Hi everyone,
I'm using Redmi 4X (China Version) currently with the latest 8.11.15 Global Beta ROM. I would like to flash TWRP again and go back to Xiaomi.EU ROM. I'm a bit confused because: If I want to flash LineageOS for Redmi 4X (santoni), in the instructions it says "wipe system" but in Xiaomi.EU they say "don't wipe system". So if I want LOS for now, and then Xiaomi.EU, who is wrong and who is right? Or will I have any issues if I wipe system?
Yours sincerely,
CyNote / peryson
Wiping system is must before flashing any custom rom.
Atifsid35 said:
Wiping system is must before flashing any custom rom or kernel.
Click to expand...
Click to collapse
In Xiaomi.EU site they are saying when you flash their rom, do not wipe system or persist! (I'm confused)
Because I wanted to try LineageOS, and in LOS site they say to wipe system.
You must need to clean flash (including wiping system) when switching between different ROM but you don't need to wipe system if you are flashing same ROM or it's update.
E.g. as now you are using MIUI 8.11.15, so whenever next update releases you can flash update without wiping system.
So if you want to flash Lineage OS and your device has currently installed ROM is MIUI then you'll have to clean flash including wiping system.
This same applies to all other ROMs. If currunt ROM and the ROM you want to flash are different then you'll have to wipe system too.
If you've already installed xiaami.eu ROM installed already then you don't need to wipe system, you can directly flash update/on top of it.
Xiaomi.eu and MIUI are two different ROMs.
MIUI is official ROM from Xiaomi and Xiaomi.eu is modified ROM from official MIUI ROM hence they are different and requires clean flash if you switch in between.
You'll have clean flash including wiping system in order to flash Lineage OS on your device.
Do take full backup of your data before flashing.
Hope it clears your doubt.
Please help me. I can't seem to understand what exactly I need to do in order to install a custom ROM on my K20 Pro (Global 10.3.5.0.) I have tried following this (https://forum.xda-developers.com/k20...0-pro-t3953844) post thoroughly and others as well, but can't seem to exactly understand what I am required to do. Most custom ROM's state [Raphael], but as I purchased this device in India, it would most probably be [Raphaelin], after unlocking the Bootloader and installing TWRP, am I supposed to flash a Custom ROM (for ex. Lineage OS) directly or would I have to install a ROM which would make my device [Raphael]? Vendor and Firmware have gone over my head, I do not understand what I need to di. If someone could help me out, It would be mean a lot. Thank you.
Platinum_Pyth0n said:
Please help me. I can't seem to understand what exactly I need to do in order to install a custom ROM on my K20 Pro (Global 10.3.5.0.) I have tried following this (https://forum.xda-developers.com/k20...0-pro-t3953844) post thoroughly and others as well, but can't seem to exactly understand what I am required to do. Most custom ROM's state [Raphael], but as I purchased this device in India, it would most probably be [Raphaelin], after unlocking the Bootloader and installing TWRP, am I supposed to flash a Custom ROM (for ex. Lineage OS) directly or would I have to install a ROM which would make my device [Raphael]? Vendor and Firmware have gone over my head, I do not understand what I need to di. If someone could help me out, It would be mean a lot. Thank you.
Click to expand...
Click to collapse
If you're running stock MIUI and haven't moved to any custom MIUI's till date then you can straight away flash LOS. Moreover, most of the custom roms work on multiple vendors irrespective of whether it is a China Vendor or India or Global. It doesn't matter till the time the developer specifically asks you to be on a particular vendor.
Vendor isn't a dreaded thing. It's just the drivers needed to run the various components in the device (BT, WiFi etc). Till the time you don't wipe the vendor partion in twrp, you would always be good to go. You could carry on flashing custom roms w/o careing about the vendor.
Sent from my Redmi K20 Pro using Tapatalk
Sukhi said:
If you're running stock MIUI and haven't moved to any custom MIUI's till date then you can straight away flash LOS. Moreover, most of the custom roms work on multiple vendors irrespective of whether it is a China Vendor or India or Global. It doesn't matter till the time the developer specifically asks you to be on a particular vendor.
