Related
Hi xda!
I recently got a HTC One from a friend, as my old phone was worn out. It turned out he had rooted it, tampered with it, the whole nine yards. I was not told he had rooted it, so I accepted a prompt asking me to update the phone to what I believe was 4.4.2, KitKat. I now realize that should not have been done. When the phone restarted it went to the HTC startup logo, into a kind of blue screen (not the BSOD), the Google logo flashed on the screen for 0.5 seconds, and then it got stuck on this weird blue/turqoise screen. Nothing happened.
I called my friend, he told me he rooted it etc., and that I should try a factory reset, and if that didn't work, complete reset (including the system folder wipe). That obviously didn't work, but I didn't know any better as I have never touched a rooted phone in my life, and I'm thus a complete noob when it comes to terminology, what steps to take and so on.
Now I have a phone with no OS, stuck at the HTC logo when I start it normally, and all I can do is boot up into bootloader. I can also access TWRP. I have installed HTC Sync on my laptop, but the phone is not detected properly (meaning, the "device connected" sound is played, and I can find "Android device" in device manager, but the HTC Sync can't find the phone) when connected through a USB. It is not the USB that came with the phone. I also installed Squabbi's HTC One toolkit, which basically is the one-click interface of pushing revone etc. to the phone. Problem is, "error, device not detected".
I've browsed around for a good six hours without any luck, other than that I've started to understand how this is all connected.
Phone is
*TAMPERED*
*UNLOCKED*
M7_UL
S-ON
HBOOT 1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
I pray to the mighty tech gods of xda to help me out. I looked for similar threads, couldn't find any that were simple and similar enough for me to understand. I must admit I'm very keen to learn this, so if someone know of any place where basic terminology is explained, I'd really appreciate that. Other than that, a step by step instruction on how to proceed from this cluster**** would also be highly appreciated (what I need installed on my laptop, where I can find ROM's, what flashing means etc.).
Thank you in advance!
PrimalMK said:
Hi xda!
I recently got a HTC One from a friend, as my old phone was worn out. It turned out he had rooted it, tampered with it, the whole nine yards. I was not told he had rooted it, so I accepted a prompt asking me to update the phone to what I believe was 4.4.2, KitKat. I now realize that should not have been done. When the phone restarted it went to the HTC startup logo, into a kind of blue screen (not the BSOD), the Google logo flashed on the screen for 0.5 seconds, and then it got stuck on this weird blue/turqoise screen. Nothing happened.
I called my friend, he told me he rooted it etc., and that I should try a factory reset, and if that didn't work, complete reset (including the system folder wipe). That obviously didn't work, but I didn't know any better as I have never touched a rooted phone in my life, and I'm thus a complete noob when it comes to terminology, what steps to take and so on.
Now I have a phone with no OS, stuck at the HTC logo when I start it normally, and all I can do is boot up into bootloader. I can also access TWRP. I have installed HTC Sync on my laptop, but the phone is not detected properly (meaning, the "device connected" sound is played, and I can find "Android device" in device manager, but the HTC Sync can't find the phone) when connected through a USB. It is not the USB that came with the phone. I also installed Squabbi's HTC One toolkit, which basically is the one-click interface of pushing revone etc. to the phone. Problem is, "error, device not detected".
I've browsed around for a good six hours without any luck, other than that I've started to understand how this is all connected.
Phone is
*TAMPERED*
*UNLOCKED*
M7_UL
S-ON
HBOOT 1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
I pray to the mighty tech gods of xda to help me out. I looked for similar threads, couldn't find any that were simple and similar enough for me to understand. I must admit I'm very keen to learn this, so if someone know of any place where basic terminology is explained, I'd really appreciate that. Other than that, a step by step instruction on how to proceed from this cluster**** would also be highly appreciated (what I need installed on my laptop, where I can find ROM's, what flashing means etc.).
Thank you in advance!
Click to expand...
