to AFH
amakuramio said:
And where is TWRP 3.2.3.0
Click to expand...
Click to collapse
G965F:
https://eu.dl.twrp.me/star2lte/
G960F:
https://eu.dl.twrp.me/starlte/
Iam on beta4 with hotfix installed,
complete stock no root nothing. I dumped and will upload for @ambasadii.
Maybe it will help @alexndr aswell
Cheers.
galaxy mini said:
Iam on beta4 with hotfix installed,
complete stock no root nothing. I dumped and will upload for @ambasadii.
Maybe it will help @alexndr aswell
Cheers.
Click to expand...
Click to collapse
I did it myself already (I called it beta 5), but next time I will be glad for help/dump as it is my wife's device - next time she most probably will not give me device for so long :laugh:
_alexndr said:
I did it myself already (I called it beta 5), but next time I will be glad for help/dump as it is my wife's device - next time she most probably will not give me device for so long :laugh:
Click to expand...
Click to collapse
Are You still waiting on a dump for s9?
Isn't there a way we can edit the props to install on s9?
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. This ROM is treble enabled so you need to install treble enabled TWRP (link given below)
3. Once you are inside this TWRP go to tissot manager and make your system trebled enabled and reboot TWRP recovery
4. Wipe Data/Cache/System
5. Flash the ROM
6. Reboot to Recovery Format data type yes and slide (THIS WILL WIPE YOUR INTERNAL PARTITION)
7. Reboot to system
VOILA:fingers-crossed: NOW YOU ARE IN NEW AGE MIUI AND ENJOY THE MIUI.
Credits @EpicRom
http://www.mediafire.com/file/3il5uqi8ls42v5i/xiaomi.eu_MIUI12-V20.5.28_MiA1-GSI_9.0.zip/file
Thanks! Any bug? I can't see download link
Frep said:
Thanks! Any bug? I can't see download link
Click to expand...
Click to collapse
no prominent bugs...
uploading..
Midnite said:
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. This ROM is treble enabled so you need to install treble enabled TWRP (link given below)
3. Once you are inside this TWRP go to tissot manager and make your system trebled enabled and reboot TWRP recovery
4. Wipe Data/Cache/System
5. Flash the ROM
6. Reboot to Recovery Format data type yes and slide (THIS WILL WIPE YOUR INTERNAL PARTITION)
7. Reboot to system
VOILA:fingers-crossed: NOW YOU ARE IN NEW AGE MIUI AND ENJOY THE MIUI.
Click to expand...
Click to collapse
U ported it?
Harvey_Spectar said:
U ported it?
Click to expand...
Click to collapse
nope. i'm just sharing
Midnite said:
nope. i'm just sharing
Click to expand...
Click to collapse
Then i think it's necessary to give credits
Looks like it's on Android Pie, which is a bummer. Do both the cameras work properly, though? That would be amazing.
Can't start Wireless Hotspot Tathering
xpresotw said:
Can't start Wireless Hotspot Tathering
Click to expand...
Click to collapse
Set Hotspot type to default
xpresotw said:
Can't start Wireless Hotspot Tathering
Click to expand...
Click to collapse
Any other bugs??
Camera working fine?
Please this miui 12 version is based on which Android version? 10 ?
Mchasard said:
Please this miui 12 version is based on which Android version? 10 ?
Click to expand...
Click to collapse
9.0
Mchasard said:
Please this miui 12 version is based on which Android version? 10 ?
Click to expand...
Click to collapse
Pie
ROM is good, MIUI 12. Only problem is performance, SD625 in Mi A1 is too slow for animations, there are a lot of stutters.
4-64 version here..no stutters,.just reduce the animation to 0.5x..i didnt and its fine, rom is smooth, all is working but 2 big bugs:
-video recorder doesnt work
-front camera doesnt work
-main camera present redmi note 5 watermark
hey mate please help me with this
Midnite said:
First Time Install / Clean Flash
1. Download the proper flashable ZIP for your device
2. This ROM is treble enabled so you need to install treble enabled TWRP (link given below)
3. Once you are inside this TWRP go to tissot manager and make your system trebled enabled and reboot TWRP recovery
4. Wipe Data/Cache/System
5. Flash the ROM
6. Reboot to Recovery Format data type yes and slide (THIS WILL WIPE YOUR INTERNAL PARTITION)
7. Reboot to system
VOILA:fingers-crossed: NOW YOU ARE IN NEW AGE MIUI AND ENJOY THE MIUI.
Credits @EpicRom
http://www.mediafire.com/file/3il5uqi8ls42v5i/xiaomi.eu_MIUI12-V20.5.28_MiA1-GSI_9.0.zip/file
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a1/development/please-help-bootloop-problem-t4132411
Have you permissions yo share this Port? No, you don't have
Have you put proper credits and or source? No
When you share, at least put the proper credits or source:
MIUI Epic ROMs
Group for Epic ROMs... Feedback and ideas for Epic ROMs.
t.me/epic_roms
So people can have all the información available regarding rom and bugs/tips.
