Hi,
Why VoLTE only works in Oxygen OS ? Why not in other custom OS ?
Many times I flashed my op3 for voLTE but no luck. I tried LineageOS, Mokee, etc etc but no luck.
At last I got it working and How ? please read below.
I know you must be thinking of whether this trick will work or not or is it fake .
Now you can really add VoLTE on your oneplus 3/T ()
Steps To Follow
1. At first install official Oxygen OS 9.0.6
(Remember it will replace your twrp recovery to official Oxygen recovery )
2. Reboot and see if you have VoLTE
Then,
Reboot to Fastboot mode your device.
3. Type "fastboot boot twrp_recovery.img "
4. now wipe all partitions except internal, recovery.
5. Install "Lineage OS / custom os "
6. Reboot.
and check by calling if your VoLTE working or not.
Thanks,
(Do report here if its working or not.)
evadon said:
Hi,
Why VoLTE only works in Oxygen OS ? Why not in other custom OS ?
Many times I flashed my op3 for voLTE but no luck. I tried LineageOS, Mokee, etc etc but no luck.
At last I got it working and How ? please read below.
I know you must be thinking of whether this trick will work or not or is it fake .
Now you can really add VoLTE on your oneplus 3/T ()
Steps To Follow
1. At first install official Oxygen OS 9.0.6
(Remember it will replace your twrp recovery to official Oxygen recovery )
2. Reboot and see if you have VoLTE
Then,
Reboot to Fastboot mode your device.
3. Type "fastboot boot twrp_recovery.img "
4. now wipe all partitions except internal, recovery.
5. Install "Lineage OS / custom os "
6. Reboot.
and check by calling if your VoLTE working or not.
Thanks,
(Do report here if its working or not.)
Click to expand...
Click to collapse
Sir after installing oos it automatically instal oos recovery so how can we boot to twrp without instal twrp but u mentioned step 3 boot to twrp
Or it fastboot flash recovery recovery.img
deepak3048 said:
Sir after installing oos it automatically instal oos recovery so how can we boot to twrp without install twrp but u mentioned step 3 boot to twrp
Or it fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Read correctly bro. First install OOS , it will install recovery too as well as firmware. and boot to TWRP via this command
"fastboot boot twrp.img" NOT "fastboot flash " ok.
After that format system,cache,dalvik in TWRP. and install your lineage os file.
And reboot system.
Done.
I am using Lineage OS 17 in OP3/t with working VOLTE in jio.
Try as it is all steps.
evadon said:
Read correctly bro. First install OOS , it will install recovery too as well as firmware. and boot to TWRP via this command
"fastboot boot twrp.img" NOT "fastboot flash " ok.
After that format system,cache,dalvik in TWRP. and install your lineage os file.
And reboot system.
Done.
I am using Lineage OS 17 in OP3/t with working VOLTE in jio.
Try as it is all steps.
Click to expand...
Click to collapse
Thanks bro but have u try airtel and 8s your device op3 or 3t
deepak3048 said:
Thanks bro but have u try airtel and 8s your device op3 or 3t
Click to expand...
Click to collapse
It will work on airtel too. I have op3t and op3 both working.
deepak3048 said:
Sir after installing oos it automatically instal oos recovery so how can we boot to twrp without instal twrp but u mentioned step 3 boot to twrp
Or it fastboot flash recovery recovery.img
Click to expand...
Click to collapse
You can boot into TWRP without installing it. The trick is to open the command prompt (adb) in the folder where the TWRP image is stored in your PC. Or, move the TWRP image to your adb tools folder and open the command prompt there. Then proceed as the OP says.
evadon said:
It will work on airtel too. I have op3t and op3 both working.
Click to expand...
Click to collapse
Problem is with VoOLTE for Airtel. Jio works without any issues even you follow the any guide guides to install LOS
Sorry I don't have airtel , may you please try and report here so that other peoples could get a clarity of working volte with Airtel.
Muralidharc22 said:
Problem is with VoOLTE for Airtel. Jio works without any issues even you follow the any guide guides to install LOS
Click to expand...
Click to collapse
But the normal installation of lineage never worked for me for VoLTE atleast jio.
evadon said:
Sorry I don't have airtel , may you please try and report here so that other peoples could get a clarity of working volte with Airtel.