Click to collapse
well a lot of the work seems to already be done
your unlocked / rooted which means you should have a custom recovery installed.
boot the phone by holding the power + volume down
this will bring up the bootloader. use the volume key to choose recovery aand hit the power button. when you boot into recovery come back and report the name and version of recovery. I.E. Teamwin recovery 2.5.0.0 or clockworkmod 6.0.3.1 ...I'll be here the next couple hrs
clsA said:
well a lot of the work seems to already be done
your unlocked / rooted which means you should have a custom recovery installed.
boot the phone by holding the power + volume down
this will bring up the bootloader. use the volume key to choose recovery aand hit the power button. when you boot into recovery come back and report the name and version of recovery. I.E. Teamwin recovery 2.5.0.0 or clockworkmod 6.0.3.1 ...I'll be here the next couple hrs
Click to expand...
Click to collapse
Version of TWRP is 2.5.0.0. Currently trying to re-install an OS. Need one that the current version of TWRP can flash to the phone, as flashing a new version of TWRP does not work. I have no preferences when it comes to OS's. A stock OS (is OS and ROM the same thing?) would be fine.
Also, found out that doing stuff on a Windows 7 laptop was easier than on my own Windows 8. The phone is at least detected on the Windows 7, which means I will be able to flash stuff to it through cmd, something I wasn't able to do from the Windows 8.
PrimalMK said:
Version of TWRP is 2.5.0.0. Currently trying to re-install an OS. Need one that the current version of TWRP can flash to the phone, as flashing a new version does not work. I have no preferences. A stock OS (is OS and ROM the same thing?) would be fine.
Click to expand...
Click to collapse
Well your going to need adb / fastboot on your PC
use mine here >> https://www.dropbox.com/s/0wzwt8843zx27nh/Fastboot.zip
and install the HTC Drivers here >> http://www.mediafire.com/download/j55vk6qbbr6250c/HTCDriver_4.8.0.002.exe
unzip that to c:\ so you have c:\fastboot in windows explorer
now inside the folder you shift + right click / command prompt here
now you have a command prompt window type
fastboot getvar all
and post the result here / minus your serial number and IMEI
then i can find you the correct recovery and rom for your phone
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
PrimalMK said:
Also, found out that doing stuff on a Windows 7 laptop was easier than on my own Windows 8. The phone is at least detected on the Windows 7, which means I will be able to flash stuff to it through cmd, something I wasn't able to do from the Windows 8.
Click to expand...
Click to collapse
yes window 8 will be a problem till you get another hboot above 1.44/1.54
hboot 1.55 has no problem on windows 8 ( I use windows 8.1)
clsA said:
instructions
Click to expand...
Click to collapse
Downloaded fastboot, unzipped in c:
Drivers from that link are classed as malware. Trying to find earlier drivers/other mirror.
Find attachment.
Still looking for drivers. Apparently "every" browser blocks exe-files from being downloaded. Changed settings, managed to download it, run as admin. No response.
PrimalMK said:
Find attachment.
Still looking for drivers. Apparently "every" browser blocks exe-files from being downloaded. Changed settings, managed to download it, run as admin. No response.
Click to expand...
Click to collapse
this will work fine
just put TWRP and the Rom in the fastboot folder
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
Click to expand...
Click to collapse
clsA said:
this will work fine
just put TWRP and the Rom in the fastboot folder
Click to expand...
Click to collapse
error: cannot open 'openrecovery.......img'
What to do?
PrimalMK said:
error: cannot open 'openrecovery.......img'
What to do?
Click to expand...
Click to collapse
is it in the fastboot folder ?
clsA said:
is it in the fastboot folder ?
Click to expand...
Click to collapse
Yes, see screenshot.
PrimalMK said:
Yes, see screenshot.
Click to expand...
Click to collapse
is the command window in c:\fastboot ?
did you copy paste the command or try and type it ?
clsA said:
is the command window in c:\fastboot ?
did you copy paste the command or try and type it ?
Click to expand...
Click to collapse
My bad. Managed to run it, but then it crashes straight away. Can that have anything to do with the driver not installed?
