I recently brick my k20 pro I was in twrp I formated my data I think some how I wiped the entire system.anyways I'm now hard brick with a black screen no recovery no fastboot option. When I connect the phone to then PC it shows up as (Qualcomm hs-usb qloader 9008). I didn't do the test point method, that's how it automatically reads. I tried the using mi flash tool but get errors ( will attach screen shots) any guidance will be greatly appreciated. I don't mind paying for some help.
Is your device unlocked?
Have you downloaded and installed the drivers that cam with the mi flash tool?
Can you access fasboot mode by holding power down ?
Try and make sure there are no spaces in the file name you created.
Ex:* miui11globalromfastboot firmware (= bad)
* Miui11globalromfastboot.firmware (= good)
https://forum.xda-developers.com/k20-pro/how-to/xiaomi-mi9t-k20-hard-brick-recover-t4037591
Could try this ^.
Alternatively XiaomiTool might do the trick.
https://www.xiaomitool.com/
Related
Hello everyone, I wanted to open a topic here because I'm about 6 hours that I'm trying, but without any success ...
practically, after flashing via MiFlash (the latest version available) the update of 8.1.0 with the patches of October, the smartphone has started correctly, and then, suddenly turn off and go into EDL mode.
I tried all the possible combinations with the keys, but the result is that it simply always goes to EDL (the computer, also in Device Manager, detects Qualcomm HS-USB QDLoader 9008) ...
When i try to flash any rom stock, MiFlash detects the smartphone, but by flashing it gives me "hello packet not received" or, after flashing the firehose and abl me files from "You can not authorized to Download !!!" or, start the flash and then disconnect the smartphone by giving "can not read from port COM *number*".
I also tried to replace the files inside "images" by taking the files from Patched Programmer, but the result is always the same.
I really do not know how to continue ...
By chance, does anyone have a solution?
Thanks in advance for any help from you.
oscar-goat said:
Hello everyone, I wanted to open a topic here because I'm about 6 hours that I'm trying, but without any success ...
practically, after flashing via MiFlash (the latest version available) the update of 8.1.0 with the patches of October, the smartphone has started correctly, and then, suddenly turn off and go into EDL mode.
I tried all the possible combinations with the keys, but the result is that it simply always goes to EDL (the computer, also in Device Manager, detects Qualcomm HS-USB QDLoader 9008) ...
When i try to flash any rom stock, MiFlash detects the smartphone, but by flashing it gives me "hello packet not received" or, after flashing the firehose and abl me files from "You can not authorized to Download !!!" or, start the flash and then disconnect the smartphone by giving "can not read from port COM *number*".
I also tried to replace the files inside "images" by taking the files from Patched Programmer, but the result is always the same.
I really do not know how to continue ...
By chance, does anyone have a solution?
Thanks in advance for any help from you.
Click to expand...
Click to collapse
1)your bootloader is unlocked or not when you flash stock rom with MiFlash?(fastboot oem unlock and fastboot flashing unlock critical and this will wipe all your data if you don't already use this command)
2)Hello packet not received is currently with USB 3.0 and USB 3.1 port, try USB 2.0 port and reboot your PC and the phone
3)If this not work try to use your warranty
Guys I was trying to do unlock my ROG Phone II with EDL mode:
https://forum.xda-developers.com/rog-phone-2/how-to/how-to-unlock-rog2-phone-via-edl-mode-t4008267
My phone is still in edl mode it shows as a COM port in my pc. I really need help I cannot do anything. I tried to flash it in MiFlash and it gives an error every time. Please help me!!!!!!!! PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I NEED HELP IMMIDIETELY PLEASE
The app works just fine... Also why are you trying to use a Xiaomi flash tool on an Asus device?
Get out of EDL mode with vol- vol+ power all three together.
EfeKamil said:
Guys I was trying to do unlock my ROG Phone II with EDL mode:
https://forum.xda-developers.com/rog-phone-2/how-to/how-to-unlock-rog2-phone-via-edl-mode-t4008267
My phone is still in edl mode it shows as a COM port in my pc. I really need help I cannot do anything. I tried to flash it in MiFlash and it gives an error every time. Please help me!!!!!!!! PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I NEED HELP IMMIDIETELY PLEASE
Click to expand...
