Hey guys. i guess i bricked my handy ? It just boots into fastboot. twrp is installed but i cant get into it. I tried to flash global vendor over the xiaomi.eu rom and after that it just boots into fastboot.
How can i fix it ?
I tried to get into twrp with vol+ and pwr . but still gets fastboot.
You'll have to reflash original fastboot ROM and make sure you check on CLEAN ALL to avoid bootloader relock
Sent from my Redmi K20 Pro using Tapatalk
i cant find a rom. i searched in google but i dont know which one i can use
pboden83 said:
i cant find a rom. i searched in google but i dont know which one i can use
Click to expand...
Click to collapse
https://xiaomifirmwareupdater.com/miui/
Sent from my Redmi K20 Pro using Tapatalk
ty, i try it and report back.
pboden83 said:
i cant find a rom. i searched in google but i dont know which one i can use
Click to expand...
Click to collapse
https://xiaomifirmwareupdater.com/miui/
try to look there. Just insert the model "mi 9t pro" and look for the version that fits your devices (EEA, global, etc.). Just make sure to download the "fastboot" ROM and not the "recovery".
i downloaded fastboot rom and flashed it with miflash. but it dont finish. it is still in progress since 1200 seconds.
pboden83 said:
i downloaded fastboot rom and flashed it with miflash. but it dont finish. it is still in progress since 1200 seconds.
Click to expand...
Click to collapse
Just be patient. Depends on your computer it can take very long
maybe it is amd?
I read that you have to take intel pcs for some things
pboden83 said:
maybe it is amd?
I read that you have to take intel pcs for some things
Click to expand...
Click to collapse
As far as I know you should be OK with AMD. I believe it's only the unlock tool that doesn't like AMD Ryzen PCs.
For me it normally takes between 650 - 700 minutes to fastboot flash. Are the USB ports on your PC USB 2 or better? Have you got a good quality USB cable?
Use the cable that came with the phone and try a different USB port or even a different PC if you've got access to one.
it still flashes.... 8700 seconds now. I used the original usb cable and its usb.3.0.
Status is $for /F ´´tokens=2 delims=: ´´%i in (fastboot -s f24711ba getvar anti 2>&1 |findstr /r /c:´´anti:´´) do (set version=%i)
pboden83 said:
it still flashes.... 8700 seconds now. I used the original usb cable and its usb.3.0.
Click to expand...
Click to collapse
Nah that's too much lol, try USB 2
Sent from my Redmi K20 Pro using Tapatalk
pboden83 said:
it still flashes.... 8700 seconds now. I used the original usb cable and its usb.3.0.
Status is $for /F ´´tokens=2 delims=: ´´%i in (fastboot -s f24711ba getvar anti 2>&1 |findstr /r /c:´´anti:´´) do (set version=%i)
Click to expand...
Click to collapse
It shouldn't take that long, it usually throws a error at the end but phone boots, usually around 400sec for me. If you're still stuck on fastboot try reflash a few different versions of twrp, our phones are veryyyy finicky. Don't worry though if you can reach fastboot or recovery your phone will be fine.
i installed recovery a few times but i cant get into it.
i restartet the flash and it sees different now, maybe it works now
it worked... puhh ty very much ... i was so hopeless
pboden83 said:
i installed recovery a few times but i cant get into it.
i restartet the flash and it sees different now, maybe it works now
Click to expand...
Click to collapse
Also to add sometimes auto rotate and pop up camera breaks after flashing, just flash a twrp with persist partition and flash the persist.img someone else posted around here somewhere. Keep us updated if it works
hello im in the same problem, i flash the firmware from the provided link, got the succesful screen in miflash, but i still in fastboot loop, is there anything else to do?
thanks in advance.
Niyolpaki said:
hello im in the same problem, i flash the firmware from the provided link, got the succesful screen in miflash, but i still in fastboot loop, is there anything else to do?
thanks in advance.
Click to expand...
Click to collapse
You need to install the whole ROM and not only the firmware
eliezerjk90 said:
You need to install the whole ROM and not only the firmware
Click to expand...
Click to collapse
so, the links from https://xiaomifirmwareupdater.com/miui/ are just the firmware?
and how to install the rom, i cant get into recovery, just fastboot
sorry for the noob question and thanks for your answer.