PrimalMK said:
My bad. Managed to run it, but then it crashes straight away. Can that have anything to do with the driver not installed?
Click to expand...
Click to collapse
fastboot crashes ?
no if fastboot getvar worked it will all work
it's only 4 commands and your phone will be working
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
adb sideload rom.zip
sideload takes about 8 min
calculation icatkg
clsA said:
fastboot crashes ?
no if fastboot getvar worked it will all work
Click to expand...
Click to collapse
Restarted a couple of times etc. It worked. Will do the ROM thing now.
PrimalMK said:
Restarted a couple of times etc. It worked. Will do the ROM thing now.
Click to expand...
Click to collapse
great your about done ...your phone will be android 4.3 when it finishes
don't take any updates to the OS
cmd said it sent the ROM to the phone. I was in the TWRP adb sideload on my phone when it was transferred. Then that was it. 100% on cmd. Phone shut down. Suddenly discovered I had to install on the phone. WAT. I do so, then wait until completion. I anxiously restart the phone. It's alive again!
Really, thanks so much clsA! You made me a very happy person! :victory:
PrimalMK said:
cmd said it sent the ROM to the phone. I was in the TWRP adb sideload on my phone when it was transferred. Then that was it. 100% on cmd. Phone shut down. Suddenly discovered I had to install on the phone. WAT. I do so, then wait until completion. I anxiously restart the phone. It's alive again!
Really, thanks so much clsA! You made me a very happy person! :victory:
Click to expand...
Click to collapse
no problem, hit the thanks button
So I just got my shiny new Nokia 8 and it seems to be updated to the latest version of Pie. Reading through all the root forums/threads, I'm noticing a couple issues with my phone that I'm not seeing mentioned:
-In Dev settings, OEM unlocking is off and grayed out, I can't toggle it.
-When I try to access download mode/bootloader (volume down/plug in cable from pc) my screen does a little flashy thing and then goes straight to the battery percentage.
-I can ADB devices just fine and see the phone, when I ADB reboot bootloader, the phone gets stuck on a screen showing "powered by android'', with "download mode" in the upper left corner, and any fastboot commands return absolutely nothing.
Any tips or suggestions?
Many thanks
jgro1976 said:
So I just got my shiny new Nokia 8 and it seems to be updated to the latest version of Pie. Reading through all the root forums/threads, I'm noticing a couple issues with my phone that I'm not seeing mentioned:
-In Dev settings, OEM unlocking is off and grayed out, I can't toggle it.
-When I try to access download mode/bootloader (volume down/plug in cable from pc) my screen does a little flashy thing and then goes straight to the battery percentage.
-I can ADB devices just fine and see the phone, when I ADB reboot bootloader, the phone gets stuck on a screen showing "powered by android'', with "download mode" in the upper left corner, and any fastboot commands return absolutely nothing.
Any tips or suggestions?
Many thanks
Click to expand...
Click to collapse
- you cant toggle it because you have not unlocked the bootloader. Sometimes even after you unlock it it will be greyed out, which isnt of importance. To unlock the bootloader downgrade to Oreo November update by sideloading the relevant ROM, then follow the the official HMD instructions.
- Make sure USB debugging is turned on under developer options.
- Are you attempting to boot into the OS or recovery here? Abd reboot is enough to boot into your system. To boot into recovery use adb reboot recovery. Or do it manually using the keys.
Ok, everything I've read so far says to make sure OEM unlock is enabled before you do anything else, so you've confused me now. And none of the guides talk about sideloading the ROM, so you've thrown a new twist with that as well.
USB debugging is enabled, and my computer sees the device via adb devices, but if I try adb reboot recovery, all I get is the little android icon with the red triangle over him, and if I try adb reboot bootloader, basically nothing happens. And I wasn't trying to boot into the OS or recovery, I'm not a noob but maybe this phone is just different enough from what I'm used to I guess.
So basically I'm stuck right now, can't boot into recovery, can't sideload a ROM, can't boot into the bootloader/download mode either.
