is it possible to overclock/tune the audio settings and increase the sound that comes out from the speakers???
I hate the tilt speaker, its so quiet that i always miss my calls. Plus my headphones are louder not on my ear than playing music from the speaker.
mehh???
Can't do the phone for you, but get a player with pre-amp capability in the equaliser - like GSPlayer, or TCMP
G.
just tried gsplayer, its not loud either...
is there anyway to make the speaker louder for mp3's??? :/ atleast for the ring tone.
Download your ringtones from your pda to your pc and open them with an audio edit program (like audition or ...). Raise the volume and save it.
Put them on your pda
think you should go to a doctor
i had to decrease the speaker to 50% cause it was much to loud.
there will be no software-way to increase, cause it is limited to avoid hardware-problems with the speaker. try to open your kaiser and do some electonic-work
bye andré
Are you complaining about the ring tone volume? or the music volume?
If so then do the following using your computer:
1. Save the Ring Tones or the Music Files onto your Computer.
2. click on Start/All Programs/Accessories/Entertainment/Sound Recorder/
3. On the Sound recorder, click File/Open/ ( open the Ring Tones you saved earlier or the music files)
4. Increase the volume and then save the file. You can re-record the saved file with another 25% volume increase.
unk3 said:
is it possible to overclock/tune the audio settings and increase the sound that comes out from the speakers???
I hate the tilt speaker, its so quiet that i always miss my calls. Plus my headphones are louder not on my ear than playing music from the speaker.
Click to expand...
Click to collapse
Not offense meant, I'm talking from a professional point of view: go to a ENT specialist to check on your hearing capabilities. Especially if you're young, you may have damage from various club visits, etc.
If you're older, you may have had ISSHL without even noticing it.
Seriously: I'm 42 and the HTC TyTN II is VERY loud at the max volume setting(s), so you definetely have to check out your hearing capabilities. Even if you think you hear very well, it is possible that you hear only certain frequencies very well and others not.
Just a friendly advice, you don't have to agree.
the phone has its speaker on the rear side, which is sucks!
but then they couldnt place the speaker grills on the front either for sake of looks
i (and i am sure almost everybody) keep the phone with the lcd facing up so the speaker gets blocked and the sounds are muffled.
my nokia has its speaker on the top (not front) which sounds awesome even when in pant pockets..
seriously i think uk3 is fine..lol..nothing wrong with his ears
Take a look at your sound profile.
I was having the same problem until i checked that and noticed that it defaults at sound 40% ring 40%
knocked it up to 100% and all is well now
the sound for the default ringtone... (Ring Windows Mobile) is VERY loud when volume is at max. BUT the ringtone of the mp3 that i put into the /my documents/my ringtones are very low and unable to hear them when i have the phone in my pocket. I notice about a 50% in volume change.
This goes with the windows media/audio manager. It plays really low. My hearing is fine im only 18 lol
cotc2001 said:
Take a look at your sound profile.
I was having the same problem until i checked that and noticed that it defaults at sound 40% ring 40%
knocked it up to 100% and all is well now
Click to expand...
Click to collapse
where and how did you adjust the sound profile? please elaborate..
Same here
Can you let me know if you find a solution to this. The problem is real. Maybe we have DOA units. My speaker is bearely audible.
unk3 said:
is it possible to overclock/tune the audio settings and increase the sound that comes out from the speakers???
I hate the tilt speaker, its so quiet that i always miss my calls. Plus my headphones are louder not on my ear than playing music from the speaker.
Click to expand...
Click to collapse
if you have a program like Audacity you can use that to make your MP3ringtones louder.
asfoor said:
where and how did you adjust the sound profile? please elaborate..
Click to expand...
Click to collapse
Not sure where or if it even exist on a default settings (i've got the 02 version of the Kaiser i.e the strealth) but i've got SPB phone suite installed so there is a icon on my today screen which I can just tap and set various profiles to ring and notification settings (set to 100% ring and 100% vibrate, 40% ring and vibrate, just vibrate etc.)
