Related
View attachment 4567426
What is Project Treble:
Project Treble basically partitions your device into two separate partitions, a system and a vendor: system contains your generic system image, while vendor partition has your device specific files required for booting and running your phone. This way we can easily change the system image and be able to run our device on different system images with the same kernel and vendor partition
Read more about Project Treble
What's a GSI?:
A GSI literally means Generic System Image. It is a general system image meant for no specific device. Treble enabled devices have the capability to run a GSI. You can find a GSI here: Phh-Treble
ZTE Axon 7 hardware vs Treble implementation:
Our Axon 7 is an A-only device. This means that regarding the GSI images (GSI = Generic System Image) to be used, you need to get ARM64 and A-Only system images
What's Packaged in the zip:
A boot image (kernel)
A compressed vendor image (vendor)
Requirements:
- Unlock bootloader
- Installed patch EDL to add /vendor part. 800Mb
- Installed TWRP 3.2.1-8 - TREBLE
How to install:
- Format /system, /data and /cache, wipe /vendor
- Install Treble flashable zip package Project_Treble_v1.0-by-NFound
- Install GSI .img in /system part. How to flash a Generic System Image (GSI) on Project Treble supported devices
- Reboot
Alternative Instruction
Working:
Camera (and flashlight)
WiFi
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
Broken:
Encryption (format data or remove encryption when coming from a non-treble rom)
Sepolicy is still permissive
Nothing else? Otherwise please report it!
Download:
- TWRP 3.2.1-8 TREBLE
- AXON7_GPT_ADD_VENDOR_800MB
- Project_Treble_v1.1-Axon7-by-NFound
Available GSI images is here
Android Pie Release 1 and other (video proof on Axon 7)
Fixes:
- More fixes for Treble ROM by @Kranoner
Credits:
@djkuz for add part. /vendor
@NFound for the fact that this dude did this for us real
Contributors:
@NFound
OS Version based: 8.X Oreo
ROM Kernel: Linux 3.18.71
ROM Firmware Required: Official BETA B12 Oreo
Version Information
Status: Testing
Source-Code Vendor
Created 2018-08-08
Last Updated 2018-08-12
Reserved
Thank you very much @NFound, i will test this asap. Does the gapps need to be flashed after install?
Waancho said:
Thank you very much @NFound, i will test this asap. Does the gapps need to be flashed after install?
Click to expand...
Click to collapse
Any ARM64 with opengapps.org for 8.x, in GSI 9.x Gapps included
Dear friends! Do not forget to backup before installation, this is a test version. It's time for me to sleep, write. As time will be, I will read your comments. If you find bugs - be sure to specify the version of GSI Android 8.x or 9.x
Thank you!
Hey need fast answer! In this guide is talking about a Vendor 8.1 and 8.0 and 8.0 does not work with this rom, so my question is does this rom support your treble? https://forum.xda-developers.com/pr...development/aosp-9-0-android-9-0-gsi-t3826357
Source code vendor blobs in OP
NFound said:
Source code vendor blobs in OP
Click to expand...
Click to collapse
I am a bit confused: how would non-standard hardware like our famous DAC be used in a treble ROM? Would the vendor partition make specific APIs available for such non-standard hardware?
Thank you for this. Maybe its a stupid question, but does the DAC properly function even when we install a GSI?
I have a feeling that a proper fully functional treble will make the other custom ROM thread for Axon 7 obsolete.
so no EDL needed? I'm so happy because i dont have a windowscomputer.
*edit: i think i did not read good and windows is still needed
Zobat said:
so no EDL needed? I'm so happy because i dont have a windowscomputer.
*edit: i think i did not read good and windows is still needed
Click to expand...
Click to collapse
You dont need a windows-pc. Only twrp
Do we need to install the project treble zip in the OP if we already enabled treble by EDL?
Let me see if I got this whole treble situation straight :cyclops:
I'm running the latest AEX but I assume this guide contains a more updated "treble" so to speak, is that correct? In order to try the GSI's do I need to follow this guide and wipe everything or will the next AEX release update treble and contain the new fixes?
https://sourceforge.net/projects/resurrectionremix-oreo/files/arm64aonly/
Arm64 and A only. Should be working right?
BaamAlex said:
You dont need a windows-pc. Only twrp
Click to expand...
Click to collapse
He DOES need a windows pc since in order to enable treble he needs to flash a file via EDL
troy5890 said:
Do we need to install the project treble zip in the OP if we already enabled treble by EDL?
Click to expand...
Click to collapse
You will need to install this again Project_Treble_v1.0-by-NFound
it contains bug fixes
bornlivedie said:
He DOES need a windows pc since in order to enable treble he needs to flash a file via EDL
Click to expand...
Click to collapse
For this zip here he dont need a PC. For the EDL package yes.
Just wanted to thank you and talk about my experience.
