i'm looking for a custom rom whith fully functional camera2 api, until february everything was working fine with the official rros, form the update of 25 feb i can't make any "pro" camera app work correctly. i tried some other roms and discovered that the Phoenix AOSP Extended has "functional" camera2 api, but there are problems, the stock camera port has the option to save RAWs but if that option is enabled it won't save anything at all, other apps (like manual camera) save correcly but the screen is always solid green. my question is: is there a custom rom with fully functional camera 2 api? or is there a way to have working camera2 api in rros (i think this is very unlikely without asking the devs)?
i prefer not going back to stock because of OMS and some features of the custom roms.
thank in advance.
Anyone using the new gcam with nightsight? Apparently eventhough bulit for oneplus 6 by arnov it works better with mi5 but im on miui rom and it won't work. So i wanted to know if anyone has used it before changing roms abd whether it works only on pie roms or anything from nougat.
It needs pie.
its pie only as of now use syberia os if you really want to try of btw its laggy and sluggish but actual camera performance is mind bobbling .
Custom Rom with Fingerprint Sensor working and Stable/Best Performance??
(Not GSI OR MIUIMIX)
Please make one for Redmi 8 Fans!!
also gcam with video working
look at the time if the smartphone get a official custom rom
This Module enables RAW Capture on the Galaxy A30, and changes the camera Hardware Level from Limited to Full.
RAW Capture is required for most GCams to work.
For information about GCam, go to this thread. It's for the A20, but contains useful information.
Click to expand...
Click to collapse
How does it work?
It works by replacing the library located at /vendor/lib/libexynoscamera3.so with an edited one. For reverse engineering enthusiasts, here is the patch applied to the library.
Prerequisites
- Magisk v20.4 or newer
- Android 11 vendor and kernel (Not compatible with versions of the Eureka Kernel older than 9.0)
Installation
Install as a normal Magisk Module, through Magisk Manager or TWRP.
Troubleshooting
Camera doesn't work, shows Black Screen
Make sure you are using a compatible Android 11 kernel and vendor.
If this issue is happening after updating your firmware, please let me know.
Telegram
GitHub
Download
Does this work with aosp based roms? Or is it just one UI?
Borkode said:
Does this work with aosp based roms? Or is it just one UI?
Click to expand...
Click to collapse
Yes, it works with AOSP.
What kernel you recommend to use in gsi ROM with this module?
SirKosichka said:
What kernel you recommend to use in gsi ROM with this module?
Click to expand...
Click to collapse
I don't know much about kernels for the A30. In my A20 with an Android 12 GSI i use stock kernel with some small modifications (dmverity disabled, MTP fixed for AOSP, etc.)
TBM 13 said:
I don't know much about kernels for the A30. In my A20 with an Android 12 GSI i use stock kernel with some small modifications (dmverity disabled, MTP fixed for AOSP, etc.)
Click to expand...
Click to collapse
bro, you can enable 60fps FHD record for our devices?
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
flunkyball said:
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
Click to expand...
Click to collapse
Probably, I would have to check their libexynoscamera3.so library.
flunkyball said:
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
Click to expand...
Click to collapse
I just checked the library of the Galaxy S10 and yes, it should be possible. However, doesn't it already support RAW?
TBM 13 said:
However, doesn't it already support RAW?
Click to expand...
Click to collapse
On the stock rom it probably does.
For the S10/20 on LOS only standard and wide lens are accessable whereas the telephoto is not.
On the S10 for LOS 17.1 I therefore had a patched "libexynoscamera3.so" as well granting access to telephoto lens via gcam.
However for LOS 18.1/19.0 or even for my new phone the S20 I was not able to find any patched libs anymore since nobody took the effort of reverse engineering it as you did.
Would you be willing to make the necessary adaption for your patcher to successfully enable raw on all lenses for LOS 18.1/19 on the S10/20 ?
flunkyball said:
On the stock rom it probably does.
For the S10/20 on LOS only standard and wide lens are accessable whereas the telephoto is not.
On the S10 for LOS 17.1 I therefore had a patched "libexynoscamera3.so" as well granting access to telephoto lens via gcam.