MDV106 said:
- you cant toggle it because you have not unlocked the bootloader. Sometimes even after you unlock it it will be greyed out, which isnt of importance. To unlock the bootloader downgrade to Oreo November update by sideloading the relevant ROM, then follow the the official HMD instructions.
- Make sure USB debugging is turned on under developer options.
- Are you attempting to boot into the OS or recovery here? Abd reboot is enough to boot into your system. To boot into recovery use adb reboot recovery. Or do it manually using the keys.
Click to expand...
Click to collapse
Actually, thank you, you got me thinking and I was able to get downgraded to the Oreo, got my code from Nokia and unlock.key, now the only thing I'm still having a hard time with is my computer won't detect my phone in fastboot mode. Works just fine in normal ADB commands, but no fastboot...
You'd think my drivers are all fine and that since ADB sees the device, but maybe not?
jgro1976 said:
Ok, everything I've read so far says to make sure OEM unlock is enabled before you do anything else, so you've confused me now. And none of the guides talk about sideloading the ROM, so you've thrown a new twist with that as well.
USB debugging is enabled, and my computer sees the device via adb devices, but if I try adb reboot recovery, all I get is the little android icon with the red triangle over him, and if I try adb reboot bootloader, basically nothing happens. And I wasn't trying to boot into the OS or recovery, I'm not a noob but maybe this phone is just different enough from what I'm used to I guess.
So basically I'm stuck right now, can't boot into recovery, can't sideload a ROM, can't boot into the bootloader/download mode either.
Click to expand...
Click to collapse
Bootloader, unlocked! Now if I can get the rest of my home wireless **** to work this well/easily, thank you for getting me pointed in the right direction, all good here (I hope).
jgro1976 said:
Actually, thank you, you got me thinking and I was able to get downgraded to the Oreo, got my code from Nokia and unlock.key, now the only thing I'm still having a hard time with is my computer won't detect my phone in fastboot mode. Works just fine in normal ADB commands, but no fastboot...
You'd think my drivers are all fine and that since ADB sees the device, but maybe not?
Click to expand...
Click to collapse
jgro1976 said:
Bootloader, unlocked! Now if I can get the rest of my home wireless **** to work this well/easily, thank you for getting me pointed in the right direction, all good here (I hope).
Click to expand...
Click to collapse
Im guessing you finally realised they after getting the android icon with the red triangle u have to press volume up and hold it then tap the power key to enter the recovery. Good to know you managed to unlock the bootloader eventually.
A lot of people have been having issues with fastboot, especially on Windows machines . Try restarting the shell or use a different USB port on your computer?also maybe try a different driver version and see if it helps.
So using a root app disabler I disabled "telephony service" and when I restarted it shutdown immediately, on the newest WW rom it doesnt have a recovery so I cant go in there and wipe to factory reset. Right now I'm getting slot_b is unbootable. My computer recognizes the phone as "Android Bootloader Interface" but when I run "adb devices" it doesnt show up and I cant run fastboot commands even though I'm plugged into the side usb port. Please help me.
trustedenemy said:
So using a root app disabler I disabled "telephony service" and when I restarted it shutdown immediately, on the newest WW rom it doesnt have a recovery so I cant go in there and wipe to factory reset. Right now I'm getting slot_b is unbootable. My computer recognizes the phone as "Android Bootloader Interface" but when I run "adb devices" it doesnt show up and I cant run fastboot commands even though I'm plugged into the side usb port. Please help me.
Click to expand...
Click to collapse
Was the boot img rooted, is that why you have no recovery? If so, just boot to fastboot mode and flash stock boot instead of root, that should have recovery
trustedenemy said:
So using a root app disabler I disabled "telephony service" and when I restarted it shutdown immediately, on the newest WW rom it doesnt have a recovery so I cant go in there and wipe to factory reset. Right now I'm getting slot_b is unbootable. My computer recognizes the phone as "Android Bootloader Interface" but when I run "adb devices" it doesnt show up and I cant run fastboot commands even though I'm plugged into the side usb port. Please help me.