Converting the device to Treble was a breeze. Can be done in under 5 minutes with no issues at all. I'm currently running Android P PR1 with no major problems.
However, when trying to install the GSI (totally not related to your work, but wanted to comment on this so everyone can enjoy treble) I ran into a small problem (error 7) when flashing the POST sGSI zip files. I resolved this by doing the following:
Install the treble zip
Install the GSI
Install the treble zip again
Install the 3 zip files in order
This worked out fine for me.
Again, thanks a million times on your epic feat. This is no small task, and is very welcome. It marks a before and an after.
You, sir, are heaven-sent. Thank you for your good work.
bornlivedie said:
Install the treble zip
Install the GSI
Install the treble zip again
Install the 3 zip files in order
Click to expand...
Click to collapse
Why a second time?
Dear friends!
In the video I am used Release 1.
1. Flash Project Treble
2. Flash GSI
3. !!! In Mounting - UNMOUNT and MOUNT system and vendor!
4. Install patches 1,2,3
5. Reboot
Android Pie Release 1 (Download A-only and patches): https://androidfilehost.com/?w=files&flid=280192
Work GCam: https://github.com/AospExtended/platform_vendor_aosp/blob/8.1.x/prebuilt/common/apk/Gcam.apk
NOTICE: If during a call on Android 9 you do not hear the subscriber. (thx @atakan33 )
PS Here is another list of available GSI ROMs, use the translator!
9.x https://4pda.ru/forum/index.php?act=findpost&pid=75394613&anchor=Spoil-75394613-2
8.x https://4pda.ru/forum/index.php?act=findpost&pid=75394613&anchor=Spoil-75394613-3
Thank you!
About
I've found information about flashing GSI's on this phone to be fragmented so here's a collection of resources that have worked for me.
If you have any suggestions or issues with popular GSI ROMs, drop them here and I'll do my best to update the thread.
Note: This guide is for users who have already flashed custom ROMs (not necessarily GSI) to their phone. If you're new to this or are coming from any MIUI ROM, please see other tutorials.
Click to expand...
Click to collapse
GSI Installation
1. Flash TWRP
The current latest version (as of the time of writing v3.3.0) supports for flashing GSIs.
2. Update firmware (optional)
I'm currently using the latest global firmware (as of time of writing v10.2.2.0) which seems to work fine. Download the zip from xiaomifirmwareupdater and flash in TWRP.
3. Flash treble BOOT and VENDOR partitions
Download the below image files (source).
boot.img
vendor.img
Install the images by using the following command or optionally using TWRP.
Code:
fastboot flash boot boot.img
fastboot flash vendor vendor.img
4. Flash your GSI ROM
Pick a GSI from the Treble forum and be sure to download an ARM64 and A-Only variant. If the downloaded file is an archive (not an *.img file) you will need to extract the contents.
Go into TWRP
Copy the GSI image to your phone
Wipe "Dalvic/ART Cache", "Cache", "System" and "Data" paritions
Install the GSI image to the System Partition (Install -> Install Image -> yourimagefile.img - System Image)
Reboot back into TWRP
Resize the system partition (Wipe -> Advanced Wipe -> check System -> partition options -> Resize FS)
Install Magisk & OpenGapps (both optional)
GSI ROMs
Pixel Experience 9 (2019-03-24)
Source: XDA
Status: Working.
Additional info: Everything works as expected.
AospExtended v6.2 (20190313)
Source: aospextended
Status: Working.
Additional info: Everything works as expected.
Ressurection Remix v7 (19/04/16)
Source: XDA
Status: Unusable.
Additional info: Everything works aside from video playback (which creates a loud popping/static sound regardless of audio levels).
Has someone tried oui ??
Great guide! Thanks a lot, your way was the only way I could get a treble rom working on the device! I wasn't able to flash the vendor in fastboot coming from miui 10.2.2.0, but it worked from twrp. Now got Havoc booted successfully
has anyone tried q gsi?
xeodm said:
has anyone tried q gsi?
Click to expand...
Click to collapse
If you want to use it, try it out. There's no reason it shouldn't work ?
Anyone successfully flashed Android Q beta 5 GSI?
I tried my best, but it is not booting up!
djmanri3 said:
Has someone tried oui ??
Click to expand...
Click to collapse
I'm going to try it later. I will update if it works.
djmanri3 said:
Has someone tried oui ??
Click to expand...
Click to collapse
Unfortunately, it doesn't boot. I want to try it too !
salahmed said:
Anyone successfully flashed Android Q beta 5 GSI?
I tried my best, but it is not booting up!
Click to expand...
Click to collapse
I remember someone saying u need to use permissiver 3 or 4
gsser said:
I remember someone saying u need to use permissiver 3 or 4
Click to expand...
Click to collapse
Do you have a link?
Regards
salahmed said:
Do you have a link?
Regards
Click to expand...
Click to collapse
I dont have any unfortunately, it might be in erfano's telegram group or mix 2 aosp group.
