Related
Hi all just a question . HTC m7ul s-on tried to restore device to stock with a help of xda guide ...but now I get to bootloader and can move with volume up-dowm button but power button won't select anything ...power button works to power on device but just sits on a white htc screen for a minute then screen goes off ....when connect to laptop the laptop see the phone as a ZEUS FLASH DEVICE
Is my phone dead or can I revive it
Thanks
leegreggs said:
Hi all just a question . HTC m7ul s-on tried to restore device to stock with a help of xda guide ...but now I get to bootloader and can move with volume up-dowm button but power button won't select anything ...power button works to power on device but just sits on a white htc screen for a minute then screen goes off ....when connect to laptop the laptop see the phone as a ZEUS FLASH DEVICE
Is my phone dead or can I revive it
Thanks
Click to expand...
Click to collapse
Your phone being detected as a "zeus flash device" is for sure a drivers issue. Try to uninstall anything related to whaterver "zeus" is from your computer and then install the latest HTC drivers, boot the phone in bootloader / fastboot usb mode and post the output of "fastboot getvar all".
Hi I can't get into fastboot mode . as when I boot into bootloader with power and volume down , I can move through items with volume button but when I press power button to select fastboot nothing happens its as if the bootloader freezes , I have to hold vol up and power to turn off then get into bootloader again but still power button not working in bootloder but works to get in to bootloader
EDIT: I got to fastboot mode finally, just by trying different USB cable... (am I dumb? yes. really.) I'm sorry for wasting everyone's time that tried to help me!
I tried to install xposed via TWRP, and after that I got stuck in a bootloop, then I tried to install something in panic in twrp in order to fix my phone, and then when I was about to boot, it said "No OS installed are you sure you want to reboot?" I tapped Yes. Now I can't access my recovery mode anymore.
I haven't installed fastboot on my phone or whatever (dont know does it have to be installed to get access to it) but when I try the button combination I'm not accessing the fastboot mode.
I'm stuck in a screen where it says 'Your device has been unlocked and can't be trusted" and in the bottom is says "Your device is booting now..." and does nothing.
Please I really need help, I paid for my phone 300 euros and have had it only like month... also i'm addicted to pokemon go and my p9-lite is the only device I could play it with, and my family isn't the richest one and I can't buy a new one in like a year
)
To access fastboot mode. Make sure the phone is off. Press and hold vol down and insert USB cable. That should bring you to fastboot mode.
n0my said:
To access fastboot mode. Make sure the phone is off. Press and hold vol down and insert USB cable. That should bring you to fastboot mode.
Click to expand...
Click to collapse
not working, just brings me to the same screen where it says "your device has been unlocked and can't be trusted"
what about 3 button combination???
Hold vol- ;vol+ and power button, when huawei logo appers realise power button.
Sugestion. Dont mess with TWRP and zips if u dont know what are u installing.
P.S. DC phoenix can fix your phone, but it cost 15 EUR and u should be able to acced fastboot.
Sent from my EVA-L19 using XDA-Developers mobile app
the 3 button combination doesn't work either.. also DC phoenix won't put me in fastboot right? as I've searched online about it.
And I won't mess with twrp ever again when I get my phone back.
Karibu0 said:
not working, just brings me to the same screen where it says "your device has been unlocked and can't be trusted"
Click to expand...
Click to collapse
connect cable with pc, then connect with phone, only then press volume down and powerbutton about 15 sec, so phone force restart, keep holding vol down. need to be in fastboot mode, if are not ,then its done for you!
Arnys said:
connect cable with pc, then connect with phone, only then press volume down and powerbutton about 15 sec, so phone force restart, keep holding vol down. need to be in fastboot mode, if are not ,then its done for you!
Click to expand...
Click to collapse
well...... I guess my phone is 'done' then
Is there any other ways to install the firmware than fastboot? like some kind of tool on pc so it forces the install and your phone doesn't have to be in fastboot or anything?
Finally got to fastboot mode, just by trying different USB cable... (am I dumb? yes.) I'm sorry for wasting everybody's time!
I'm never gonna do any modding to my phone ever again
Hi, I have a problem with my p9 too. I can't access fastboot or recovery mode. The phone stays on black screen, no led. When i pluged it on usb, he is detected but as "USB SER". How can i do to reflash ?
My P9 have problem who help me......plssss
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
I have exactly the same issue. With identical error codes. Still trying to work out a solution.
on the Huawei website, the had a bootloader.img installer for older models but none for the p10/ p10 plus
Any advice would be appreciated
Let phone completely discharge even it power off automatically. Then put the phone on the charging it will boot up to system then go to settings >advanced settings>back up&reset> reset all settings
when it boot i cant see anything except black . i can only turn off or volume.
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Blackball said:
Connect with pc and press power and vol-
It should boot into fastboot. You got the error cause wrong or broken recovery.
