Related
[ROM][AOSP][Nightly/Release] CarbonROM KitKat [jflte/i9500]
About Carbon
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonDev GitHub. and on our Gerrit CarbonDev Gerrit.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Features
All of our features can be found on our site here:
Carbon Features
Here are some screenshots:
Carbon Screenshots
Carbon Updates
Join us on these Social Media Channels to keep yourself up-to-date on all the latest Carbon news, updates, contests, and more! Join our completely open Google+ community for insider conversation with devs and other users.
Download Carbon
All Carbon downloads and further information such as features, changelog, and FAQ can be found on our website.
Carbon Downloads
Changelog
For a detailed changelog, check out the changes made each night here:
Carbon Changelog
Support
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Ask a question on our IRC channel. Connect to #teamcarbon on irc.freenode.net or click here. You'll find several other Carbon fans and usually one or more devs as well. Please be polite.
Who is Team Carbon?
Find out here:
Carbon Team
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
[ROM][AOSP][Nightly/Release] CarbonROM KitKat [jflte/i9500], ROM for the Samsung Galaxy S 4
Contributors
CarbonDev, NBruderman
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-02-04
Last Updated 2014-07-25
Reserved
Reserved
For me
reserved
Also reserved
KK Thread...
Enjoy you all.
You want to say (Jfltexx) S4 I9505 not (hltexx) Note3 9005..
mabmed said:
Wrong forum! here for S4 I9505 not for Note3 9005..
Click to expand...
Click to collapse
no, its not wrong just copy / paste
hltexx?
jfltexx ?
NotaHue said:
jfltexx ?
Click to expand...
Click to collapse
now is okey ?
Upgraded without wipe, working fine. Had issue with Calendar not seeing Google Calendars. Had to remove them and refresh gapps.
Good job guys, Chrome is really responsive. Missing PIE though.
Sent from my GT-I9505 using Tapatalk
---------- Post added at 12:54 AM ---------- Previous post was at 12:48 AM ----------
Does anyone else experience a FC when selecting Mobile Networks?
Sent from my GT-I9505 using Tapatalk
I had 3 problems after flashing this rom. First, the keyboard freezes and sticks on the screen when swiping. A temporary resolution was to uninstall the stock keyboard and download the Google keyboard from the play store. Second, sometimes the phone enters sleep mode and it doesn't turn back on. The menu and back keys light up when I try to turn the screen on but the screen stays blank. Third, the gallery shows blank content a few seconds after using it. Please look into these problems!
kevin95 said:
First, the keyboard freezes and sticks on the screen when swiping. A temporary resolution was to uninstall the stock keyboard and download the Google keyboard from the play store.
Click to expand...
Click to collapse
Its the gapps youre using thats causing this. Had the same issues on my unofficial Carbon kk.
kevin95 said:
I had 3 problems after flashing this rom. First, the keyboard freezes and sticks on the screen when swiping. A temporary resolution was to uninstall the stock keyboard and download the Google keyboard from the play store. Second, sometimes the phone enters sleep mode and it doesn't turn back on. The menu and back keys light up when I try to turn the screen on but the screen stays blank. Third, the gallery shows blank content a few seconds after using it. Please look into these problems!
Click to expand...
Click to collapse
As was mentioned: gapps are probably to blame. If you're not using PA Gapps you should try those - mini modular package for example.
http://forum.xda-developers.com/showthread.php?t=2397942
Second problem I haven't noticed - are you on stock kernel? I am using Alucard's as KT's is giving me problems with min/max values not sticking and getting stuck at a very low frequency on Carbon. Has great functionality like USB mass storage mode.
http://forum.xda-developers.com/showthread.php?t=2590246
Third problem not happening here either. You could try using Quickpic as an alternative, though. Best gallery available in my opinion.
Maybe try a clean flash with pa gapps and alucard kernel. That setup works like a charm for me.
nazfalas said:
As was mentioned: gapps are probably to blame. If you're not using PA Gapps you should try those - mini modular package for example.
http://forum.xda-developers.com/showthread.php?t=2397942
Second problem I haven't noticed - are you on stock kernel? I am using Alucard's as KT's is giving me problems with min/max values not sticking and getting stuck at a very low frequency on Carbon. Has great functionality like USB mass storage mode.
http://forum.xda-developers.com/showthread.php?t=2590246
Third problem not happening here either. You could try using Quickpic as an alternative, though. Best gallery available in my opinion.
Maybe try a clean flash with pa gapps and alucard kernel. That setup works like a charm for me.