Click to collapse
Have you tried doing the process with the correct drivers installed? (I have not done this method, but it could be driver related) See here for drivers
EDIT: at the bottom of your EDL thread it does state you need the Qualcom drivers installed, not sure if they're the same as the ones i linked to, but the ones in that thread are here
Also, this post may be of some use to you, might wanna read the rest of the thread too for tips...
'I read somewhere that you must start the EDL unlocking process as soon as you run the fastboot command to boot it into EDL mode. It wouldn't run correctly for me at first, but then I rebooted into fastboot, ran the enter dload command, then immediately ran the unlocker (or if it fails because your device hasn't entered EDL mode just yet, keep spamming it).
I have no idea why that's the case but it worked for me.'
Hey guys,
I need some assistance as I am not able to unbrick my RM3 with unbrick tool. Multiple times I have already got it worked, flashed many times, but this time I am not getting my phone started. Normally, I use the NON-EU unbrick tool, all goes well but this time, it says THIS DEVICE CAN'T BE TRUSTED, WON'T BOOT UP. After multiple tries, I tried that EU unbrick too as well, but the same result.
I think I have locked the bootloader while on CN Rom 5.14, most probably this is the only reason, I was doing some tweakings and got it bricked. Anyone here who can tell me if there is such thing named CN Unbrick tool or any other way around to get it worked. I can enter FASTBOOT and EDL Mode but recovery mode showing black screen and adb is not recognising as didn't enable USB debugging. please help...
[email protected] said:
Hey guys,
I need some assistance as I am not able to unbrick my RM3 with unbrick tool. Multiple times I have already got it worked, flashed many times, but this time I am not getting my phone started. Normally, I use the NON-EU unbrick tool, all goes well but this time, it says THIS DEVICE CAN'T BE TRUSTED, WON'T BOOT UP. After multiple tries, I tried that EU unbrick too as well, but the same result.
I think I have locked the bootloader while on CN Rom 5.14, most probably this is the only reason, I was doing some tweakings and got it bricked. Anyone here who can tell me if there is such thing named CN Unbrick tool or any other way around to get it worked. I can enter FASTBOOT and EDL Mode but recovery mode showing black screen and adb is not recognising as didn't enable USB debugging. please help...
Click to expand...
Click to collapse
I think any unbrick tool should work both EU and non EU
you must pc driver uninstall reboot pc driver install again reboot your pc and also check your port number eld mode
red magic 3 driver reinstall in may case port number change automaticly i m notice this point it will help you to start your device red magic 3
Hello. Sorry for my poor english.
I have xiaomi redmi 9t lime hardbriked.
No recovery, no fastboot, no boot...
The bootloader is unlocked.
The only hope left is flash stock rom în edl.
I put my phone in edl mode with test point.
Drivers ar corectly installed and Phone is properly recognized in device manager.
The big problem is I can't flash with MI flash because I don't have Authorized Account and Qfil/Qpst wont work.
The stock firmware is redmi 9t lime global fastboot version.I try everything with qfil with no succes.
I need a patched firehose file or a working solution to flash stock firmware în edl.
Thanks a lot.
Any fix please
If you want to have a functional phone, and you have limited skills, don't mess with your rom ffs...or use Miracle Xiaomi Tool Login Edition...pay someone to help you.
just install Miflash and Lastest fastboot Firmware then unpack it and copy this file (firehose) inside the image file ( Replace the old one) and start flash
AhmedSamir72 said:
just install Miflash and Lastest fastboot Firmware then unpack it and copy this file (firehose) inside the image file ( Replace the old one) and start flash
Click to expand...
Click to collapse
Thanks a lot! I have the nearly the same problem like @autototal . My phone stopped working and is only recognized as QDLoader 9008. The strange thing in my case is that I had a working Pixelblaster ROM for month on it and it just died without a reason. I never opened the back to bring it to EDL mode.
Anyway... I also got the "only nop" error in the Mi Flash Tool. I tried flashing it with your firehose_ddr.zip and IT WORKED. But then I tried to turn on the phone and it is still in the same state as before (only QDLoader 9008 and no fastboot or anything). Do you have any idea what I could do to bring it back to live?
