Redmi 4X Only Charging Can't Connect PC when i plug in pc always charging
can't use MTP, plz help so i can root my device
Restart your device, turn on/off USB debugging. also try using different USB cable in different USB port on PC.
I already did that
replace the cable replace the pc replace the usb board
but it's all the same
another trick sir?
'X - StREezZ' said:
I already did that
replace the cable replace the pc replace the usb board
but it's all the same
another trick sir?
Click to expand...
Click to collapse
I am not sure but it might be a bug or something.(i cant check on my phone since i dont use MIUI).
check if in your PC Redmi 4X device drivers installed? also check when you connect device to PC go to in your PC device manager and locate if Redmi 4X is showing up or not if shows check for update drivers or disable and enable the device.
similarly you can check this by going in control panel > hardware and sound > devices and printers > Redmi 4X.
hope this helps.
Related
Bought a LG P970 Optimus Black.
Installed LGMobile Support Tool into my
Windows 7 64bit.
Installed the LG 3.2.1 drivers using LGMobile Support Tool.
Then, I connected the phone to the computer.
Result of drivers installation:
LGE Android Platform Composite USB Device - Ready to use
LGE Android Platform USB Modem - Failed
LGE Mass Storage Device - Failed
LGE Android Platform USB GPS NMEA Port (COM6) - Ready to use
LGE Android Platform USB Serial Port (COM7) - Ready to use
I wasn't planning to use the phone as a modem, so that driver does not worry me, but the USB storage problem is annoying.
In the phone, it does look as it connected. It offers the option to activate USB storage on screen, and if I click on the button, it says it enabled it, but nothing happens in the computer side.
I tested to uninstall everything LGE from the computer and restart from scratch, but same problem.
Ideas?
Update:
The LGMobile Support Tool in Windows says the phone IS connected, and that the software in the phone is up to date.
Do You see the phone into section computer like Removable Disc?
Matematiks said:
Do You see the phone into section computer like Removable Disc?
Click to expand...
Click to collapse
No. Nothing at all.
In "Devices and Printers" I have:
Under Devices:
LG Android Phone
LG Android (Modem)
LG Android (Serial)
LG Android (NMEA)
Under Unspecified:
LGE Bluetooth TransPort (COM4)
LGE Virtual Modem
In the "Device Manager" I have 1 "USB Mass Storage Device", with a yellow warning sign.
Under its Properties, in Device Status, it says: "This device cannot start. (Code 10)
If I try to "Update Driver" Windows says that the right driver is already installed.
FIXED !!
Updated LG driver to 3.5.
Still didn't work.
Then, I turned off the phone.
Removed the battery.
Put the battery back.
Turned on the phone.
Connected it to USB.
This time the USB driver started ok, and when I activated the USB storage I was able to see the drive under "Computer" in Windows Explorer.
I had turned the phone off and on before, so I think removing the battery did something that simply turning off and on wouldn't do.
dcardozo said:
Updated LG driver to 3.5.
Still didn't work.
Then, I turned off the phone.
Removed the battery.
Put the battery back.
Turned on the phone.
Connected it to USB.
This time the USB driver started ok, and when I activated the USB storage I was able to see the drive under "Computer" in Windows Explorer.
I had turned the phone off and on before, so I think removing the battery did something that simply turning off and on wouldn't do.
Click to expand...
Click to collapse
I had the same problem and could not find anything. Then I also found that turning phone off and pulling battery worked for me also!
mastamindz said:
I had the same problem and could not find anything. Then I also found that turning phone off and pulling battery worked for me also!
Click to expand...
Click to collapse
thanks for the trick, i hope this can be applied on my galaxy wonder,,
USB 3.0 External Storage Device driver not getting Installed- [Solved]
Issue: USB storage device is not working on my computer, be it a USB 2.0 or USB 3.0 it just doesn't install the driver for storage device and my USB mouse and webcam does work.Everytime I plug in a USB flash drive of USB 3.0 External hard drive it beeps and gives error message that the device driver could not be installed.
Here is the steps I took to troubleshoot this issue and it got fixed.
1.Open registry by going to Run-> Type Regedit.
and Navigate to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{36FC9E60-C465-11CF-8056-444553540000}
Highlight this key ({36FC9E60-C465-11CF-8056-444553540000} ), on the right pane, and then check if “Upperfilters” and “Lowerfilters” value are present. If so, please right click on the values and select "Delete" to remove them.