Click to expand...
Click to collapse
I'm using stock kernel. I'm gonna try using the suggested gapps to see if everything will be resolved.
I also noticed the "adjust brightness using status bar" feature isn't on this rom. Will this be implemented any time soon?
kevin95 said:
I'm using stock kernel. I'm gonna try using the suggested gapps to see if everything will be resolved.
I also noticed the "adjust brightness using status bar" feature isn't on this rom. Will this be implemented any time soon?
Click to expand...
Click to collapse
First Nightly and asking Features? Please patience.
TapaTaLked...
awsome Rom
Been using Carbon Rom for a long time. This one is GREAT as usual.
Thank you for all the hard work.
Amazing rom. No issues at all so far which isn't to bad for an early nightly! Regarding GAPPS, I use the one from Broodplank's thread. Works perfectly.
http://forum.xda-developers.com/showthread.php?t=2397511
teethgrinder32 said:
Amazing rom. No issues at all so far which isn't to bad for an early nightly! Regarding GAPPS, I use the one from Broodplank's thread. Works perfectly.
http://forum.xda-developers.com/showthread.php?t=2397511
Click to expand...
Click to collapse
I advice PA 0-day gapps.
Warning! Please read before flashing!
Hi everyone, I wanted to test a rom for your device just to challenge myself so I built PA 4.4.4, I do not own the P970, and have not Idea if it even boots or flashes, any bricking or damage caused to your phone is your fault alone.
Instructions:
1. Full wipe
2. Flash ROM
3. Flash Gapps either micro or nano
4. reboot
5. Enjoy
What's working
Everything(?)
What's NOT working
You tell me (comments or PM)
Download:
ROM
PA GAPPS
Source
Device
Kernel
Updates
30/10: Fixed mobile data thanks to washbeer and nameless ROM team
28/10: Fixed boot/network/sound issues in build (I hope), switched vendor files to @Jelixis Repo's
27/10: Fixed flash issue thank to @washbeer
Credits: rac00n from github, its his device sources, all the PA dev team its, their rom.
If someone could post some screenshots, that would be great, or a video If it boots that is.
XDA:DevDB Information
[UNOFFICIAL][ROM] [4.4.4] [P970]ParanoidAndroid [10/30], ROM for the LG Optimus Black
Contributors
sooti, washbeer, Evisceration, dhiru1602
ROM OS Version: 4.4.x KitKat
Based On: AOSP
Version Information
Status: Testing
Created 2014-10-21
Last Updated 2014-10-30
sooti said:
Warning! Please read before flashing!
Hi everyone, I wanted to test a rom for your device just to challenge myself so I built PA 4.4.4, I do not own the P970, and have not Idea if it even boots or flashes, any bricking or damage caused to your phone is your fault alone.
Instructions:
1. Full wipe
2. Flash ROM
3. Flash Gapps either micro or nano
4. reboot
5. Enjoy
Download:
ROM
PA GAPPS
Source
Device
Kernel
Credits: rac00n from github, its his device sources, all the PA dev team its, their rom.
If someone could post some screenshots, that would be great, or a video If it boots that is.
XDA:DevDB Information
[UNOFFICIAL][ROM] [4.4.4] [P970]ParanoidAndroid [10/21], ROM for the LG Optimus Black
Contributors
sooti
ROM OS Version: 4.4.x KitKat
Based On: AOSP
Version Information
Status: Testing
Created 2014-10-21
Last Updated 2014-10-21
Click to expand...
Click to collapse
hello,
won't install (error 7)
thanks anyway. could you see what's happening?
nice, let me know if you need some help.
also thank mainly Evisceration and dhiru1602, they did a ton of work for this device
ptxpaulo said:
hello,
won't install (error 7)
thanks anyway. could you see what's happening?
Click to expand...
Click to collapse
OK, washbeer helped me out, compiling new one, should fix the issue
OK, I think I fixed it, new fixed ROM will be uploaded within 2 hours, please flash it and post screenshots ASAP if it works
sooti said:
OK, I think I fixed it, new fixed ROM will be uploaded within 2 hours, please flash it and post screenshots ASAP if it works
Click to expand...
Click to collapse
Any news? Sorry to ask but I'm waiting since you anounced upload...
ptxpaulo said:
Any news? Sorry to ask but I'm waiting since you anounced upload...
Click to expand...
Click to collapse
Seems like we have another build error, I'll have to look into it again, don't know why... sorry
sooti said:
Seems like we have another build error, I'll have to look into it again, don't know why... sorry
Click to expand...
