How To Solve Find Device Storage Corrupted & Couldn't Add Fingerprint -Redmi Note 4X
Hello Everyone,
** I am writing my problem in details if that help you to diagnose my problem, and sorry if my English is not good enough..
I Purchased Redmi Note 4X around two weeks ago. Unfortunately, my device got stolen one week ago, and with the help of MI Cloud, I was able to get it back.
After getting back my phone, I found my device was flashed or reset and locked with MI cloud locker.
Then I flashed my device again with MI PC Suit and Disabled my device on MI cloud.
Since then, I found everything is working fine except following two problems.
Problem One: I am unable to add my fingerprint. Whenever I try to add one I receive following message: "couldn't add Fingerprint, try again." It should be noted here that when I try to add it, I feel 11 vibrations on my phone and see a progress of fingerprint add-on device. The message appears at 12 steps.
Problem Two: I am also getting Following Error message "find device storage corrupted your device is unsafe now error" whenever I try to locate my device through MI cloud > Find Device > Locate Device.
To Solve these problems, I tried following methods But Didn't Work for Me.
1. I made a Factory reset. (Hard & Soft)- Didn't work.
2. I updated Latest Stable Global Rom (System Update Method) - Didn't work.
3. I installed Latest Developer Global Rom ( First Boot Method) - Didn't work.
4. Cleared Wipe Cache Data, Wipe Reset in Xiaomi MIUI 8 through Mi recovery settings. - Didn't work.
** I am from Bangladesh. This device is officially not available here, So no hope for official warranty or support. You guys are my last hope. So please help me.
Any kind of help to resolve the problems will be highly appreciated.
Thanks and Regards
Bhai same problem help me too.. Plz
Install TWRP from this link, when it asking password, press CANCEL.
Then wipe DATA, that's your factory reset
I have same problem .... Would u get any solution ?? If yes then tell me ...plz
Bro Just Unlocked bootloader .
And Flash Twrp .
And Use any custom rom
Your fingerprint will work fine .
All sensor to......
as long as the bootloader is unlocked, those features are disabled and/or you get those error messages. Reason is that the fingerprint has to be saved somewhere. Unlocking the bootloader gives people access to that storage (after all, you can get root access). The device is "unsafe" because of the unlocked state. Go to settings -> additional settings and look if the developer settings are available. There you can check if your device is unlocked.
I have installed miui 9 custom room I my lava pixel V2 and after few days my phone start rebooting it self when download a gamer or other help need
I have the same problem not able to use wifi on my redmi 4x even i have tried fastboot rom flash but not working on custom rom its working fine i dont know why.
Hi I have a Huawei p20 pro Chinese version and can't use Google app store anymore due to USA ban, I suppose I need to flash my room in order to be able to access the Google app store again?
I found some tutorial on YouTube but want to ask here as well before doing it if someone now what I must to and if there a tutorial available?
Thank you
M:good:
You cant change your vendor without bootloader code. Once variant - via test-point . But you need know how do it) or you phone will be without imei......
Meh.
Send me an used P20 or P20 Pro with or without damages, one of the only thing I need is a working phone, the screen can be dead.
Note: The USB port need to be functional. I'll show you one of my PoC.
Nothing to do with your revision and everythings. (not even your s/room/rom/g)
Best regards.
You can install google apps apks i have clt al01 chinese version 1nd everything works well from android 8 to 10 without any issue.
Hi, Sorry forum but I read all discussion without resolve my problem. My problem is strange, difficulty to resolve, so I have a mi9t with black screne/touch broken and I recovery my data on phone, this is a situation:
mi9t not have ADB enabled
mi9t not have hdmi output on another screen but have DisplayLink protocol and this is impossible because I can't install displaylink presenter app
I have unlocked the screen PIN with keyboard but when I put the cable usb in my pc, the mi9t result empy without file/SD/internal sd (or have I not unlocked the phone?)
How can resolve my problem?
Someone a mi9t and kindly could you tell me the sequence of the keyboard keys to press in order to enable the adb? because I don't want to change the display or is there a map of the MIUI keyboard keys?
This is a redmi 9t forum though, not mi 9t.
Well, If you see an unlocked padlock icon at boot then your device bootloader is unlocked if not then it's unsuccessful.
Unlocking bootloader of your phone will erase all data so it's normal to have empty internal storage.
