Hi,
My previous phone was a Xperia Active with lots of mods. One of the mods were the toggles in the SystemUI (in the notification screen).
On the S3 mini it's not possible to select which toggles are selectable and in which order.
So I thought, lets install PowerToggles from the play store.
But then I have two rows of toggles. Just a little bit too much.
So, is there a SystemUI around (JB 4.1.2) with selectable toggles? (And is it important if this is deodex or not? I'm on stock ROM)
If not, is it hard to make a SystemUI without any toggles and free up the space they take in the top of the notification screen (so you can install PowerToggles, which are selectable).
Thanks.
No, you cannot that easily.
Assuming you have already rooted your device, if you want some adventure, follow this guide to edit / add extra buttons toggles, http://forum.xda-developers.com/showthread.php?t=2191593.
Else, if you are lazy as I am, here's what I have done to have 12 toggles (though, it does not include 2g/3g switcher) in my stock (rooted) ROM:
wifi
data
bluetooth
gps
sound
autorotation
block mode
battery save
drive mode
smart stay
syncro
airplane mode
To get this, follow these instructions:
1. download Dmod 6 (http://forum.xda-developers.com/showthread.php?t=2165575)
2. Open (do not unzip) DMod6's ROM using WinRAR, browse to system/app folder then copy SettingUI.apk,
3. open up Root explorer / ES file manager, etc
4. BACKUP your current SystemUI.apk and .odex (or simply move them on your SDcard and rename them SystemUI.BKPapk and SystemUI.BKPodex.
5. delete SystemUI.apk and SystemUI.odex (the original files, NOT the backups )
6. paste the copied SettingUi.apk in your system/app folder: I set permissions as -rwxrwxrwx , not sure if it would be better as -rw-r--r--, anyway, it works perfectly like this.
7. reboot, breakfast is ready
If you get some error popup messages between points 3 and 5, no worries, go on, follow the steps, reboot.
If this should not eventually work: sorry for you, just delete SystemUI.apk, restore the backups.
Have fun, hopefully I helped you out. :highfive:
hermanj said:
Hi,
My previous phone was a Xperia Active with lots of mods. One of the mods were the toggles in the SystemUI (in the notification screen).
On the S3 mini it's not possible to select which toggles are selectable and in which order.
So I thought, lets install PowerToggles from the play store.
But then I have two rows of toggles. Just a little bit too much.
So, is there a SystemUI around (JB 4.1.2) with selectable toggles? (And is it important if this is deodex or not? I'm on stock ROM)
If not, is it hard to make a SystemUI without any toggles and free up the space they take in the top of the notification screen (so you can install PowerToggles, which are selectable).
Thanks.
Click to expand...
Click to collapse
Thanks for you answer.
The first option is a bit too adventures for me (no, I'm too lazy to find out how to decompile/compile. I'm on Win7 don't know if I need to install Linux for that).
Second option is mmmwwwhhhaaa, a bit in the right direction, but not exactly as I like it. Cause I'd like to change the toggles now and then. And still no Flashlight/Torch.
But your post made me find a third option: I found that detexr made a no-toggles SystemUi already here:http://forum.xda-developers.com/showthread.php?t=2191593&page=4
Just asked him for to post his SystemUi.
I've just rooted my phone and installed the Virginity rom and here are my two questions :
1. When I change system font, it applies to everything except for keyboard - is it normal? Is there any way to make font change affect the keyboard ?
2. I like s3mini digital clock more than s4 one, so before flashing I did a backup of the stock rom, got DigitalClock.apk from it but I cant to get it working on virginity.
First I've deleted s4 digital clocks from system/aps folder so there would be no conflicts, and then placed the s3 DigitalClock.apk there, but it wont show up in the widgets menu even after the reboot.
When I tried to install it normally, instead of hard-copying it there, the message says that installation was successful but its still not on the widgets list, it doesnt even appear in system/aps. How can I get it to work?
krzym1 said:
I've just rooted my phone and installed the Virginity rom and here are my two questions :
1. When I change system font, it applies to everything except for keyboard - is it normal? Is there any way to make font change affect the keyboard ?
2. I like s3mini digital clock more than s4 one, so before flashing I did a backup of the stock rom, got DigitalClock.apk from it but I cant to get it working on virginity.
First I've deleted s4 digital clocks from system/aps folder so there would be no conflicts, and then placed the s3 DigitalClock.apk there, but it wont show up in the widgets menu even after the reboot.
When I tried to install it normally, instead of hard-copying it there, the message says that installation was successful but its still not on the widgets list, it doesnt even appear in system/aps. How can I get it to work?
Click to expand...
Click to collapse
I guess you didnt change the system permissions just change the permissions rw-r-r then reboot
If I have helped you... dont just say thanks...HIT the thanks button..!!:good:
Permissions were rw-rw-r by default so that sadly didnt help
HELP
did u find to fix already?