Click to collapse
ok, thanks
ptxpaulo said:
ok, thanks
Click to expand...
Click to collapse
OK I believe I fixed it thanks to washbeer
New link
EDIT: Could someone post some screenshots? or at least say if this works? if so ill build you guys some more roms
sooti said:
OK I believe I fixed it thanks to washbeer
New link
EDIT: Could someone post some screenshots? or at least say if this works? if so ill build you guys some more roms
Click to expand...
Click to collapse
hmm looks like it bootloops. scumbag mediaserver
edit: well i got it booting.
i simply deleted all audio libs from the zip in /system/lib/hw.
so yes, it's alive but without sound.
what works:
*bluetooth
*wifi
*camera
*automatic brightness
not working:
*audio
*mobile network
some screens attached
edit2: looks like the vendor tree was outdated, sooti is taking care of it
washbeer said:
hmm looks like it bootloops. scumbag mediaserver
edit: well i got it booting.
i simply deleted all audio libs from the zip in /system/lib/hw.
so yes, it's alive but without sound.
what works:
*bluetooth
*wifi
*camera
*automatic brightness
not working:
*audio
*mobile network
some screens attached
Click to expand...
Click to collapse
glad to hear it works, any idea why no mobile network?
EDIT: I think I found the issue,
Uploading new build now, should fix sound and network issue
Gah! You beat me to it. XD I was porting PA too XD good luck and cheers on the new rom! Looking forward to working with you on the near future
well....
ROM boots after 1 hour...
No sd card (maybe hardware problem has I have mixed with my phone hardware because of hardware buttons don't work).
Now I can't reboot into recovery nor having sd card).
But I can tell that it boots (hardly). and it works .
Keep trying
Cheers
Jelixis said:
Gah! You beat me to it. XD I was porting PA too XD good luck and cheers on the new rom! Looking forward to working with you on the near future
Click to expand...
Click to collapse
talk to me in private, we are trying to get data to work and can't
ptxpaulo said:
well....
ROM boots after 1 hour...
No sd card (maybe hardware problem has I have mixed with my phone hardware because of hardware buttons don't work).
Now I can't reboot into recovery nor having sd card).
But I can tell that it boots (hardly). and it works .
Keep trying
Cheers
Click to expand...
Click to collapse
Strange.. are you sure you flashed correctly? full wipe? others said everything works smooth except the data (3G/2G)
sooti said:
talk to me in private, we are trying to get data to work and can't
Strange.. are you sure you flashed correctly? full wipe? others said everything works smooth except the data (3G/2G)
Click to expand...
Click to collapse
Aeroi is in the same boat, no data. I'm looking for commits on the Nameless gerrit cause it seems to be working there.
Jelixis said:
Aeroi is in the same boat, no data. I'm looking for commits on the Nameless gerrit cause it seems to be working there.
Click to expand...
Click to collapse
Mobile data is fixed, pm
washbeer said:
Mobile data is fixed, pm
Click to expand...
Click to collapse
Thank you saw it, building fixed (hopefuly) build now, I will post a link when its done
EDIT: link is up in the first page, please let me know if it all works
BUG's & FC's
- Hey guys thanks for the work that you're doing for the old LG Optimus Black. I ported the rom on my Korean OB Lg KU5900. I flashed KU5900_V30I_00_CP.fls together with [PATCHED]V20B using Smart flash tool to make it P970 and have the Open Recovery. It's amazing because it works. However, I just noticed that the rom is a little bit laggy even no apps have been installed yet. It became more laggy when I installed my other apps. By the way, we're hoping that you'll fix it especially the memory management of the rom coz the phone is only 512MB of ram. Keep it up and waiting for your further developments. Thanks a lot!^^
what works:
*bluetooth
*wifi
*camera [Only in taking pictures]
*automatic brightness
*audio
*mobile network
working but with bugs:
*CAMCORDER's Audio and Video were not synchronize. There's a delay on movements.
*The ROM lags a lot while gaming and sometimes black screen occurs while you're browsing. You have to remove and re-attach the battery to turn back on.
FC's
*Kernel Tweaker always not responding
*Incompatible on some apps
Nice ROM)
SeeSpike Laboratory - Metallium
ABOUT Spike Laboratory - Metallium
Spike Laboratory - Metallium >>SPLM is an after market firmware based latest "Android Lolli-Pop 5.X.X. This firmware is designed By Spike Laboratory .This firmware suits specially for those people who like,Multitasking performance,optimum speed. In-addition to This the firmware has Inbuilt options and settings to make customization of your Device the way you like.