But as a test I did a hard reset (backed up everything with sprite backup first) and then played the default ringtone and it was very quiet , restored from my backup which had spb phone suite installed and the volume increased a lot
Hello folks ... actually my problem with Kaiser is different, as my speakers work so fine with both ring tones and music ... but my problem is with the ring back tone (RBT) which is the ringing tone you hear till the other party picks up the call ... I can barely know whether it's dialing or not ... anyone can give me the registry key/value to enhance this.
TIA
HI dude, try the SRS WOW HD app.
It works on my Kaiser
Here http://forum.xda-developers.com/showthread.php?t=355496&highlight=srs_wowhd_arm
The volume of the actual mp3 doesnt matter. I rerendered a mp3 to 20db more than it was.. and it still played the same volume on the phone... Is it just that the speaker of the kaiser is crappy?
Can anyone suggest agood custom setting
If u could clcik a Picture captuer & post it
Would help alot
Thank You
cotc2001 said:
Take a look at your sound profile.
I was having the same problem until i checked that and noticed that it defaults at sound 40% ring 40%
knocked it up to 100% and all is well now
Click to expand...
Click to collapse
How do u do that ?
where in the phone is it ?
Please Help
How do I make the ringtone more lound? Right now i pretty much have to be within 5 feet of the phone to hear it.
I put on some custom MP3s to use as ringtones on the phone. but even the default ringtones that came with the phone are quiet.
PS - sort of on topic... when you pull down the sound manager thing from the startbar it has 2 sliders. one has tilt icon other has headset phone icon... what does each one do? is the tilt one speaker volume and the headset one earpiece volume?
I tried turning up both sliders to the max but ring tones are still not very loud. =/
Ok. here's the fact. Tilt speakers are not loud at all. So no matter whatever way you try to put on the sound, they won't get louder than it is. Yes. You got it right. Speaker icon is for speaker and headset icon is for earpiece volume. You might want to read your user manual. But to the topic, the best you can do is, before you transfer the mp3 ringtones, crank it up the mp3 volume by using programs like audacity. Then save it and transfer to tilt and see if that makes any difference. I will say a bit lounder than it should be but not that much difference though.
Isnt it a very very low ringtone level on the diamond?..
I barely hear the phone when it calles in my pocket and its not even worth to try playing music without the headphones since its so low?..
Is there any apps or anything that can fix this?
Cheers!
i have same problem
any music i put on diamond plays soooooo low, no chance to set it as a ringtone
Has anyone found a decent solution for the low volume issue when using a headset on mt3g? I've tried all the meltus audio files but the sound ends up way too distorted. Its loud but it sounds like ****. The DSPManager on CM6r3 helps slightly but not enough. All I want is louder max volume when using a headset.
staunty said:
Has anyone found a decent solution for the low volume issue when using a headset on mt3g? I've tried all the meltus audio files but the sound ends up way too distorted. Its loud but it sounds like ****. The DSPManager on CM6r3 helps slightly but not enough. All I want is louder max volume when using a headset.
Click to expand...
Click to collapse
I am using Chromers 4.4 rom with Meltus audio files v2r2 and "headset boost +in call volume 1". I turned off the DSP thing. It made it all distorted.
I hope this helps, I know you said you tried the files.
I don't know if it's ROM related or not but I don't remember having this problem previously. I'll give the settings you mentioned a try though.
Sent from my Jitterbug
Any setting for the DSPManager for G1
I just went to Android Device Manager, to make sure my Nexus 6 was properly listed as one of my devices. When I hit the "RING" button, the default ringtone plays at full volume, but the speaker on the bottom of the screen is crackling. I dont think I hear the crackling with music playing. Anyone else notice a crackle when the ringtone plays at high volume? Or maybe I need to line up for an RMA? lol