LineageOS 14.1 doesn't support BLE with Huawei bluetooth printer.... - Galaxy Tab S General

Hello,
I bought a Huawei Printer bluetooth, but I was not able to be connected.
I had this message:
"BLE transfer is not supoprted"
I formatted, nothing. I installed Resurrection ROM, nothing...
But, I was able to be connected with my bluetooth headphone, speakers, smartwatch
So, I installed Samsung Stock ROM 6.0 and it work...
Wha's the problem?
Thank you

Related

[Q] Lollipop 5.1 bluetooth error

well, my problem is with 5.1, using nightly CM or Resurrection or soak test 5.1, im not able to connect to my car radio... others bluetooth devices yes but the car radio does not even shows up

Having hotspot tethering issue after upgrade to Pie

Hi everyone,
I was successful update OTA of Pie on my XZ2. I have a problem to connect hotspot tethering from my XZ2 to laptop.
Technically, it's show that my XZ2 is connected to laptop but "no internet"
I have try a reset password, reboot both phone and laptop but it is no luck.
Have any members here are having this problem like me? Please help to advise.
With regards,
imkr
I have same hotspot difficulty with pie. Devices connect to hotspot but receive no internet - and there seems to be no answers
Weird.
It works at my site.
Bluetooth and USB tethering.
H8296 rev2
German h8266 firmware.
Full wipe and flash with newflasher.
Using Linux Mint Cinnamon x64 19.0 on a ThinkPad T460P.
Usb3.0 & Bluetooth 4.1
weird and annoying.
usb tethering the same. Connects but wont give access with any device I care to try (other androids, laptop pc, desktop pc, linux, windows...)
My device - Syberia ROM on redmi note 4X (mido) - tried 2 other pie based roms with the same outcome.
I've had to revert to miui 10 beta as I need a hotspot...
forjustin said:
weird and annoying.
usb tethering the same. Connects but wont give access with any device I care to try (other androids, laptop pc, desktop pc, linux, windows...)
My device - Syberia ROM on redmi note 4X (mido) - tried 2 other pie based roms with the same outcome.
I've had to revert to miui 10 beta as I need a hotspot...
Click to expand...
Click to collapse
WORK-AROUND : Managed to Wi-Fi tether using AdGuard VPN (which isn't really a VPN) and VPN Hotspot app - Both from xda. The data is coming through, YAY! now I can keep Syberia!
I think I've been lucky, I have a UK customised Rev3 H8216 and have hand none of these issues.
However I did get the banding on my screen ( after Pie update), I powered off my phone over night and it's not appeared since.
My point is that no matter rev version you have, There's a problem somewhere in the XZ2
Guys,
I could access internet via tethering hotspot by now.
I changed device name, new password and paired with my laptop. Then, rebooted again and again.
I am not sure if this few settings worked. It's work in my case in Cambodia.
Cheers,
MKR

Music plus video sound only working via bluetooth after update

Hi,
I recently updated my phones lineage os 15 to the newest version. Out of some reason after this update my music player plus my video players are only playing music, if I connect them via bluetooth to an external speaker or headphone. The headphone jack is not working anymore and the phones loudspeakers are inopparable for music (for notifications and calls they work fine...). I did a clean re-install of lineage os (format and advanced wipe) but the problem still is there. Could someone please help me out with this problem? Thanks in advance!
Might it be, that I will have to update my firmware to make the phone compatible with newer versions of Lineage OS?
Did solve the problem myselfe. A update on the latest firmware version for the Mi Mix helped. The device is working fine now.

[HELP] My phone won't find my bluetooth headset

i had my galaxy j7 prime on android 8.1 and i decided to flash it, first i installed LineageOS and the problem started there, my phone stopped finding my headset, i thought that the problem was the rom so i ended up installing revolutionOS but the problem persisted, then i gave up and decided to get back to a stock firmware so i downloaded a rom for 7.0 wich i found on this forum and... nothing it still don't work
My bluetooth can find others phones and my headset is still found by other devices
what can i do?
soly23 said:
i had my galaxy j7 prime on android 8.1 and i decided to flash it, first i installed LineageOS and the problem started there, my phone stopped finding my headset, i thought that the problem was the rom so i ended up installing revolutionOS but the problem persisted, then i gave up and decided to get back to a stock firmware so i downloaded a rom for 7.0 wich i found on this forum and... nothing it still don't work
My bluetooth can find others phones and my headset is still found by other devices
what can i do?
Click to expand...
Click to collapse
Try install oxygen kernel first
Or
Your bluetooth device have a problem
Or
Missing some libaries on /system/lib
soly23 said:
i had my galaxy j7 prime on android 8.1 and i decided to flash it, first i installed LineageOS and the problem started there, my phone stopped finding my headset, i thought that the problem was the rom so i ended up installing revolutionOS but the problem persisted, then i gave up and decided to get back to a stock firmware so i downloaded a rom for 7.0 wich i found on this forum and... nothing it still don't work
My bluetooth can find others phones and my headset is still found by other devices
what can i do?
Click to expand...
Click to collapse
If your bluetooth device doesnt have any problem,flash correctly latest oreo firmware for your model through odin and check

S10 /Lineage os 18.1/AA Issues connecting to Car

Hi All,
Im have a S10 running Linux4's unofficial Lineage os 18.1 and I cannot seem to get the AA to connect to the car (Mazda 2021) .
The app runs on the phone, but when plugged in the infotainment system says it cannot connect to android auto.
Ive tried a bunch of different roms, all have the same outcome, i've tried the downgrade to 6.3 (Android Auto 6.3.611314) but that still produces the same error.
Ive installed magisk to run AA AIO toolbox, but that crashes once you click the I understand button (it gets SU) .
Is there anything im missing? Where can I see the error log?
If I go back to stock AA starts working again, but I lose lineage which would suck.

Categories

Resources