However for LOS 18.1/19.0 or even for my new phone the S20 I was not able to find any patched libs anymore since nobody took the effort of reverse engineering it as you did.
Would you be willing to make the necessary adaption for your patcher to successfully enable raw on all lenses for LOS 18.1/19 on the S10/20 ?
Click to expand...
Click to collapse
Sure. Do you have Telegram?
Bro, you can make this mod for Android 10 vendor?
SirKosichka said:
Bro, you can make this mod for Android 10 vendor?
Click to expand...
Click to collapse
Technically, yes. However, in the A20 enabling RAW in the Android 10 library makes the camera freeze after some seconds in apps like GCam.
If you are willing to test, i can do it, maybe the A30 doesn't have the same issue.
Bro will this mod work for Galaxy A30 (Android 11) ??
Edit: I'm sorry....for a moment I thought this mod for A20.....Sorry again.
Hridoyz said:
this mod work for Galaxy A30 (Android 11) ??
Click to expand...
Click to collapse
Yes, only on gsi or Oneui3.1 ROMs.You need ROM with 11 vendor
Version 2.1 of the module released, the biggest change is that there is no longer a need to change the Black Level in GCam settings, so GCams (or other camera apps) that don't have this option should now take photos without pink tint.
Full changes can be found here.
not work in A305f
Ali1412 said:
not work in A305f
Click to expand...
Click to collapse
That's not really helpful. What is happening to make you say it doesn't work, black screen? What ROM are you using? What kernel? What vendor, the one that comes with the ROM, stock Android 11 vendor or a custom one? What camera apps did you try?
TBM 13 said:
That's not really helpful. What is happening to make you say it doesn't work, black screen? What ROM are you using? What kernel? What vendor, the one that comes with the ROM, stock Android 11 vendor or a custom one? What camera apps did you try?
Click to expand...
Click to collapse
use stock rom and stock vendor and stock kernel android11 (ONE UI 3.1) and have black screen
Ali1412 said:
use stock rom and stock vendor and stock kernel android11 (ONE UI 3.1) and have black screen
Click to expand...
Click to collapse
on Snake OS 5 gcam support included
Hey there hello
So I've been playing around with custom roms for a 1.5 year. I think I have enough experience and now I'm starting to get interested in mods and ports
Idk much about that and I just want to start asking how do I install the Xiaomi stock camera app in my Redmi Note 10 Pro with a custom ROM installed on it.
Also if anyone can explain me what does been "ported" mean thanks
just a xda user said:
Hey there hello
So I've been playing around with custom roms for a 1.5 year. I think I have enough experience and now I'm starting to get interested in mods and ports
Idk much about that and I just want to start asking how do I install the Xiaomi stock camera app in my Redmi Note 10 Pro with a custom ROM installed on it.
Also if anyone can explain me what does been "ported" mean thanks
Click to expand...
Click to collapse
May a ROM developer can help you.
But it's really difficult to get MIUI cam working in non MIUI Roms.....
just a xda user said:
Hey there hello
So I've been playing around with custom roms for a 1.5 year. I think I have enough experience and now I'm starting to get interested in mods and ports
Idk much about that and I just want to start asking how do I install the Xiaomi stock camera app in my Redmi Note 10 Pro with a custom ROM installed on it.
Also if anyone can explain me what does been "ported" mean thanks
Click to expand...
Click to collapse
Ported/Porting/Ports means a specific software that only works on selected devices and giving it support to work for other devices.
In the case of your question, Xiaomi Cam, or MIUI Cam, is the default camera application for Xiaomi devices tunes by Xiaomi themselves and only works for Xiaomi devices, with specific features for each devices.
ANX Camera is the port of MIUI Camera that works for Custom ROM and some non-miui based OS. ANX is a Magisk Module too meaning you'll have to root your phone to install systemlessly. Link to the download:
ANXCamera by AEonAX
Download latest ANXCamera, A Miui Camera Port for Xiaomi's Devices, Install via Magisk or TWRP
camera.aeonax.com
I recommend you to use v204 even though it's an alpha release to get the closest camera quality similar to stock. If that doesn't work, try the stable release which are 190R or 185R.