This Module enables RAW Capture on the Galaxy A30, and changes the camera Hardware Level from Limited to Full.
RAW Capture is required for most GCams to work.
For information about GCam, go to this thread. It's for the A20, but contains useful information.
Click to expand...
Click to collapse
How does it work?
It works by replacing the library located at /vendor/lib/libexynoscamera3.so with an edited one. For reverse engineering enthusiasts, here is the patch applied to the library.
Prerequisites
- Magisk v20.4 or newer
- Android 11 vendor and kernel (Not compatible with versions of the Eureka Kernel older than 9.0)
Installation
Install as a normal Magisk Module, through Magisk Manager or TWRP.
Troubleshooting
Camera doesn't work, shows Black Screen
Make sure you are using a compatible Android 11 kernel and vendor.
If this issue is happening after updating your firmware, please let me know.
Telegram
GitHub
Download
Does this work with aosp based roms? Or is it just one UI?
Borkode said:
Does this work with aosp based roms? Or is it just one UI?
Click to expand...
Click to collapse
Yes, it works with AOSP.
What kernel you recommend to use in gsi ROM with this module?
SirKosichka said:
What kernel you recommend to use in gsi ROM with this module?
Click to expand...
Click to collapse
I don't know much about kernels for the A30. In my A20 with an Android 12 GSI i use stock kernel with some small modifications (dmverity disabled, MTP fixed for AOSP, etc.)
TBM 13 said:
I don't know much about kernels for the A30. In my A20 with an Android 12 GSI i use stock kernel with some small modifications (dmverity disabled, MTP fixed for AOSP, etc.)
Click to expand...
Click to collapse
bro, you can enable 60fps FHD record for our devices?
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
flunkyball said:
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
Click to expand...
Click to collapse
Probably, I would have to check their libexynoscamera3.so library.
flunkyball said:
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
Click to expand...
Click to collapse
I just checked the library of the Galaxy S10 and yes, it should be possible. However, doesn't it already support RAW?
TBM 13 said:
However, doesn't it already support RAW?
Click to expand...
Click to collapse
On the stock rom it probably does.
For the S10/20 on LOS only standard and wide lens are accessable whereas the telephoto is not.
On the S10 for LOS 17.1 I therefore had a patched "libexynoscamera3.so" as well granting access to telephoto lens via gcam.
However for LOS 18.1/19.0 or even for my new phone the S20 I was not able to find any patched libs anymore since nobody took the effort of reverse engineering it as you did.
Would you be willing to make the necessary adaption for your patcher to successfully enable raw on all lenses for LOS 18.1/19 on the S10/20 ?
flunkyball said:
On the stock rom it probably does.
For the S10/20 on LOS only standard and wide lens are accessable whereas the telephoto is not.
On the S10 for LOS 17.1 I therefore had a patched "libexynoscamera3.so" as well granting access to telephoto lens via gcam.
However for LOS 18.1/19.0 or even for my new phone the S20 I was not able to find any patched libs anymore since nobody took the effort of reverse engineering it as you did.
Would you be willing to make the necessary adaption for your patcher to successfully enable raw on all lenses for LOS 18.1/19 on the S10/20 ?
Click to expand...
Click to collapse
Sure. Do you have Telegram?
Bro, you can make this mod for Android 10 vendor?
SirKosichka said:
Bro, you can make this mod for Android 10 vendor?
Click to expand...
Click to collapse
Technically, yes. However, in the A20 enabling RAW in the Android 10 library makes the camera freeze after some seconds in apps like GCam.
If you are willing to test, i can do it, maybe the A30 doesn't have the same issue.
Bro will this mod work for Galaxy A30 (Android 11) ??
Edit: I'm sorry....for a moment I thought this mod for A20.....Sorry again.
Hridoyz said:
this mod work for Galaxy A30 (Android 11) ??
Click to expand...
Click to collapse
Yes, only on gsi or Oneui3.1 ROMs.You need ROM with 11 vendor
Version 2.1 of the module released, the biggest change is that there is no longer a need to change the Black Level in GCam settings, so GCams (or other camera apps) that don't have this option should now take photos without pink tint.
Full changes can be found here.
not work in A305f
Ali1412 said:
not work in A305f
Click to expand...
Click to collapse
That's not really helpful. What is happening to make you say it doesn't work, black screen? What ROM are you using? What kernel? What vendor, the one that comes with the ROM, stock Android 11 vendor or a custom one? What camera apps did you try?