I'm Stuck Help!
I'm stuck on AOSP EX Boot Animation, What to do now?
I did all right!!
Why is this happening
Fix for the audio problem
andythedev said:
About
I've found information about flashing GSI's on this phone to be fragmented so here's a collection of resources that have worked for me.
If you have any suggestions or issues with popular GSI ROMs, drop them here and I'll do my best to update the thread.
GSI Installation
1. Flash TWRP
The current latest version (as of the time of writing v3.3.0) supports for flashing GSIs.
2. Update firmware (optional)
I'm currently using the latest global firmware (as of time of writing v10.2.2.0) which seems to work fine. Download the zip from xiaomifirmwareupdater and flash in TWRP.
3. Flash treble BOOT and VENDOR partitions
Download the below image files (source).
boot.img
vendor.img
Install the images by using the following command or optionally using TWRP.
Code:
fastboot flash boot boot.img
fastboot flash vendor vendor.img
4. Flash your GSI ROM
Pick a GSI from the Treble forum and be sure to download an ARM64 and A-Only variant. If the downloaded file is an archive (not an *.img file) you will need to extract the contents.
Go into TWRP
Copy the GSI image to your phone
Wipe "Dalvic/ART Cache", "Cache", "System" and "Data" paritions
Install the GSI image to the System Partition (Install -> Install Image -> yourimagefile.img - System Image)
Reboot back into TWRP
Resize the system partition (Wipe -> Advanced Wipe -> check System -> partition options -> Resize FS)
Install Magisk & OpenGapps (both optional)
GSI ROMs
Pixel Experience 9 (2019-03-24)
Source: XDA
Status: Working.
Additional info: Everything works as expected.
AospExtended v6.2 (20190313)
Source: aospextended
Status: Working.
Additional info: Everything works as expected.
Ressurection Remix v7 (19/04/16)
Source: XDA
Status: Unusable.
Additional info: Everything works aside from video playback (which creates a loud popping/static sound regardless of audio levels).
Click to expand...
Click to collapse
https://github.com/hmuny99/GsiSystemAudioFix
Use this flashable zip to fix the audio stuttering issue.
Someone tried it with the Q GSI's from Erfan? I can't get it to work....
pattagalix said:
Someone tried it with the Q GSI's from Erfan? I can't get it to work....
Click to expand...
Click to collapse
Not with Efran's gsi's but I've tried a few times on other 10's and had no luck on my end. I Used the 10 gsi Aonly 64 bit and I've formatted data and decrypted using Zach's force encrypt removal zip and magisk su zip and I've tried without removing encryption and no luck. It hangs on mi boot logo every time. I saw a DerpFest gsi on telegram that's when this whole gsi mission began for me. lol. Maybe we need a different boot.img and vendor.img for 10 idk? ? I tried with and without flashing the boot and vendor, decrypt and not decrypt and no go. ?
Sent from my moto g(7) power using XDA Labs
I booted RR v7.03 from Luke's GSI thread using vendor and boot in op but tried a few more 10 GSIs and they either hang on mi screen or bootloop forever. This RR is bad ass!! V7.03 wasn't made for Chiron and blows 7.02 off the map. Although security patch is from November 2019 I'm going to rock it a while. Sure will miss RR now that main dev stopped. Talk about a bad ass ROM!!! If anyone wants to use it its here. Just click the top link and you'll see the A only 64
https://forum.xda-developers.com/pr...iscussion/gsi-expressluke-built-gsis-t4003457
Update 1 error " FBI message warning (lol) about the firmware and error 7"
---->Back to firmware v9.5.30
download it and install first
https://osdn.net/projects/xiaomifir...clover_miui_MIPAD4_9.5.30_4d4a04e318_8.1.zip/
--------------------------------------------------------------------------------------------
Update-2 -!!!! Cause Mokee TWRP not support (new GSI with Phh- :v114 ) decryption then You can't encrypt.
Use this step for new GSI with phh v114
1. Mokee TWRP v.3.3.1 --->TWRP-20190528-3.3.1.0-clover.img
https://share.weiyun.com/5VfERAy or https://mega.nz/#!QPgiDI6J!Urr3Drlwe...lp6UmBEb1v16pQ
2. Before firstboot from flashing must install Disable DM Verity ForceEncrypt
( https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_05.21.2019.zip)
Note After Mokee 9 Pie is updated to June 10th, the latest TWRP (TWRP-20190528-3.3.1.0-clover.img) cannot decrypt the data partition.
-----------------------------------------------------------------------------------------
Update-3
New installation.
0.Make F2FS Data Partition (Option)
1.Flash Firmware https://xiaomifirmwareupdater.com/#stable
2.Flash Vendor (mokee pie) https://mega.nz/#!JG4WxI7I!O4vr5eEcVXJUjbZ_jZBUE9Q9nDZ9tavRrT9JXDpql1Q
3.Flash System
4.Flash Disable DM Verity ( if you don't want encryption)
5.Reboot
-----------------------------------------------------------------------------------------
========================================================
Pre...