I don't see any icon of a lock and the bootloader has never been unlocked, however I opened the discussion in the mi9t forum, sorry you can close
THREAD LOCKED
Requested by OP.
Regards,
shadowstep
Forum Moderator
Hey Everyone!
i recently got a huawei P40 Pro, and was really dissapointed to find out we people in the UK didnt get GMS on newer huawei devices and tried all the methods to downgrade my P40 pro to emui 10 but i recently found a way to succesufully downgrade back to emui 10!
NOTES:
You can only downgrade back to 10.1.0.121 but that would be sufficient enough to install GMS
When downgrading back to 10.1.0.121 you will lose USB connectivity but you can either use the USB OTG method or the huawei browser for this tutorial
after downgrade and installation of GMS, google wallet would never work as it relies on safetynet and the device being play protect certified so you wont be able to pay in shops, but huawei wallet and curve will still work
Lets Begin!
I AM NOT RESPONSIBLE FOR BRICKED DEVICES OR LACK OF HUMAN DECEINTY BECAUSE YOU DIDNT READ IT PROPERLY
Requirements:
A USB-C OTG adaptor (i find the quick switch usb otg adaptor you get in google pixel boxes works really well, if you cant get one any sort of usb otg dongle would work from ebay or borrow one from a friend because you gonna need it as a requirement)
A Windows Computer
A huawei p40 pro (obviously)
STEPS:
1. if your running EMUI 12.0.0.xxx you will need to downgrade back to emui 11.0.0.260, you can just use the normal hisuite downgrade method by going into once you connected your phone
Update > Switch to other version > roll back
2. once you downgraded back to emui 11.0.260 you can use the dload method here to downgrade to the 230 release, that will allow you to downgrade further back to emui 10 because it skips the antirollback mechanism implemented into newer EMUI releases
3. once you downgraded back to the 230 release we can downgrade further
download these three files and keep them somewhere safe and accessible for later
Hisuite 10 here (DO NOT OPEN THIS FILE YET YOU WILL NEED IT FOR LATER)
Hisuite 11 here (INSTALL THIS VERSION FIRST)
HIsuite Proxy here (Use this version as i had better luck with this version)
Now follow these steps carefully to get hisuite running properly
once hisuite 11 is installed dont open it just yet, it will ask for an update, DONT update at all, all you need this version for is the app on the phone
once you connect your phone to hisuite to install the apk and it installs successfully, uninstall hisuite 11, by running the hisuite 10 installation (do not uninstall via programs and features, use hisuite 10 installation package to uninstall hisuite 11)
Once hisuite 10 is installed, dont open it yet and launch hisuite proxy, keep it open or minimised into the taskbar and go to this website to get the required files necessary as shown below, also acitivate an ad blocker as well as youll have to put up with a few annoying spammy ads
ELS-LGRP4-OVS 10.1.0.121ELS-N29-PRELOAD 10.1.0.1(C432R4)ELS-N29-CUST 10.1.0.8(C432)
Once these files are put into hisuite proxy select "Rollback OS" But dont select "Force Auth Bridge" as that tends to crash hisuite
Click SETUP to kick in hisuite proxy
once the logs appear all green and some yellow (Dont worry thats perfectly normal) Open hisuite by the windows menu or desktop
4. Connect your phone to hisuite and input the code shown on the phone
5. then once hisuite detects your device, go to update > switch to other version (if for any reason it says "no internet connection" please reboot your computer) and should show 10.1.0.121 as an update you can downgrade to, go ahead and downgrade to that version
6. once you downgraded to the version, download these bunch of APKs here but we only really need the GMS file in the zip file, the rest we dont need
7. get googlefier here and install on the device, once installed follow the instructions in googlefier to get past the first step
IMPORTANT: Now, when you install and get past the date setting screen you will notice you cant proceed any further, how to fix that is to install a modified version of microG for huawei devices in the ZIP file i told you to get earlier that has a bunch of APKs once that installs you should be able to get past the first step
8. once you install all google play stuff youll get constantly bombarded by notifications saying "Play services require an action" Heres how you can fix it
1. go to settings > apps > show system processors > google account manager and force stop the app and clear data
2. do the same with the google play store
3. do the same once again with google services framework
reboot device
go to where you saved the zip file earlier and install GMS.apk
go back into settings > apps > show system processors and then force stop google account manager and clear data
go back to google play, force stop and clear data
go back to google services framework, force stop and clear data
reboot device
google play should be fully working without that annoying "play services requires an action" notification but you will see "this device is not play protect certified" heres how you can fix it by the video down below
now your device should be downgraded and has all the google play services installed and fully working!
even if you choose to update to emui 12 youll still keep all your GMS stuff, tested that on my P40 pro running 12.0.0.270 and with the patch01 update
I HOPE THIS HELPS YOU!