2. Now go to "C:\windows\inf" folder and check if these three files USBSTOR.SYS, usbstor.inf and usbstor.pnf are available.If it was renamed change the name as I wrote them or if they are not available copy them from "C:\windows\System32\DriverStore\FileRepository\usbstor.inf_x86_neutral_83027f5d5b2468d3"
And then go to "C:\WINDOWS\SYSTEM32\Drivers" and make sure you have USBSTOR.SYS and usbd.sys available if not copy them again from
"C:\windows\System32\DriverStore\FileRepository\usbstor.inf_x86_neutral_83027f5d5b2468d3"
and paste it to Drivers folder.
3. Open Registry editor by going to Run-> typing Regedit and Navigate to the following key:
"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR" and ensure that the Start value is 3. and restart the system.
It will work..
thx
mastamindz said:
I had the same problem and could not find anything. Then I also found that turning phone off and pulling battery worked for me also!
Click to expand...
Click to collapse
For me also worked ! I don't know why or how..but thx a lot! I was goin crazy because about few days ago it worked and suddenly it didn't but it all sorted out! Thanks!
That's me again
Ok, when I finally decided to upgrade my Tab thank to your help I discovered that the connection via the USB is not working at all !
I have Kies and obviously the drivers are installed.
When I connect the Tab to the PC i get the 3 options for choice:
1- Samsung Kies
2- Media player
3- Mass storage
When I choose the Kies option the Kies can't recognize and connect the Tab even after the troubleshooting process.
When I choose the mass storage and after the mount also nothing happen and there is no new drives in My Computer.
I tried to connect the Tab to PC with no drivers for Samsung at all and
strangely, the same effect.
There was no notification about new hardware connected to the PC and the question about installing drivers for that new discovered hardware ?!
I suspect that is some thing wrong with the cable although I can charge the Tab and some kind of recognition is established between the PC and the Tab.
Do you use any usb hubs or extentions? If yes.. don't use it. You have to connect your tab directly to the usb port on your pc with the original cable..
If you want go to connect as usb storage, you have to change the usb connectivity on your tab:
system settings > wireless and networks > USB > Connect to PC
If you want ODIN to recognize ur tab, you need to turn on the USB debugging mode:
System settings > applications > development > Check USB Debugging.
For kies, well.. it's always a little unreliable.
The USB cable is connected to the USB port on the mother board
The debugging option is checked
When I run Odin, the ID:COM window is empty.
That's means NO CONNECTION
OK, I solved the problem with new original USB cable
hello guys can you help me coz i cant connect my lg optimus 2x to my pc
when i connect my o2x is charging but my pc cant recognize it
i tried reinstalling drivers, change usb cable, change my OS from win7 to xp, flash stock rom ( cant flash because my pc cant recognize my o2x so i cant start flashing), use nvflash (my pc cant detect apx device)
brymarti said:
hello guys can you help me coz i cant connect my lg optimus 2x to my pc
when i connect my o2x is charging but my pc cant recognize it
i tried reinstalling drivers, change usb cable, change my OS from win7 to xp, flash stock rom ( cant flash because my pc cant recognize my o2x so i cant start flashing), use nvflash (my pc cant detect apx device)
Click to expand...
Click to collapse
please dont use any USB hubs...connect it to the USB port on the motherboard side....normally on the rear side for the Desk tops.....on the laptop all ports are directly connected normally...
secondly, what is your config? ROM?Kernel?please state your current configuration which can allow others to understand the situation.
Thanks
yeah i dont use usb hub i connect it directly i tried it on my laptop but its not working
my o2x dont say that usb debugging is connected it only charge
im on stock GB now 2.3.4 v20g
Don't want to hijack this thread, just got the same problem. (Not a complete noob here, rooted lots of different devices)
Bought a used 2x today. Froyo 2.2.2 german stock on it.
It just doesn't show the prompt that USB is connected
Tried:
- LG Mobile Driver from version 2.x.x up to 3.7.2
- on Win7 32 bit, Win7 64bit, Win XP 32 bit on various USB ports
- LG PC Suite obviously doesn't connect too
- checked/unchecked USB debugging, USB mass storage and all the obvious settings
- tried different cables
Would be really great if someone experienced could point us in the right direction.