Click to expand...
Click to collapse
Can you go to bootloader screen ?
If you can
Just use the full stock Rom
Flash it
---------- Post added at 04:45 PM ---------- Previous post was at 04:42 PM ----------
https://drive.google.com/file/d/1M2V1Jh2CS5vt1xbQYlDvhxfu0yB6hmZi/view
Download the Full Rom
Extract it
Use the exe file to install with bootloader screen
Ok that was able to get me back to recovery, I tried to wipe and then boot into android, didn't work got the "your device is corrupt and cannot be trusted and will not boot". Still isn't recognized in adb devices so I don't know how I would proceed from here. My device is the Tencent Edition if that helps with raw firmware/rom.
P.S Thank you guys so much for your help I really appreciate it.
trustedenemy said:
Ok that was able to get me back to recovery, I tried to wipe and then boot into android, didn't work got the "your device is corrupt and cannot be trusted and will not boot". Still isn't recognized in adb devices so I don't know how I would proceed from here. My device is the Tencent Edition if that helps with raw firmware/rom.
P.S Thank you guys so much for your help I really appreciate it.
Click to expand...
Click to collapse
Did you fix it ?
rowihel2012 said:
Did you fix it ?
Click to expand...
Click to collapse
No, I still cannot boot into android and it still isnt recognized in adb devices, but I can get into recovery now.
trustedenemy said:
No, I still cannot boot into android and it still isnt recognized in adb devices, but I can get into recovery now.
Click to expand...
Click to collapse
But you get fastboot mode, just plug the USB in side port and flash latest raw WW Rom.
Here's the link to 1908.21
https://drive.google.com/file/d/13Mgz9GhopE-DUsGT3N_5qC283cKkUxYb/view?usp=drivesdk
Once in fastboot mode (the first menu you see, before selecting recovery, start, power off etc is fastboot mode) check your device is recognised with fastboot devices cmd and then run flashall_AFT.cmd that'll get back your working rom . But also, delete or move the original zip from that same extracted folder, the raw rom with the same name confuses the flashall_AFT.cmd
So I flash the most recent firmware you linked and double checked in recovery that it was pushed to the device and it was, but when I try to boot into android I get the asus logo for a second and then it restarts and it will give me a screen that says "Your device is corrupt. It cant be trusted and will not boot" and then has a link to google support .
trustedenemy said:
So I flash the most recent firmware you linked and double checked in recovery that it was pushed to the device and it was, but when I try to boot into android I get the asus logo for a second and then it restarts and it will give me a screen that says "Your device is corrupt. It cant be trusted and will not boot" and then has a link to google support .
Click to expand...
Click to collapse
Did you let the raw rom flash entirely? It should take a minimum of 10 minutes... The phone should reboot twice (I think) as it completes... Maybe try again, but I'm not familiar with that message...
If the phone doesn't reboot, I would let it run for a half hour or so before rebooting...
There we go, I got it to work man, I was just being impatient with the firmware flash but now I got it to work I appreciate your help and patience so much let me got through and thank your comments and then you can flag a mod to take down this thread. Thank you
trustedenemy said:
There we go, I got it to work man, I was just being impatient with the firmware flash but now I got it to work I appreciate your help and patience so much let me got through and thank your comments and then you can flag a mod to take down this thread. Thank you
Click to expand...
Click to collapse
Excellent, glad you got it working again
trustedenemy said:
There we go, I got it to work man, I was just being impatient with the firmware flash but now I got it to work I appreciate your help and patience so much let me got through and thank your comments and then you can flag a mod to take down this thread. Thank you
Click to expand...
Click to collapse
Yes this way always fix bootloap problem
Thanks asus for this easy flashing
I received my new sony 1 ii and have checked and the bootloader can be unlocked and the phone can be rooted. I thought I was away to the races but I'm mystified. I can't get the phone to boot into fast boot.
