i wanna connect my samsung a3 2017 8.0 to pc via adb. because i wanna disable peeking notifications. "adb shell settings put global heads_up_notifications_enabled 0"
but when typing "adb devices" in cmd, there is no phone to be seen. ive tried with platform-tools_r28.0.0-windows and adb-setup-1.3.
i have enabled usb debugging in phone settings and its not rooted. ive never done these things before.
i can see my phone in pc to transfer pics and movies but adb is not working. help me please.
edit: its working now. i just installed SAMSUNG_USB_Driver_for_Mobile_Phones
Hello,
I got my phone brand new about 4 months ago. I rooted it and got TWRP installed with no issues. Fastboot and ADB were working fine but now when I try to connect my phone via USB and use ADB I get unauthorized whenever I type adb devices. Typically this happens because your phone is prompting you to allow the computer to have root access but I am not getting that popup window at all.
Things I've tried;
Uninstalled ADB/Updated ADB
Deleted adbkey folder under C:\Users\name\.android
Stopped and Started the adb server again after computer and phone reboot
Deleted ADB_keys folder on android in \data\misc\adb folder on phone itself, followed by a restart
Turning off then back on USB Debugging
Turning off then back on USB Debugging & Developer Options
(Including Revoking USB Debugging Authorizations both times)
Even tried copying the following from PC to phone ~/.android/adbkey.pub inside the /data/misc/adb/adb_keys
Still no luck, I'm not sure why it would just stop working out of nowhere. Nothing has changed since I used it a few months ago.
Also another strange occurrence is that if I turn off USB Debugging / Developer Options then reboot. Once the phone gets to the home screen both USB Debugging and Developer Options are enabled again without me doing it.
Anyone else have a similar issue and figure it out?
vulcanrvn said:
Hello,
I got my phone brand new about 4 months ago. I rooted it and got TWRP installed with no issues. Fastboot and ADB were working fine but now when I try to connect my phone via USB and use ADB I get unauthorized whenever I type adb devices. Typically this happens because your phone is prompting you to allow the computer to have root access but I am not getting that popup window at all.
Things I've tried;
Uninstalled ADB/Updated ADB
Deleted adbkey folder under C:\Users\name\.android
Stopped and Started the adb server again after computer and phone reboot
Deleted ADB_keys folder on android in \data\misc\adb folder on phone itself, followed by a restart
Turning off then back on USB Debugging
Turning off then back on USB Debugging & Developer Options
(Including Revoking USB Debugging Authorizations both times)
Even tried copying the following from PC to phone ~/.android/adbkey.pub inside the /data/misc/adb/adb_keys
Still no luck, I'm not sure why it would just stop working out of nowhere. Nothing has changed since I used it a few months ago.
Also another strange occurrence is that if I turn off USB Debugging / Developer Options then reboot. Once the phone gets to the home screen both USB Debugging and Developer Options are enabled again without me doing it.
Anyone else have a similar issue and figure it out?
Click to expand...
Click to collapse
Go Here and download the Fastboot drivers. follow the directions on the razor dev portal. I had the same issue and this fixed it for me. https://developer.razer.com/razer-p...94.1708481542.1586624574-305520188.1586475530
If your adb-server is not started with root/admin rights, your phone will never prompt you for authorization unless you choose a different USB Mode (MTP, PTP, etc.) than Charge Only. I suspect this is done to prevent certain malicious actions being performed without the user being aware.
If you start your adb-server with root/admin rights (by typing "sudo adb start-server", make sure you've killed your existing daemons before doing so), you can use ADB while in Charge Only mode, provided you've subsequently authorized the PC to do so. However, unlike normal adb server, the fingerprint may occasionally change and you may need to redo the authorization again.
Hi all
I just moved from my old phone HTC A9 to Samsung S10.
For my old phone, I used a "ADB method" learnt from this form to disable head up notification for all applications while MAINTAINING regular notifications in the status bar. It works well. Reference <https://forum.xda-developers.com/android/general/howto-4-to-disable-heads-notifications-t3197660>.
However, now with my Samsung S10, I tried the same way following the same steps (listed below). But it is NOT WORKING. This is very frustrating. I tried for many times with different laptops. Could anyone give me some advices here?
============================================================================================
a) Open a terminal and check if the device is connected using the following command:
Code:
adb devices
b) You should see your phone on the list that appears. Now use the following command:
Code:
adb shell settings put global heads_up_notifications_enabled 0
c) Reboot your phone.
d) Done!
Hi
I am trying to enable some apps that I previously disabled using Alliance Shield X, which stopped working today.
I am able to authorize my device on ADB but whenever I try to enable a package, I get the following message:
/adb shell pm enable radiotime.player
Package radiotime.player new state: disabled
So, even though I tried to enable the app, the new state still says disabled.
Any idea what I am doing wrong?
My phone is neither rooted nor is my bootloader unlocked. Using Android 11.
So while walking it slipped out from my hand and hit the lower left corner.. The screen didnt even work anymore (after removing the glas, it was clear why, as the connector is lower left corner).
Good thing is, I have adb debugging enabled and my keys are known.. So I can access adb shell and various commands..
My problem is: It rebooted and now, the important stuff is NOT mounted.. Also via scrcpy or MonkeyRemote, I cannot send any touch event... Its not reacting at all.. Honestly, I dont know what it is doing, but its quite busy writing for ever logs in logcat, that the sensors have errors (which is no wonder).