TBM 13 said:
That's not really helpful. What is happening to make you say it doesn't work, black screen? What ROM are you using? What kernel? What vendor, the one that comes with the ROM, stock Android 11 vendor or a custom one? What camera apps did you try?
Click to expand...
Click to collapse
use stock rom and stock vendor and stock kernel android11 (ONE UI 3.1) and have black screen
Ali1412 said:
use stock rom and stock vendor and stock kernel android11 (ONE UI 3.1) and have black screen
Click to expand...
Click to collapse
on Snake OS 5 gcam support included
Related
I'm a new 3T owner who got my phone just a few days ago (came from a Nexus 6P). I decided to load the FreedomOS rom initially because I was curious about OOS. Overall, I'm fairly content, but a few of my apps haven't worked correctly (e.g. Accubattery and Xfinity WiFi). I was curious about Resurrection Remix which, I believe, is based on Lineage.
I'm a bit apprehensive about loading a Lineage-based ROM primarily because I think I read something about Lineage not supporting some of the 3t's features (fast charging?). But after searching I can't find the thread I thought I read those warnings....so maybe I imagined it? Can anybody provide any clarity on if that's even an issue?
I'd also like some feedback from folks who have run the official RR Rom. Any downsides? Any benefits over FreedomOS? And the same question to FreedomOS users who have used RR...any feedback on why you prefer FOS over RR?
i'm on freedom rom right now wiht xceed kernel, loving it, i woudn't do AOSP or LOS based roms because you'll loose the camera functionality and manual mode
masri1987 said:
i'm on freedom rom right now wiht xceed kernel, loving it, i woudn't do AOSP or LOS based roms because you'll loose the camera functionality and manual mode
Click to expand...
Click to collapse
Do all Lineage-based ROMs (for the 3t) not have camera? What do you mean by "manual mode?"
zerozed99 said:
Do all Lineage-based ROMs (for the 3t) not have camera? What do you mean by "manual mode?"
Click to expand...
Click to collapse
They have, but no other ROM will have the same quality than OOS-based ROMs.
You can try this ported stock camera if you are using LineageOS: https://forum.xda-developers.com/oneplus-3/themes/port-oxygenos-stock-camera-cm-t3451721
Remember to flash "HAL1 Enabler for LOS(and based on it): LineageOS" also from the same page.
Not sure which things are working and which aren't, some says that 1080p 60fps videos are not, but atleast I was able to take the video with that ported camera app, not sure was the outcome really 60fps.
Can't test any more of it for now, went back to H2OS 7.1.1 beta
zerozed99 said:
Do all Lineage-based ROMs (for the 3t) not have camera? What do you mean by "manual mode?"
Click to expand...
Click to collapse
Eremitus said:
They have, but no other ROM will have the same quality than OOS-based ROMs.
You can try this ported stock camera if you are using LineageOS: https://forum.xda-developers.com/oneplus-3/themes/port-oxygenos-stock-camera-cm-t3451721
Remember to flash "HAL1 Enabler for LOS(and based on it): LineageOS" also from the same page.
Not sure which things are working and which aren't, some says that 1080p 60fps videos are not, but atleast I was able to take the video with that ported camera app, not sure was the outcome really 60fps.
Can't test any more of it for now, wen't back to H2OS 7.1.1 beta
Click to expand...
Click to collapse
yeah basicaly non OOS roms won't have the same camera quality in terms of processing and features.
Camera blobs are out and there are some ports but non function similarly to how the camera functions on OOS
Eremitus said:
Can't test any more of it for now, wen't back to H2OS 7.1.1 beta
Click to expand...
Click to collapse
What do you like about H2OS? Is it difficult to get gapps working properly? How about other launchers? Any issues for an English-speaker US-based user?
zerozed99 said:
What do you like about H2OS? Is it difficult to get gapps working properly? How about other launchers? Any issues for an English-speaker US-based user?
Click to expand...
Click to collapse
i was wondering the same too
zerozed99 said:
What do you like about H2OS? Is it difficult to get gapps working properly? How about other launchers? Any issues for an English-speaker US-based user?
Click to expand...
Click to collapse
I dirty flashed it over OOS 4.03, everything seems to work fine, since Google apps were already there. I'm using Nova Launcher myself, can't spot any difference except language, since I was using finnish before, but there is english of course to choose.
Remember to take backup with TWRP if possible before flashing it easier to go back if you don't like it or something goes bad.
Edit.. seems that OOS 7.1.1 open beta 3 is here! http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_openbeta_3/
Well, if you really want 7.1.1 for OOS, you can just flash their Beta released today.