Vendor isn't a dreaded thing. It's just the drivers needed to run the various components in the device (BT, WiFi etc). Till the time you don't wipe the vendor partion in twrp, you would always be good to go. You could carry on flashing custom roms w/o careing about the vendor.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Thank you very much for your reply. So, just to check if I have understood correctly. I can just install TWRP and then flash Lineage OS straight away, right? I checked (https://forum.xda-developers.com/k20-pro/development/rom-lineageos-16-0-t3965311), and it mentioned:
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash proper vendor and firmware
Flash the latest build and GApps
Reboot
What is "proper vendor and firmware"? And would I also be required to flash this?
Thank you.
Platinum_Pyth0n said:
Thank you very much for your reply. So, just to check if I have understood correctly. I can just install TWRP and then flash Lineage OS straight away, right? I checked (https://forum.xda-developers.com/k20-pro/development/rom-lineageos-16-0-t3965311), and it mentioned:
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash proper vendor and firmware
Flash the latest build and GApps
Reboot
What is "proper vendor and firmware"? And would I also be required to flash this?
Thank you.
Click to expand...
Click to collapse
Go back to the Lineage instructions and read immediately below that. It starts P.S.
It explains exactly proper vendor and firmware means.
No you won't need to install anything for this step
Platinum_Pyth0n said:
Thank you very much for your reply. So, just to check if I have understood correctly. I can just install TWRP and then flash Lineage OS straight away, right? I checked (https://forum.xda-developers.com/k20-pro/development/rom-lineageos-16-0-t3965311), and it mentioned:
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash proper vendor and firmware
Flash the latest build and GApps
Reboot
What is "proper vendor and firmware"? And would I also be required to flash this?
Thank you.
Click to expand...
Click to collapse
Nope ! You don't need to flash vendor + firmware as you already running an untouched stock MIUI build. That is for people who are coming from either modified MIUI builds (EU, Miroom etc) or custom roms with a different vendor (India device running on China Vendor)
Custom roms don't carry the Vendor Firmware files and you can only modify the existing Vendor when you move to other region stock or custom MIUI roms.
Back up your data on Internal storage to a safe place either on a PC or OTG. Skip this step if you have nothing important.
Boot In TWRP
Wipe System, Data , Cache , Dalvik
(Don't reboot at this point, Not Even a Recovery reboot)
Flash LOS
Flash GApps
Go to Advanced Wipe and Format Data by typing Yes
Reboot
Sent from my Redmi K20 Pro using Tapatalk
Sukhi said:
Nope ! You don't need to flash vendor + firmware as you already running an untouched stock MIUI build. That is for people who are coming from either modified MIUI builds (EU, Miroom etc) or custom roms with a different vendor (India device running on China Vendor)
Custom roms don't carry the Vendor Firmware files and you can only modify the existing Vendor when you move to other region stock or custom MIUI roms.
Back up your data on Internal storage to a safe place either on a PC or OTG. Skip this step if you have nothing important.
Boot In TWRP
Wipe System, Data , Cache , Dalvik
(Don't reboot at this point, Not Even a Recovery reboot)
Flash LOS
Flash GApps
Go to Advanced Wipe and Format Data by typing Yes
Reboot
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
I'm trying to install a custom rom in K20 pro raphaelin. But it is getting stucked at recovery. Then I have to install stock ROM using MIFlash. Any help on this issue?
Custom ROM is successfully flashed in TWRP.
MyNameIsAbey said:
I'm trying to install a custom rom in K20 pro raphaelin. But it is getting stucked at recovery. Then I have to install stock ROM using MIFlash. Any help on this issue?
Custom ROM is successfully flashed in TWRP.
Click to expand...
Click to collapse
Did you do FORMAT Data (not just Wipe) when you installed your custom ROM, and before rebooting?
Does anyone have the complete steps to flash the Android 11 GSI?
This article just gives me bootloops on my mi 8 when flashing the android 11 GSI.
vic97 said:
Does anyone have the complete steps to flash the Android 11 GSI?
This article just gives me bootloops on my mi 8 when flashing the android 11 GSI.
Click to expand...
Click to collapse
Do not flash GSI Rom But if you must, it's your decision.