Thanks a lot
furiousjay said:
Thanks a lot! I have the nearly the same problem like @autototal . My phone stopped working and is only recognized as QDLoader 9008. The strange thing in my case is that I had a working Pixelblaster ROM for month on it and it just died without a reason. I never opened the back to bring it to EDL mode.
Anyway... I also got the "only nop" error in the Mi Flash Tool. I tried flashing it with your firehose_ddr.zip and IT WORKED. But then I tried to turn on the phone and it is still in the same state as before (only QDLoader 9008 and no fastboot or anything). Do you have any idea what I could do to bring it back to live?
Thanks a lot
Click to expand...
Click to collapse
I had the exact same issue. A perfectly working phone for 3 months. Then I turn it off one day and it won't turn back on. I couldn't get MiTools to flash it no matter what I tried.
I found a set of videos that detail removing a capacitor from the main board.
This worked to get my phone booting again with no issues. It may be worth a try if all else fails and you need your data and/or aren't covered under warranty.
AhmedSamir72 said:
just install Miflash and Lastest fastboot Firmware then unpack it and copy this file (firehose) inside the image file ( Replace the old one) and start flash
Click to expand...
Click to collapse
Work like a charm!
Big Like
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Obi_Wlan said:
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank but phone simply dont booting to fastboot mode.
Durien Daragoth said:
Thank but phone simply dont booting to fastboot mode.
Click to expand...
Click to collapse
You have to experiment with some button combinations. I ran into the same problem with a different phone two years ago. Read everything about this even if fastboot isn't working right now.
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo] Reboot to EDL mode from FASTBOOT! No more Test Point Method needed ;) Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot...
forum.xda-developers.com
Service centre will be your best bet
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Player__y said:
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Click to expand...
Click to collapse
If you have any, let me know on discord, 𝑃𝑙𝑎𝑦𝑒𝑟#2028
Thx but phone dont booting to fastboot mode so i cant flash boot.img i tryed now SP Flash too in linux and still same errors becouse phone disconecting too fast. I think technician service will be solution..
Dont use The daanm Sp flash Tool , Its for mediatek devices, USE Miflash, and Its impossible a phone dont boot in fastboot mode, try again, pls hold The button
I have both Mi flash and SP flash tool
Without fastboot you cant do much...
in Miflash it dont do anything even device it dont see on COM3
in SP flash too it react but with errors becouse of disconecting
phone dont boot right becouse both A and B boot images are corrupted.
Does your screen at boot turn red? I've done everything on my cell phone, several things have happened to me and not once did fastboot have a problem, because fastboot is a totally different place to boot, there is only this possibility if you used commands in adb to remove or do something in fastboot that made it useless, it's impossible to happen this in the way you said
yes i did adb commands in fastboot becouse i instaled recovery and this all happend after reboot
no problem doing things in adb, I said in the sense that you deleted fastboot in adb but that didn't happen by the way you said
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Obi_Wlan said:
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Click to expand...
Click to collapse
I tryed but not succes. It just booting every 5s nowhere. Cant get to EDL mode sorry. And correct turn off phone isnt possible i have to unplug battery flex cable but i also tryed. Only possible state where it dont restarting is when battery is unpluged and i connect phone on cable with pc and pressing volume down+power. But connection to COM3 is only 2s.
Well, in that case you need to short the test points on your motherboard and plug the phone into your PC at the same time.
Watch several videos related to it on YouTube first.
Wait, is your phone Redmi Note 11 or 11s?
I will try the point test. I have Redmin Note 11s.
Ahhhh...you posted it on Note 11 forum.
Can't help you mate. Things are more complicated in mediatek devices.
Still, this thread might help a little. Good luck.
(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
Now i have bit progress with python im able to hold COM3 port connection around 60s. But when i start SP Flash Tool it will always make error. STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001) and STATUS_ERR (0xC0010001) , STATUS_BROM_CMD_FAIL
I finally managed to connect device for longer time cca 1 min with MTKMETAUtilityV49 and it helped me also disable auhorized connection for SP Flash tool V5. By this i formated whole disc except bootloader. Now phone dont self restarting so it is prepared for instal fresh rom. I think this will be again problem becouse i geting this error after few seconds of flashing: STATUS_SEC_IMG_TOO_LARGE