I'd say you should go for FreedomOS for now. All of the LineageOS and AOSP based roms have a buggy camera due to the buggy Camera HAL3. Only the ROMs based on OOS have a fully functional camera. You can also try out the OOS Open Beta 3 released earlier today, its based on 7.1.1
zerozed99 said:
What do you like about H2OS? Is it difficult to get gapps working properly? How about other launchers? Any issues for an English-speaker US-based user?
Click to expand...
Click to collapse
In fact, Hydrogen OS has gapps, just disabled. Install play store directly should be okay.
Mizart said:
I'd say you should go for FreedomOS for now. All of the LineageOS and AOSP based roms have a buggy camera due to the buggy Camera HAL3. Only the ROMs based on OOS have a fully functional camera. You can also try out the OOS Open Beta 3 released earlier today, its based on 7.1.1
Click to expand...
Click to collapse
Yeah, I think I'll probably stay put on FreedomOS unless I discover another OOS-based ROM with a dedicated dev. Resurrection Remix looks nice, but a buggy camera would be unacceptable for me.
I really appreciate all the feedback/advice. I'm not a newb, but am new to this handset so I really appreciate all the info you've shared.
I'm for RR :3
Egor Gunko said:
I'm for RR :3
Click to expand...
Click to collapse
Do you have any problems with it? What is your experience with the camera? What do you like most about it?
zerozed99 said:
Do you have any problems with it? What is your experience with the camera? What do you like most about it?
Click to expand...
Click to collapse
It's not my daily driver right now, but I've flashed it earlier, so I would say it's really good
Performance is smooth and fast, any bugs (so far), camera is fine, nearly compared to OxygenOS
I like a big amount of customizations the most ^^
I have tried PE 11 beta already. But the kernel causes issues when flashing Viper4android.
So, which is the best Android 11 custom ROM according to you guys? Does Viper work without breaking wifi? Also, which GCam works perfectly in Android 11?
my current ROM is https://forum.xda-developers.com/t/rom-unofficial-11-0-raphael-lineageos-18-1.4176901/
I don't use viper, so IDK if it works, and I use
NGCam_7.4.104-v2.0 - New Update[10-12-2020]
Apk Link: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1444/
XML files : https://gofile.io/d/eY1xLD by Mevcetin
for my gcam, USE THE CONFIG ASWELL.
Btw I don't think viper works with android 11 yet no sure tho.
QuadzHS said:
my current ROM is https://forum.xda-developers.com/t/rom-unofficial-11-0-raphael-lineageos-18-1.4176901/
I don't use viper, so IDK if it works, and I use
NGCam_7.4.104-v2.0 - New Update[10-12-2020]
Apk Link: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1444/
XML files : https://gofile.io/d/eY1xLD by Mevcetin
for my gcam, USE THE CONFIG ASWELL.
Btw I don't think viper works with android 11 yet no sure tho.
Click to expand...
Click to collapse
Nice. Viper doesn't work properly. Breaks notification and call sounds. Also breaks wifi sometimes if it's stock kernel. Thanks for the GCam link.
So, do you use any sound mods?
StockBreaker71 said:
Nice. Viper doesn't work properly. Breaks notification and call sounds. Also breaks wifi sometimes if it's stock kernel. Thanks for the GCam link.
So, do you use any sound mods?
Click to expand...
Click to collapse
Currently the best a11 rom based on miui vendor will be Evolution X AND WIFI will break on perf kernel u will need to flash any other kernel for it to work.
Gcam i use Urnyx's 7.3 v2.5 as it works as a good replacement for anx camera and doesn't has lot of things to tweak around simple and easy gcam but with less features.
Ezio553 said:
Currently the best a11 rom based on miui vendor will be Evolution X AND WIFI will break on perf kernel u will need to flash any other kernel for it to work.
Gcam i use Urnyx's 7.3 v2.5 as it works as a good replacement for anx camera and doesn't has lot of things to tweak around simple and easy gcam but with less features.
Click to expand...
Click to collapse
Yeah. EvoX seems like the best A11 ROM right now. I hope there'll be some improvements once MIUI 12.5 vendor is out.
I use the same GCam too. Still waiting for a proper GCam 8
StockBreaker71 said:
Yeah. EvoX seems like the best A11 ROM right now. I hope there'll be some improvements once MIUI 12.5 vendor is out.
I use the same GCam too. Still waiting for a proper GCam 8
Click to expand...
Click to collapse
do u use any other gcam specifically for video related stuff.
