Im trying to fix my phone out of a what it looks like a write protected or freezed state, you can watch more here http://forum.xda-developers.com/moto-g-2014/help/phone-write-protected-freezed-t3030812 , and wonder if its posible to modify an original rom such as Blur_Version.21.11.17.titan_retuaws.retuaws.en.US to just look for watever i had instaled on my phone and ignore it and keep on going with the installation instead of aborting it?
Because most roms i try to install via original recovery via sideload , the either give me the fingerprint error expecting the phone to have another system installed, or they just simply abort the instalation.
This is for a xt1063.
And by modify an original i mean to modify it and repack it again to be able to use it on the original recovery, not on twrp or philz or fastboot, as i have tried that several times.
Thanks for your time and posible help
abispac said:
Im trying to fix my phone out of a what it looks like a write protected or freezed state, you can watch more here http://forum.xda-developers.com/moto-g-2014/help/phone-write-protected-freezed-t3030812 , and wonder if its posible to modify an original rom such as Blur_Version.21.11.17.titan_retuaws.retuaws.en.US to just look for watever i had instaled on my phone and ignore it and keep on going with the installation instead of aborting it?
Because most roms i try to install via original recovery via sideload , the either give me the fingerprint error expecting the phone to have another system installed, or they just simply abort the instalation.
This is for a xt1063.
And by modify an original i mean to modify it and repack it again to be able to use it on the original recovery, not on twrp or philz or fastboot, as i have tried that several times.
Thanks for your time and posible help
Click to expand...
Click to collapse
I dont know if a OTA.zip can be modified but, say it can and we get it to attempt to flash- 1) have you any idea what is wrong / corrupt in 1st place and if like you/me/others believe its corrupted / write protected as a OTA zip flashes along same way as ADB and TWRP - it will most likely fail
Also you misunderstand that a OTA.zip is only a update and not full firmware..... it merges with older firmware - it does not replace / wipe it just updates apps / files to newer versions .
So you need to do a full firmware flash with wipe but you say this fails??
if you tell me what firmware you have on or want to go back - i will try to download and make a easy installer for you.
but i'm thinking corrupt partition needed linux to fix / wip or format
thanks for your reply, then will close this and continue with help on my other topic,thanks again.
wrong place
Hi, I think i've kinda bricked my honor 5C (nem-l51), and I really need help :
A few years ago I rooted my phone to make otg work.
It worked a little while, but then a system update came up, could not update because of the twrp, so I tried to unroot it (from supersu) to do the update, and the twrp stayed after the unroot.
I stayed with the phone like this, twrp installed and update pending (still trying to install the update from time to time) and then I had to use OTG again and tried to re-root my phone.
I tried to flash the supersu files I used the first time, but, even when the flashing worked, I couldn't see the supersu app on the phone, still unrooted.
Then I tried to change the twrp (via fastboot) and I realised that I couldn't : I get the "command not allowed" failure when the recovery should get written. I tried with numerous twrp versions, and stock recovery.
So my twrp right now is the twrp-3.1.1-0-venus "OpenKirin edition" one.
The phone says it's unlocked and the frp is locked, but I can't remember if it was already the case or not when I first rooted.
I unfortunately don't have anymore the bootloader unlock code that huawai gave me originally. I have no idea how to get it again, to try to re-lock/unlock the bootloader.
Back then when I first rooted my phone, I made a back up, so I tried to restore that back up. It failed, first with "cannot wipe the cust partition". Then I tried to restore without restoring the cust partition, and I got "extracttarfork() process ended with error 255" while the system was restoring.
After that, the phone wouldn't boot into android anymore. It would be stuck at the unlocked bootloader warning message and then reboot after a few minutes.
So, lastly, I tried to install the unofficial lineageOS port from here : https://forum.xda-developers.com/honor-5c/development/rom-lineageos-14-1-honor-5c-t3713911 with my twrp.
The installation went well, but the phone is stuck while first booting in lineageOS (I let it overnight, restarted it, re-installed it, tried with the first release, nothing).