Did you make the procedure or just copy it from..here, from...there?
I am asking because I can recognize my work, and you didnt mention that. And this is against the rule of the forum.
badmania98 said:
Did you make the procedure or just copy it from..here, from...there?
I am asking because I can recognize my work, and you didnt mention that. And this is against the rule of the forum.
Click to expand...
Click to collapse
No I followed from my own experience, maybe because it'd worded differently in my end doesn't mean I copied it directly, don't jump to conclusions
Sure. 11 months later, but it is OK. Well done.
[badmania98] Huawei P40 (Lite, Pro, Plus) Guides, News, Discussion & Support
Hello! Because I answered to the same questions on different threads, I decided to create this thread, where I will provide my experience to you, in one place. The followings messages (2-7) contain all major info and tutorials links from this...
forum.xda-developers.com
Hello, I need help. I have a Huawei Mate Xs and I'm currently on EMUI 12.0.0.290. A month ago, I downgraded to EMUI 11 and then to EMUI 10. Now, after a month, when I try the same downgrade (absolutely the same version of the system, using the same method), the lowest I can go is EMUI 11.0.0.168. When I try to roll back to EMUI 10, any version, the device goes into bootloop and nothing helps (delete cache memory, factory reset). The only way is System Recovery via HiSuite Proxy on EMUI 11 and that's it. Has anyone else had a similar problem and is there a chance that Huawei will put some sort of ban on it with the 12.0.0.290 update
mattwhite7102 said:
Hey Everyone!
i recently got a huawei P40 Pro, and was really dissapointed to find out we people in the UK didnt get GMS on newer huawei devices and tried all the methods to downgrade my P40 pro to emui 10 but i recently found a way to succesufully downgrade back to emui 10!
NOTES:
You can only downgrade back to 10.1.0.121 but that would be sufficient enough to install GMS
When downgrading back to 10.1.0.121 you will lose USB connectivity but you can either use the USB OTG method or the huawei browser for this tutorial
after downgrade and installation of GMS, google wallet would never work as it relies on safetynet and the device being play protect certified so you wont be able to pay in shops, but huawei wallet and curve will still work
Lets Begin!
I AM NOT RESPONSIBLE FOR BRICKED DEVICES OR LACK OF HUMAN DECEINTY BECAUSE YOU DIDNT READ IT PROPERLY
Requirements:
A USB-C OTG adaptor (i find the quick switch usb otg adaptor you get in google pixel boxes works really well, if you cant get one any sort of usb otg dongle would work from ebay or borrow one from a friend because you gonna need it as a requirement)
A Windows Computer
A huawei p40 pro (obviously)
STEPS:
1. if your running EMUI 12.0.0.xxx you will need to downgrade back to emui 11.0.0.260, you can just use the normal hisuite downgrade method by going into once you connected your phone
Update > Switch to other version > roll back
2. once you downgraded back to emui 11.0.260 you can use the dload method here to downgrade to the 230 release, that will allow you to downgrade further back to emui 10 because it skips the antirollback mechanism implemented into newer EMUI releases
3. once you downgraded back to the 230 release we can downgrade further
download these three files and keep them somewhere safe and accessible for later
Hisuite 10 here (DO NOT OPEN THIS FILE YET YOU WILL NEED IT FOR LATER)
Hisuite 11 here (INSTALL THIS VERSION FIRST)
HIsuite Proxy here (Use this version as i had better luck with this version)
Now follow these steps carefully to get hisuite running properly
once hisuite 11 is installed dont open it just yet, it will ask for an update, DONT update at all, all you need this version for is the app on the phone
once you connect your phone to hisuite to install the apk and it installs successfully, uninstall hisuite 11, by running the hisuite 10 installation (do not uninstall via programs and features, use hisuite 10 installation package to uninstall hisuite 11)
Once hisuite 10 is installed, dont open it yet and launch hisuite proxy, keep it open or minimised into the taskbar and go to this website to get the required files necessary as shown below, also acitivate an ad blocker as well as youll have to put up with a few annoying spammy ads
ELS-LGRP4-OVS 10.1.0.121ELS-N29-PRELOAD 10.1.0.1(C432R4)ELS-N29-CUST 10.1.0.8(C432)