Features , changelogs and screenshots can be found on Spike Laboratory - WEB
SUPPORT FOR SPLM RELATED ISSUES :
We spend an astonishing amount of time developing this firmware. We can't spend much time on XDA as a result, so if you need support, please try the following:
Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has addressed it already. Especially if you're even close to new at this.
Ask a question in your device forum either in xda . Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
DOWNLOAD LINKS:
SPLM ROM AND RECOMMENDED GAPPS
SPLM ROM for LG G2-d802
(Please do not mirror Download links or Mention Link in any of your posts )
INSTALLATION STEPS:
Minimum Requirements To Install SPLM:
Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
You must be on the LP bootstack here
Recommended Custom Recovery TWRP : Click Here to View TWRP Offical supported devices
Installation Procedure:
(A)If you are making a Fresh Installation(or Coming from any other rom other than SPLM) :
Boot Into Recovery Mode
Wipe Data,System,Cache,Dalvik
Flash provide latest SPLM ROM Zip
Again Wipe Cache and Dalvik
Reboot To System
Now again Reboot into Recovery Mode
Flash latest G-Apps
Wipe Cache and Dalvik....and Reboot To System.
(B)If you are already Running SPLM Rom But You want to Update with latest Version:
Boot Into Recovery Mode
Flash provided Updates of SPLM ROM(latest weekly)
Again Wipe Cache and Dalvik
Reboot To System.
SOURCE:
SPLM ROM complete source
Kernel sources
OFFICIAL LINKS & INFORMATIONS :
Official Web-Page
WHO IS TEAM SPIKE LABORATORY?:
TEAM SPIKE LABORATORY
Every donation you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make SPLM better with every release. Your support means the world to us! If you've enjoyed SPLM Rom, please consider contributing or donating so we can achieve our goal.Please Don't hesitate to hit the THANKS button.Thank you, and we hope you continue to enjoy SPLM Roms!
http://forum.xda-developers.com/donatetome.php?u=4758315
XDA:DevDB Information
Metallium OS, ROM for the LG G2
Contributors
Schneiderle, Mardon
Source Code: https://github.com/Metallium-ROM
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-09-09
Created 2015-08-18
Last Updated 2015-09-10
Reserved
Reserved
Screenshots and links?
serhangelgor said:
Screenshots and links?
Click to expand...
Click to collapse
See post 1.
I tried it!
Rock solid, surprised.
Only one thing, Settings/Buttons was completely empty/white.
If you could add volume steps it would be great!
Screenshots are kinda pointless, all these 5.1.1 ROM loook the same.
Is this 5.1.1 r10?
FYI, OpenGApps Pico package (44MB) flashed fine.
I installed this ROM, this rom is smooth like others.
you need lp bootstack before installing this rom (I was on stock RR before this, so only wiped and directly flashed this rom)
DT2W is not working for me, it is ON in the setting but still its not working
I also tried "echo 1 >/sys/devices/virtual/input/lge_touch/firmware" but no luck.
other than this no other problems for now
Thanks dev for this ROM :good:
Edit 1: This rom is close to stock (nexus like) rom, you will not find any extra settings like blispop or rr
I am not quite getting it...
Is this ROM a genuinely new ROM or an boosted version of CM12.1?
Sent from my LG-D802 using XDA Forums Pro.
sameerm02 said:
I installed this ROM, this rom is smooth like others.
you need lp bootstack before installing this rom (I was on stock RR before this, so only wiped and directly flashed this rom)
DT2W is not working for me, it is ON in the setting but still its not working
I also tried "echo 1 >/sys/devices/virtual/input/lge_touch/firmware" but no luck.
other than this no other problems for now
Thanks dev for this ROM :good:
Click to expand...
Click to collapse
Strange, worked fine for me.
I turned it on with Kernel Adiutor, try that?
Set on enabled, set "On boot" and leave it. Even if you see it showing disabled next time you check Kernel Adiutor, don't change anything since it's activated.
The rom is fast and smooth.
However,its base is old.
It is based on LVY48C,while other AOSP roms are based on LVY48G
WORF84 said:
Strange, worked fine for me.
I turned it on with Kernel Adiutor, try that?
Set on enabled, set "On boot" and leave it. Even if you see it showing disabled next time you check Kernel Adiutor, don't change anything since it's activated.
Click to expand...