EDIT:
After lots and lots of google I found out about a menu when dialing: 1809#*990#
With these options available:
CP Image Download
FET Disable
FET Enable
AP UART
CP UART
AP USB
CP USB
CP UART gave me at least a life sign once by saying that Windows wasn't able to recognize the device.
Is this issue really unsolvable?
Sorry for the bump, but I got some update.
when dialing the above mentioned 1809#*990# in the Port menu, switching from default AP USB to AP/CP UART gave me life signs.
After switching to AP UART I linked the Unknown device driver to lgusbdiag.inf located in C:/ProgramFiles(x86)/LG United Mobile Driver.
Suddenly it started installing it and is now recognized as: LGE Platform Android USB Device.
Once disconnected I lose USB again, I'm able to recreate the first steps though even in default AP USB mode by now.
The only thing I need USB for is for flashing a custom recovery but the only thing I don't have is ADB somehow : / Clockwork telling me: device not found.
Any help on this one?
any idea guys about my problem?
Have you tried my method?
After manually installing drivers with CP UART on, switching back to default permanently enabled access with default AP USB settings as well.
i tried that but it only charge
theres a weird thing in my cp when i switch to cp uart my o2x says it charging even i dont connect it to my pc or charge it
Ap uart - p990 / p999
I have LG P999. rooted and cyanogen.
None of the special DTMF dialing # codes is not working (also code changed from 990 to 999) (i sow some other in another posts)
is anybody know a way to change to AP UART by software (with eclipse...)
or with a special cable?
i need to use AP UART - meaning to have a serial com in AP(app).
Thanks,
Tamir
guys,
Have you tried to install MyPhone Explorer and try the same....it can connect your device via wifi,USB or Bluetooth....so some way should work....
any Android version above Froyo(included) should work....I use this always...one of very useful and bug free apps.
Try it
i have android one Mito Compact, and my PC win 7 pro.
my PC cannot detect my android. and in android display don't show a notice anything just charging.
what must i do??
Thakz all
Easy : Bcoz of Debugging not turned on.
botaxxs said:
i have android one Mito Compact, and my PC win 7 pro.
my PC cannot detect my android. and in android display don't show a notice anything just charging.
what must i do??
Thakz all
Click to expand...
Click to collapse
1.Go to About Device
2.Tap on Build Number
3.Then Dev option will appear above about device
4. In it Check USB debugging/ Android debugging
5.Remove usb and connect again
6.Phone will be detected.
ThunderSky7 said:
1.Go to About Device
2.Tap on Build Number
3.Then Dev option will appear above about device
4. In it Check USB debugging/ Android debugging
5.Remove usb and connect again
6.Phone will be detected.
Click to expand...
Click to collapse
wow, thakz ya
it works:fingers-crossed:
ThunderSky7 said:
1.Go to About Device
2.Tap on Build Number
3.Then Dev option will appear above about device
4. In it Check USB debugging/ Android debugging
5.Remove usb and connect again
6.Phone will be detected.
Click to expand...
Click to collapse
I didn't even do such a thing, just connect the phone to USB and it works but after I installed the Micromax driver provided by the Micromax it didn't work the native driver works fine on Windows 7 x64bit.
Hi ! I don't know why but I want to connect my Pixel 4a 5G Yesterday on my mac and today on Pc the pixel is not recognized.
I have uncheck usb debuging and check it again but not working.
My Pixel are on last Android 12 and root with magisk. it is possible that a mode can create a problem with the OTG ?
I have test on Safe mod doesn't work too
I have connect an usb type c usb key it recognize.
I have test connect on plateform tools and on terminal ./adb devices, have message on pixel to allow my computer and it recognize but not Android File transfert ?
I think stay the new update and see if I can update it !?
I don't understand why ?
Thanks
Hi ! I post again because when I connect usb key mtp works and if I connect to my mac and go to settings usb parameters and choose transfert files/Android auto that work but never had notification pop-up for choose it
USB is a master/slave protocol. When you plug in an otg cable, your phone's USB controller switches into host mode. Your computer's USB is always in host mode. So your effectively trying to get two master devices to communicate which USB does not support.