TL;DR: My phone isn't booting and I can't flash any new recovery.
Please, help me to get my phone working again
Give me the
old build number on emui
Update build you received..
Twrp working?
Fastboot?
Erecovery?
I got access to erecovery, even if the "download latest version and recovery" doesn't work. (erecovery connects to wifi, and the first thing it tries to check/download fails)
I can boot into fastboot but can't flash recovery from there because of the command not allowed problem.
I can boot into twrp, but the back up I tried to restore and the lineageos rom I tried to install both failed, so maybe the twrp has a problem?
I'm sorry I'm not sure about the build number, I'm pretty sure I was on EMUI 5.0 and android 7.x, and I think I remember comparing current build number vs the update, and it was something like B350 or B351 for the current, and B355 or B375 for the update.
I've found this in my backup file 'recovery.log' ro.omni.version=6.0.1-20160703-nemo-HOMEMADE and ro.build.id=MOB30M . So, that mean that I had android 6.x when I did the backup, way back at the beginning.
I thought the update never got installed because each time the phone would reboot to complete installation, it would reboot into twrp. But I've still updated from android 6 to android 7 somehow ?
NEM-L51C432 or NEM-L51C10 ?
NEM-L51C432 and I'm sure of that ^^
Zhyrclew said:
NEM-L51C432 and I'm sure of that ^^
Click to expand...
Click to collapse
Flash this via twrp
http://update.hicloud.com:8180/TDS/...-L51_hw_eu/update_data_full_NEM-L51_hw_eu.zip
Once done, boot to twrp and flash this
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1581/g104/v82938/f1/full/update.zip
Reboot.
If you are unable to flash the 2nd link then just use the dload method to flash this. If you are not aware of dload method, link is given in my signature.
Note, this 2nd firmware will replace your twrp with stock recovery. You should boot to b350 version and it will be full stock. Reason for flashing data file first is it doesn't replace the recovery to stock but just flashes your data, settings, apps. And 2nd link is main full firmware which will replace your boot, recovery, vendor everything and should boot.
Good luck
I flashed the first one, no error.
The second one had multiple errors :
"[...]
write radio image...
32k crc checked failure
E:unknown command [errno]
update_huawai_pkg_from_ota_zip: update package from zip failed
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/update.zip'
Updating partition details...
...done
"
So I tried the dload method, and the installation started and ended at 5% with this error :
"Software install failed!
Incompatibility with current version.
Please download the correct update package."
I guess it's because I couldn't tell you the exact build number, I'm sorry for not taking note of it.
If there is a way for me to get the build number despite the status of the phone, i'm ready to do it.
If not, I'm ready to try as many versions as it takes to find the good one.
PS: I've still access to the twrp, thank god ! That was my biggest fear, because I can't flash any recovery in the current state.
Zhyrclew said:
I flashed the first one, no error.
The second one had multiple errors :
"[...]
write radio image...
32k crc checked failure
E:unknown command [errno]
update_huawai_pkg_from_ota_zip: update package from zip failed
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/update.zip'
Updating partition details...
...done
"
So I tried the dload method, and the installation started and ended at 5% with this error :
"Software install failed!
Incompatibility with current version.
Please download the correct update package."
I guess it's because I couldn't tell you the exact build number, I'm sorry for not taking note of it.
If there is a way for me to get the build number despite the status of the phone, i'm ready to do it.
If not, I'm ready to try as many versions as it takes to find the good one.
PS: I've still access to the twrp, thank god ! That was my biggest fear, because I can't flash any recovery in the current state.
Click to expand...
Click to collapse
You may try other higher versions like 360, 370 etc and see your luck. Twrp will be replaced only if the installation os successful for the main firmware. Its just a trial and error for you now but I am 99% sure you should be able to revive the phone via dload method
Thank you, it's reassuring. I will not give up until I test all the versions ^^
Could you help me a little bit to find other versions, please ? The only place I know where there is update packages for my phone is there : https://forum.xda-developers.com/ho...lota-upgrade-packages-models-nem-l51-t3473110 and there is only two versions.