Click to expand...
Click to collapse
I am already on LOS 17.1 with no VOLTE and poor signal strength on LTE.
Reported on gitlab
https://gitlab.com/LineageOS/issues/android/-/issues/1811
Muralidharc22 said:
I am already on LOS 17.1 with no VOLTE and poor signal strength on LTE.
Reported on gitlab
https://gitlab.com/LineageOS/issues/android/-/issues/1811
Click to expand...
Click to collapse
You already on Lineage 17 is different than what I am talking about. Have you tried the method I Posted above in topic. No ?
Why I am telling to follow the same steps because VoLTE is all about a little tweak which happens in efs partitions I think. So when we install and first start the OOS it changes something in recovery level in efs/recovery.
When we install other os without formatting recovery and efs , VoLTE actually works. ( only if volte working in OOS then it will work in lineage via this method )
That's it.
evadon said:
You already on Lineage 17 is different than what I am talking about. Have you tried the method I Posted above in topic. No ?
Why I am telling to follow the same steps because VoLTE is all about a little tweak which happens in efs partitions I think. So when we install and first start the OOS it changes something in recovery level in efs/recovery.
When we install other os without formatting recovery and efs , VoLTE actually works. ( only if volte working in OOS then it will work in lineage via this method )
That's it.
Click to expand...
Click to collapse
I am trying understand your approach
Could you clarify ." wipe all partitions except internal, recovery" ? when i go to wipe, i can exclude 'interanl storage' but where is 'recovery' ?
If i am not wrong, you did dirty flash on 9.0.6 with LOS 17.1?
and i was on 9.0.6 and clean flashed LOS 17.1..
Muralidharc22 said:
I am trying understand your approach
Could you clarify ." wipe all partitions except internal, recovery" ? when i go to wipe, i can exclude 'interanl storage' but where is 'recovery' ?
If i am not wrong, you did dirty flash on 9.0.6 with LOS 17.1?
and i was on 9.0.6 and clean flashed LOS 17.1..
Click to expand...
Click to collapse
Some peoples like to clean using fastboot that's why I said don't remove recovery. Beginners can also understand this terms easily, sorry u didn't. Anyway. Your wish to try or not. Don't show your attitude over this post please. You may leave.
evadon said:
Some peoples like to clean using fastboot that's why I said don't remove recovery. Beginners can also understand this terms easily, sorry u didn't. Anyway. Your wish to try or not. Don't show your attitude over this post please. You may leave.
Click to expand...
Click to collapse
Not sure what made you to think i am showing attitude bro..not at all., sorry if have sounded like questioning your inputs.. I am just trying to be clear before flashing as keep trying our different methods for the last 1 week to have stable Volte/LTE but without any luck..
It would be of great help if you can clarify all the steps as requested,i am going to try out..i am also a beginner here, really ..
Muralidharc22 said:
Not sure what made you to think i am showing attitude bro..not at all., sorry if have sounded like questioning your inputs.. I am just trying to be clear before flashing as keep trying our different methods for the last 1 week to have stable Volte/LTE but without any luck..
It would be of great help if you can clarify all the steps as requested,i am going to try out..i am also a beginner here, really ..
Click to expand...
Click to collapse
Try and see bro.
evadon said:
Try and see bro.
Click to expand...
Click to collapse
Didn't work for me..switched to Pixel Experience ROM where everything works.. pretty easy to flash PE if you are on LOS already
Didn't work for me though.
Clean flashed OOS 9.0.6
Volte enabled as per *#*#4636#*#*
fastboot oem unlock
fastboot boot twrp-3.4.0.img
Flash Lineageos nightly
Flash gapps
Flash 9.0.6 modem/firmware (just in case)
fastboot oem lock
No Volte on reboot :-(
Sorry for resurrecting this old thread, but i followed the steps and it didn't work. I too have airtel sim. On fresh install of OOS, I can see volte icon and volte working, but as soon as i booted into lineageos, it was gone :/ Anyone had any luck with airtel?
Related
Folks,
Seeing alot of comments about bootloops, etc after trying to install the new stable OOS Oreo release.
I went through the same issue myself and found the following method to work best.
PLEASE NOTE: I'm not responsible if this does Any type of damage or issues to your device.
Be sure to backup all you need to back up to your PC.
