Hi all,
I dropped my water bottle on my phone the other day and it has caused the display to go completely black - I believe I can still unlock the phone as I can feel the fingerprint sensor vibrate when using it.
I stupidly didn't enable USB debugging and am just wondering - seeing as I can't mirror wirelessly - if plugging in a USB C to VGA adaptor will allow me to mirror my screen to my TV?
Just wondering if anyone else has tried.
Thanks in advance!
no.
mi 9 has usb 2.0. doesn't support video via usb-c
Related
I have been using slimport for awhile now. Wondering is it possible to connect to a external displace that has touch capabilite using the slimport. Possible using otg cable to usb hbu then connecting usb from screen that utilieses touch control and also connecting slimport to hub then hdmi to screen. Has anyonr tried this or wants to help out develop this more with me?
Hi,
I have got Honor 9 lite LLD-L21 8.0.0.135(C185) and I have bought endoscope USB camera.
APK camerafi see it as unknown device(1908,2311) but read it's spec 640x480, YUYV, 30 FPS and I dont have view.
Have you any solution, idea?
Spec phone and OTG apk show that USB OTG is enabled for my phone.
Cam works with other phones.
I heard something about root, kernel or low USB voltage are responisble, could you agree with it?
Any repilies, solutions will helpfull.
Thx.
All I can tell you is otg works fine on this device in terms of plugging in a USB stick
I've no idea what the requirements are for the camera you have
You can always get an otg cable with power
https://www.amazon.co.uk/KIMILAR-Mi...=otg+cable&dpPl=1&dpID=21lsgRzC+JL&ref=plSrch
bosniak1989 said:
Hi,
I have got Honor 9 lite LLD-L21 8.0.0.135(C185) and I have bought endoscope USB camera.
APK camerafi see it as unknown device(1908,2311) but read it's spec 640x480, YUYV, 30 FPS and I dont have view.
Have you any solution, idea?
Spec phone and OTG apk show that USB OTG is enabled for my phone.
Cam works with other phones.
I heard something about root, kernel or low USB voltage are responisble, could you agree with it?
Any repilies, solutions will helpfull.
Thx.
Click to expand...
Click to collapse
I am having the same problem. I purchased this camera
https://www.amazon.com/dp/B07MZQ6KVR
I can connect to my Macbook Pro and it shows the image. But when I connect it to my Huawei Honor 7x the phone does not see the camera. I use female USB to micro usb cable, since the Honor7x has micro usb port. Have you found a way to make it work?
TheFixItMan said:
All I can tell you is otg works fine on this device in terms of plugging in a USB stick
I've no idea what the requirements are for the camera you have
You can always get an otg cable with power
https://www.amazon.co.uk/KIMILAR-Micro-Cable-Samsung-Galaxy/dp/B00V9XS4V4/ref=mp_s_a_1_4?ie=UTF8&qid=1547132105&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=otg+cable&dpPl=1&dpID=21lsgRzC+JL&ref=plSrch
Click to expand...
Click to collapse
What does the OTG cable do? It has one female USB port which would connect to the camera, one male micro usb port which would connect to the phone. What does the female micro usb port serve for? Where does the power come from?
Is there any way to make dualshock 4 work on mi9 without lag or duplicate commands?
Tried Bluetooth auto connect, but it makes no difference
LE: otg usb connection doesn't work at all
apoklyps3 said:
Is there any way to make dualshock 4 work on mi9 without lag or duplicate commands?
Tried Bluetooth auto connect, but it makes no difference
LE: otg usb connection doesn't work at all
Click to expand...
Click to collapse
Magisk module will fix it
I'd rather not root the phone.
will lose wedevine level...
Hey !
For me, using the Dualshock 4 via Bluetooth is impossible, it lags and duplicate commands, but it actually works perfectly via OTG
how?
Plugged it in my MI 9 and nothing happens.
I'm using original MI 9 charger cable and and otg micro usb adapter like this.
no reaction at all.
even tried a usb-c to hdmi hub (has hdmi, USB port and PD). nothing.
apoklyps3 said:
how?
Plugged it in my MI 9 and nothing happens.
I'm using original MI 9 charger cable and and otg micro usb adapter like this.
no reaction at all.
even tried a usb-c to hdmi hub (has hdmi, USB port and PD). nothing.
Click to expand...
Click to collapse
Is the OTG working on other devices?