1. Download Latest Mokee TWRP 3.2.3_4 (not Twrp 3.3.1)
https://pan.baidu.com/s/1HgjIWw2WPd...rentPath=/sharelink3674761570-399175935519286
TWRP-20190117-3.2.3.0-4-clover.img
2. Download Base 9.x Treble supported ROM ( Mokee 9 nightly )
https://download.mokeedev.com/?device=clover
MK90.0-clover-2019-xx-xx-xxxx-NIGHTLY.zip
3. Download Android 9 Pie GSI ( system image file ) ----will make useful list later (after my finished testing)
General list here --- https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
How...
Base ROM supported ../Fingerprint /Forced Encryption / F2FS / Permissive mode SELinux
1. Clean Flash ROM (MK90.0-clover-2019-xx-xx-xxxx-NIGHTLY.zip)
do
1a [ Wipe--->Format Data ] + [ wipe---->Advanced wipe---->Dalvik/Data/Cache/System/Vendor ]
if not success please reboot into TWRP and try again.
1b reboot twrp
1c Flash Mokee ROM
Reboot system for setting up---->Note you can test any kernel supported in this step.
---------------Finished installation Treble Base ROM
2. Boot Recovery
2a wipe---->Advanced wipe---->Dalvik/Data/Cache/System/
2b change data partition to F2FS (if you want)----Option
2c install System.img GSI (ARM64_a only)
Reboot system
++ Gapps with Error 70
Solution-
1.Wipe---Advanced wipe----select (system menu) option-----Repair or change file system----Resize File System
2.Flash gapps again
++ Encrypted login
Setting---Fingerprint----setup (pattern /Password)
Note will effected with both Android and Twrp Login
-Remove Android Screen lock ----Twrp Login remove too
-Add Android Screen lock (Pattern/Password) ----Twrp Login add too
+++Magisk 19.3
-Recommended module
Viper4Android FX Legacy 4.3
Universal GMS Doze
SafetyPatch v3
...more
Picture my device " Unofficial Havoc 9x.GSI " quick charging
[9.0.0_r45/v115] download : https://androidfilehost.com/?a=show&w=files&flid=286761
Resurrection Remix v7.0 [GSI]
https://get.resurrectionremix.com/?dir=gsi
ARM64_A_20191205.img
Arrow OS (9x.GSI)
https://sourceforge.net/projects/arrow-os/files/arrow-9.x/GSI/
2019-04-18 extract file first ---- system_arm64_a.zip
Unofficial Omnirom (9x.GSI)
(05-06-2019 UPDATE)
https://forum.xda-developers.com/pr...abled-device-development/9-0-omnirom-t3901305
official Havoc 9x.GSI
https://forum.xda-developers.com/pr...bled-device-development/gsi-havoc-os-t3930030
##### Havoc-OS v2.7 Official Build #####
GSI Update 08-07-2019
Download ARM64-AONLY: https://bit.ly/2Xz2agy
Don't want F2FS data partition.
1.Flash Firmware
https://xiaomifirmwareupdater.com/#stable
2.Flash Vendor (mokee pie)
https://mega.nz/#!JG4WxI7I!O4vr5eEcVXJUjbZ_jZBUE9Q9nDZ9tavRrT9JXDpql1Q
3.Flash System
4.Flash Custom Boot Image (option)
5.Flash Magisk
6.Reboot
-forced encryption ( TWRP-20190117-3.2.3.0-4-clover.img support /data encrypt)
-No err from File App
-Setup your fingerprint
7.Flash Gapps
Pixel Dust PIE
https://forum.xda-developers.com/pr...evice-development/9-0-pixel-dust-pie-t3862484
system-arm64-aonly-20190326.img
Unofficial bootlegger 9x.GSI
https://forum.xda-developers.com/pr...d-device-development/9-0-bootleggers-t3919828
https://androidfilehost.com/?w=files&flid=292505
bootleggers-20190507-arm64-aonly-system.7z
unofficial LineageOS 16.0 GSI
https://sourceforge.net/projects/andyyan-gsi/files/
https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029
!!!! Mokee TWRP not support (Phh- :v114 ) decryption.