1. Complete wipe of phone.
2. Flash the stock recovery that was used for reverting from Oreo Beta to Nougat. http://oxygenos.oneplus.net.s3.amazonaws.com/OP5_recovery.img
3. Wipe everything again.
4. Sideload new Oreo release. (Credit @HatRiGt, https://drive.google.com/open?id=1NW5zyUOL6bWgUWozFGLiutzud203npKp)
5. Reboot to bootloader and flash the Chinese TWRP. https://drive.google.com/open?id=1AKbC4HB0h4rEldQUowWGdyM4iYBVV--7
6. Reboot to recovery and flash Magisk. I flashed the 14.6 version and haven't found any issues yet. (https://forum.xda-developers.com/attachment.php?attachmentid=4366826&d=1513897917)
7. Boot phone.
I cannot promise this will work for you, but it has done the job for me.
Running Oreo Stable with Magisk 14.6 and restored all apps from Titanium Backup that I saved on my PC.
I highly suggest blu_spark TWRP instead of chinese one, and i think this method is ONE of the other working way
Couldn't get mine to work with blu spark, hence why I had to use chinese
Link for Chinese twrp please
Thank you very much, work for me
Make a video of it please
New Magisk v.15.
Thanks to topjohnwu.
joecaesar said:
Link for Chinese twrp please
Click to expand...
Click to collapse
Added to OP.
All is well. And with google Drive almost all data is back.
Nice & easy workaround..
Step 5 has to be : install TWRP on fastboot mode...
@hallo dare
Any chance you can make a very detailed video about this process?
cultofluna said:
Nice & easy workaround..
Step 5 has to be : install TWRP on fastboot mode...
Click to expand...
Click to collapse
Yes, sorry. Amended text now.
lvints said:
@hallo dare
Any chance you can make a very detailed video about this process?
Click to expand...
Click to collapse
No real need for a video mate, just follow the post step by step and you're golden!
I can not sideload Oreo zip, it says can not read
Lvsitano said:
I can not sideload Oreo zip, it says can not read
Click to expand...
Click to collapse
You should try changing the TWRP
If you have problems with adb sideload:
Boot into fastboot and install stock .
Unlock/Lock your Phone and unlock it again. Locking will wipe the whole phone.
After this you can make a clean installation.
Reboot to bootloader and flash the Chinese TWRP and boot to Recovery.
Install the oreo.zip file.
Reboot to System.
Make your Setup: WLAN, GMail Account aso.....
After all boot to Recovery and install Magisk
Very easy, put oreo zip file in the root folder, backup all data, flash stock recovery, boot with stock recovery, wipe cache, upgrade internal..., Select oreo zip file and flash it, then back and select wipe, select erase every thing and reboot. Done.
Thank you so much! I finally got it working. I needed to do a factory wipe and skip the magisk installation but it worked!
Cheers!
nikoeuren said:
Thank you so much! I finally got it working. I needed to do a factory wipe and skip the magisk installation but it worked!
Cheers!
Click to expand...
Click to collapse
Magisk won't flash on stock recovery, if that's the reason you had to skip installing it.
hallo dare said:
Magisk won't flash on stock recovery, if that's the reason you had to skip installing it.
Click to expand...
Click to collapse
No I installed the TWRP and flashed magisk. It refused to boot so I factory swiped it and all was good. Now I have to figure out how to install magisk without getting into bootloop.
Sent from my ONEPLUS A5000 using Tapatalk
Hey Guys, i want to share the manual update to Oreo Beta and Treble rom installation with you.
Perform everything to the letter.
EMUI 8 USERS
-Download @HassanMirza01 TWRP Image. www.hassanmirza01.blogspot.it/p/elite-twrp.html
-Download update.zip.
-Download update_data_full_public.zip (rename to ''update_data_public'').
-Download update_full_PRA-L11_hw_eu.zip (rename to ''update_all_hw'').
-Download HuRUpdater from forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279.
Put them (all 4 zip files) on a new folder called Oreo in external_sd.
1 : Flash Twrp from bootloader.
2 : Boot into twrp, click install, select HuRUpdater.zip.
3 : Reboot.
4 : Done.
Want install Treble rom on it?
1 : Download a Trebre GSI desired and put it on sdcard.