Generally with GSI roms you only flash the system part. Everything else such as boot, vendor and drivers will be from a rom made for the mi8, such as an AOSP rom or a custom miui rom such as Xiaomi.EU. below are basic instruction after you already have a rom installed, have removed all passwords, and have chosen factory reset in recovery.
Follow these steps at your own risk, and be sure to make a backup first and copy it to your desktop
These are basic generalized Instructions after Formatting storage then installing a rom specifically made for the mi8. I strongly suggest that you do not Flash the new beta build, and that you instead wait for someone to build it specifically for the mi8.
The Mi8 can only use type A GSI's roms
1. Reboot Recovery
2. Perform factory reset, passwords must be removed or you will have a bootloop
3. Install GSI to system
4. Reboot to recovery, then reboot to OS > Setup > Enjoy testing it or enjoy your brick?
Once again, I would strongly suggest that you wait and not flash the new Android 11 rom. Also there is a very good chance that it will not boot to system, its early and beta builds are always super buggy at first. usually new builds are ready for non-Google devices by August.
vic97 said:
Does anyone have the complete steps to flash the Android 11 GSI?
This article just gives me bootloops on my mi 8 when flashing the android 11 GSI.
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-8/development/andorid-r-gsi-r1-developer-preview-t4054777
Am currently on MIUI 11.0.3 flashed with miflash
when i flash a custom rom, my phone gets rebooted to recovery
before flash wipe cache and dakvik and data and system...(the problem persists without and with wipes)
i have tried Pixel experience - Havoc -Evolution X....
also tried flashing global vendor before flash rom, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking
Any solutions for this problem?
thanks
Masoud.Ser said:
Am currently on MIUI 11.0.3 flashed with miflash
when i flash a custom rom, my phone gets rebooted to recovery
before flash wipe cache and dakvik and data and system...(the problem persists without and with wipes)
i have tried Pixel experience - Havoc -Evolution X....
also tried flashing global vendor before flash rom, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking
Any solutions for this problem?
thanks
Click to expand...
Click to collapse
Format the data partition in TWRP. You need to do this when installing over MIUI.
Robbo.5000 said:
Format the data partition in TWRP. You need to do this when installing over MIUI.
Click to expand...
Click to collapse
thanks
but after Format the data partition and Wipe cache and dakvik and mount and unmount the data partition and reboot and flash rom
and reboot to system my phone gets rebooted to recovery again
Masoud.Ser said:
thanks
but after Format the data partition and Wipe cache and dakvik and mount and unmount the data partition and reboot and flash rom
and reboot to system my phone gets rebooted to recovery again
Click to expand...
Click to collapse
Are you booting into MIUI at least once after flashing it, before flashing anything else?
I've stopped doing the mount/unmount. I now always reboot back into TWRP after formatting data, seems more reliable.
In TWRP do a factory reset, then format data, then reboot back into TWRP.
After this install the ROM you want
Robbo.5000 said:
Are you booting into MIUI at least once after flashing it, before flashing anything else?
I've stopped doing the mount/unmount. I now always reboot back into TWRP after formatting data, seems more reliable.
In TWRP do a factory reset, then format data, then reboot back into TWRP.
After this install the ROM you want
Click to expand...
Click to collapse
yes booting into MIUI at least once after flashing it
after wipe and flash rom and reboot
phone into twrp again and also internal storage format auto and am cant use storage and must again flash miui rom with miflash for problem storage
Masoud.Ser said:
yes booting into MIUI at least once after flashing it
after wipe and flash rom and reboot
phone into twrp again and also internal storage format auto and am cant use storage and must again flash miui rom with miflash for problem storage
Click to expand...
Click to collapse
Can you provide all the steps you are doing. I can't see any reason why it's not working.
Robbo.5000 said:
Can you provide all the steps you are doing. I can't see any reason why it's not working.
Click to expand...
Click to collapse
1.flash miui 11.0.3 with miflash and boot...no set setup...
2. flash twrp 3 with fastboot and reboot to twrp
3.wipe cache and dakvik
4. wipe data
5.reboot to twrp
6.flash custom rom without error
but after reboot phone again into twrp and no load rom also cant use storage and write and copy file on storage ...
i have tried Pixel experience - Havoc -Evolution X....