Zhyrclew said:
Thank you, it's reassuring. I will not give up until I test all the versions ^^
Could you help me a little bit to find other versions, please ? The only place I know where there is update packages for my phone is there : https://forum.xda-developers.com/ho...lota-upgrade-packages-models-nem-l51-t3473110 and there is only two versions.
Click to expand...
Click to collapse
Firmware finder website
Wow, thank you, I downloaded the firmware finder software, it has everything.
Should I flash the firmware in two steps like you first made me, or should I just try with only the dload method with the fullOTA firmware ?
Zhyrclew said:
Wow, thank you, I downloaded the firmware finder software, it has everything.
Should I flash the firmware in two steps like you first made me, or should I just try with only the dload method with the fullOTA firmware ?
Click to expand...
Click to collapse
Check dload guide in my signature. You can follow that now. Good luck
I tried b355, b361, b375, b377, nothing changes, same error.
I noticed that I have something related to an update in my sd card AND internal storage->HwOUC->140783->( update.zip[1.32GB], update_data_full_public.zip[344MB], update_full_NEM-L51_hw_eu.zip[412MB] )
I don't know whether these files were there before I did all these attempted updates.
Could it be that my phone is not trying to install the files I put in sdcard->dload, because he finds these files in the internal memory first, and each time try to install these ?
Should I delete them, move them, unzip them in dload folder ?
Zhyrclew said:
I tried b355, b361, b375, b377, nothing changes, same error.
I noticed that I have something related to an update in my sd card AND internal storage->HwOUC->140783->( update.zip[1.32GB], update_data_full_public.zip[344MB], update_full_NEM-L51_hw_eu.zip[412MB] )
I don't know whether these files were there before I did all these attempted updates.
Could it be that my phone is not trying to install the files I put in sdcard->dload, because he finds these files in the internal memory first, and each time try to install these ?
Should I delete them, move them, unzip them in dload folder ?
Click to expand...
Click to collapse
Copy them on PC and then try dload of files you downloaded from Firmware finder website.
These are files your phone downloaded for OTA update but as you were on twrp, they never installed it amd stays there
I copied the updates my phone downloaded on PC and then deleted them both on internal storage and sd card.
Then I tried dload method with b355,b375&b377 from firmware finder, and also with the update.zip I found in the updates my phone downloaded.
Nothing worked, all of them got the error "Incompatibility with current version. Please download the correct update package."
Should I try even more firmware versions, or should I try something else ?
Btw, I noticed my phone, when connected to my PC, is labeled as huawei-P9-lite, and I don't think it was always like that, but it's probably just because the twrp-3.1.1-0-venus.img is originally for the P9 lite.
I came accross this thread, where somebody recommends to flash stuff from fastboot.
I have not tried it yet, I only tried to flash recovery from fastboot, and it is failing with the "command not allowed". But maybe I could try to flash some other things ? Any advice ?
For now, despite all my attempts to install stock OTA via dload method, the phone is still trying to boot into lineageOS, and failing.
I came across the "current" firmware version with a check with DC-unlocker : "NEM-L51C432B120"
So I downloaded full OTA firmware b120 on firmware finder software, and the dload method worked !
The installation went well, and after a few minutes of the first boot, I got into phone configuration.
I have one last problem, though : the phone configuration is looping.
There is only 4 languages to choose, so I have to choose english(US), then there is a weird list of countries, none in the EU, where I feel i have to choose united states, then after some steps I have to register to huawei ID thing.
If I try to skip it, it loops to the language selection.
If I try to log in to my original account, it says "device not supported for your location" and then loops to languages. (my original account is in french/France)
If I try to create a new account with new address mail, it works but then at the end says again that "device not supported for your location" and then loops to languages.
I tried with other countries it still loops.