2 : Install twrp oreo version: www.drive.google.com/open?id=1rlQPRP234PoXY_yqup3oK_joOZGSIker, to flash use ''fastboot flash recovery_ramdisk Oreotwrp.img''.
3 : In twrp oreo, click on install, install image and select the GSI image and install to a ''system image'' partition.
4 : Wipe and Format Data to f2fs, wipe cache/dalvik/internal storage and reboot.
5 : Reboot and pray.
For troubleshooting look here.
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
CREDITS :
@HassanMirza01 for TWRP stuff.
@Atarii
@zxz0O0 For his new flashing tool.
IUME TEAM (@Askuccio_DROID, @Axan @Spectrothedragon @Trail Road @LastStandingDroid @Wire1122 @Razor10707 @dil3mm4.dev ) That provide me nocheck recovery.
Did you find any bugs on the AOSP ROM?, I'm thinking of flashing this now
Also, Did you tried the treble RR 6.0.0 ROM?
joaoj1999 said:
Did you find any bugs on the AOSP ROM?, I'm thinking of flashing this now
Also, Did you tried the treble RR 6.0.0 ROM?
Click to expand...
Click to collapse
No bugs for now , all working fine.
I have not tried it yet.
I don't understand ..
I followed all the steps, but it installed stock EMUI 5 with Android 7..
Now, at boot, it says "Failed verification", and it won't let me install twrp, even if bootloader looks unlocked
raiden99 said:
I don't understand ..
I followed all the steps, but it installed stock EMUI 5 with Android 7..
Now, at boot, it says "Failed verification", and it won't let me install twrp, even if bootloader looks unlocked
Click to expand...
Click to collapse
I pass to ALOO without lost frp, bl or imei. I will post screenshots here once done oreo step :fingers-crossed:
Current situation ..
raiden99 said:
I don't understand ..
I followed all the steps, but it installed stock EMUI 5 with Android 7..
Now, at boot, it says "Failed verification", and it won't let me install twrp, even if bootloader looks unlocked
Click to expand...
Click to collapse
You installed it from PRA-AL00XC01B220? Are you sure that you picked the correct update.zip of b320? I don't think...
Fr0nK said:
You installed it from PRA-AL00XC01B220? Are you sure that you picked the correct update.zip of b320? I don't think...
Click to expand...
Click to collapse
Probably I didn't install it correctly. What should I do now?
raiden99 said:
Probably I didn't install it correctly. What should I do now?
Click to expand...
Click to collapse
Idk what you want to do.
I want to install EMUI 8, but I'm not able to flash twrp because it fails.. even if the bootloader results unlocked.
raiden99 said:
I want to install EMUI 8, but I'm not able to flash twrp because it fails.. even if the bootloader results unlocked.
Click to expand...
Click to collapse
Are you in nougat or in oreo? If you are in nougat you have to digit fastboot flash recovery NAMEOFRECOVERYYYYYY.img and not fastboot flash recovery_ramdisk NAMEOFRECOVERYYYY.img
raiden99 said:
View attachment 4466545
current situation ..
Click to expand...
Click to collapse
why you want to install a chinese version if i tell that you have to rebrand to a honor 8 lite al00?
Delete
DarkJoker360 said:
Delete
Click to expand...
Click to collapse
for me isn't work, follow the steps to the letter. I just done from c432 to al00. wasn't able to flash oreo also tried to echo command from both elite twrp and mine..I'm trying as latest time.
haky 86 said:
for me isn't work, follow the steps to the letter. I just done from c432 to al00. wasn't able to flash oreo also tried to echo command from both elite twrp and mine..I'm trying as latest time.
Click to expand...
Click to collapse
This is the reason why i don't give support to rebranding . I tried so many times before getting the final result. Hope you will achieve that.
- none here -
Fr0nK said:
Since nobody manages to install this and finds many problems in doing so; failing to support everyone. If nobody besides me can install emui8 and treble rom, i delete the guide
Click to expand...
Click to collapse
Pls don't delete this guide I really want to try it later. I'm just little bit worried about bricking my device.
Why you don't just describe how you rebranded your device? Maybe this will help
MIcHiJK said:
Pls don't delete this guide I really want to try it later. I'm just little bit worried about bricking my device.
Why you don't just describe how you rebranded your device? Maybe this will help
Click to expand...