[AOSP 9.0] Phh-Treble
Update
AOSP 9.0 v115
https://github.com/phhusson/treble_experimentations/releases/tag/v115
!!!! Mokee TWRP not support (Phh- :v114 ) decryption. (Important)
==================================================
New Descendant 3.0 GSI
https://forum.xda-developers.com/pr...om-rom-ver-t3840578/post79678283#post79678283
update
Phh-device tree version v115
https://github.com/Descendant/InOps...DotOne/Descendant_ThreeDotOne_arm64_aonly.zip
-----------------
My review
1.Base rom : MK90.0-clover-201906070721-NIGHTLY
2.Kernel: EAS_clover_kernel_V6.1
-------------------
Can't set wallpaper
...more
AOSPExtended Official GSI 9 Pie
https://sourceforge.net/projects/aospextended-rom/files/treble_gsi/pie_arm64_aonly/
update
AospExtended-v6.6-arm64_aonly-20190705-0000-OFFICIAL.zip
unofficial PixelExperienceP GSI
https://github.com/EnesSastim/Downloads/releases/
LiquidRemix
https://forum.xda-developers.com/pr...d-device-development/9-0-liquidremix-t3889160
ARM64-A-ONLY-NO GAPPS [2019-4-17 ]
https://drive.google.com/open?id=11e2RAumtcTZUyX8JBJLKgIn8H214Nmci
WARNING: THIS IS EXPERIMENTAL BETA MEANT FOR DEVELOPERS AND TESTERS NOT AS DAILY DRIVER
Caution: Android 11 builds are incompatible with Android 12. Beware!
Credits:
@Woomymy
@J6idot
@mastersenpai05
@myst33d
https://github.com/notmyst33d
Developers WoomyMy, J6idot , mastersenpai05 and Myst33d have helped develop an unofficial TWRP for rosemary - xiaomi redmi note 10s
Installation Video:
Code:
https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file
http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file
https://github.com/RedmiNote10S/recovery_device_xiaomi_rosemary
Since this is not yet official, only proceed if you are competent enough and brave.
(If you need instructions on how to flash, please do not flash this with fastboot method)
Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.
TWRP 3.6+ Development Build status, fixes, bugs and downloads: [here]
TWRP -3.6.2_11-2
NameModifiedTWRP-3.6.2_11-208/03/2022
Changelog
Fix brightness when max brightness is 255
Render GUI at 60FPS
Reposition statusbar icons and remove top offset
A lot of code cleanup
Update TWRP sources
DONT INSTALL THIS ON MIUI 13
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
Reboot and enjoy!
With custom recovery
Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
Android 11 Roms: YES
Android 12 Roms: NO
TWRP-3.6.2_12-rc1
NameModifiedTWRP-3.6.2_12-rc108/04/2022
Changelog
Sync TWRP sources
Add support for Android 12 decryption
Fix booting on MIUI13
DONT INSTALL THIS ON MIUI 12.5
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
Reboot and enjoy!
With custom recovery
Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
MIUI 13 vendors: COMPATIBLE
MIUI 12 vendors:
A11 GSI / MIUI 12 system: FULLY INCOMPATIBLE
A12 GSI: COMPATIBLE, but you CAN NOT flash the boot.img, you need to flash the UPDATE ZIP using a custom recovery / Magisk
OrangeFox-R11.1_1-Unofficial
NameModifiedOrangeFox-R11.1_1-Unofficial07/01/2022
Changelog
Fix brightness when max brightness is 255
Render GUI at 60FPS
Reposition statusbar icons and remove top offset
A lot of code cleanup
Update OrangeFox sources
DONT INSTALL THIS ON MIUI 13
Update Magisk OrangeFox addon to v25.2
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
Reboot and enjoy!
To get Fox addons working, you need to reflash OrangeFox .zip file
With custom recovery
Download OrangeFox .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
Android 11 Roms: YES
Android 12 Roms: NO
Older versions:
NameModifiedBeta-07-11-30-202112/17/2021
🗞 Changelog
Sync TWRP sources (Version number updated to 3.6.0)
Symlink /dev/block/bootdevice -> /dev/block/platform/bootdevice (required by some scripts like OrangeFox installer)
Allow flashing VBMeta
Disable "Reflash TWRP after flashing ROM". (Causes AVB problem when installing MIUI, can still be done manually)
Build ZIP TWRP installer
Publish build logs for more transparency
Known bugs
Mounting Adopted storage
Vibrator
NameModifiedRC-01-01-09-20221/9/2022
🗞 Changelog
Fix Bootctrl
Fix vibrator
Known bugs
Mounting Adopted storage
TWRP Version 3.6.1_11-1
NameModifiedTWRP-3.6.1_11-13/13/2022
🗞 Changelog
Fix BootCTRL
Update TWRP sources
Fix vibrator
Enable DT2W in recovery
Install instructionsWithout TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
Reboot and enjoy!
With TWRP/OrangeFox
Download TWRP .ZIP installer and flash in recovery
TWRP Version 3.6.2_11-1
NameModifiedTWRP-3.6.2_11-16/14/2022
🗞 Changelog
Sync TWRP sources
Orangefox Recovery Version R11.1_1-Beta
NameModifiedOrangeFox-R11.1_1-Beta3/13/2022
🗞 Changelog
Fix BootCTRL
Update OrangeFox sources
Fix vibrator
Enable DT2W in recovery
Update Magisk OrangeFox addon to 24.2
Install instructionsWithout TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
Reboot and enjoy!