I appears I have the drivers in place and the phone is recognized by the computer but no luck with fast boot.
I have searched and can't seem to find out why this is. I suspect some kind of driver issue with win10 but when I connect to the computer with the phone off and hold the up-volume nothing happens. I have also tried to boot into recovery mode and that does not work as well. Any help would be appreciated.
blkair445 said:
I received my new sony 1 ii and have checked and the bootloader can be unlocked and the phone can be rooted. I thought I was away to the races but I'm mystified. I can't get the phone to boot into fast boot.
I appears I have the drivers in place and the phone is recognized by the computer but no luck with fast boot.
I have searched and can't seem to find out why this is. I suspect some kind of driver issue with win10 but when I connect to the computer with the phone off and hold the up-volume nothing happens. I have also tried to boot into recovery mode and that does not work as well. Any help would be appreciated.
Click to expand...
Click to collapse
On Sony devices you need to power off and hold volume up and plug in the USB cable. That should leave the blue LED to indicate fastboot mode. I'm not 100% sure since it's been a while since I've messed around with Sony devices
Thanks for the input. I have done that and am still unable to action ADB - It is a little confusing since the phone only shows the blue light and nothing else.
If I normally boot the phone it will register as an ADB device. I also find it strange that it will not boot into recovery. The android icon flashes but when you release it boots to safe mode. I assume it is a driver issue but it is not revealing its self to me . Cheers
blkair446 said:
Thanks for the input. I have done that and am still unable to action ADB - It is a little confusing since the phone only shows the blue light and nothing else.
If I normally boot the phone it will register as an ADB device. I also find it strange that it will not boot into recovery. The android icon flashes but when you release it boots to safe mode. I assume it is a driver issue but it is not revealing its self to me . Cheers
Click to expand...
Click to collapse
The blue light is fastboot mode. There is no ui interface in fastboot for sony devices. Just a blue light and black screen.
R800x_user said:
On Sony devices you need to power off and hold volume up and plug in the USB cable. That should leave the blue LED to indicate fastboot mode. I'm not 100% sure since it's been a while since I've messed around with Sony devices
Click to expand...
Click to collapse
Same person but had to change user name -- more on the issue
I managed to unlock the boot loader and it seems that at every step for rooting I am running into curve balls. Windows was not working for me so I managed to unlock the bootloader with Linux and going on to the next step I had to go back to windows to find a current factory ROM.
The next issue: going back to the "how to" I am unable to located boot.xxxxx.sin in the factory ROM and the closest I could find is boot_x-Flash-ALL-2389.sin and that doesn't work.
In the boot directory all files are bootloader_X_44 and a combination of zip and sin files
Can anyone steer me through the muddy waters
The factory rom was downloaded through XperiaFirm application
blkair446 said:
Same person but had to change user name -- more on the issue
I managed to unlock the boot loader and it seems that at every step for rooting I am running into curve balls. Windows was not working for me so I managed to unlock the bootloader with Linux and going on to the next step I had to go back to windows to find a current factory ROM.
The next issue: going back to the "how to" I am unable to located boot.xxxxx.sin in the factory ROM and the closest I could find is boot_x-Flash-ALL-2389.sin and that doesn't work.
In the boot directory all files are bootloader_X_44 and a combination of zip and sin files
Can anyone steer me through the muddy waters
The factory rom was downloaded through XperiaFirm application
Click to expand...
Click to collapse
May I know how did you unlock the bootloader? Did you use xperia 1 as your device in https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader/#unlock-code?
I have already installed usb drivers and have the platform tools. But everytime I boot my device to fastboot, whether using "adb reboot bootloader" or power button + volume up, screen only shows black (led is solid blue). I did left it for a couple of minutes, nothing happened.
jepher said:
May I know how did you unlock the bootloader? Did you use xperia 1 as your device in ?
I have already installed usb drivers and have the platform tools. But everytime I boot my device to fastboot, whether using "adb reboot bootloader" or power button + volume up, screen only shows black (led is solid blue). I did left it for a couple of minutes, nothing happened.