Hello.
I have a device with a version of Android 4.4.4 KitKat modified, was not I who made the change, but it has two things that bother me a lot.
My device does not have the phone function and yet I have the CARD SIM icon appearing in the quick settings drop-down menu.
In the settings there is no option to edit as is common in Samsung.
I do not like to use the Xposed modules it would have to leave the app installed for this.
I wish someone would help me remove this by editing the rom files SystemUI, I know this is possible but do not have enough knowledge to run alone.
This is in place until TWRP is ready. You need root and of course you need to be attached to your PC. On first installation of systemui base, a pop-up asking to give ADB shell root permission will show. Please do so.
The purpose of this installer is to generate for you a custom module that you can flash in Magisk Manager. It will have all the mods that you have selected from the installer menu.
Custom clocks (date, etc) and internet speed indicators do not change colors due to light-dark background colors like the statusbar icons do.
The developer of Active edge gave me permission to use his base so that people would not have to make a choice between his and my mods. All credit for this goes to him. You must delete the active edge sense module and use one of my active edge modules. If it doesn't say active edge then it isn't active edge sense compatible. If there is an issue with edge sense after flashing, do not contact edge sense op with issues. He does not troubleshoot modified versions of his mod (and neither do I).
I'm also including my Pixel Launcher mod. Also a ADB Installer. You can change app drawer background-text color (separately for light mode and dark mode), remove weather from Launcher. Change the number of hot seat icons on home page (and size) as well as change the number of columns in the app drawer.
ADB Installer Instructions-Root is required
1. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work.
2. FLASH ALL THE MODS YOU WANT. ONCE YOU DONE WITH EVERYTHING, FLASH THE "COMPLETE INSTALLATION" Option. This will create a Magisk Manager flashable zip in a folder on your sdcard called ozop. Flash that to install your selection of mods.
Root required
Instructions.
1. Unzip ADB Mods Installer Files.zip on your PC
2. Run TulsadiverModsInstaller.bat (Give ADB Root Permissions)
3. ADB debugging Enabled
4. Flash one of the SystemUI Bases First. They provide the necessary smali files and public ID's for everything to work
5. Go through the other options selecting what all mods you want. It is generally best to start at the top and work your way down.
6. Once finished with selections, run "Complete Installation" at the bottom. This will generate your mymagisk.zip module in a folder called "ozop" on your sdcard.
List of MODS Available
Clock Format and Position Mods
Internet Traffic Speed Single Indicator (changes from upload-download) otherwise signals are over/under
Choose Traffic Speed Indicator Up-Down Icon Colors (default is white)
Navbar Height Options
Navbar Swap
Remove NavBar
3 Minit Battery
One percent custom battery Mods-Several to choose from
One percent custom battery Text-only-Several to choose from
Colored Statusbar-Navbar Icons
Choose number of QS columns 3-7
Colored Statusbar Icons
Remove Carrier Text Options
Smaller LTE Icon
Custom Battery Sizes in case custom batteries are too large or too small
ADB Module maker uploaded 6-30-21
File on MEGA
mega.nz
-------------------------------------------------
If I helped, hit the Thanks Button!
Feeling generous, send me a beer!
--------------------------------------------------
--------------------------------------------------------------------------------------
Pixel Launcher Mod
Start by picking a base. Bases come with, or without, a search bar and Hotseat heights The larger number of rows you pick, the lower your hotseat drops on your home screen. If your hotseat comes out too low, try again with a higher base.
Remove Search Bar
App Drawer background color (Light and Dark Mode)
App Drawer Text Color or remove (Light and Dark Mode)
Home screen App Text Color
Smart-screen Text color
App Icon Sizes 45-50-56 dip (56 is stock)
Columns (5-6-7)
Rows (5 through 11)
Android 11
ADB Pixel Launcher Installer uploaded 3-10-21
NexusLauncherReleaseADBPixelMar.zip | by Tulsadiver for Pixel
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
-------------------------------
Android 10
ADB Pixel Launcher Installer uploaded 6-18-20
https://www.androidfilehost.com/?fid=8889791610682873110
Zip Installer
Unzip zip into a folder on your internal sdcard. The folder name cannot have spaces in it.
Boot TWRP, find your folder. Install base first. Install the mods you want, then flash complete installation zip. Reboot.
TWRP zip Installer
https://www.androidfilehost.com/?fid=8889791610682873111
Uploaded a new installer. Fixed QS column mod. This has been verfied to work on the Pixel 3a XL and compatible with swift installer themes. Undo theme, apply my mods, then reapply theme.
LOL
Great work!
But it took me 3 hours to unzip and download it... Maybe zip it a little more? Ultra ZIP?