Click to expand...
Click to collapse
it doenst work , i tried all combination. it always go to error when i tried. is it possible that some flash box could fix?
I never heard that someone killed his fastboot. Press longer the vol -
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
rosarioglen18 said:
hi, did you already fixed your phone? I got the problem same as you, I have the device Huawei P10 VTR-L29.. I hope you can help me if you fixed it.. thanks,
Click to expand...
Click to collapse
sadly , i havent found any solution yet. sorry . i also wish to fix it
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
DallasCZ said:
https://forum.xda-developers.com/p10/how-to/guide-unbricking-p10-using-hwota-windows-t3714416
or try this:
http://huafan.cz/discussion/4218/ro...ei-p10-a-postup-instalacie-do-telefonu#latest
it is in lsovakia language so use google translator.
Click to expand...
Click to collapse
thank you ,unfortunately it not possible to go to fastboot mode, when the phone on error state. pc also not detect. i apreciate the help.
1-the second link i posted is about to flash service stock firmware trough force update (vol+,vol-,power). have you tried?
2-what the phone does when you try to start the fastboot mode (connect with pc, turn phone off, turn phone on with vol- and power)?
3-what is your model number L09CxxxBxxx?
I have sam problem last 3 days and i cannot solwed
solution
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
p10 no recovery
franmasco said:
Hi, I was able to solve it in this way.
Let the phone download 0% battery
connect it to the PC, pressing Vol - & power.
The phone will enter fastboot.
flashing the stock recovery
put the System in an SD and press vol + .vol - y pwr.
The phone will update and will light normally.
Click to expand...
Click to collapse
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
---------- Post added at 10:21 AM ---------- Previous post was at 10:09 AM ----------
fresigi said:
good morning guys I'm new, I have the same problem with huwei p10, unfortunately, eliminating supesu I deleted everything, now no longer works anything, ne adb ,, ne dload ,, can you help me? cel has 3 months of life ,,,
Click to expand...
Click to collapse
ps,,the model and VTR-L09 EUROPE, IF USE DLOAD, IS 5% BLOCK
p10 no recovery
Bunnydollies said:
Hi, I have P10 VTRL09 .. A couple days ago i did relock bootloader and now i can not enter my phone.it stuck at Error mode.
I tried almost every method but it always comes back to error mode. I discharge the batterry and charge, if I am lucky, sometimes it will boot into the system but it will black out. I can not do anything except turn off, but while it was in this stage, i could connect to pc and get detected. pc try to install MTP driver but it also failed. I tried command in adb, it also failed (waiting for devices) ....
Issues :
1.boot loader locked
2.no recovery ( can not be load )
3.can not enter fastboot
4.can not force update
5.PC not detect
Question : Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.[/QUOTE]
fresigi said:
Is there a way to make my phone go to fastboot ? so i can relock bootloader with adb and flash new firmware.
i appreciate all the help...please help me.
Click to expand...
Click to collapse
[/QUOTE]
Hi, I was having the same problem. Mate 8 EMUI 8.
After looking everywhere and trying all the options available, I wasnt able to resolve.
Finally, I tried FunkyHuawei and got my system back through eRecovery.
Gave them the readings like version no. , build no...etc through fastboot. The required info is on their site. They then reverted with a link of the firmware which I flashed through their FuHunbrick tool. It force updates the entire full last version.
After flashing and booting, the system didnt boot but was able to go to eRecovery and restored my previous version.
If you or anyone else stuck at this error, they can try at their own risk as they dont guarantee anything.
Edit: you should and will be able to boot into fastboot once the battery is totally down and phone shuts off completely. Just press volume down button and insert usb. Try again and again if it doesnt work first time.
Thanks.
Help
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
elchino!!! said:
First sorry for my English
I have a similar issue:
Huawei P10 Lite
I managed to install TWRP, but when I did that I lost the OTA upgrades, then I tried to install the stock recovery and then the phone doesn't start. It just stay on the first screen (the one with the Huawei logo) and it gets hot as hell. The combination of keys doesn't work, the power key just reboot and gets back to the logo screen. I need your help guys, the phone is 3 month old. Thanks
Click to expand...
Click to collapse
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
apat26 said:
Hi, let the phone battery dry out totally first. Totally. It should not vibrate at all when you press power button. Leave for a couple of hours more.
Then recharge to 50℅ or more and restart and see if you get to eRecovery or other options.
Are you getting any error screen after logo?
You will definitely get to fastboot by pressing volume down button and inserting usb. Try again n again.
Click to expand...
Click to collapse
Hi. I did the battery part and the part of the pressing the vol - is and connecting to pc. It started but didn't got into fastboot or bootloader, just turned on normally and then I ran the adb command "adb reboot recovery" and I had to do the battery part again. I am afraid to run "adb reboot bootloader" because the risks of the draining out the battery. I mean my phone does not enter into recovery.