To get Fox addons working, you need to reflash OrangeFox .zip file
With TWRP/OrangeFox
Download OrangeFox .ZIP installer and flash in recovery
Nice, it's beta 2
to apply encrypt patch, you must decrypt first.
So
- you have to disable security password/fingerprint in your parameter first.
- then reboot in recovery
- format data
- reboot again to recovery and apply patch.
How to use redmi note 10s unofficial twrp recovery
test (beta 2) after disabling security (fingerprint and pin)
- flashing magisk.zip -> ok
- backup -> ok
- restore -> ok
- MTP internal SD -> ok
- MTP external SD -> nok, file manager stuck on it (win10 or linux mint)
Please full prosses explain and 1 question flash fastboot method
This the link of the Official Tutorial from the Unofficial TWRP Website:
unofficial twrp 3.6.1 Root Redmi Note 10s (rosemary) - unofficial twrp
Download unofficial twrp 3.6.1 root Redmi Note 10s, user who own Redmi Note 10s can root it by following the below instructions
unofficialtwrp.com
Great
miravision said:
Developer WoomyMy has released an unofficial TWRP for rosemary - xiaomi redmi note 10s
Installation Video:
Code:
https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file
http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file
Since this is not yet official, only proceed if you are competent enough and brave.
(If you need instructions on how to flash, please do not flash this with fastboot method)
Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.
Click to expand...
Click to collapse
I'm sorry but, do you atleast have the permission to share this?
Also, WommyMy should be the guy to upload it, not you.
Edit: thanks for fixing the thread
Also you're missing the device tree.
Hello. As one of the developpers of this TWRP DT, I am not really OK with that.
Firstly, you linked the wrong device tree Real link here
Also, I didn't published this on XDA because this TWRP is still in BETA. And it contains major bugs, like flashing dynamic partitions in fastbootd. Even if bugs will me fixed, I was planning to wait a release candidate before publishing the release here (this will require even more testing, if people want to help us testing, this will be even better).
So please, can you delete this or add clear warnings about the beta state?
Regards, Woomy
@miravision I think we should also add credits to people like @J6idot , @mastersenpai05 and Myst33d who did a great job helping building twrp.
Woomymy said:
@miravision I think we should also add credits to people like @J6idot , @mastersenpai05 and Myst33d who did a great job helping building twrp.
Click to expand...
Click to collapse
Yes, I believe they should get their work credit.
Will be fix soon.. don't too hurry.
mastersenpai05 said:
Will be fix soon.. don't too hurry.
Click to expand...
Click to collapse
Thanks bro
Keeps restarting when i try to flash a custom ROM from xiaomi eu, any Fix please ?
Wow., Hoping for releasing custom roms for our handsets.,keep up the good work devs
Katho536 said:
Keeps restarting when i try to flash a custom ROM from xiaomi eu, any Fix please ?
Click to expand...
Click to collapse
Xiaomi eu has no support for 10s iirc
No support for Mediatek devices on Xiaomi.eu, Global.rom and other
@miravision can u provide the vbmeta.img file?
Original post updated with attached vbmeta.img
langithitam said:
@miravision can u provide the vbmeta.img file?
Click to expand...
Click to collapse
Hi and thanks for sharing
Is it possible just to boot from TWRP recovery via Fastboot without flashing it on the phone?
I have also a Poco X3 NFC with stock MIUI 12.5 with Magisk root, but with stock recovery (so I can do all OTA updates) where I'm doing the same.
When I need it, I just do
fastboot boot TWRP-file.img
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-S with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning, we would like to thank:
LineageOS & CM (R.I.P.) team
Evolution X Team & @AnierinB
GZOSP team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 17.1
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
We recommend MindTheGapps as it has been thoroughly tested and it works well with the ROM, some other minimal (and others) GApps packages could have issues, so try using MindTheGapps if you have any issues with other GApps packages
MindTheGapps: Download from HERE
Due to new light sensor autobrightness is a mess for now. But will be fixed soon I hope.
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases, these apps include proprietary libs/code and cannot be included in the device trees on GitHub or we risk having the ROM banned from GitHub. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from GitHub, and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is how users can/should install updates most of the time, this can be done with the built-in updater service or with a custom recovery.
Q. How do I 'dirty flash' builds?
A 1. For "A only" devices: Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
A 2. For "A/B" devices": Wipe the ART/Dalvik cache. Flash the ROM, reboot to the recovery, flash GApps, your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android S. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)16.08.2022 Weeklies were the last builds based on OOS11 base.Starting with 23.08.2022 Builds, we are switching to OOS12 Base.BE ADVISED !!!!DO NOT FLASH NEW WEEKLY OVER 16.08.2022 Builds via OTA. Please follow the instructions in the 2nd post for FW update first, then you can flash New Weeklies.