Niyolpaki said:
so, the links from https://xiaomifirmwareupdater.com/miui/ are just the firmware?
and how to install the rom, i cant get into recovery, just fastboot
sorry for the noob question and thanks for your answer.
Click to expand...
Click to collapse
Did you download the files which 3,5 gb size? That's the one you need.
The tutorial for installation :
https://c.mi.com/thread-2285346-1-0.html
Related
:crying: I was trying to root the phone with twrp in fastboot mode, but all of a sudden my pc shut down while still in fastboot twrp mode. and now my phone wont turn on. I cant boot into recovery, fastboot, no charge led, please guys help me.
Is it recognized when you plug it to your computer ?
mysa50 said:
Is it recognized when you plug it to your computer ?
Click to expand...
Click to collapse
it is recognized like qualocom 9008 usb bulk somethink like it, i dont remember, please help me and sorry for late reply I/m litterelly crying right now, please help me
mysa50 said:
Is it recognized when you plug it to your computer ?
Click to expand...
Click to collapse
My Pc recogonizes it as " Qualcomm HS-USBQDloader 9008 (COM10) "
https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Good news so. Just download the fastboot version of the miui rom you want, download miflash tool (Google it) and use it to flash the rom. You can find full steps by step somewhere in the xda threads.
mysa50 said:
Good news so. Just download the fastboot version of the miui rom you want, download miflash tool (Google it) and use it to flash the rom. You can find full steps by step somewhere in the xda threads.
Click to expand...
Click to collapse
Sorry but i cant get into fastboot mode or recovery mode, will mi flash work without getting into fastboot mode?
vicky 1859 said:
Sorry but i cant get into fastboot mode or recovery mode, will mi flash work without getting into fastboot mode?
Click to expand...
Click to collapse
No need to enter in fastboot mode with miflash that's the point with this method. But you'll loose everything on your phone
mysa50 said:
No need to enter in fastboot mode with miflash that's the point with this method. But you'll loose everything on your phone
Click to expand...
Click to collapse
Thank you, will try now, but will take some time to download the rom, will definitely update on the process once i tried it. i really appreciate your reply, hope this works. thanks once again.
a million thanks
It worked, You are a life saver,:good::good::good::good: thank you very much for your assistance.
I would first recommend you to download any Mi 5 Fastboot image from MIUI forums than install it in Fastboot mode (Hold Volume down+ Power button) through ADB or MIflash tool.
Afterwards recharge your phone fully and then proceed to install TWRp and custom ROM (provided you have unlocked bootloader)
vicky 1859 said:
It worked, You are a life saver,:good::good::good::good: thank you very much for your assistance.
Click to expand...
Click to collapse
I have exactly the same problem
Can you tell us PLZ what you did?
And what tools are required
< new Mi5
ty
Sir Mohd said:
I have exactly the same problem
Can you tell us PLZ what you did?
And what tools are required
< new Mi5
ty
Click to expand...
Click to collapse
http://en.miui.com/a-234.html
Guys I wanted to install custom roms in my Xiaomi mi 5 , therefore got my bootloader unlocked and installed twrp recovery through adb . After that , I wiped my miui ROM after taking its backup and tried flashing aoscp ROM , which didn't flash . Thereafter , I restored the previous ROM and now whenever I reboot , it gets stuck on the initial startup screen where Mi logo is there .
Kindly suggest on what to do next since this is very worrying issue for me . Regards
Hey guys i have a mi5 that is not turning on, it was running on lineage os 16 or 17 not sure, my brother had this phone and he bricked it while updating via twrp and now only bootloader is opening and that too not for more than 30 secs, any solutions for this ?
Is it flashed, what rom is it on? Please clarify more information than just your phone model, thank you.
Keno_I said:
Is it flashed, what rom is it on? Please clarify more information than just your phone model, thank you.
Click to expand...
Click to collapse
Updated
Simran62 said:
Hey guys i have a mi5 that is not turning on, it was running on lineage os 16 or 17 not sure, my brother had this phone and he bricked it while updating via twrp and now only bootloader is opening and that too not for more than 30 secs, any solutions for this ?
Click to expand...
Click to collapse
Did you try using mi flash tool to flash the stock rom?