Ezio553 said:
do u use any other gcam specifically for video related stuff.
Click to expand...
Click to collapse
Nah. I don't really shoot videos that often. Right now, I only have GCam and ANX. Tried NGCam, but it crashed at times
Where can we find custom roms for the s21?
My last samsung was the s10 and many roms where availble for it and now I cant find and rom
Not available, for now! Maybe in the future!
MichelH1973 said:
Where can we find custom roms for the s21?
My last samsung was the s10 and many roms where availble for it and now I cant find and rom
Click to expand...
Click to collapse
I'm quite suprised ther isn't any for the S21. It's the first device I've had for many years that have not had a custom rom available.
TheATHEiST said:
I'm quite suprised ther isn't any for the S21. It's the first device I've had for many years that have not had a custom rom available.
Click to expand...
Click to collapse
To be precise, there is no need for custom ROMs because of GSIs and Treble-Support.
There is LineageOS, Pixel Experience and many others to choose from. I'm daily driving PE currently.
Freisturz said:
To be precise, there is no need for custom ROMs because of GSIs and Treble-Support.
There is LineageOS, Pixel Experience and many others to choose from. I'm daily driving PE currently.
Click to expand...
Click to collapse
How? PE says not supported?
MrFubar121 said:
How? PE says not supported?
Click to expand...
Click to collapse
There is documentation on https://github.com/phhusson/treble_experimentations/wiki. PE is not officially supported, but there are PE GSI Roms maintained by others and because these are GSIs, they basically don't really need official support.
See also:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
and
Guide for Installing GSI on Exynos2100 devices
Guide for Installing GSI on Exynos2100 devices. GitHub Gist: instantly share code, notes, and snippets.
gist.github.com
for a clear set of instructions.
I am interested in bringing my oneui based project for s21 but cant seem to find any dedicated telegram group or something where I can reach wider audiance.
My project https://forum.xda-developers.com/t/projectx-rom-oneui-based.4450045/
BeyondROM is compatible with S21, S21+, S21U ( [SM-G991B], [SM-G996B], [SM-G998B] )
[ROM] BeyondROM v5.3 [15/05/2023]-[EWE1]-[EXYNOS]-[SM-G99xB]
Latest Version v5.3 [15/05/2023] ROM Maintainer: Andrei @starbucks2010 ROM Info: Supported devices: [SM-G991B], [SM-G996B], [SM-G998B] ROM Base: G998BXXU7EWE1 (Android 13 OneUI 5.1) May 2023 Patch Level ROM Features: Not working...
forum.xda-developers.com
Freisturz said:
To be precise, there is no need for custom ROMs because of GSIs and Treble-Support.
There is LineageOS, Pixel Experience and many others to choose from. I'm daily driving PE currently.
Click to expand...
Click to collapse
Is fingerprint sensor working fine in PE GSI?
How about reverse wireless charging (wireless power share) function?
ChessPiece said:
Is fingerprint sensor working fine in PE GSI?
How about reverse wireless charging (wireless power share) function?
Click to expand...
Click to collapse
Fingerprint sensor worked fine, but I haven't used/tested reverse charging. I think reverse charging is dependant on the circuit and not software, but I'm not sure.
I'm currently on a Pixel 7, so I can't test it anymore.
ChessPiece said:
Is fingerprint sensor working fine in PE GSI?
How about reverse wireless charging (wireless power share) function?
Click to expand...
Click to collapse
PE GSI on S21 (G991B):
Fingerprint works fine.
Reverse wireless charging works fine.
I am using Samsung m31, Exynos 9611, this phone is Project Treble supported. Does anyone tried GSI?
As it is running on exynos any chance?
Yes, it runs. I am currently using Corvus OS on M31s.
Install TWRP as mentioned for your device and then follow this guide
How to flash a Generic System Image (GSI) on Project Treble supported devices
So your device supports Project Treble, what does that mean for you? It means you can flash a Generic System Image such as LineageOS or Resurrection Remix! Enjoy AOSP-based custom ROMs! Here's a guide on how to install these ROMs.
www.xda-developers.com
Khushtaur3123 said:
Yes, it runs. I am currently using Corvus OS on M31s.
Install TWRP as mentioned for your device and then follow this guide
How to flash a Generic System Image (GSI) on Project Treble supported devices
So your device supports Project Treble, what does that mean for you? It means you can flash a Generic System Image such as LineageOS or Resurrection Remix! Enjoy AOSP-based custom ROMs! Here's a guide on how to install these ROMs.
www.xda-developers.com
Click to expand...