If you are flashing using adb sideload, GAPPS needs to be flashed on every dirty flash as it's mentioned above.
If you are flashing using OTA, no need to flash GAPPS, .
Currently supported Root Solution:
Magisk versions >= feel free to report. Didn't tested myself.
Instructions for OTA ("Over-The-Air" Updates) on "A only" devices (not A/B):
Using on board recovery will be enough mostly for your operations.
Instructions for OTA ("Over-The-Air" Updates) on "A/B" devices:
Open the updater app, download the update, then press install and wait for the process to finish (feel free to let it run in the background), then press reboot when prompted, there isn't any need to flash GApps separately
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
GitHub - AICP/kernel_oneplus_sm8250
Contribute to AICP/kernel_oneplus_sm8250 development by creating an account on GitHub.
github.com
Device tree source:
GitHub - AICP/device_oneplus_kebab
Contribute to AICP/device_oneplus_kebab development by creating an account on GitHub.
github.com
Follow this guide if you want to extract the vendor blobs
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on GitHub
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
(mention all the devs who have contributed to your device tree, kernel, vendor, etc,
only mention the main ones though, probably the top four or so, otherwise this list will be a mile long xD)
Information:
ROM OS Version: 12.1
Kernel: Linux 4.19.11-perf
ROM {Firmware|Vendor} required: Latest OOS 12 (At least C20/21 firmware)
Status: STABLE
Release Date: 23-08-2022
You want to see a "normal" night at the "DEV office", click here!!
For further support you can visit our TG Channel:
AICP Support Channel for OnePlus 8 Devices
PLEASE BE ADVISED - YOU MUST UPDATE TO OOS12 FIRMWARE BEFORE INSTALLING THE 8/23 UPDATE.
If you are on OOS11 based Stock or Custom ROM:
Best approach is to flash stock OOS11 and update to the latest for your device OOS12 OTA.
While it's done, you can follow the flashing instructions over stock OOS12 given below.
Click to expand...
Click to collapse
The current firmware upgrade path is available here as found on the Op8 series Telegram support group:
Spoiler
1. Boot up AICP recovery
2. Go to "Advanced" -> "Enable ADB"
3. Check your DDR type using the following command:
adb shell getprop ro.boot.ddr_type
or in case getprop returns an empty value, use:
adb shell cat /proc/devinfo/ddr_type
4. Download firmware (C33 recommended, minimum C20/21 required) from here:
FirmWares - Google Drive
drive.google.com
5. Go to "Advanced" -> "Enter fastbootd"
6. Execute following commands after opening a command line in the fw directory:
fastboot flash --slot=all abl abl.img
fastboot flash --slot=all aop aop.img
fastboot flash --slot=all bluetooth bluetooth.img
fastboot flash --slot=all cmnlib64 cmnlib64.img
fastboot flash --slot=all cmnlib cmnlib.img
fastboot flash --slot=all devcfg devcfg.img
fastboot flash --slot=all dsp dsp.img
fastboot flash --slot=all featenabler featenabler.img
fastboot flash --slot=all hyp hyp.img
fastboot flash --slot=all imagefv imagefv.img
fastboot flash --slot=all keymaster keymaster.img
fastboot flash --slot=all logo logo.img
fastboot flash --slot=all mdm_oem_stanvbk mdm_oem_stanvbk.img
fastboot flash --slot=all modem modem.img
fastboot flash --slot=all multiimgoem multiimgoem.img
fastboot flash --slot=all qupfw qupfw.img
fastboot flash --slot=all spunvm spunvm.img
fastboot flash --slot=all storsec storsec.img
fastboot flash --slot=all tz tz.img
fastboot flash --slot=all uefisecapp uefisecapp.img
7. Flash correct XBL files
* For DDR type 0 (DDR4):
fastboot flash --slot=all xbl_config xbl_config.img
fastboot flash --slot=all xbl xbl.img
* For DDR type 1 (DDR5):
fastboot flash --slot=all xbl_config xbl_config_lp5.img
fastboot flash --slot=all xbl xbl_lp5.img
8. Boot your recovery from here and then install the new update:
Android12L - Google Drive
drive.google.com
9. Now, you can update via OTA safely.
IF YOU ARE ON STOCK OOS12
These instructions are for you:
Spoiler
Thanks to @Anierin_Bliss
First Time Install / Clean Flash
1. Have an unlocked bootloader & OOS 12 (C20 - C33) flashed to both slots.
2. Download vbmeta, recovery, ROM and GAPPS (optional) for your device from here: https://drive.google.com/drive/folders/1A2SeD6YFKJ2S-iiAKmyfgnrEeJz8zjNm
3. Reboot to bootloader
4.
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot reboot recovery
5. While in recovery, navigate to Apply update -> Apply from ADB
6. adb sideload ROM.zip -> reboot recovery -> adb sideload GAPPS.zip
7. Format data, reboot to system & Enjoy !
bessss
Installed in the early afternoon,
Everything works perfectly for the moment
Pleased to see aicp on A12.