Click to collapse
Too complex(but easy) , too many different situations, can't support this. Sorry.
Fr0nK said:
Too complex(but easy) , too many different situations, can't support this. Sorry.
Click to expand...
Click to collapse
Take your time, but I'm willing to read that too, no matter how "complex"
I successfully installed oreo on my device but now i have a problem. I can't install working gapps. I used amr64 8.0 opengapps but they crash when i try to put my google account so i can't use google play store or any other google service. I also tried GSM install but it's not working. how to fix?
The question speaks for itself,I cannot find really any accurate ways to get started because I once tried to install Oreo beta (before official was out) and flashed a Oreo recovery onto Nougat and bricked my phone,and the only way was to use DC Phoenix so for now I have kept my phone on EMUI 8 stock.
So if anyone can tell me the steps to install let's say an Android 8.1 Treble ROM or Android 9 when it gets good as a daily driver,I know that you need to do the following things:
-unlock the bootloader
-install a recovery
-flash a ROM through fastboot or through recovery and after that flash Gapps and a modded version of Magisk
That is pretty self explanatory,but I have seen like that you cannot use TWRP since there is a problem when wiping data and that you need to have Huawei stock recovery and some important things to consider since I see it is pretty easy to brick these phones if you don't follow instructions but since there isn't really clear instructions to do some of these things,I am asking here if anyone can explain to me.
And yes,I do have my bootloader unlock code since as I stated,I tried to do this before.
dinoderda said:
The question speaks for itself,I cannot find really any accurate ways to get started because I once tried to install Oreo beta (before official was out) and flashed a Oreo recovery onto Nougat and bricked my phone,and the only way was to use DC Phoenix so for now I have kept my phone on EMUI 8 stock.
So if anyone can tell me the steps to install let's say an Android 8.1 Treble ROM or Android 9 when it gets good as a daily driver,I know that you need to do the following things:
-unlock the bootloader
-install a recovery
-flash a ROM through fastboot or through recovery and after that flash Gapps and a modded version of Magisk
That is pretty self explanatory,but I have seen like that you cannot use TWRP since there is a problem when wiping data and that you need to have Huawei stock recovery and some important things to consider since I see it is pretty easy to brick these phones if you don't follow instructions but since there isn't really clear instructions to do some of these things,I am asking here if anyone can explain to me.
And yes,I do have my bootloader unlock code since as I stated,I tried to do this before.
Click to expand...
Click to collapse
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
What is gsi?
JoanSB1 said:
What is gsi?
Click to expand...
Click to collapse
Generic System Image.
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
And if I have downloaded a zipped ROM instead of an GSI,I do the same steps but in TWRP I flash the ROM with the Gapps and Magisk,right?
Also,can I use NoCheckRecovery for Oreo when I need to wipe data instead of stock recovery since I think it would come in handy if I would need to re-flash something through that without Huawei checks and it seems to be easier to find?
And I flash the recoveries to recovery_ramdisk,just to be sure,I know some things did change with Oreo so I am asking?
dinoderda said:
And if I have downloaded a zipped ROM instead of an GSI,I do the same steps but in TWRP I flash the ROM with the Gapps and Magisk,right?
Also,can I use NoCheckRecovery for Oreo when I need to wipe data instead of stock recovery since I think it would come in handy if I would need to re-flash something through that without Huawei checks and it seems to be easier to find?
And I flash the recoveries to recovery_ramdisk,just to be sure,I know some things did change with Oreo so I am asking?
Click to expand...
Click to collapse
what rom are you trying to install?
All treble roms come in a .img file not a .zip.
MrViking said:
what rom are you trying to install?
All treble roms come in a .img file not a .zip.
Click to expand...
Click to collapse
Oh,I thought Pixel Experience ROM was meant to be installed through recovery,bloody hell pardon me.
Never mind then.
I am gonna wait for Android 9 to get a bit more stable and that official OpenGapps gets released and then I am going to install it.
Thank you very much for helping me!
dinoderda said:
Oh,I thought Pixel Experience ROM was meant to be installed through recovery,bloody hell pardon me.
Never mind then.
I am gonna wait for Android 9 to get a bit more stable and that official OpenGapps gets released and then I am going to install it.
Thank you very much for helping me!
Click to expand...