Click to collapse
Can you explain how you installed corvus os on m31s?
Thanks in advance
Installed TWRP as mentioned in the forum.
Followed the steps for TWRP way of installing GSI in the link of my precious posts in this thread. Normally, boot into the GSI. That's it.
PS - Only Corvus OS allows SafetynetBypass. I have tried it on phhussons GSI and haven't been able to pass safetynet. Even dabbled with magisk hide prop config. Wasn't able to achieve anything.
Khushtaur3123 said:
Installed TWRP as mentioned in the forum.
Followed the steps for TWRP way of installing GSI in the link of my precious posts in this thread. Normally, boot into the GSI. That's it.
PS - Only Corvus OS allows SafetynetBypass. I have tried it on phhussons GSI and haven't been able to pass safetynet. Even dabbled with magisk hide prop config. Wasn't able to achieve anything.
Click to expand...
Click to collapse
Also, no GSI provides stable experience for long term as the stock with root. I am now running stock on my M31s as I need a working phone for use.
Khushtaur3123 said:
Also, no GSI provides stable experience for long term as the stock with root. I am now running stock on my M31s as I need a working phone for use.
Click to expand...
Click to collapse
Ok, do we have any bugs with corvus os?
Yeah, you might encounter some unstability. But overall experience is really good. The phone is responsive most of the time. You could try if you want to see what it is. I haven't gone back to Corvus, ever since Android 12 update came, so maybe the new firmware might have added some fixes.
Khushtaur3123 said:
Yeah, you might encounter some unstability. But overall experience is really good. The phone is responsive most of the time. You could try if you want to see what it is. I haven't gone back to Corvus, ever since Android 12 update came, so maybe the new firmware might have added some fixes.
Click to expand...
Click to collapse
Yeah, I'm fascinated by the responsiveness of the corvus os. And this new android stock update is eating up more RAM. And I feel one UI 4.1 is not good as 3.1.
I'm thinking of weather to switch to gsi or not.
For long usability, what do you think will be the better option?
Switch to GSI or reset the existing stock rom user data?
Have you root
dinesh99639 said:
Yeah, I'm fascinated by the responsive of the corvus os. And this new android stock update is eating up more RAM. And I feel one UI 4.1 is not good as 3.1.
I'm thinking of weather to switch to gsi or not.
For long usability, what do you think the better option?
Switch to GSI or reset the existing stock rom user data?
Click to expand...
Click to collapse
Have you rooted your phone? If you have, give the GSI a try. If not, try following ONE UI Optimization guide on xda itself. Then, decide, whether you want it or not. I use slightly debloated ONE UI 4 rooted and with certain floating feature tweaks and build.prop tweaks as well. It has given me good mileage, but not as much as the Redmi Note 5 Pro, when I installed Superior OS A12 on it. But it will be definitely better than factory.
Edit spelling
Khushtaur3123 said:
Have you root
Have you rooted your phone? If you have, give the GSI a try. If not, try following ONE UI Optimization guide on xda itself. Then, decide, whether you want it or not. I use slightly debloated ONE UI 4 rooted and with certain gloating feature tweaks and build.prop tweaks as well. It has given me good mileage, but not as much as the Redmi Note 5 Pro, when I installed Superior OS A12 on it. But it will be definitely better than factory.
Click to expand...
Click to collapse
Here https://forum.xda-developers.com/t/guide-no-root-complete-samsung-oneui-optimization.4376755/
You will definitely need a second phone if you want to try GSI
Khushtaur3123 said:
Have you root
Have you rooted your phone? If you have, give the GSI a try. If not, try following ONE UI Optimization guide on xda itself. Then, decide, whether you want it or not. I use slightly debloated ONE UI 4 rooted and with certain gloating feature tweaks and build.prop tweaks as well. It has given me good mileage, but not as much as the Redmi Note 5 Pro, when I installed Superior OS A12 on it. But it will be definitely better than factory.
Click to expand...
Click to collapse
No, I haven't rooted me phone. I'll try one ui optimization .
Thank you for your suggestion
You could always try another GSI. https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Khushtaur3123 said:
You will definitely need a second phone if you want to try GSI
Click to expand...
Click to collapse
Oh, I don't have second phone. I think it is better to stay on stock rom.
Thank you very much
Khushtaur3123 said:
You will definitely need a second phone if you want to try GSI
Click to expand...
Click to collapse
Are volte and calls working fine?