Good work guys !
great work
Flashed and works super smooth
NICE, love these ROMS.'
my 1+8t updated to 12 about 2wks ago, i know i let that slip thru...will have to backflash to 11 prior to flashing this ROM?
OR could i perform a factory reset and follow prompts to install?
Thanks much,
Richard K
racenrich said:
NICE, love these ROMS.'
my 1+8t updated to 12 about 2wks ago, i know i let that slip thru...will have to backflash to 11 prior to flashing this ROM?
OR could i perform a factory reset and follow prompts to install?
Thanks much,
Richard K
Click to expand...
Click to collapse
You gotta be on the oos11 firmware as a base before you can flash any custom a12 roms on the 8t at the moment.
Thanks for the confirmation, looks like im going backwards before forwards!
racenrich said:
Thanks for the confirmation, looks like im going backwards before forwards!
Click to expand...
Click to collapse
Haha yeah. A bit of a pain.
Hi,
AICP on Oneplus 7T pro for a while and now on Oneplus 8T.
What happiness with this ROM on these 2 phones. No bug discovered yet.
There is only the July patches to receive and everything will be perfect (I am aware that the ROM on 8T is recent and that the developers are doing their best -a big thank you to you-).
Hi! Installed AICP 17.1 (latest)today with MindTheGapps 12.1.0 arm64 and any Google service is not working ie. Contacts, Downloading from store (Stucks at pending...). I came from latest OOS as instructed. I noticed that in Play Store's and Play Serveices' Mobile data & Wifi settings there were Setting "Allow network access" toggled off, but didn't help to turn them on
Tried fresh install without Gapps and other Points of Interest (thse are working in fresh install without gapps):
- Developer options not working
- Opening settings/AICP Extras -> "Not rooted ..." Message
- Android notification bar not expanding
- Mobile data not working
Have I missed something?
vezkari said:
Hi! Installed AICP 17.1 (latest)today with MindTheGapps 12.1.0 arm64 and any Google service is not working ie. Contacts, Downloading from store (Stucks at pending...). I came from latest OOS as instructed. I noticed that in Play Store's and Play Serveices' Mobile data & Wifi settings there were Setting "Allow network access" toggled off, but didn't help to turn them on
Tried fresh install without Gapps and other Points of Interest (thse are working in fresh install without gapps):
- Developer options not working
- Opening settings/AICP Extras -> "Not rooted ..." Message
- Android notification bar not expanding
- Mobile data not working
Have I missed something?
Click to expand...
Click to collapse
I have the same problem. And there is no first setup like adding google account and so on. Phone just boot to system and all is messed up...
Zeezala said:
I have the same problem. And there is no first setup like adding google account and so on. Phone just boot to system and all is messed up...
Click to expand...
Click to collapse
I managed to recover from this with these steps:
1) Flash ROM again without Gapps to get access to Developer options and ADB
2) Download MSM Tool for your device from HERE. I used latest European version.
3) Follow precisely THESE instructions to get stock ROM
+) I installed PixelExperience 12 Recovery and ROM and now working device
vezkari said:
I managed to recover from this with these steps:
1) Flash ROM again without Gapps to get access to Developer options and ADB
2) Download MSM Tool for your device from HERE. I used latest European version.
3) Follow precisely THESE instructions to get stock ROM
+) I installed PixelExperience 12 Recovery and ROM and now working device
Click to expand...
Click to collapse
Ahhhh, ok, thanks. Good job.
I use MSM tool everytime I install new rom. So I think there isn't problem in my case. But another recovery is good point. I will try this in the future. Thanks.
Hi, does this ROM has SafetyNet built-in?
Thanks
Great rom thanks for your great work!
Just a small knit pick...
The font for 5G seems really small compared to LTE. Just wondering if that can be tweaked to match the LTE font size.
The night light feature seems a bit too strong even when set at minimum. Can that be tweaked?
i use signal for sms, etc.
when receiving a txt, i dont get the notification banner pop-ups. upon review of settings, everything is proper, but still no pop-ups.
the issue seems to be described per this link:
Android 12 Beta 4: Most notification banner pop-ups are not appearing due to bug
Google is "moving into the final phase" of Android 12. However, a bug in Android 12 Beta 4 sees most notification banners not pop up...
9to5google.com
Newbie question. I have not flashed a rom in a very long time! I just paid off my T-Mobile OnePlus 8t and want to flash this custom rom. I am just on the stock android 11 software from T-Mobile. I understand how to unlock my bootloader and I should be able to follow the provided instructions in the first post. My question is is there anything else I should know before hand. I only ask cause I jumped the gun on my 7T McLaren and the finger print scanner never worked again! Is that the same with the 8t. Or can I simply follow the above instructions and enjoy the rom? Thanks