Click to expand...
Click to collapse
I unlocked my bootloader after obtaining the unlock code from sony developers I used adb/fastboot commands in linux mint. Pretty straight forward but the next step for rooting is giving me issues. Just select xperia 1 and the imei number will identify your phone -- cheers
blkair446 said:
I unlocked my bootloader after obtaining the unlock code from sony developers I used adb/fastboot commands in linux mint. Pretty straight forward but the next step for rooting is giving me issues. Just select xperia 1 and the imei number will identify your phone -- cheers
Click to expand...
Click to collapse
Yes I followed those. But may I know how long it took you to finish the unlocking?
Install ADB/SDK drivers
Download platform tools
Plug the device
Make sure adb can see my device
Use adb reboot bootloader command
Device booted to fastboot mode
Execute the command with the unlock code
...stucked here
If I miss something. Please do let me know
jepher said:
Yes I followed those. But may I know how long it took you to finish the unlocking?
Install ADB/SDK drivers
Download platform tools
Plug the device
Make sure adb can see my device
Use adb reboot bootloader command
Device booted to fastboot mode
Execute the command with the unlock code
...stucked here
If I miss something. Please do let me know
Click to expand...
Click to collapse
I assume you are using windows and I must say I gave up trying to get win10 to work and I was stuck at the same place you are. I then switched to linux and it went a lot smoother and I didn't need all those tools as laid out in the description.
In linux you must use the phone to go into fastboot mode if you boot from computer it actually boots to a visible screen on the phone and I didn't have connection that would take the command line commands. Linux is very good because if you are missing something it will give you a link or a command line input when you execute the ADB or Fastboot command.
I have run a windows/linux dual boot desktop for a while now and I'm no expert but coming from the era of command line I can muddle through. Sorry if I can't give you more info on windows but win10 is such a pain and I find that with a lot of things linux works better. If I didn't need adobe acrobat I would not even bother with windows.
cheers
blkair446 said:
I assume you are using windows and I must say I gave up trying to get win10 to work and I was stuck at the same place you are. I then switched to linux and it went a lot smoother and I didn't need all those tools as laid out in the description.
In linux you must use the phone to go into fastboot mode if you boot from computer it actually boots to a visible screen on the phone and I didn't have connection that would take the command line commands. Linux is very good because if you are missing something it will give you a link or a command line input when you execute the ADB or Fastboot command.
I have run a windows/linux dual boot desktop for a while now and I'm no expert but coming from the era of command line I can muddle through. Sorry if I can't give you more info on windows but win10 is such a pain and I find that with a lot of things linux works better. If I didn't need adobe acrobat I would not even bother with windows.
cheers
Click to expand...
Click to collapse
Yes I am using w10. Will try linux later. I have searched everywhere and stucked at the same step. Thank you.
I have managed to unlock the bootloader and root the phone. But problem is. I can't write on the root folder.
More to this I think I might have located the boot file boot_X-flash-all-2396.sin but using magisk it returns no boot image found. I see the guide says use the canary built but that seems to have been shut down, so at an impasse here and am still reaching out for help - damn op phone were never this funky
I might as well put this one out there then -- Is there anyway to flash a op 8 pro in2025 to dual sim - it's the cause of this painful trip
I was reverting my phone to unroot and locked bootloader. And it is saying that "Your Device is corrupt. It can't be trusted and will not boot" loop.
I tried flashing it using the new flasher. But after flashing, it will do SONY boot loop. If I connect it to a charger it goes back to "Your Device is corrupt. It can't be trusted and will not boot" loop.
I can't use Sony Companion since it is saying that my battery is low, and I can't charge the phone since it will just continue looping.
Do you know/have any recovery.img?
Edt: Fixed my phone. Relocked the bootloader
jepher said:
I was reverting my phone to unroot and locked bootloader. And it is saying that "Your Device is corrupt. It can't be trusted and will not boot" loop.