Don't expect VoLTE on exynos on any GSI. Calls work OK.
put this apk into /system/product/overlay of *.img file before you flashed it with fastboot tool
source code:
Added Redmi Note 10 5G / POCO M3 Pro/5G · phhusson/[email protected]
This includes hardware-specific overlays for Treble ROM - Added Redmi Note 10 5G / POCO M3 Pro/5G · phhusson/[email protected]
github.com
nice!!!!
How i can put the apk into gsi??
wetito said:
How i can put the apk into gsi??
Click to expand...
Click to collapse
guess that’ll work on vndklite version only.
wetito said:
How i can put the apk into gsi??
Click to expand...
Click to collapse
Open the img and drag it through software in win.
Is that this fixes the brightness slider?
for me magisk fix module+suggested pphsettings with Arrow gsi VNDKLITE solve problems. also Volte works fine. no lags. for me this is the best gsi. with magisk i have added a couple of tweaks that have ulteriory emproved the sytem performance. i'm happy after one year to be reswitched to android. sure my next device will be a pixel (like 6A)
up864 said:
Open the img and drag it through software in win.
Click to expand...
Click to collapse
i'm on linux, so i suppose i had to search the right app or the command line. no particular permission to set? just pull apk into gsi?
wetito said:
for me magisk fix module+suggested pphsettings with Arrow gsi VNDKLITE solve problems. also Volte works fine. no lags. for me this is the best gsi. with magisk i have added a couple of tweaks that have ulteriory emproved the sytem performance. i'm happy after one year to be reswitched to android. sure my next device will be a pixel (like 6A)
Click to expand...
Click to collapse
Did you try the overlay
Fire1511 said:
Did you try the overlay
Click to expand...
Click to collapse
no, i flashed with overlay included by default
wetito said:
i'm on linux, so i suppose i had to search the right app or the command line. no particular permission to set? just pull apk into gsi?
Click to expand...
Click to collapse
The overlay will be included in all phh gsi since september update. Just use latest gsi to avoid modifying it:
Gsi_projects - Browse /v415-Sep at SourceForge.net
sourceforge.net
wetito said:
for me magisk fix module+suggested pphsettings with Arrow gsi VNDKLITE solve problems. also Volte works fine. no lags. for me this is the best gsi. with magisk i have added a couple of tweaks that have ulteriory emproved the sytem performance. i'm happy after one year to be reswitched to android. sure my next device will be a pixel (like 6A)
Click to expand...
Click to collapse
What modules to improve system performance pls my system is slow and laggy
arrow gsi ndklite version by default is not laggy.
for my experience the most import things to do the best flsh gsi is:
start from the most compatible stock miui (i have choice lastest EEA for me)
flash system direct into slot a WITHOUT ERASE SYSTEM PARTION
i have do this and now my system is fast and smooth
the module is aosp enhancer, but i think it work fine only under a system good optimized by default
After many attempts, I think I have found the best procedure. Or at least the one that satisfies me the most
wetito said:
arrow gsi ndklite version by default is not laggy.
for my experience the most import things to do the best flsh gsi is:
start from the most compatible stock miui (i have choice lastest EEA for me)
flash system direct into slot a WITHOUT ERASE SYSTEM PARTION
i have do this and now my system is fast and smooth
the module is aosp enhancer, but i think it work fine only under a system good optimized by default
After many attempts, I think I have found the best procedure. Or at least the one that satisfies me the most
Click to expand...
Click to collapse
I erased system partition
wetito said:
arrow gsi ndklite version by default is not laggy.
for my experience the most import things to do the best flsh gsi is:
start from the most compatible stock miui (i have choice lastest EEA for me)
flash system direct into slot a WITHOUT ERASE SYSTEM PARTION
i have do this and now my system is fast and smooth
the module is aosp enhancer, but i think it work fine only under a system good optimized by default
After many attempts, I think I have found the best procedure. Or at least the one that satisfies me the most
Click to expand...
Click to collapse
Are u sure u didn't encounter any scrolling lag on apps like discord youtube?
No is perfect
up864 said:
put this apk into /system/product/overlay of *.img file before you flashed it with fastboot tool
source code:
Added Redmi Note 10 5G / POCO M3 Pro/5G · phhusson/[email protected]
This includes hardware-specific overlays for Treble ROM - Added Redmi Note 10 5G / POCO M3 Pro/5G · phhusson/[email protected]
github.com
Click to expand...
Click to collapse
this overlay is already present into latest gsi
wetito said:
this overlay is already present into latest gsi
Click to expand...
Click to collapse
yes, after i wrote this post.