Click to collapse
Thats ok, we all make mistakes lol.
Yeah, a pixel experience 9.0 gsi is coming soon, and these GSI's are pretty stable. If you need any more help you can ask me:good:
MrViking said:
Here is how to do it:
Download the gsi
Open fastboot mode
Flash stock recovery
Boot to recovery and wipe data
Flash The new rom in fastboot
Flash TWRP also
Boot to twrp and flash gapps/magisk etc
Reboot to system
Click to expand...
Click to collapse
I did those steps trying to flash RROS6 build BENVENUTI (https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-rros-pra-t3774444) and I failed. I don't know what I'm doing wrong. Please help me to install Resurrection Remix! :crying:
JoanSB1 said:
I did those steps trying to flash RROS6 build BENVENUTI (https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-rros-pra-t3774444) and I failed. I don't know what I'm doing wrong. Please help me to install Resurrection Remix! :crying:
Click to expand...
Click to collapse
What is the exact problem you aee having? Bootloop? Error when trying to flash?
dinoderda said:
What is the exact problem you aee having? Bootloop? Error when trying to flash?
Click to expand...
Click to collapse
Error when trying to flash
JoanSB1 said:
Error when trying to flash
Click to expand...
Click to collapse
Tell me the steps in order which you did when you were trying to flash the ROM.
dinoderda said:
Tell me the steps in order which you did when you were trying to flash the ROM.
Click to expand...
Click to collapse
Ok, it clearly says that that Rom is discontinued, read the last post.
Use a gsi from the treble enabled device development forum and flash it with fastboot (yesyou can use android pie 9.0 gsi's as well as long as they don't say sGSI on it.
MrViking said:
Ok, it clearly says that that Rom is discontinued, read the last post.
Use a gsi from the treble enabled device development forum and flash it with fastboot (yesyou can use android pie 9.0 gsi's as well as long as they don't say sGSI on it.
Click to expand...
Click to collapse
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
JoanSB1 said:
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
Click to expand...
Click to collapse
Use ones from the treble enabled device forum. You can even use pie, so why not?
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
JoanSB1 said:
Wow, if that ROM is discontinued I'll desist to install it then. So I'll try to install Lineage OS 15.1. You recommend it ? This is the post that I'm seeing https://forum.xda-developers.com/p8...nt/rom-lineageos-15-1-hi6250-devices-t3811583
Click to expand...
Click to collapse
Here is an android P gsi for this device. It works very well:
https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Can I install anything with lock bootloader?
box710 said:
Can I install anything with lock bootloader?
Click to expand...
Click to collapse
no
MrViking said:
Use ones from the treble enabled device forum. You can even use pie, so why not?
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
Here is an android P gsi for this device. It works very well:
https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
Does the USSD code work? is that it is important to me and I do not know a ROM that works
dinoderda said:
Generic System Image.
Click to expand...
Click to collapse
Is there a guide to install this I paid DC unlock to get bootloader unlocked but on noughat and cannot find a twrp for noughat:good:
Pie gsi
Hi all,
I have installed Pixel Experience (Oreo) gsi ROM no problem. But if I try to flash any Pie gsi ROM it just goes into a boot loop. I flash system via fastboot and seems OK. Reboot and it just boot loops a few times and goes to the recovery screen that prompts to download and install the standard system.
Has anybody come across this or have any suggestions. I have tried a few different Pie gsi ROMs and same thing happens.
Thanks
Mick
I think, that im not the only one who is facing problems installing the Erfan OEM GSIs on our Mi A2
Ive tried OOS and it wont get to the Oneplus Bootanimation
Same with the other GSIs
Instuctions i used are:
1.Install stock Boot.img and stock Vendor.img
2. install the OOS AB GSI as System image
3. install permissiver2 ZIP
But it wont Boot
If there is anybody who got it working please reply to this topic since there is no real Installation process for our device
I follow this post
https://www.xda-developers.com/install-android-q-beta-gsi-project-treble/
No problem during installation but when it finished, it only reboot to recovery,.. Nothing more
Aziziamran said:
I follow this post
https://www.xda-developers.com/install-android-q-beta-gsi-project-treble/
No problem during installation but when it finished, it only reboot to recovery,.. Nothing more
Click to expand...