Masoud.Ser said:
1.flash miui 11.0.3 with miflash and boot...no set setup...
2. flash twrp 3 with fastboot and reboot to twrp
3.wipe cache and dakvik
4. wipe data
5.reboot to twrp
6.flash custom rom without error
but after reboot phone again into twrp and no load rom also cant use storage and write and copy file on storage ...
i have tried Pixel experience - Havoc -Evolution X....
Click to expand...
Click to collapse
Step 4 needs to be format data, not wipe data, you have to type 'yes' to confirm when you do it.
Robbo.5000 said:
Step 4 needs to be format data, not wipe data, you have to type 'yes' to confirm when you do it.
Click to expand...
Click to collapse
thanks
work good.
I'm new entered the Xiaomi phone discussion
a few short questions
....................
1-Is it necessary to format data for flash in each time?
2-even need to flash miui with miflah and boot before flash custom rom in each time?
and do need to flash vendor global my phone before flash custom roms?
Masoud.Ser said:
thanks
work good.
I'm new entered the Xiaomi phone discussion
a few short questions
....................
1-Is it necessary to format data for flash in each time?
2-even need to flash miui with miflah and boot before flash custom rom in each time?
and do need to flash vendor global my phone before flash custom roms?
Click to expand...
Click to collapse
1 No
2 No
If you want to flash something else, remove lockscreen security first before flashing. This should allow you to dirty flash an update, or clean flash a new ROM, without problems. You only need to format data when flashing over MIUI.
If you get into problems and you cannot successfully get a custom ROM working, this is when you need to flash MIUI first.
You only need to flash vendor/firmware files when the custom ROM recommends/requires a version that is different to what you currently have.
Masoud.Ser said:
Am currently on MIUI 11.0.3 flashed with miflash
when i flash a custom rom, my phone gets rebooted to recovery
before flash wipe cache and dakvik and data and system...(the problem persists without and with wipes)
i have tried Pixel experience - Havoc -Evolution X....
also tried flashing global vendor before flash rom, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking
Any solutions for this problem?
thanks[/QUOTE
Which model is yours indian version or Chinese ?
Click to expand...
Click to collapse
vicky#kick said:
Masoud.Ser said:
Am currently on MIUI 11.0.3 flashed with miflash
when i flash a custom rom, my phone gets rebooted to recovery
before flash wipe cache and dakvik and data and system...(the problem persists without and with wipes)
i have tried Pixel experience - Havoc -Evolution X....
also tried flashing global vendor before flash rom, but it also doesn't work.
Recovery is TWRP latest version, have also used orange fox recovery
Bootloader unlocking
Any solutions for this problem?
thanks[/QUOTE
Which model is yours indian version or Chinese ?
Click to expand...
Click to collapse
global
Click to expand...
Click to collapse
I am on k20 pro and trying to flash mortal os rc 14 but after flashing it properly it always stucks in bootloop...
1. Clean all the data partitions except internal storage
2. Flashing latest vendor for MIUI
3. Flashing mortal os rc 14 zip file
4. Flashing DFE
5. Rebooting and get stucks in bootloop
Help me what can i do..
aniketkumarak said:
I am on k20 pro and trying to flash mortal os rc 14 but after flashing it properly it always stucks in bootloop...
1. Clean all the data partitions except internal storage
2. Flashing latest vendor for MIUI
3. Flashing mortal os rc 14 zip file
4. Flashing DFE
5. Rebooting and get stucks in bootloop
Help me what can i do..
Click to expand...
Click to collapse
The emoji's screwed up my reply. Try again.
1. Next time create a new post, don't resurrect a vaguely similar old post.
2. Restore MIUI with a fastboot ROM and try again. Use my guide here to help you install the ROM of choice.
https://forum.xda-developers.com/k20-pro/how-to/simple-guide-flipkart-owners-t4151007/post83329343
If you're not sure what you're doing, follow the guide exactly, do not freestyle.
1.Install any rom
2. In recovery factory reset or change data partition to ext2 and then again back to ext4
Reboot
It will boot.