So I tried various "adb shell input XXX", but its not working at all..
Tried to connect a mouse via normal usb-c hub, but I dont know if I would need an OTG cable or if it would even work.
DrFone and some other software, already wants the money, before unlocking anything.. And I would be Ok, if it would be 5-10€.. But buying the whole thing for 1 test, is a big no.
So my status:
adb shell working.
scrcpy at least showing a screen
phone is not reacting on anything else, besides the lockscreen to wake it up.. volume keys are also kinda ignored.
I tried the adb shell input stuff from stackoverflow, but nope.
Can I boot in any recovery thing and mount sdcard there? Does scrcpy work there?
What he heck is my phone even doing?? If I connect another phone in lockscreen and use scrcpy, I can also wake it up normaly.. So probably not only the screen got dmg while flying :/
Most annoying things: It has alarms going off all the time, as I can only snooze them -.-
Is there no command, to unlock it from adb/terminal? I know the damn pin
When I run top, the top most things are sufaceflinger and logd (between 2-15). So its not like sth is always at 100% cpu load..
So little status update:
all adb shell input XXX are simple not working, as Xiaomi needs another setting for that.. Which I cannot activate, without screen.
I will try a manual keyboard at home..
Is there a way, to root it with adb only? Would help me alot..
MIUI security center requires you bonded MI account to enable adb input commands in developer options. scrcpy has OTG mode and can emulate HID device.
scrcpy also didnt work, without that stupid setting set to be true/1.
Tested with my old Mi6. When I enabled the option in dev-settings, it worked fine.
But I was able to unlock it with a keyboard plugged in (+ mouse). Looks like the CPU also has some issues, as everything is slow-motion..
So I just tried, what do I need to press on the Mi6 -> then did it on the Mi9.
"hitting space -> pin -> enter", "hitting space -> pin -> enter".
But was able to rescue all my data + turn off the alarms.
PS.: I then tried to enable this setting, for inputs, but you need to have a SIM cart inserted, to activate it
PPS.: Oh.. Now I got you.. I have to enable this option in scrcpy.. OMG Will test that now
PPPS.: Yeah, with that otg mode, the keyboard and mouse would have also worked.. Well, for the next time I know it
alecxs said:
MIUI security center requires you bonded MI account to enable adb input commands in developer options. scrcpy has OTG mode and can emulate HID device.
Click to expand...
Click to collapse
Ok, thanks - that was missing
If you figure out the command line to enable it from adb settings put global I am very grateful
alecxs said:
If you figure out the command line to enable it from adb settings put global I am very grateful
Click to expand...
Click to collapse
Ok, so I dumped all settings and props to files:
Code:
adb shell settings list global > global.txt
adb shell settings list secure > secure.txt
adb shell settings list system > system.txt
adb shell getprop > props.txt
then searched for adb, usb and similar butfound only the following:
SETTINGS GLOBAL:
adb_enabled=1
adb_wifi_enabled=0
verifier_verify_adb_installs=1
GETPROP:
persist.security.adbinput=1
persist.security.adbinstall=1
(My phone: Mi 11 Lite 5G NE, MIUI 13)
That is, eg ADB can be enabled/disabled as settings global adb_enabled
However, ADB Input is not in settings but as persistent prop persist.security.adbinput and it can be only manipulated by Magisk - and by TWRP but on the old devices where System is not read-only
IMO, it would be theoretically possible on the Mi 9T Pro, but not if display is broken where TWRP cannot be used (I doubt there is anything like scrpy that works for TWRP)
zgfg said:
Ok, so I dumped all settings and props to files:
Code:
adb shell settings list global > global.txt
adb shell settings list secure > secure.txt
adb shell settings list system > system.txt
adb shell getprop > props.txt
then searched for adb, usb and similar butfound only the following:
SETTINGS GLOBAL:
adb_enabled=1
adb_wifi_enabled=0
verifier_verify_adb_installs=1
GETPROP:
persist.security.adbinput=1
persist.security.adbinstall=1
(My phone: Mi 11 Lite 5G NE, MIUI 13)
That is, eg ADB can be enabled/disabled as settings global adb_enabled
However, ADB Input is not in settings but as persistent prop persist.security.adbinput and it can be only manipulated by Magisk - and by TWRP but on the old devices where System is not read-only
IMO, it would be theoretically possible on the Mi 9T Pro, but not if display is broken where TWRP cannot be used (I doubt there is anything like scrpy that works for TWRP)
Click to expand...
Click to collapse
Btw (sorry, OT for the originally reported problem), Netflix cannot be fooled (DRM) to display over scrcpy, only subtitles are displayed on the PC
YT works fine (although without sound - I will try with sndcpy), and strcpy properly recognizes landscape orientation, hence window on the PC can be stretched over the whole monitor
Edit: On the other PC I tried, audio works fine with scrcpy
zgfg said:
However, ADB Input is not in settings but as persistent prop persist.security.adbinput and it can be only manipulated by Magisk - and by TWRP but on the old devices where System is not read-only
Click to expand...
Click to collapse
Nice! I was curious because I don't have Mi account. Although I didn't have this property, just set it from resetprop anyway and it worked!
We can set it from magisk patched boot.img ramdisk/overlay.d/custom.rc systemless. or just add it in init.rc directly.
Code:
on boot
setprop persist.security.adbinput 1