Keno_I said:
Did you try using mi flash tool to flash the stock rom?
Click to expand...
Click to collapse
Nope, i never have used that tool, and im not sure if it will work cause as i said bootloader only opens for a few seconds
Simran62 said:
Nope, i never have used that tool, and im not sure if it will work cause as i said bootloader only opens for a few seconds
Click to expand...
Click to collapse
Hmm, try it.
Just search it on google or XDA.
Simran62 said:
Nope, i never have used that tool, and im not sure if it will work cause as i said bootloader only opens for a few seconds
Click to expand...
Click to collapse
If that is the case, than you probably don't have proper drivers for Mi 5 installed, download MIFLASH UNLOCK 3.5.1108.44 from here https://xiaomifirmware.com/downloads/download-mi-unlock-3-5-1108-44/
Double click on MiUsbDriver and install fastboot driver. Now as Keno_I said you can try to install original fastboot rom via flash tool or latest TWRP recovery from cmd prompt on your computer.
Success, turned out that the usb was clogged with dust, and mi flash tool worked. Thanks for the support guys
I flashed a twrp recovery in my poco m4 pro then using fastboot mode but i can't seem to flash it through "fastboot flash recovery", then i tried "fastboot flash boot" then it flashed the twrp. The problem is i went to reboot and clicked slot b then i rebooted my phone and it starts to bootloop and i can't enter the recovery and fastboot now. Please help me i can't even do anything to my phone now
earljames27 said:
I flashed a twrp recovery in my poco m4 pro then using fastboot mode but i can't seem to flash it through "fastboot flash recovery", then i tried "fastboot flash boot" then it flashed the twrp. The problem is i went to reboot and clicked slot b then i rebooted my phone and it starts to bootloop and i can't enter the recovery and fastboot now. Please help me i can't even do anything to my phone now
Click to expand...
Click to collapse
After draining the battery and trying the fastboot or recovery configurations as soon as you plugged into wall charger, still does not work?
LR7875 said:
After draining the battery and trying the fastboot or recovery configurations as soon as you plugged into wall charger, still does not work?
Click to expand...
Click to collapse
still bootlooping now, it has a charge left. Will it go to fastboot after draining the battery? i can't do anything now but to wait
earljames27 said:
still bootlooping now, it has a charge left. Will it go to fastboot after draining the battery? i can't do anything now but to wait
Click to expand...
Click to collapse
Maybe, idk, just let bootloop until it turns off, leave it for 1 day more, then try fastboot
LR7875 said:
Maybe, idk, just let bootloop until it turns off, leave it for 1 day more, then try fastboot
Click to expand...
Click to collapse
ok mate i'll let you know if it works.
LR7875 said:
Maybe, idk, just let bootloop until it turns off, leave it for 1 day more, then try fastboot
Click to expand...
Click to collapse
still not booting in fastboot mode or recovery mode after draining the battery, is there any way how to solve this?
No warranty by any chance? Then you might need choose between to pay a hundred bucks for an authorized account for EDL flashing, or to sold it as is for parts.
LR7875 said:
No warranty by any chance? Then you might need choose between to pay a hundred bucks for an authorized account for EDL flashing, or to sold it as is for parts.
Click to expand...
Click to collapse
finally fixed it with the help of an indian video lol indian saves the day, but anyways thanks for the advice mate
earljames27 said:
finally fixed it with the help of an indian video lol indian saves the day, but anyways thanks for the advice mate
Click to expand...
Click to collapse
Video link would be cool for other users then.
I also got the issue and managed to fix it with an exploit for Mediatek chips.
For others: feel free to DM if you have this issue (until someone post a good and understandable tutorial).
Eidenz said:
Video link would be cool for other users then.
I also got the issue and managed to fix it with an exploit for Mediatek chips.
For others: feel free to DM if you have this issue (until someone post a good and understandable tutorial).
Click to expand...
Click to collapse
This is the link for the giga chad indian tutorial lol
earljames27 said:
This is the link for the giga chad indian tutorial lol
Click to expand...
Click to collapse
Not work, Bootloop on Poco M4 Pro 5G. All drivers required are installed on pc and i connect the phone but the mtkclient not recognize him (holding vol down it recognize on brom mode, but i cannot do anything useful in this mode). Also don't changed a thing after write boot.img using brom mode.