Click to collapse
yes, kernel aduitor is the solution for d2tw
Hello I am the team leader, i would like to say this a initial build as @Schneiderle is a new dev , and he is still learning as we are , this rom was made before we pushed any customizations.This rom will be completely diffrent and we hope independent as some others are.If you have any suggestions about further improvments features either pm me or make pull requests.
Also i am sorry that the web was down , now you can all access it.
Enjoy and thanks for positive support.
@Buda1996
Is it possible to add RRO support to your ROM?
Sent from my LG-D802 using XDA Free mobile app
LidaFlorida said:
@Buda1996
Is it possible to add RRO support to your ROM?
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
Stop it. You have a blazing fast RRO rom,and it is SlimSaber.
Now let us have a blazing fast CM Theme Engine rom.
On this metallim os could we have some choice for scheduler(zen fiops) and for the governor(like smartmax and nightmare)?
It's also possible have low level code optimization like O-3 graphite floop strickt aliasing and other?
Anyway this first release is very good
Thank you for the feedback but as i sayd we are planing on making a own UI as by that we will have to adjust theme manager to the actual UI or themeres will have to adjust their themes.
I'd love to see some screens of the ROM. I cant find any of them here or in your web.
Thanks !
tomirodriguez said:
I'd love to see some screens of the ROM. I cant find any of them here or in your web.
Thanks !
Click to expand...
Click to collapse
here, but ui is still wip
GUYS new build is up got download it at http://home.spikelaboratory.com/metallium go to devices section and download your rom zip and enjoy .
Thanks for the support.Here its amazing.
Buda1996 said:
GUYS new build is up got download it at http://home.spikelaboratory.com/metallium go to devices section and download your rom zip and enjoy .
Thanks for the support.Here its amazing.
Click to expand...
Click to collapse
I downloaded and I'll try it today.
I can't find the change log anywhere on the site. Can you please point to it?
Hello there!
As you all know MIUI is a highly customizable ROM with an eye pleasing UI. I am here very happy to present for you the new MIUI 7 ROM for your OSPREY. I tried to make it boot. but even then lots of bugs may have crept in. So, I request the users to report the bugs here and help me in fixing them as I don't own this device and I will try to solve that in the next build.
Features
-------------------------------------------------------------------------------------------------
All MIUI 7 features including Notification Light settings, more Camera features like image filters, face detection, age & gender etc.
------------------------------------------------------------------------------------------------
Since it is itself a Alpha Port, it may have such bugs whiich can't be easily solved!
Finally there's a possibility for the eye-popping MIUI for Moto G 2015-osprey..
So Testers time to download rom and test it...If possible try fixing Bugs
-Added on 29/10/16
_Miui 7 based on 5.1.1
-based on stock moto rom
-Audio should work-test and report
-Booting build
Anyone can download this rom and continue bug fixing and if they succeed they can make their own thread of that rom!!
Download Link:http://d-h.st/ivW9
Link:- -MIUI-8-LINK-REMOVED-becuse-settings-FC
How to Install
-------------------------------------------------------------------------------------------------------------------------------
Download the MIUI ROM
Reboot into TWRP Recovery
Wipe data, system, cache and dalvik cache from Advanced Wipe menu
Flash the MIUI ROM
Then reboot your phone. The first boot may take up to 15~20 minutes and then u will be in setup wizard
Awesome,now we have a booting miui 7 -based on lollipop 5.1.1 ,thanks to @TestXenLuu for providing screenshots
What works
Boots
Storage
*maybe more
Bugs/what doesn't work:
Ril
Audio
Camera
Wifi
*maybe more
I hope some of you will come forward and help me in fixing bugs....
As I don't own this device I can't do much !
If you own this device you can flash this ROM and try fixing bugs by googling or by any other way.
I hope you successfully fix all the bugs....
I possible try to to give me logs
Now,don't ask me how to take logs Google it and give me logs I'll try to trace bug fixes!
Screenshots link:-
https://drive.google.com/drive/mobile/folders/0BytM-dsHWhj3NjB1NDJfRFNweHM?usp=drive_web
Thanks!
Credits(not in any order)
Huge thanks to MIUI Team for providing us the beautiful MIUI ROM.
Also a huge thanks to @ziwo for being my inspiration
Thanks to XDA forum members who apparently helped me in this project
Thanks to @TestXenLuu for testing ROM and providing screenshots
Thanks to @nitesh9 for making porting guide(osbusters)
Contributors
Innfinite4evr
ROM OS Version: Miui-V7 ,5.1.1 Lollipop
Required: TWRP-3.0.x, Unlocked bootloader
Version Information
Status: Alpha
Created 2016-10-22
Last Updated 2016-10-23
Reserved
Some tips for your MIUI v7 ROM
---------------------------------------------------------------------------------------
Turn off sync when not required since it drains much battery.