I tried flashing it using the new flasher. But after flashing, it will do SONY boot loop. If I connect it to a charger it goes back to "Your Device is corrupt. It can't be trusted and will not boot" loop.
I can't use Sony Companion since it is saying that my battery is low, and I can't charge the phone since it will just continue looping.
Do you know/have any recovery.img?
Edt: Fixed my phone. Relocked the bootloader
Click to expand...
Click to collapse
Any chance you could post the steps to relock successfully? I presume using the fastboot commands etc though did you then just re run the command to relock the bootloader? Many thanks
cd993 said:
Any chance you could post the steps to relock successfully? I presume using the fastboot commands etc though did you then just re run the command to relock the bootloader? Many thanks
Click to expand...
Click to collapse
Yes. Relock it using fastboot command.
I use ubuntu to do it. If you can run fastboot commands in windows10 lucky you.
Hello, I have a Razer Phone 2, yesterday I uploaded a ROM on it, everything seems to have installed after whether the phone displayed a notification "Your device is corrupt. It can’t be trusted and may not work properly." then the notification disappeared and the phone will appear on the Razer powered android logo . after pressing vol - and the phone switch, the bootloader starts but I can not do anything in it, neither recovery mode nor wipe userdata, after clicking them, it returns to the razer logo and stands I looked and tried everything but I can't do anything about it, is this the end of the phone or is there any chance to get it back?
Thank you for your help and sorry for the spelling (translator)
lukkiii96 said:
Hello, I have a Razer Phone 2, yesterday I uploaded a ROM on it, everything seems to have installed after whether the phone displayed a notification "Your device is corrupt. It can’t be trusted and may not work properly." then the notification disappeared and the phone will appear on the Razer powered android logo . after pressing vol - and the phone switch, the bootloader starts but I can not do anything in it, neither recovery mode nor wipe userdata, after clicking them, it returns to the razer logo and stands I looked and tried everything but I can't do anything about it, is this the end of the phone or is there any chance to get it back?
Thank you for your help and sorry for the spelling (translator)
Click to expand...
Click to collapse
Flash stock following instructions on Razer Developer portal
jonchance_84 said:
Flash stock following instructions on Razer Developer portal
Click to expand...
Click to collapse
He follows the instruction and when entering the commands, <waiting for device> is shown . I have installed all the drivers
lukkiii96 said:
He follows the instruction and when entering the commands, <waiting for device> is shown . I have installed all the drivers
Click to expand...
Click to collapse
Installing drivers while phone is in fastboot mode too. Do checks while booted with adb devices and then boot into fastboot then run fastboot devices. If you get a device on each one, script should work. The pc sees a different device for each mode.
jonchance_84 said:
Installing drivers while phone is in fastboot mode too. Do checks while booted with adb devices and then boot into fastboot then run fastboot devices. If you get a device on each one, script should work. The pc sees a different device for each mode.
Click to expand...
Click to collapse
I think it's a hard brick, no command works, I guess I'll give up, is there any Razer service in Europe that could repair it for a fee?
lukkiii96 said:
I think it's a hard brick, no command works, I guess I'll give up, is there any Razer service in Europe that could repair it for a fee?
Click to expand...
Click to collapse
Could be a Win10 2004 build issue. Some have had luck either using an older win7 machine or loading up a linux vm in win10. U can let it take control of usb ports. It all stems from usb drivers in windows.
Don't know about service in europe. Im in Texas.
jonchance_84 said:
Could be a Win10 2004 build issue. Some have had luck either using an older win7 machine or loading up a linux vm in win10. U can let it take control of usb ports. It all stems from usb drivers in windows.
Don't know about service in europe. Im in Texas.
Click to expand...
Click to collapse
I followed your advice and used a computer with windows 7 everything flashed everywhere ok, only now when the phone turns on the message pops up "your device i corrupt. It can't be trusted and may not work properly" if something went wrong ?:crying:
Edit:It was enough to use the command fastboot flashing unlock_critical and everything works as it should, thanks a lot for your help, best regards