Before i flashed an gsi rom (pixel experience plus 12.1(ponces)) with fastbootd after unlocking bootloader, doing everything right (the stock rom is very buggy).
And it started the bootloop.
I'm waiting the phone drains the battery to try to go to fastboot mode.
Update: I fixed it.
nice
Maroedes said:
Not work, Bootloop on Poco M4 Pro 5G. All drivers required are installed on pc and i connect the phone but the mtkclient not recognize him (holding vol down it recognize on brom mode, but i cannot do anything useful in this mode). Also don't changed a thing after write boot.img using brom mode.
Before i flashed an gsi rom (pixel experience plus 12.1(ponces)) with fastbootd after unlocking bootloader, doing everything right (the stock rom is very buggy).
And it started the bootloop.
I'm waiting the phone drains the battery to try to go to fastboot mode.
Update: I fixed it.
Click to expand...
Click to collapse
how did you fix it?
ps: i literally have the same situation of pixel experiance gsi and bootloop.
So my problem is that i tried to lock my Mi 11 Ultra (it was rooted aswell with magisk) and than the message came The system has been destroyed and now its locked and destroyed tried it even with the miflash tool to flash the rom but didnt worked because its locked and the same for the miunlock tool so i dont know what to do. I just cant anymore i was like nearly crying because its so ****ed up so i would love it if you can help me guys. (IF YOU GUYS NEED ADDITIONAL INFORMATIONS TELL ME PLEASE)
Find someone who can flash using an edl flash. Yes it will cost a few dollars but it will work again. Remember, do not lock the bootloader unless you are on the original rom branch.
Sathelp said:
Find someone who can flash using an edl flash. Yes it will cost a few dollars but it will work again. Remember, do not lock the bootloader unless you are on the original rom branch.
Click to expand...
Click to collapse
where can i find those people`?
On telegram or search in this forum. Some have used these guys. I have, cost me £23 but all good after. I'm just not allowed to advertise them. I have sent info on message to you.
Its not a bricked phone.
I guess you can only install that ROM version on locked bootloader phone which it had originally.
Like CN ROM can be flashed on CN version only.
And can you try flashing again by removing the script which commands to erase boot, it would be in top lines just delete that line and try flashing again.
And how were you trying to lock it with magisk installed( with fastboot lock command?).
gursewak.10 said:
Its not a bricked phone.
I guess you can only install that ROM version on locked bootloader phone which it had originally.
Like CN ROM can be flashed on CN version only.
And can you try flashing again by removing the script which commands to erase boot, it would be in top lines just delete that line and try flashing again.
And how were you trying to lock it with magisk installed( with fastboot lock command?).
Click to expand...
Click to collapse
it was on global rom but the phone is from china i think so. And what script do you mean? And yes i typed in the cmd fastboot oem lock and after that it came that the system is destroyed
find your original rom (eg- eea,global,ind,eu).... u can only unlock your device using previously used mi account.... use that account... if you failed then try with older version mi unlocker....
MartMartiZz said:
it was on global rom but the phone is from china i think so. And what script do you mean? And yes i typed in the cmd fastboot oem lock and after that it came that the system is destroyed
Click to expand...
Click to collapse
Then download global rom and there are some files in the folder with .bat I guess it would be cleanall.bat something like that open in notepad and try removing the whole line containing erase boot_ab. It will be around in top lines.
You don't need miflash tool to flash. Just save that file after removing the lines and double click it, it will start flashing the rom.
Miflash is just gui to do the same.
gursewak.10 said:
Then download global rom and there are some files in the folder with .bat I guess it would be cleanall.bat something like that open in notepad and try removing the whole line containing erase boot_ab. It will be around in top lines.
You don't need miflash tool to flash. Just save that file after removing the lines and double click it, it will start flashing the rom.
Miflash is just gui to do the same.
Click to expand...
Click to collapse
doesnt work it just opens then it closes. same with the mi flash tool it says flash done but nothing happens
Try Go to recovery and erase data and reboot
gursewak.10 said:
Try Go to recovery and erase data and re
gursewak.10 said:
Try Go to recovery and erase data and reboot
Click to expand...