And on the other hand, why you upload to MediaFire?
ROMs are uploaded to sourceforge for a reason (monitor downloads) and you are breaking the counter.
Please, correct the thread and put link to sourceforge
Any major bugs?
reharsh67 said:
Any major bugs?
Click to expand...
Click to collapse
Yes overheating sometimes and signal issues although it detects there is sim camera works fine / not smooth but all in all it works and it boots
VoltageOS 12.1 for Xiaomi Mi 11
ABOUT
Greetings, interested users! You have reached the gateway of a simplistic, no frills pure AOSP experience that will not let you down in getting through every day uninterrupted by inconveniences, with just the right dab of customizations. Be it requiring safetynet for banking or payment apps to receiving the latest security patches from Google as soon as they're released, we've got you covered. It doesn't end there. Sit back, relax and let the system theme your device according to your preferences with Monet support. Step in and begin your journey with Voltage OS.
Features
Pure AOSP
Latest Security Patches
Google Monet
SafetyNet
Github: https://github.com/VoltageOS
Website: https://voltage-os.sourceforge.io
WHAT WORKS?
Almost everything
NO GAPPS!
its a vanilla build, so gapps need to be flashed seperate
WHAT DOESN'T WORK?
You tell me
DOWNLOADS
click here to download (Vanilla) not updated for now
Gapps Version: click here to download
Installation Guide
Clean flash recommended
Always make a backup, be safe.
NikGapps Basic recommended for better experience.
- Clean flash recommended
1. Download the proper flashable ZIP for your device
2. Fastboot boot PE Recovery (or included boot.img)
3. Wipe Cache / Data / System
4. ADB Sideload ROM
5. ADB Sideload Gapps (optional)
6. ADB Sideload Magisk (optional)
7. Reboot to System
- Update / Dirty Flash
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash ROM
4. Wipe Cache
5. Reboot to System
ROM Source: https://github.com/VoltageOS
Kernel Source: https://github.com/kamikaonashi/kernel_xiaomi_venus
Ring & Alam & Notification sound not working
inae25 said:
Ring & Alam & Notification sound not working
Click to expand...
Click to collapse
New build in 40minutes, already fixed, sorry for the inconvenience, you can dirty flash it then
IEATMILKA said:
New build in 40minutes, already fixed, sorry for the inconvenience, you can dirty flash it then
Click to expand...
Click to collapse
Thank for update. i wait new update soon.
inae25 said:
Thank for update. i wait new update soon.
Click to expand...
Click to collapse
Build is up, same download folder as before
Sorry for the delay
Solid build thank you!
Hi to all. Before wipe my data, what advantage has this rom on daily use compared with pixel edition?
Great to see a vanilla ROM!
Does the ROM support signature spoofing? Would like to use microG, hate gapps..
Thanks!
nelvinchi said:
Great to see a vanilla ROM!
Does the ROM support signature spoofing? Would like to use microG, hate gapps..
Thanks!
Click to expand...
Click to collapse
Sorry for late reply, i didnt try to use signature spoofing, but looking at sources and commits, it should have signature spoofing enabled
Paolo83 said:
Hi to all. Before wipe my data, what advantage has this rom on daily use compared with pixel edition?
Click to expand...
Click to collapse
It has more customization, and no gapps, so you can install the gapps package you want.
Also, if anyone is facing battery drain, its because of screen off fod, you can disable it by using the setedit app and edit the "screen_off_udfps_enabled" to 0
Thanks for the tip @Paolo83
IEATMILKA said:
Also, if anyone is facing battery drain, its because of screen off fod, you can disable it by using the setedit app and edit the "screen_off_udfps_enabled" to 0
Click to expand...
Click to collapse
It Is my idea
Paolo83 said:
It Is my idea
Click to expand...
Click to collapse
Didnt know your name on here, catched it from TG, i credited you
Why not sideload Magisk
E: signature verification failed
E: error 21
Installation aborted.
Click to expand...
Click to collapse
inae25 said:
Why not sideload Magisk
Click to expand...
Click to collapse
You need to install magisk apk and patch boot.img, then flash boot.img to have root
KamiKaonashi said:
Sorry for late reply, i didnt try to use signature spoofing, but looking at sources and commits, it should have signature spoofing enabled
Click to expand...
Click to collapse
Great! I'll download and flash... Thanks!
23rd June 2022
Update:
New Gapps Version (vanilla not updated for now)
rebased device tree for further optimizations
upstreamed kernel
minimal gapps included, since more people wanted it
click here to download Gapps Version
Hello. I don't know if it's appropriate to ask the question here in this section, but I'd like to know if the ROM is going to have continuous maintenance since I'm thinking of installing it... Thank you very much.
nano122105 said:
Hello. I don't know if it's appropriate to ask the question here in this section, but I'd like to know if the ROM is going to have continuous maintenance since I'm thinking of installing it... Thank you very much.
Click to expand...
Click to collapse
I will maintain as long as possible