The other languages seems to be Chinese and Japanese, but the configuration is looping too if I choose them.
I tried with/without sim, with/without wifi connected...
Dload the next firmware now and see if it works. Then set the phone
I downloaded and installed with dload method (by removing sd card and copying directly on it the files, because I don't know how to have access to the phone internal & external memory now) the next firmware (b130 version)
The phone booted, it launched a "system optimization" that was a few minutes long, and then the EMUI configuration poped up and looped through language selection, region(country), wifi connection (successful), terms and conditions, and WLAN+(switch between wlan and mobile data automatically).
I feel like the phone is working, the notification led is even blinking when I receive sms, but I have access to nothing because of this damned configuration.
Note: the connection to huawei ID isn't prompted again in the loop once I log in, from the original or the new account. In order to be prompted again to log in to the huawei ID, I have to go to erecovery and reset to factory the phone.
**URGENT** i have my p20 pro 6/128 with 9.0 last version ROOTED somehow i found a article.. the root was success. Tried to flash official twrp with twrp app and then everything was like HELL.
If i let my phone boot says error! func no: 10 boot image. error no :2 load failed. i faced something simillar when trying to get into recovery sometimes.
I can get into erecovery cant format or download official firmware. I can get into fastboot, download mode. I am gonna tell you everything . every program i tried AND FAILED!
TRIED: multi tool for huawei ( i download a version i think its 165 something when i press flash selected the program closed)
TRIED: to FLASH like 10 times ramdisks, recoverys, CANT FIND BOOT.IMG.
TRIED: Re-flash 9.0 says missing zip files THATS IMPOSIMPLE NOTHING IS MISSING I AM SURE
TRIED: a guide that said to download firmware and i would find a folder named DLOAD. i did everything. COULDNT FLASH SOMETHING ON DOWNLOAD SAYS ERROR
TRIED: ALMOST EVERYTHING
PLEASE HELP ME, HOW TO FIX IT? its very important for me and for everyone who is facing the same problem
Phone infos From Multi tool program http://prntscr.com/min398
and the firmwares i tried 1) http://prntscr.com/min3tn
2) http://prntscr.com/min40j
SEE SOME POSTS BELLOW TO SEE HOW I FIXED IT SUCCESS AFTER MANY ERRORS
1 found this post, and flashed all of them BUT there is not ramdisk on the files. i looked on two different firmwares which should i flash over ramdisk which doesnt exist?
first i run the command fastboot flash kernel kernel.img and i could boot into TWRP for first time. now i cant.
there are not errors for now. only if i boot my phone says phone keeping booting.
when i got to twrp and tried to reboot into system said there is no OS.
How and which os i should flash? since Multi tool program kicks me
HELP
https://forum.xda-developers.com/honor-9/help/help-softbricked-h9-oreo-t3750282
So you're typing a little erratic.
Can you get to eRecovery? This is your best option..
If not then you'll need to reflash all the parts of the OS back to the phone manually..
Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
dladz said:
So you're typing a little erratic.
Can you get to eRecovery? This is your best option..
If not then you'll need to reflash all the parts of the OS back to the phone manually..
Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
Click to expand...
Click to collapse
i can get into erecovery i cannot download the official and flash it throught there says error.. what else i can do
I cant understand what yyou saying here Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
I get into Erecovery if i press download latest version and recovery after some times when i put the wifi pass says error. Error i got also on HIsUite when i tried to format from there and download the latest versio. So we go manually but HOW? i tried almost everything
i tried this https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
success all command went trhough the phone
the problem is i cannot flash twrp
my phone has unlocked bl
well i did a lot of search if you ask me i download 5-7 different programs that can flash stock firmware. ONE seems to be legit for 9.0 RE-flash 9.0 which has commands on its script like this guy says and he helped me too
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
also if someone cant boot into twrp after the frist steps and see the erecovery just format everything from erecovery and then it will boot to twrp.
also now says installing update.
i hope imeis serial numbers etc wont lost..