[email protected] said:
2. ...change data partition to ext2 and then again back to ext4...
Click to expand...
Click to collapse
WT........
Seriously?
Hi, I am new to K20 Pro, I have not unlocked my phone yet, I was just going through the forum, to understand all the things and how flashing is done in K20 Pro, I have a question about flashing the vendor, some ROM require it & some don’t, can anyone explain? And how do I choose the correct vendor for my device?? Where can I download the right vendor??
Thanks!
stanlin salu said:
Hi, I am new to K20 Pro, I have not unlocked my phone yet, I was just going through the forum, to understand all the things and how flashing is done in K20 Pro, I have a question about flashing the vendor, some ROM require it & some don’t, can anyone explain? And how do I choose the correct vendor for my device?? Where can I download the right vendor??
Thanks!
Click to expand...
Click to collapse
When flashing you will actually need vendor and firmware files together.
These are taken from the official MIUI fastboot ROMs. You can find them repackaged in a single flashable zip file from here.
https://downloads.akhilnarang.dev/MIUI/raphael/
Flashing one of these files in TWRP is the easiest way to go.
You can also find then repackaged as separate zip files from here
https://xiaomifirmwareupdater.com/
This site has a much greater archive, so is good if you need an older version that you can't find in the other site. You will need to make sure you download vendor and firmware files for the same version.
You should always stick to the version that is for the region of your phone. e.g. Indian vendor and firmware for an Indian K20 Pro, etc.
Some ROMs use an OSS vendor and so this is included as part of the ROM install. In which case there is no need to flash the MIUI vendor.
When a new version of MIUI is released, vendor and firmware files might get updated, to fix a bug or to add extra functionality. In this case some custom ROM devs will include them so that they get the bug fixes or extra functionality in their ROM too. When this happens they will update the minimum vendor and firmware version requirements for their custom ROM - the version will be the actual MIUI version in which the vendor and firmware files were updated.
Where a ROM doesn't specify vendor and firmware and doesn't have an OSS vendor, then it normally implies that any version will work that is from MIUI based on the same Android version. In this case use the most recent version, which you will already have if you've kept up to date with MIUI updates.
When installing a new ROM, you will only need to flash vendor and firmware files if your current version is less than the required version of the new ROM.
Robbo.5000 said:
When flashing you will actually need vendor and firmware files together.
These are taken from the official MIUI fastboot ROMs. You can find them repackaged in a single flashable zip file from here.
https://downloads.akhilnarang.dev/MIUI/raphael/
Flashing one of these files in TWRP is the easiest way to go.
You can also find then repackaged as separate zip files from here
https://xiaomifirmwareupdater.com/
This site has a much greater archive, so is good if you need an older version that you can't find in the other site. You will need to make sure you download vendor and firmware files for the same version.
You should always stick to the version that is for the region of your phone. e.g. Indian vendor and firmware for an Indian K20 Pro, etc.
Some ROMs use an OSS vendor and so this is included as part of the ROM install. In which case there is no need to flash the MIUI vendor.
When a new version of MIUI is released, vendor and firmware files might get updated, to fix a bug or to add extra functionality. In this case some custom ROM devs will include them so that they get the bug fixes or extra functionality in their ROM too. When this happens they will update the minimum vendor and firmware version requirements for their custom ROM - the version will be the actual MIUI version in which the vendor and firmware files were updated.
Where a ROM doesn't specify vendor and firmware and doesn't have an OSS vendor, then it normally implies that any version will work that is from MIUI based on the same Android version. In this case use the most recent version, which you will already have if you've kept up to date with MIUI updates.
When installing a new ROM, you will only need to flash vendor and firmware files if your current version is less than the required version of the new ROM.
Click to expand...
Click to collapse
Thanks a lot brother, for this detailed explanation.. [emoji56][emoji1]
hello everyone, my redmi 8 refuses to flash all firmware except those that miui has already tried and lineage os and komodo os the phone just always boots into twrp at the same time when you flash miui rom even custom it accepts it and the system works successfully
did you format data? note, format =/= wipe, its different but definitely required on every new rom install