Click to collapse
So for you IT wont Work too
StarSix01 said:
So for you IT wont Work too
Click to expand...
Click to collapse
I get it to working and booted fire, trust me you don't need , too much bugs and soft reboot every 5 mins,,
fir1996 said:
I get it to working and booted fire, trust me you don't need , too much bugs and soft reboot every 5 mins,,
Click to expand...
Click to collapse
How you got IT working im Just curious
StarSix01 said:
How you got IT working im Just curious
Click to expand...
Click to collapse
Pls don't even try it, i flashed it over lineage 16 vendor then factory reset using fastboot -w,, then flash permissiver.zip , that's it,
Very buggy experience, camera not working, google play crashing , device soft reboot every 5 mins, phone calls through speaker only,,
fir1996 said:
Pls don't even try it, i flashed it over lineage 16 vendor then factory reset using fastboot -w,, then flash permissiver.zip , that's it,
Very buggy experience, camera not working, google play crashing , device soft reboot every 5 mins, phone calls through speaker only,,
Click to expand...
Click to collapse
Sounds bad tho.. By the way, did you notice any new changes compared to pie?
fir1996 said:
Pls don't even try it, i flashed it over lineage 16 vendor then factory reset using fastboot -w,, then flash permissiver.zip , that's it,
Very buggy experience, camera not working, google play crashing , device soft reboot every 5 mins, phone calls through speaker only,,
Click to expand...
Click to collapse
Which lineage 16 you used?
StarSix01 said:
Which lineage 16 you used?
Click to expand...
Click to collapse
The one here on xda,
fir1996 said:
The one here on xda,
Click to expand...
Click to collapse
Is IT the only working vendor ?
StarSix01 said:
Is IT the only working vendor ?
Click to expand...
Click to collapse
Yeah, but dude trust me don't try it, it's super buggy
I successfully installed Oxygen OS OEM GSI on the Mi A2 and it's running late flawlessly
Only bugs that I noticed are:
Fingerprint not working and faceunlock not working
Brightness is a bit ****ed up, but usable
StarSix01 said:
I successfully installed Oxygen OS OEM GSI on the Mi A2 and it's running late flawlessly
Only bugs that I noticed are:
Fingerprint not working and faceunlock not working
Brightness is a bit ****ed up, but usable
Click to expand...
Click to collapse
Now we are waiting for tutorial
Ir works well, Google play crashing you can resolve updating Google play services with apk.
0. I would recommend To Format Data completely and copy the files from your PC to the Phone then
1. Flash boot.img as boot img and vendor.img as vendor.img in TWRP
2. Flash the OxygenOS ABGSI as System Img
3. wipe Data
4. Flash FBE Disabler
5. Flash permissiver2 (don't know if this is nessesary but it did it)
6. Flash the Latest Hex Kernel by Draco
7. Flash Magisk
8. Reboot
And don't forget to wipe cache and dalvik always
StarSix01 said:
0. I would recommend To Format Data completely and copy the files from your PC to the Phone then
1. Flash boot.img as boot img and vendor.img as vendor.img in TWRP
2. Flash the OxygenOS ABGSI as System Img
3. wipe Data
4. Flash FBE Disabler
5. Flash permissiver2 (don't know if this is nessesary but it did it)
6. Flash the Latest Hex Kernel by Draco
7. Flash Magisk
8. Reboot
And don't forget to wipe cache and dalvik always
Click to expand...
Click to collapse
I used Dec update vendor.img and boot.img
Any fix for fingerprint issue?
which stock rom did you tried ? i dont remember but 10.0.2.0 or 9.6.16.0 i manage to boot coloros, miui and nubia. also i installed force encyrpt disable but i dont think it is necessary
q0kHaN said:
which stock rom did you tried ? i dont remember but 10.0.2.0 or 9.6.16.0 i manage to boot coloros, miui and nubia. also i installed force encyrpt disable but i dont think it is necessary
Click to expand...
Click to collapse
latest
Divyam2201 said:
Any fix for fingerprint issue?
Click to expand...
Click to collapse
its not working?
{Mod edit}
All sources gonna be linked here within two days
We will share all ours sources for team win as contribution to development on XDA
SOURCES: SOON
Is Decrypt working in oxygen os with this recovery?
Jackass94 said:
Is Decrypt working in oxygen os with this recovery?