Thats the script i found i dont remeber where
http://prntscr.com/mitvum
but i can upload somewhere the files
if you run FLASH.bat and says MISSING ZIPS then remove the update."zip" {ZIP PREFIX FROM THE NAME OF THE FILES ONLY} and run again the bat
the procedure may take 10-30 mins
What about the otg method?
Also I would never use a tool like this.
StonebridgeGr said:
**URGENT** i have my p20 pro 6/128 with 9.0 last version ROOTED somehow i found a article.. the root was success. Tried to flash official twrp with twrp app and then everything was like HELL.
If i let my phone boot says error! func no: 10 boot image. error no :2 load failed. i faced something simillar when trying to get into recovery sometimes.
I can get into erecovery cant format or download official firmware. I can get into fastboot, download mode. I am gonna tell you everything . every program i tried AND FAILED!
TRIED: multi tool for huawei ( i download a version i think its 165 something when i press flash selected the program closed)
TRIED: to FLASH like 10 times ramdisks, recoverys, CANT FIND BOOT.IMG.
TRIED: Re-flash 9.0 says missing zip files THATS IMPOSIMPLE NOTHING IS MISSING I AM SURE
TRIED: a guide that said to download firmware and i would find a folder named DLOAD. i did everything. COULDNT FLASH SOMETHING ON DOWNLOAD SAYS ERROR
TRIED: ALMOST EVERYTHING
PLEASE HELP ME, HOW TO FIX IT? its very important for me and for everyone who is facing the same problem
Phone infos From Multi tool program http://prntscr.com/min398
and the firmwares i tried 1) http://prntscr.com/min3tn
2) http://prntscr.com/min40j
SEE SOME POSTS BELLOW TO SEE HOW I FIXED IT SUCCESS AFTER MANY ERRORS
Click to expand...
Click to collapse
dladz said:
What about the otg method?
Also I would never use a tool like this.
Click to expand...
Click to collapse
like i said in the first post the otg method with the dload folder failed.
Why you wouldnt try it?
StonebridgeGr said:
like i said in the first post the otg method with the dload folder failed.
Why you wouldnt try it?
Click to expand...
Click to collapse
Because I've got no need to mate, manual is always safer.
Have you asked in the thread where you got the tool?
I'm not sure what else to suggest pal
dladz said:
Because I've got no need to mate, manual is always safer.
Have you asked in the thread where you got the tool?
I'm not sure what else to suggest pal
Click to expand...
Click to collapse
now everything is fine but i cant root..
StonebridgeGr said:
now everything is fine but i cant root..
Click to expand...
Click to collapse
Everything is fine? What did you do?
With root Judy follow the instructions that have worked for other people. Don't rush things.
dladz said:
Everything is fine? What did you do?
With root Judy follow the instructions that have worked for other people. Don't rush things.
Click to expand...
Click to collapse
i post i early post a link that helped me a little bit i think i edited the .bat script
also i made a video and post about rooting and everything is fine.
the problem is you can have twrp and magisk root both:/
either you have root and not twrp or either you have twrp and not root
I have installed Lineage OS 18 Android 11 Rom from below thread,
https://forum.xda-developers.com/realme-x2-pro/development/rom-lineageos-18-0-realme-x2-pro-t4177291
I have used the OrangFox R11 Recovery for the installation.
Now I can not go back to stock C.33 firmware. I have tried installing OZIP both with TWRP and OrangeFox but no luck so far. Whenever the installation completes and I reboot the device, it shows boot/recovery damaged error message.
I have tried OZIP installation followed by vbmeta.img flashing as well. But no luck. Still the same error message.
I have tried flashing fastboot rom with all files (but no recovery img was inside) as well but still the same error.
I have tried RealMe Flash Tool with Firmware OFP but still the same error.
I'm simply stuck on this LineagOS 18 rom and I badly wanna go back to the Stock rom. :crying:
Please help!