Once these files are put into hisuite proxy select "Rollback OS" But dont select "Force Auth Bridge" as that tends to crash hisuite
Click SETUP to kick in hisuite proxy
once the logs appear all green and some yellow (Dont worry thats perfectly normal) Open hisuite by the windows menu or desktop
4. Connect your phone to hisuite and input the code shown on the phone
5. then once hisuite detects your device, go to update > switch to other version (if for any reason it says "no internet connection" please reboot your computer) and should show 10.1.0.121 as an update you can downgrade to, go ahead and downgrade to that version
6. once you downgraded to the version, download these bunch of APKs here but we only really need the GMS file in the zip file, the rest we dont need
7. get googlefier here and install on the device, once installed follow the instructions in googlefier to get past the first step
IMPORTANT: Now, when you install and get past the date setting screen you will notice you cant proceed any further, how to fix that is to install a modified version of microG for huawei devices in the ZIP file i told you to get earlier that has a bunch of APKs once that installs you should be able to get past the first step
8. once you install all google play stuff youll get constantly bombarded by notifications saying "Play services require an action" Heres how you can fix it
1. go to settings > apps > show system processors > google account manager and force stop the app and clear data
2. do the same with the google play store
3. do the same once again with google services framework
reboot device
go to where you saved the zip file earlier and install GMS.apk
go back into settings > apps > show system processors and then force stop google account manager and clear data
go back to google play, force stop and clear data
go back to google services framework, force stop and clear data
reboot device
google play should be fully working without that annoying "play services requires an action" notification but you will see "this device is not play protect certified" heres how you can fix it by the video down below
now your device should be downgraded and has all the google play services installed and fully working!
even if you choose to update to emui 12 youll still keep all your GMS stuff, tested that on my P40 pro running 12.0.0.270 and with the patch01 update
I HOPE THIS HELPS YOU!
Click to expand...
Click to collapse
Thank you for this. I was struggling but this solution worked for me in 2023.
Im strugling with downgrade now, but in my opinion region must be the same i think.Not R6 when eou have R5, and after it downgraded to R4 on 10.1.0.121.
hi everyone,
there is a reason why https://professorjtj.github.io/ doesnt work? it redirect me to yahoo website.
Rampa93 said:
hi everyone,
there is a reason why https://professorjtj.github.io/ doesnt work? it redirect me to yahoo website.
Click to expand...
Click to collapse
It is working. I have just used your link. Try other browser.
My P40 Pro runs exactly that build, 11.0.0.260, (C432E3R6P4), but my preloaded version has R6 in it, so that means I need to install a preloaded version that matches my R number. Instead of installing C432R4 I need to install the C432R6 in order to avoid bricking my phone, right? Im not sure
Right. But changing the R will not brick the phone.
Thank you very much for sharing this guide/tutorial + thanks to @badmania98 for his guide too: https://forum.xda-developers.com/t/...news-discussion-support.4346741/post-85860061
i was quite confused to which EMUI version (10.1.0.121 or 10.1.0.131 like a youtuber used) for which to downgrade to be able to install google service / GMS on my P40 Pro (ELS-NX9 C432)
Looks like it's working though for me
hi
thanks guys (Daniel and Sherwinter) for the unvaluable tutorials.
i've managed to make it work on a p40 with emui12.
Any chance to get rid of the "phone does not meet the security requirements" when i am trying to use google pay?
I've tried various things but no success...unfortunately there i have all my cards(and are quite a lot) and dont want to return to 8 banking apps
No. You can try Curve app ( from App Gallery) if it is available in your country.
understood.
multumesc
mattwhite7102 said:
Hey Everyone!
i recently got a huawei P40 Pro, and was really dissapointed to find out we people in the UK didnt get GMS on newer huawei devices and tried all the methods to downgrade my P40 pro to emui 10 but i recently found a way to succesufully downgrade back to emui 10!