Click to collapse
what recovery? if you mean on phone it doesnt work
Click to expand...
Click to collapse
Reboot phone to recovery using vol and power key,
gursewak.10 said:
Reboot phone to recovery using vol and power key,
Click to expand...
Click to collapse
dont work. it just says the system is destroyed
MartMartiZz said:
doesnt work it just opens then it closes. same with the mi flash tool it says flash done but nothing happens
Click to expand...
Click to collapse
Try it with clean all and lock on miflash tool
gursewak.10 said:
Try it with clean all and lock on miflash tool
Click to expand...
Click to collapse
But you know that I want to unlock my phone so why should I do that. But it doesn't work so it doesn't matter
MartMartiZz said:
But you know that I want to unlock my phone so why should I do that. But it doesn't work so it doesn't matter
Click to expand...
Click to collapse
well it will be a matter of minutes if it works again to unlock it again, i don't know why its not working for you. one last resort is try unlocking phone using mi unlock . try using diff. version sometimes its miunlock tool version giving errors.
gursewak.10 said:
well it will be a matter of minutes if it works again to unlock it again, i don't know why its not working for you. one last resort is try unlocking phone using mi unlock . try using diff. version sometimes its miunlock tool version giving errors.
Click to expand...
Click to collapse
I am gonna try it. Is it possible that if I'm waiting for like a week that I can unlock it with miunlock for some reason?
MartMartiZz said:
I am gonna try it. Is it possible that if I'm waiting for like a week that I can unlock it with miunlock for some reason?
Click to expand...
Click to collapse
How did you unlocked it in the past?
If you already unlocked it in the past there is no time required to wait to unlock again.
gursewak.10 said:
How did you unlocked it in the past?
If you already unlocked it in the past there is no time required to wait to unlock again.
Click to expand...
Click to collapse
it was unlocked by default for some reason. i think its a china phone with global rom
Download CN fastboot rom .
Try flash again by Miflash or fastboot .
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
estebg_1300 said:
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
Click to expand...
Click to collapse
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Bro, do you know what to put in download agent, scatter loading file and authenticator file?, it gives me an error
NOSS8 said:
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
Click to expand...
Click to collapse
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
estebg_1300 said:
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
Click to expand...
Click to collapse
In the 1st post you say you have installed the TWRP.
See here
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/...otloop-hard-brick-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
NOSS8 said:
En la primera publicación dices que tienes instalado el TWRP.
Mira aquí
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/closed-evergo-100-working-poco-m4-pro-5g-redmi-note-11t-india-miui-all-mediatek-devices-bootloop-hard- ladrillo-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Click to expand...
Click to collapse
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
estebg_1300 said:
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
Click to expand...
Click to collapse
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
NOSS8 said:
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
Click to expand...
Click to collapse
how I do the last that you say?
estebg_1300 said:
how I do the last that you say?
Click to expand...
Click to collapse
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
NOSS8 said:
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
Click to expand...
Click to collapse
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
estebg_1300 said:
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
Click to expand...
Click to collapse
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
NOSS8 said:
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
Click to expand...
Click to collapse
and you know anyone that know about mtk and can help me? Thanks btw
estebg_1300 said:
and you know anyone that know about mtk and can help me? Thanks btw
Click to expand...
Click to collapse
See here
https://forum.xda-developers.com/f/redmi-note-9-guides-news-discussion.10961/
Maybe him
VD171
forum.xda-developers.com
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
exactly what I did here, u could do it bro:
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Tajil said:
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
Click to expand...
Click to collapse
Thanks, but read and trying translate to spanish for english, this error appears in every time that i try to put the phone in my pc
Tajil said:
exactly what I did here, u could do it bro:
Click to expand...
Click to collapse
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
estebg_1300 said:
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
Click to expand...
Click to collapse
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Tajil said:
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Click to expand...
Click to collapse
now I have this problem...
Hi everyone, days ago I posted on the forum that I had a bootloop, I could not enter fastboot or recovery, well, I managed to install the rom by sp flash tool without errors, but now I get the error "nv data is corrupted" as seen in the video that I attach, anyone know of a viable solution? What is free and do not have any other problem and my phone back to normal? Because I can enter fastboot and maybe download or twrp or download pixel experience or a rom, What do you recommend?