Hi!!!
My device is Nora. I wanted to install a custom recovery but I failed because the system partition was encrypted, so cause of luck of time I decided to go back to stock ROM, so I did that and when booted up I realized the SIM wasn't detected, no IMEI (Obviously).
Maybe this helps:
No EFS or any backup
One I runed
HTML:
fastboot erase carrier
It's XT1944-3
I'm in Argentina (Stock ROM I flashed was RETAR)
Related
Okay, I have an Atrix HD that I have rooted and unlocked the bootloader and I have been running the SlimKat ROM with little to no problems and Philz Touch recovery for about a week until yesterday when my phone reset itself and started to boot loop. They only other thing I had flashed was a new logo to get rid of that stupid unlocked bootloader warning. I am fairly savvy when it comes to rooting and flashing roms because I have done this for years with various Samsung devices but the Motorola is a little new to me with having Fastboot.
Let me tell you what I have tried...
I first did a factory data reset in Philz and that did nothing.... then I tried to recover it back to my stock rom that I was running before using a nandroid backup that I had made with Philz Touch and same thing happened, it just sticks in boot loop. I then try to flash the PAC rom after I do a factory data reset and all the wipes I need to flash a new rom in Philz Touch to see if I can get a different rom to load and nothing happens but boot loop again.
Next I go to the forums to find answers and I start to set up my ADB on my computer... After I get ADB setup I first do fastboot -w to do a factory data reset through fastboot, download the stock Mexican rom and tried to flash all the components individually with ADB in fastboot the way skeevydude mentioned in one of his threads (sorry I can't remember which one) and I got a failed error "FAILED (remote failure)" when I tried to flash the system.img.
I then went to Mythtools v1.3 because I thought that I was doing something wrong with the ADB and fastboot... I put the stock Mexico retail rom into the firmware folder in Mythtools and tried to flash the stock firmware through Mythtools. Mythtoold froze when it rebooted the fastboot at 50 of 100%
Now I am at a loss, I have done everything that I know to try to fix this and I have searched everywhere for help and I need help. This is they only phone that I have because I just switched over to to a new carrier and just purchased this phone.
Any help would be appreciated!
UPDATE
I went into Philz Touch and formatted the /system so I could try and flash it again and now the phone boots straight to fastboot and Philz touch if I hold volume+ and power. I am going to download the stock mex retail rom and try and flash it through Philz touch.
UPDATE
I got an Error mounting /data when I tried to format the /data and when I tried to intall the Mexico retail rom I got a "set_perm: some changes failed E:Error in /storage/sdcard1/Atrix HD Mexico Retail 4.1.2.zip (Status 7) Installation aborted."
UPDATE
I formatted /data and /data media in Philz Touch and then it started mounting /data so I wiped and install PAC rom and it booted up just fine.
I think I solved my no Baseband Problem. I could see IMEI in Fastboot but not in OS. With Sense roms it boot looped no radio. With OneDroid I could access the OS no bootloop but no baseband no IMEI. Im with Bell Canada. Someone posted an RUU for bell 129. Ran that, no success still bootloop. I flashed GE 4.4.2 firmware, erase cache, reboot. Then Flashed flashed Philz M7UL recovery, then flash OneDroid. I did all of this with NO SIM installed. Then let it boot configured the options. Chose skip Cyan, Chose Skip Google Acct then Airplane mode then inserted Sim, then took off Airplane mode. Hope this helps!
Ih guys today i decide to install lineage os on my PRA LX-1
i've simply unlock bootloader, install twrp 3.1.1-2 from xda post, do a backup of my vodafone branded rom (cus,
vendor,product,system,boot) and flashing lineage os 14.1 (changed the filesystem of data to ext4) ofter booting everythinks works flawlessy except sim card than can connect in LTE but have signial lost every 2 minutes . I havent found a solution online about sim card problem and i decided to roll back to stock. I've formatting data in twrp in f2fs, restore backup but the problem of sim card it's persistent. I've try download the update.app form my phone extract the system boot recovery.img, flashing it from fastboot do a data factory reset from stock recovery but the rom don't boot up.Ihave retried to factory reset but stuck on 99%. After i push update.app in dload folder and do the combination keys for auto update, it says theres a proble to system go to emui.com ecc
Anyone have the same problem? please help me ( and sorry for my bad english )
EDIT: I have solved the problem, the network doesn't work with lineage os why the cus partition of my Vodafone stock rom isn't compatible. I roll back to stock and flash unbranded stock rom with root from post of haky 68 and everithing works well without problem or NFC wakeup! Thanks haky 68!
Hi,
I was somehow able to get the zenfone 4 detected by computer, then flashed the RAW image. It successfully booted to ZenUI. Due to bloatware I decided to flash CM12.1, but after flashing CM, WIFI & IMEI having problems.
So, I reflashed the RAW image. But, I'm getting same IMEI (*wrong*) for both slots & Wifi isn't working.
So, I can't re-unlock the bootloader & flash root.
Is there any way to fix this mess???
Can I flash 'mmcblk0p3.img' available somewhere on internet??
I don't have 'mmcblk0p3' backup of my device.
My device is bootloader unlocked not rooted
while trying to root i accidentally flashed twrp which made it always booting to twrp i wiped,formated using twrp to get my device back (iam a beginner and my first day on fastboot)
then i tried flashing different boot.img files to boot into android but none worked
then tried to flash stockrom using mi flash tool but it is showing error no such partition
please help me get back my phone please
Try this / these methods and report back:
https://forum.xda-developers.com/mi-a2/how-to/guide-how-to-flash-custom-roms-stuff-t3876375
Edit: Also, from memory, TWRP has boot fix and factory reset options - you can try those first.