1. I have successfully requested and unlocked my 4x.
2. I wanted to install: https://forum.xda-developers.com/xiaomi-redmi-4x/development/rom-2017-08-07lineage-14-1-t3653016
3. First step, install TWRP following this: https://twrp.me/xiaomi/xiaomiredmi4x.html (Fastboot Install Method (No Root Required)
3a. Using version: twrp-3.2.1-0-santoni.img as downloaded from the twrp site
3b. After many reboots and tries, finally get into TWRP. Password not accepted at first, press cancel, get to TWRP menu.
3c. Wipe->Advanced Wipe->System,Cache,Dalvik's/Art cache. Swipe, then get errors. Try again, errors. Press reboot option.
4. 4x OS will not boot. It is stuck in endless cycle of Mi logo, and recovery/TWRP boot (vol+ and power) does not work. Only way to break Mi logo is fastboot (vol- and power).
5. Try to reset phone so I can start entire process (starting at 2) all over again following this: http://en.miui.com/a-234.html
5a. Used this version: http://update.miui.com/updates/v1/fullromdownload.php?d=mido_global&b=X&r=global&n=
5b: Edited the flash_all.bat following this: https://www.youtube.com/watch?v=_osMF9EubhI
5c. Left fastboot mode, device will not power on at all.
And as I type this I realize I put on the "Note 4x" instead of the "4x" version. I should have used this version: http://update.miui.com/updates/v1/fullromdownload.php?d=santoni_global&b=F&r=global&n=
As a potential next step I've identified: http://en.miui.com/thread-693884-1-1.html
I need some expert guidance at this point. Thank you.
Recovery is both volume keys plus power.
Maybe you should reflash firmware as well(v32).
you can try it
download and install last version ADB https://dl.google.com/android/repository/platform-tools-latest-windows.zip
enter to TWRP both volume + power. after choose Advanced - ADB Side load .. run it
run command line on PC after: adb sideload /path/to/rom.zip
wait while rom will be installed... press Reboot to System (if TWRP don't reboot byself)
wait near 5-10 min for first time rom startmust work.
Olezka said:
enter to TWRP both volume + power. after choose Advanced - ADB Side load .. run it.
Click to expand...
Click to collapse
Kajuru said:
Recovery is both volume keys plus power.
Click to expand...
Click to collapse
I have gotten to recovery with just vol+. Regardless, the phone will not turn on from either combination.
vol+ and power ... have menu for reboot to Fastboot and Recovery .. choose it for reboot to TWRP and flash phone or in Fastboot and flash with Miflash
Olezka said:
vol+ and power ... have menu for reboot to Fastboot and Recovery .. choose it for reboot to TWRP and flash phone or in Fastboot and flash with Miflash
Click to expand...
Click to collapse
The phone will not turn on. Not to any menu. Not for any key combination.
zebra321 said:
The phone will not turn on. Not to any menu. Not for any key combination.
Click to expand...
Click to collapse
you know,, if you install twrp,, the combination key vol up+power cannot work,,, he work if you hold vol up+vol down+power until MI logo then realease.
This sounds a hard brick to me.
Every replies about Fastboot and Recovery are pointless, because he cannot start the phone in Fastboot.
either it's hard bricked or motherboard stopped working after the wrong flash.
i think you should give it try on test point method once as you have mentioned in this thread (do it on your risk) or you may have to visit service center since any button combination isn't working for you.
what is the status of device when connected to PC or on charge ? is it charging ? does led light blinks ?
I used the guide I posted in OP to fit it, though it wasn't easy. Gonna try lineageOS one more time. Thanks to all who tried to help.
I had this same. I saved my phone using this toturial:
and
http://en.miui.com/thread-693884-1-1.html
Be careful with the screen and sim tray!
My phone was 100% dead (no fastboot or recovery). I have tried everything before and only that works.
I have a moto X4 that after attempting FRP, the device was restarted, and after that it is in a loop, and no longer enters fastboot mode. What I've done: tested button, ok tested battery, ok What can I do now? only in the box to solve? if it is only in the box, umt solve?
Felipe9229 said:
I have a moto X4 that after attempting FRP, the device was restarted, and after that it is in a loop, and no longer enters fastboot mode. What I've done: tested button, ok tested battery, ok What can I do now? only in the box to solve? if it is only in the box, umt solve?
Click to expand...
Click to collapse
Hold volume down and power buttons until you see fastboot mode
Sent from my payton_sprout using XDA Labs
Hello Friend!! holding the power button and volume less, it did not enter fastboot at all. However, I held the Power button, volume less and connected it via the cable on the PC, so I managed to enter fastboot mode, and hard reset it, the device came back to life. thank you for the answer.