-------------------------------------------------------------------------------------------------------------------------------------------------
Auto brightness is calibrated somewhat low so increase the brightness slider according to your preference.
--------------------------------------------------------------------------------------------------------------------------------------------------
Give Autostart permissions to Kernel Adiutor and Color Control (if you are using it)
--------------------------------------------------------------------------------------------------------------------------------------------------------
It is pure MIUI so be careful while you flash anything or edit the build.prop
---------------------------------------------------------------------------------------------------------------------------------------------------------
Never update through OTA even if it shows available update since the update is meant only for redmi 2 prime device. Disable auto update in Updater app. Downloading and installing an OTA update will BRICK your phone.
------------------------------------------------------------------------------------------------------------------------------
Bug Fixes:
-----------------------------------------------
Yet to come
Very good work friend. I am here to help with testing and development, you can be sure that with the corrections, this will be my rom for daily use.
Nice work bro. Hope you make more new ROMs through the guide.
Cool.. bro
Sent from my MotoG3 using XDA-Developers mobile app
u r the real MVP
i tried it and its cool and everything but for now is unusable as a daily driver. btw what base did you use for the rom?cause cyanogen will give you more rejects and bugs i heard
bluedragon12 said:
i tried it and its cool and everything but for now is unusable as a daily driver. btw what base did you use for the rom?cause cyanogen will give you more rejects and bugs i heard
Click to expand...
Click to collapse
this is not based on miui patchrom it is a port and based on lollipop stockrom
miui on moto g 3rd generation
brother, installed here does not take long, however nothing works! has as not enter the settings, the sim card does not work nothing works! but it was the intention.
I look forward to improvements to try to install again. :Boa:
ummm its miui 8 bro a lil typo
scala_ said:
fukcing trash rom. nothing works noob. cant even connect to data.
0/10
Click to expand...
Click to collapse
Then do better... 1st of all you should be happy to be able to use MIUI for FREE on your osprey, 2nd the "trash" that you flashed probably took loads of time from the developer's part and still is on ALPHA stage, and this kind of comment that you just puked doesn't help or motivate the developer on improving the ROM. Just GTFO and grow up you self centered ****.
scala_ said:
fukcing trash rom. nothing works noob. cant even connect to data.
0/10
Click to expand...
Click to collapse
get lost. no one claimed it was working. and no one invited you.
So it's miui 8 not 7... amazing. Thank you man...i can't try it because osprey is my Daily driver...but when it Will be stable it Will be my Daily rom [emoji2] [emoji106]
scala_ said:
fukcing trash rom. nothing works noob. cant even connect to data.
0/10
Click to expand...
Click to collapse
excuse my language but r your eyeballs in your butt hole used as a*** beads?
did u even bother to READ the OP ?
have u ever tired porting a rom ?
the developers work for FREE for HOURS
if u cannot appreciate the work then move your ass somewhere else or make rom yourself
@Innfinite4evr where is the link of alpha 2 as there is changelog of it? there is only alpha 1 link. What about alpha 2? Is it released?
sagar27691 said:
@Innfinite4evr where is the link of alpha 2 as there is changelog of it? there is only alpha 1 link. What about alpha 2? Is it released?
Click to expand...
Click to collapse
look carefully ..
now i highlighted link
flashing... editing this post after boots up
UPDATE: DOESN'T BOOT (osprey x1541 1gb ram)
Innfinite4evr said:
look carefully ..
now i highlighted link
Click to expand...
Click to collapse
Doesn't boot
sagar27691 said:
Doesn't boot
Click to expand...
Click to collapse
Phuck,One more person confirm this to me
Yes, Doesn't boot
WARNING: THIS IS UNOFFICAL BUILD, USE IT AS YOUR OWN RISK.
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
OrangeFox R12.1 build Support ROMs which using FBE_V2 only, for example: Lineage OS 19.1/20 by @clfbbn.
About FBE_V2, see Google's documents please: https://source.android.com/docs/security/features/encryption/file-based
If you're using ROM with FBE_V1, you should use the recovery which support FBE_V1 to make data decryption works well.
OrangeFox R10.0 build Support ROMs which using FBE_V1 only
for example: Lineage OS 17.1 by @Sjll , sony stock Android 10/11
INSTALLATION:
First, reboot your phone to bootloader and connect your phone with PC.