P.S : If this thread needs to be moved somewhere elsle please be kind enough to do so. I'm not so familiar with thread openings. Sorry about it. :fingers-crossed:
Format data after flashing Ozip thats important . try that with twrp
Anask3444 said:
Format data after flashing Ozip thats important . try that with twrp
Click to expand...
Click to collapse
Already tried bro.. no luck
ImperoDroider said:
Already tried bro.. no luck
Click to expand...
Click to collapse
Did you try the fastboot flashable images?
https://forum.xda-developers.com/re...ock-fastboot-flashable-images-realme-t4003107
ImperoDroider said:
I have installed Lineage OS 18 Android 11 Rom from below thread,
https://forum.xda-developers.com/realme-x2-pro/development/rom-lineageos-18-0-realme-x2-pro-t4177291
I have used the OrangFox R11 Recovery for the installation.
Now I can not go back to stock C.33 firmware. I have tried installing OZIP both with TWRP and OrangeFox but no luck so far. Whenever the installation completes and I reboot the device, it shows boot/recovery damaged error message.
I have tried OZIP installation followed by vbmeta.img flashing as well. But no luck. Still the same error message.
I have tried flashing fastboot rom with all files (but no recovery img was inside) as well but still the same error.
I have tried RealMe Flash Tool with Firmware OFP but still the same error.
I'm simply stuck on this LineagOS 18 rom and I badly wanna go back to the Stock rom. :crying:
Please help!
P.S : If this thread needs to be moved somewhere elsle please be kind enough to do so. I'm not so familiar with thread openings. Sorry about it. :fingers-crossed:
Click to expand...
Click to collapse
If it says "boot/recovery damaged" and you're still able to use your phone, you should consider yourself lucky. I had to send mine in warranty for repair. I too am trying to go back to stock ROM after installing LOS 18.
Schumanzuar said:
Did you try the fastboot flashable images?
https://forum.xda-developers.com/re...ock-fastboot-flashable-images-realme-t4003107
Click to expand...
Click to collapse
These images have bricked my phone! Error message:
The current image(boot/recovery) have been destroyed and can not boot.
Please flash the correct image or contact customer service to fix it.
Tried flashing TWRP, no luck. Cannot boot.
do you have flash again the vbmeta.bin
I do that and after the rom start again for me
rpfe26 said:
do you have flash again the vbmeta.bin
I do that and after the rom start again for me
Click to expand...
Click to collapse
I didn't try that, however I did manage to get my phone up and working again after having destroyed the boot/recovery
I used Realme Flash Tool in combination with TWRP to get the phone up and running.
ImperoDroider said:
I have installed Lineage OS 18 Android 11 Rom from below thread,
https://forum.xda-developers.com/realme-x2-pro/development/rom-lineageos-18-0-realme-x2-pro-t4177291
I have used the OrangFox R11 Recovery for the installation.
Now I can not go back to stock C.33 firmware. I have tried installing OZIP both with TWRP and OrangeFox but no luck so far. Whenever the installation completes and I reboot the device, it shows boot/recovery damaged error message.
I have tried OZIP installation followed by vbmeta.img flashing as well. But no luck. Still the same error message.
I have tried flashing fastboot rom with all files (but no recovery img was inside) as well but still the same error.
I have tried RealMe Flash Tool with Firmware OFP but still the same error.
I'm simply stuck on this LineagOS 18 rom and I badly wanna go back to the Stock rom. :crying:
Please help!
P.S : If this thread needs to be moved somewhere elsle please be kind enough to do so. I'm not so familiar with thread openings. Sorry about it. :fingers-crossed:
Click to expand...
Click to collapse
I managed to get my phone up and running. Did you manage to get yours?
Milan-XDA said:
I managed to get my phone up and running. Did you manage to get yours?
Click to expand...
Click to collapse
You mean you got it back to stock from lineage os 18 by flashing through realme flash tool?
adimegarocker said:
You mean you got it back to stock from lineage os 18 by flashing through realme flash tool?
Click to expand...
Click to collapse
Yes, that is correct.