I'm using a Samsung one (see attachments), it's the one included in the Galaxy S10 box, a friend gave it to me because he had one already, you can find it here
I just plug the controller inside the USB and then plug the OTG in the phone using the Type C
I think you are actually plugging the phone into the controller because the OTG you sent me is a Micro USB one, so you might be plugging your phone into the OTG that you actually plug into the controller
I see but also tried one of these:
RON 26.05 32%OFF | Kebidu Type-C Female Adapter Usb Type-C Hub Adapter 3-in-1 USB C hub to HDMI USB3.0 with Charging Converter
https://s.click.aliexpress.com/e/2dG8IbBa
Which I'm essence is the same as otg using the hub and still nothing
unfortunately xiaomi screwed us again.
although android 10 comes with dualshock 4 support, it's nowhere to be seen in miui11
so here's the deal, both of my Dualshock 4 controllers are v1.
Borowed a V2 from a friend, no lag whatsoever. not sure, but I suspect a driver issue on the phone side with v1
Rooted mi9 ps4 controller
Hello, is it possible to root a Xiaomi mi9 and use ps4 controller?
Hi,
Could you please le me know which HDMI hub or cable (usb-c to HDMI) you use to display the mobile screen on TV?
I bought an UGREEN, model CM314, with HDMI Port 4K x 2K/60Hz which unfortunately does not seem to work.
Please check photo attached with the image displayed on the TV after connecting the mobile using my Ugreen hub.
Any recommendation is very much appreciated.
Thank you!
Hi emiorosa,
i tried this adapter with my 8T with success.
Amazon.com
I connected the monitor to the dongle HDMI port first and then plugged it into my phone and it worked.
the VGA connection flashed my phone display on the screen but then disappeared so that didnt really work but HDMI worked great.
It seemed like it reduced the refresh rate to 60hz though.
Brian
Hello, my M31 is broken : the screen is black, BUT he's working fine it seems as I can hear notifications in parallel of my new phone.
Do you think it's possible to have the screen on my TV via an USB-C to HDMI cable? My purpose would be to try auhorizing file access to recover my photographs.
I already tried with a UGREEN dock (1 HDMI, 3/4 USB) but it didn't work : is it because a special dock is needed or because M31 doesn't allow the screen image to go via USB-C to any TV / screen.
Amazon.com: Volt Plus Tech HDMI 4K USB-C Kit Works for Samsung Galaxy M31 Professional Adapter with Digital Full 2160p, 60Hz Output! : Electronics
Buy Volt Plus Tech HDMI 4K USB-C Kit Works for Samsung Galaxy M31 Professional Adapter with Digital Full 2160p, 60Hz Output!: HDMI Cables - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Ok, thanks a lot for your message.
I saw a large number of advertising like this. The UGreen I bought was capable of android devices but it didn't work with my M31 (nor with a Xiaomi Poco X3 Pro or a One Plus Nord N100). Are you sur it works? (I mean usb-c on M31 is 2.0 is it ready for hdmi signal handling?).
Anyway, if something can work, I would prefer a hub with 2/3 usb connectors so that I could have a mouse and a keyboard... and why not a hard drive.
Hello it seems that the above mink is just an advertising I found the same for oneplus at amazon.ca https://www.google.com/url?sa=t&sou...UQFnoECBcQAQ&usg=AOvVaw1UaDF9c9BDdOhZjCq-jcDo
Did anybody with a M31 tried a hub?
USB 2.0 thoroughput is not enough for Video output. The devices that you mentioned does support Video out because they specifically support video alt mode with type c. You should have bought another device for this.
If you had usb debugging enable you could have use ADB video copier that allowed seeing you on PC. You could definitely access the storage on PC, can't you?
GitHub - Genymobile/scrcpy: Display and control your Android device
Display and control your Android device. Contribute to Genymobile/scrcpy development by creating an account on GitHub.
github.com
Hello, too bad : I hadn't usb debugging enabled...
I cannot install any app on my device : screen is broken, no possibility to handle anything (since the time I broke I can hear notifications but that's all).
You can connect to PC and use smart switch to take backup
jimbart40 said:
Hello, too bad : I hadn't usb debugging enabled...
I cannot install any app on my device : screen is broken, no possibility to handle anything (since the time I broke I can hear notifications but that's all).
Click to expand...
Click to collapse
See the reply before this
Hello, thank you for your message : when launching smartswitch it asks me to enter the pasword onto the phone device : as I have no way to perform this (no screen, no longer any pixel working on the phone screen) it's not the solution I'm waiting for.
Concerning scrcpy : I tried to install it on my Windows personnal computer (downlaoding the scrpy.zip, unzipping, launchine scrpy.exe ... ) BUT nothing occurs when I launch the app :\