Then type in your terminal(like CMD, powershell and so on):
Code:
fastboot flash recovery <the-file-name-of-recovery-image>
If you wanna reboot to recovery now, type:
Code:
fastboot reboot recovery
Okay, you can enjoy it imperfect UNOFFICAL recovery now
WORKS:
Decryption (R12.1 build only work on FBE_V2 ROMs, R10.0 build only work on FBE_V1 ROMs)
Fastbootd
Adb sideload
Flash zip file(You can use it flash @clfbbn's Lineage OS).
Touchscreen.
Vibration (It has been fixed on OrangeFox R12.1 230221 builds)
NOT WORKS:
Vibration (Sorry, I am a real noob, ask our pro plus ultra dev bootloopuru who build TWRP without ANY XPERIA device to solve it xD)
Decryption on Sony Xperia Stock Android 12 ROM (I am not sure about the reason: maybe TWRP branch 12.1 only support FBE_V2 decryption for device which using Android 12+ ROM with FBE? )
Some strange layout (I don't want to do anything about it for now, because OrangeFox's UI is not compatible with our 21:9 long screen）
Vibration has been fixed on R12.1 branch after 230221 builds, thanks to @sekaiacg.
Layout has been fixed after 230215 builds, sorry for OrangeFox team, I am noob, I forget to set OF_SCREEN_H values.
I am sorry for my blame and my noob jobs.
OTG (Okay, I will try to fix it if I have enough time.)
Credits
* TeamWin - for TWRP
* The OrangeFox Team - for your hard work
* All our testers - for your patience and help
* clfbbn - for his kernel source
* sekaiacg - for his twrp device tree for umi
* cramfs28 - for his help
* lolipuru - Okay, he got a real Xperia 5 II and fix many issues now, I really thank to him, but I still hate someguy build rom/recovery without devices.
Downloads:
Please download the LATEST build for the branch you need to use (R10.0 or R12.1).
My noob project in sourceforge, flash it as your own risk: https://sourceforge.net/projects/homosenpai/files/Recovery/OrangeFox/
Device Tree:
GitHub - ShirokaneShizuku/twrp_device_sony_sm8250
Contribute to ShirokaneShizuku/twrp_device_sony_sm8250 development by creating an account on GitHub.
github.com
(Actually who care about it lol, The open source community is getting worse, some pro guys even build ROM for the device they don't have, haha)
Bug Report:
Please report it wit log please, and because this is a noob UNOFFICAL build, I can't fix bugs as soon as possible, thanks for your understand.
Donation:
Hey guys,Why would you donate to someone who hasn't contributed to the open source community?
1. Why you keep repeating that this is an UNOFFICAL build？
Because some bad guy thinks my previous releases are pretending to be an official build (actually I put UNOFFICAL tag in the title every time)
2. Hey guys, can you help me compile a ROM or Recovery for a XXX device?
NO, absolutely NOT, I would not do such a thing. All released builds should be rigorously tested by developers, at least to ensure that the basic functions are effective, which is the basic guideline of the open source community.
I'm not an unprincipled and no bottom line guy like lolipuru, if you want bootloop go for that guy, they're good for nothing but messing with the community
3. Hey man why are you so aggressive can you calm down？
Sorry I may seem grumpy, but I can't stand someone taking something from the open source community and doing it badly irresponsibly
4. What can I do if I am using FBE_V1 ROMs ?
Please use OrangeFox-R10.0-Unofficial-pdx203-230217.img.
5. When I use OrangeFox-R10.0 on Android 11 ROMs, I got some error about APEX, what can I do?
I am sorry for that, but please ignore it now, or wait for the OrangeFox 11.0 builds.
6. Why you don't build OrangeFox-R11.0 for Xperia 1 II ?
I am sorry about it, I face some strange issue: like decryption dead or touchscreen not work, I need time to figure out about it, as you see, I am noob here QwQ.
7. Hey, why not you build TWRP bro?
I am tired, I don't wanna sync source again now. If I have enough time, I will build it.
Update Log:
2023-02-15:
Fix strange layout, sorry for OrangeFox Team, I am very sorry for that QwQ
2023-02-17:
Fix strange layout for OrangeFox R10.0 build (which build for FBE_V1) and release it now.
2023-02-21
Fix vibration for OrangeFox R12.1 build, thanks to @sekaiacg and TWRP Teams. (Our device should use QTI AIDL for haptic)
Thanks for making the recovery, and after some update it's became very good. Also waiting for your derpfest update
leomate said:
Thanks for making the recovery, and after some update it's became very good. Also waiting for your derpfest update
Click to expand...