---------------------------------------------------------------------------------------------------------------------
it didnt work, i ran a complete installation, now boots, and instantly powers off to a page with
Code:
Can't load android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device.
This is the error in ADB:
Code:
Installing TulsadiverMods
cp: bad '/sdcard/vrthemeADBversion/busybox': No such file or directory
cp: bad '/sdcard/vrthemeADBversion/installtheme.sh': No such file or directory
sh: /data/local/installtheme.sh: No such file or directory
UPDATE: I didn't install base. Now I have another problem... It tries to boot and doesn't, it takes forever, then reboots and gets the first error again...
To uninstall mods do we just flash stock?
Has anyone tried this on the Q beta?
SCrid2000 said:
Has anyone tried this on the Q beta?
Click to expand...
Click to collapse
Here is one for Q5
https://www.androidfilehost.com/?fid=6006931924117921001
Posted an ADB installer for December update.
I guess I am a little confused on how this mod works and I have a hard time risking not having a nonbootable phone. I read through some of the 3 xl thread and it seems like we need our phone connected for it to make a magisk module to which we then flash via magisk? This doesn't actually flash anything, correct?
Mainly, all I need is the back/home buttons swapped, which I have now but it seems the December update breaks that according to another thread.
AutomaticFailure27 said:
I guess I am a little confused on how this mod works and I have a hard time risking not having a nonbootable phone. I read through some of the 3 xl thread and it seems like we need our phone connected for it to make a magisk module to which we then flash via magisk? This doesn't actually flash anything, correct?
Mainly, all I need is the back/home buttons swapped, which I have now but it seems the December update breaks that according to another thread.
Click to expand...
Click to collapse
For just three button mode? You can try flashing this if you like. Do you have active edge installed?
Swapping the two is easy though you need a way to get it on your phone which this should do.
Tulsadiver said:
For just three button mode? You can try flashing this if you like. Do you have active edge installed?
Swapping the two is easy though you need a way to get it on your phone which this should do.
Click to expand...
Click to collapse
Alright, I'll give that a shot when I get time to do the December update. I do not have active edge installed.
January update uploaded.
Is this going to have to be updated during every monthly update? Wish Google would just make it so we could change the positions of the 3 button navigation.
AutomaticFailure27 said:
Is this going to have to be updated during every monthly update? Wish Google would just make it so we could change the positions of the 3 button navigation.
Click to expand...
Click to collapse
Depends on the update. If that is all you want, go to this thread:
https://forum.xda-developers.com/pixel-3a/themes/clock-mods-t4024447
Tulsadiver said:
Depends on the update. If that is all you want, go to this thread:
https://forum.xda-developers.com/pixel-3a/themes/clock-mods-t4024447
Click to expand...
Click to collapse
I'm a little confused on this. These just magisk modules? How do I know what's being swapped?
AutomaticFailure27 said:
I'm a little confused on this. These just magisk modules? How do I know what's being swapped?
Click to expand...
Click to collapse
Back and récents.....yes, they are modules.
Tulsadiver said:
Back and récents.....yes, they are modules.
Click to expand...
Click to collapse
Ohhh, alright. I only want back and home to be swapped.
AutomaticFailure27 said:
Ohhh, alright. I only want back and home to be swapped.
Click to expand...
Click to collapse
You can try these if you are stock.
Stock
https://www.androidfilehost.com/?fid=4349826312261700583
Edge sense stock base
https://www.androidfilehost.com/?fid=4349826312261700584
Tulsadiver said:
You can try these if you are stock.
Stock
https://www.androidfilehost.com/?fid=4349826312261700583
Edge sense stock base
https://www.androidfilehost.com/?fid=4349826312261700584
Click to expand...
Click to collapse
Thanks. I assume I can do this myself with your adb mod installer, correct? I tried messing with it before but now I am two months behind on updates.
AutomaticFailure27 said:
Thanks. I assume I can do this myself with your adb mod installer, correct? I tried messing with it before but now I am two months behind on updates.
Click to expand...
Click to collapse
No, these are stand-alone modules and cannot be mixed with any other SystemUIGoogle.apk module (modification) and is built for January update.
Tulsadiver said:
No, these are stand-alone modules and cannot be mixed with any other SystemUIGoogle.apk module (modification) and is built for January update.
Click to expand...
Click to collapse
Oh yeah, ok, makes sense. I was more saying that if I wanted to do this myself and not have you provide a magisk module each time, then I would use the mod installer and go through that way to create my own?
Hi,so i know on older Android versions it was not possible to change the fonts without root. But i am now wondering if there is not perhaps a way on Android 10 because i remember seeing a fonts folder somewhere in the settings menu. I think it was under display or in developer options,buth there is just one font listed and i would like to know if we cant somehow add others without root?