NOTES:
You can only downgrade back to 10.1.0.121 but that would be sufficient enough to install GMS
When downgrading back to 10.1.0.121 you will lose USB connectivity but you can either use the USB OTG method or the huawei browser for this tutorial
after downgrade and installation of GMS, google wallet would never work as it relies on safetynet and the device being play protect certified so you wont be able to pay in shops, but huawei wallet and curve will still work
Lets Begin!
I AM NOT RESPONSIBLE FOR BRICKED DEVICES OR LACK OF HUMAN DECEINTY BECAUSE YOU DIDNT READ IT PROPERLY
Requirements:
A USB-C OTG adaptor (i find the quick switch usb otg adaptor you get in google pixel boxes works really well, if you cant get one any sort of usb otg dongle would work from ebay or borrow one from a friend because you gonna need it as a requirement)
A Windows Computer
A huawei p40 pro (obviously)
STEPS:
1. if your running EMUI 12.0.0.xxx you will need to downgrade back to emui 11.0.0.260, you can just use the normal hisuite downgrade method by going into once you connected your phone
Update > Switch to other version > roll back
2. once you downgraded back to emui 11.0.260 you can use the dload method here to downgrade to the 230 release, that will allow you to downgrade further back to emui 10 because it skips the antirollback mechanism implemented into newer EMUI releases
3. once you downgraded back to the 230 release we can downgrade further
download these three files and keep them somewhere safe and accessible for later
Hisuite 10 here (DO NOT OPEN THIS FILE YET YOU WILL NEED IT FOR LATER)
Hisuite 11 here (INSTALL THIS VERSION FIRST)
HIsuite Proxy here (Use this version as i had better luck with this version)
Now follow these steps carefully to get hisuite running properly
once hisuite 11 is installed dont open it just yet, it will ask for an update, DONT update at all, all you need this version for is the app on the phone
once you connect your phone to hisuite to install the apk and it installs successfully, uninstall hisuite 11, by running the hisuite 10 installation (do not uninstall via programs and features, use hisuite 10 installation package to uninstall hisuite 11)
Once hisuite 10 is installed, dont open it yet and launch hisuite proxy, keep it open or minimised into the taskbar and go to this website to get the required files necessary as shown below, also acitivate an ad blocker as well as youll have to put up with a few annoying spammy ads
ELS-LGRP4-OVS 10.1.0.121ELS-N29-PRELOAD 10.1.0.1(C432R4)ELS-N29-CUST 10.1.0.8(C432)
Once these files are put into hisuite proxy select "Rollback OS" But dont select "Force Auth Bridge" as that tends to crash hisuite
Click SETUP to kick in hisuite proxy
once the logs appear all green and some yellow (Dont worry thats perfectly normal) Open hisuite by the windows menu or desktop
4. Connect your phone to hisuite and input the code shown on the phone
5. then once hisuite detects your device, go to update > switch to other version (if for any reason it says "no internet connection" please reboot your computer) and should show 10.1.0.121 as an update you can downgrade to, go ahead and downgrade to that version
6. once you downgraded to the version, download these bunch of APKs here but we only really need the GMS file in the zip file, the rest we dont need
7. get googlefier here and install on the device, once installed follow the instructions in googlefier to get past the first step
IMPORTANT: Now, when you install and get past the date setting screen you will notice you cant proceed any further, how to fix that is to install a modified version of microG for huawei devices in the ZIP file i told you to get earlier that has a bunch of APKs once that installs you should be able to get past the first step
8. once you install all google play stuff youll get constantly bombarded by notifications saying "Play services require an action" Heres how you can fix it
1. go to settings > apps > show system processors > google account manager and force stop the app and clear data
2. do the same with the google play store
3. do the same once again with google services framework
reboot device
go to where you saved the zip file earlier and install GMS.apk
go back into settings > apps > show system processors and then force stop google account manager and clear data
go back to google play, force stop and clear data
go back to google services framework, force stop and clear data
reboot device
google play should be fully working without that annoying "play services requires an action" notification but you will see "this device is not play protect certified" heres how you can fix it by the video down below
now your device should be downgraded and has all the google play services installed and fully working!
even if you choose to update to emui 12 youll still keep all your GMS stuff, tested that on my P40 pro running 12.0.0.270 and with the patch01 update
I HOPE THIS HELPS YOU!
Click to expand...
Click to collapse
Brother, few days ago I tried this method and it's work for my p40 pro C636R5 version.
but today I'm trying to do this but it don't work. what should I do Now?