Click to collapse
You're welcome bro, but I will not update derpfest build because I am busy until July this year.
Absolutely I can build it, it only take my PC's 3 hours, but I need to test and debug it (basicly I need to make sure it's bootable), I will not release ANY build that have not been tested.
No matter what, thanks for your appericate
RealNoobKanger said:
You're welcome bro, but I will not update derpfest build because I am busy until July this year.
Absolutely I can build it, it only take my PC's 3 hours, but I need to test and debug it (basicly I need to make sure it's bootable), I will not release ANY build that have not been tested.
No matter what, thanks for your appericate
Click to expand...
Click to collapse
Ahh that's okay. I just feel when this recovery saving me from the hassle. That's what I'm using from my old phone.
As long the ROM stable enough for me (no memory leak like stock rom) its good, and the 3-finger screenshot feature that I'm miss a lot when switch to Xperia phone. It's rare to see a flagship SOC with microSD slot.
Anyway, thanks for once again for the effort making Recovery :3
leomate said:
Ahh that's okay. I just feel when this recovery saving me from the hassle. That's what I'm using from my old phone.
As long the ROM stable enough for me (no memory leak like stock rom) its good, and the 3-finger screenshot feature that I'm miss a lot when switch to Xperia phone. It's rare to see a flagship SOC with microSD slot.
Anyway, thanks for once again for the effort making Recovery :3
Click to expand...
Click to collapse
Vibration should be fixed on 230221 R12.1 build, enjoy it!
Is there no hope for decrypting stock 12? What kind of bullcrap did Sony pull off with it
Xspeed said:
Is there no hope for decrypting stock 12? What kind of bullcrap did Sony pull off with it
Click to expand...
Click to collapse
TWRP's decryption might be work now on Xperia stock Android 12, refer to it:https://github.com/TeamWin/android_bootable_recovery/commit/9ab7cf500595c9809142c3294ca477fcedf7e56d
Looked promising, I compiled the recovery with this new change, but unfortunately still no dice, same errors in logs as before
Xspeed said:
Looked promising, I compiled the recovery with this new change, but unfortunately still no dice, same errors in logs as before
Click to expand...
Click to collapse
Do you change the fstab? Maybe you need to change it to adapt to Stock Android 12
Xspeed said:
Looked promising, I compiled the recovery with this new change, but unfortunately still no dice, same errors in logs as before
Click to expand...
Click to collapse
Do you using Xperia Stock android 12 bro? I am using MIUI for Xperia 1 II now, I don't wanna flash to Stock android 12 again (backup take too many time for me)
If you wanna try to decrypt Stock android 12, you can change the mount flags about data and Metadata, make sure it same with Stock ROM
RealNoobKanger said:
1. Why you keep repeating that this is an UNOFFICAL build？
Because some bad guy thinks my previous releases are pretending to be an official build (actually I put UNOFFICAL tag in the title every time)
2. Hey guys, can you help me compile a ROM or Recovery for a XXX device?
NO, absolutely NOT, I would not do such a thing. All released builds should be rigorously tested by developers, at least to ensure that the basic functions are effective, which is the basic guideline of the open source community.
I'm not an unprincipled and no bottom line guy like lolipuru, if you want bootloop go for that guy, they're good for nothing but messing with the community
3. Hey man why are you so aggressive can you calm down？
Sorry I may seem grumpy, but I can't stand someone taking something from the open source community and doing it badly irresponsibly
4. What can I do if I am using FBE_V1 ROMs ?
Please use OrangeFox-R10.0-Unofficial-pdx203-230217.img.
5. When I use OrangeFox-R10.0 on Android 11 ROMs, I got some error about APEX, what can I do?
I am sorry for that, but please ignore it now, or wait for the OrangeFox 11.0 builds.
6. Why you don't build OrangeFox-R11.0 for Xperia 1 II ?
I am sorry about it, I face some strange issue: like decryption dead or touchscreen not work, I need time to figure out about it, as you see, I am noob here QwQ.
7. Hey, why not you build TWRP bro?
I am tired, I don't wanna sync source again now. If I have enough time, I will build it.
Click to expand...
Click to collapse
我想知道这可不可以在中国版本上使用？
I want to know if this can be used on the Chinese version?
I have sony xperia 1 ii au version. I have unlocked bootloader and downloaded europe rom from sony xperfirm and installed it now I’m getting no sim card emergency only. How to solve this please help me