Click to expand...
Click to collapse
No, sorry. Its still work in progress. Decryption is working only on custom roms for now
Does this TWRP stick once flashed, or device defaults back to stock recovery once flashing is over?
elmor0 said:
Does this TWRP stick once flashed, or device defaults back to stock recovery once flashing is over?
Click to expand...
Click to collapse
Depends on what your flashing
Custom ROMs
I will install in OOs Stock 10.0.8... Thanks.
jotha.dx said:
I will install in OOs Stock 10.0.8... Thanks.
Click to expand...
Click to collapse
It doesnt work with stock OOS AFAIK
EugenStanis said:
It doesnt work with stock OOS AFAIK
Click to expand...
Click to collapse
Afh... Thank you... I won't even try then....
Sent from my OnePlus7TPro Global using XDA Labs
I am waiting the custom oos
ricky886 said:
I am waiting the custom oos
Click to expand...
Click to collapse
What is that supposed to mean?
this doesn't decrypt SDcard aka "Data" iam on Resurrection remix any solution? i want to remove a magisk module that caused a bootloop
mastrok said:
this doesn't decrypt SDcard aka "Data" iam on Resurrection remix any solution? i want to remove a magisk module that caused a bootloop
Click to expand...
Click to collapse
Use the stock recovery with adb shell enabled.
Or flash the stock boot.img, enable adb debugging and flash the Magisk patched boot.img.
If adb debugging is enabled skip the upper part, use a PC and enter:
Code:
adb wait-for-device shell magisk --remove-modules
Done.
mastrok said:
this doesn't decrypt SDcard aka "Data" iam on Resurrection remix any solution? i want to remove a magisk module that caused a bootloop
Click to expand...
Click to collapse
alright i needed to have working system for this to decrypt. i installed the stock boot image system worked. then restarted now it decrypts
i can confirm this really works like back in the days when i used it in samsung galaxies
I van confirm that this works. It's installed and I made a backup with it. Nice work!!
EugenStanis said:
It doesnt work with stock OOS AFAIK
Click to expand...
Click to collapse
It does work
I have flashed the OOS 10.0.8 BA on OnePlus 7T PRO
I have cleared the phone with TOOL ALL IN ONE
I was in a bootloop when I have flashed the stock image
Then I have tried to wipe cache/data and it hasn't worked
Then I have made a full wipe through TOOL ALL IN ONE
In a magical way its worked. But I would like to test it to see what are the full steps to make it work. But I am sure that this has worked and I have now an operated Oneplus 7t Pro.
I think that its something about having 2 different OS in one smartphone and you have to clear it to delete the old.
But It is working
Alexisd1 said:
It does work
I have flashed the OOS 10.0.8 BA on OnePlus 7T PRO
I have cleared the phone with TOOL ALL IN ONE
I was in a bootloop when I have flashed the stock image
Then I have tried to wipe cache/data and it hasn't worked
Then I have made a full wipe through TOOL ALL IN ONE
In a magical way its worked. But I would like to test it to see what are the full steps to make it work. But I am sure that this has worked and I have now an operated Oneplus 7t Pro.
I think that its something about having 2 different OS in one smartphone and you have to clear it to delete the old.
But It is working
Click to expand...
Click to collapse
It DOES WORK but decryption is not working so it is useless
EugenStanis said:
It DOES WORK but decryption is not working so it is useless
Click to expand...
Click to collapse
Decryption isnt working in any TWRP right now. The official TWRP when will be out( I dont know when) it will have decryption. But in this TWRP i am focusing to the way of installing a stock OOS.You can just simply boot the twrp and not flash it. After flashing the stock OOS you can use the stock recovery that will be encrypted and you will not have any problem. Now we have these solutions or the harder solutions like flashing with adb commands etc.
Alexisd1 said:
Decryption isnt working in any TWRP right now. The official TWRP when will be out( I dont know when) it will have decryption. But in this TWRP i am focusing to the way of installing a stock OOS.You can just simply boot the twrp and not flash it. After flashing the stock OOS you can use the stock recovery that will be encrypted and you will not have any problem. Now we have these solutions or the harder solutions like flashing with adb commands etc.
Click to expand...
Click to collapse
You are wrong, decrpytion is working for me on this TWRP.